IIUM Repository

Aliza Aini Md Ralib

Profile Picture

Latest Additions

  1. Md Ralib @ Md Raghib, Aliza 'Aini and Mazlan, Amir Zakwan and Abd. Rahman, Faridah (2025) Development of an IoT-based smart agricultural system for environmental monitoring and soil condition using raspberry pi and mobile interface. In: 2025 IEEE 11th International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA), 10-11 September 2025, KUALA LUMPUR MALAYSIA.
  2. Md Ralib @ Md Raghib, Aliza 'Aini and Zulkefli, Muhammad Syahmi and Abd. Rahman, Faridah and Md Yusoff, Nelidya and Sulong, Mohamad Nurmirza Asyraaf (2025) Electronic nose for evaluation of banana ripeness monitoring. In: 2025 IEEE 11th International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA), 10-11 September 2025, KUALA LUMPUR, Malaysia.
  3. Badrol Hisham, Balqis Nurnadia and Ab Rahim, Rosminazuin and Nordin, Anis Nurashikin and Md Ralib @ Md Raghib, Aliza 'Aini and Za'bah, Nor Farahidah and Tung, Lun Hao and Mohd Zain, Zainiharyati (2025) Electrochemical sensing of nicotine using laser-induced graphene screen-printed electrode. IIUM Engineering Journal, 26 (1). pp. 293-307. ISSN 1511-788X E-ISSN 2289-7860
  4. Muhamad Atan, Muhammad Khairul Faisal and Ab Rahim, Rosminazuin and Nordin, Anis Nurashikin and Md Ralib @ Md Raghib, Aliza 'Aini and Gunawan, Teddy Surya and Mohd Zain, Zainiharyati (2025) Development of 3D-printed serpentine fluidic channel integrated with heating element for loop-mediated isothermal amplification (LAMP) process. IIUM Engineering Journal, 26 (1). pp. 308-323. ISSN 1511-788X E-ISSN 2289-7860
  5. Mohamed Haid, Osob and Md Ralib @ Md Raghib, Aliza 'Aini and Ab Rahim, Rosminazuin and Mat Harttar @ Mohd Hatta, Maziati Akmal and Ahmad, Farah (2024) Design and analysis of vibration-based piezoelectric energy harvester. In: 9th International Conference on Mechatronics Engineering (ICOM 2024), 13th - 14th August 2024, Kuala Lumpur, Malaysia.
  6. Nor Asmadi, Muhammad Adhwa Fathullah and Md Ralib, Aliza Aini and Saidin, Norazlina and Nordin, Anis Nurashikin (2024) Optimization of hydrothermally grown ZnO nanorods on flexible fabric using finite element simulation and single precursor for wearable nanogenerator. Journal of Materials Science: Materials in Electronics, 35 (35). pp. 1-20. ISSN 0957-4522
  7. Haid, Osob Mohamed and Md Ralib @ Md Raghib, Aliza 'Aini and Ab Rahim, Rosminazuin and Mohd Hatta, Maziati Akmal and Ahmad, Farah (2024) Development of signal conditioning circuit for piezoelectric energy harvester. In: 2024 9th International Conference on Mechatronics Engineering (ICOM), 13-14 August 2024, Kulliyyah of Engineering, IIUM.
  8. Maizal Hairi, Nur Iffah Irdina and Md Ralib @ Md Raghib, Aliza 'Aini and Nordin, Anis Nurashikin and Mohamad Yunos, Muhammad Farhan Affendi and Ming, Lim Lai and Tung, Lun Hao and Samsudin, Zambri (2024) Recent advance in using eco-friendly carbon-based conductive ink for printed strain sensor: a review. Cleaner Materials, 12. pp. 1-19. ISSN 2772-3976
  9. Zainuddin, Ahmad Anwar and Bhattacharjee, Soumik and Md Ralib, Aliza Aini and Mohd Sukri, Nurain Sufi Sabreena and Binti Kamarudin, Saidatul Izyanie and Subramaniam, Krishnan and Handayani, Dini Oktarina Dwi and Reyasudin Basir Khan, M. and Nik Mohd. Kamal, Nik Nor Muhammad Saifudin (2023) Optimization of multi-channel quartz crystal microbalance for Gas Sensing Application. In: 2023 IEEE 8th International Conference on Recent Advances and Innovations in Engineering (ICRAIE), 02-03 December 2023, Kuala Lumpur, Malaysia.
  10. Badrol Hisham, Balqis Nurnadia and Md Ralib @ Md Raghib, Aliza 'Aini and Nordin, Anis Nurashikin and Tung, Lun Hao and Ab Rahim, Rosminazuin and Mohd Zain, Zainiharyati (2023) Performance evaluation of Laser-Induced Screen Printed Electrodes for electrochemical detection. In: ICSIMA 2023 The 9th IEEE International Conference on Smart Instrumentation, Measurement and Applications 2023, 17-18 October 2023, Kuala Lumpur, Malaysia.
  11. Abdull Jalal Khan, Siti Mashitah and Lukman Hekiem, Nurul Liyana and Md Ralib @ Md Raghib, Aliza 'Aini and Saidin, Norazlina (2023) Pencil graphite on paper: facile approach for fabrication of flexible strain sensors. In: ICSIMA 2023 The 9th IEEE International Conference on Smart Instrumentation, Measurement and Applications 2023, 17-18 October 2023, Kuala Lumpur, Malaysia.
  12. Saidin, Norazlina and Harith, Nur Farizah and Mohd. Ramli, Huda Adibah and Md Ralib @ Md Raghib, Aliza 'Aini and Abdul Malek, Norun Farihah (2023) Macro-bending effect of single-mode fiber for glucose sensor. In: 9th International Conference on Computer and Communication Engineering (ICCCE 2023), 15th - 16th August 2023, Kuala Lumpur, Malaysia.
  13. Mohamad Yunos, Muhammad Farhan Affendi and Nordin, Anis Nurashikin and Md Ralib @ Md Raghib, Aliza 'Aini and Samsudin, Zambri and Lim, Lai Ming (2023) Characterization and fabrication of piezoelectric energy harvesting ZnO nanorod on textile by hydrothermal method. In: IEEE International Conference on Sensors and Nanotechnology (SENNANO 2023), 26th - 27th September 2023, Putrajaya, Malaysia.
  14. Nor Asmadi, Muhammad Adhwa Fathullah and Md Ralib @ Md Raghib, Aliza 'Aini and Nordin, Anis Nurashikin and Saidin, Norazlina (2023) Finite element simulation of single Zinc Oxide nanorod for piezoelectric nanogenerator. In: 14th IEEE Regional Symposium on Micro and Nanoelectronics (RSM 2023), 28th - 30th August 2023, Langkawi, Malaysia.
  15. Maizal Hairi, Nur Iffah Irdina and Md Ralib @ Md Raghib, Aliza 'Aini and Nordin, Anis Nurashikin and Ab Rahim, Rosminazuin and Mohamad Yunos, Muhammad Farhan Affendi and Ming, Lim Lai (2023) Chitosan as natural binder for eco-friendly printable conductive ink. In: 2023 IEEE Regional Symposium on Micro and Nanoelectronics (RSM), 28-30 August 2023, Langkawi, Malaysia.
  16. Md Ralib @ Md Raghib, Aliza 'Aini and Mohamad Razali, Nur Fatin and Chatras, Matthieu and Nordin, Anis Nurashikin and Abdul Rahman, Farah Diyana and Pothier, Arnaud and Passerieux, Damien and Guines, Cyril (2023) Enhancement of quality factor in ST-cut quartz surface acoustic wave devices by using different numbers of IDTs and wavelengths for gas sensing. In: 2023 IEEE International Instrumentation and Measurement Technology Conference (I2MTC), 22nd - 25th May 2023, Kuala Lumpur.
  17. Lukman Hekiem, Nurul Liyana and Md Ralib @ Md Raghib, Aliza 'Aini and Mohd Hatta, Maziati Akmal and B Ahmad, Farah and Za'bah, Nor Farahidah (2022) Study of adsorption isotherms in the detection of acetone and isopropyl alcohol using QCM sensor with chitosan sensing layer. In: 2022 IEEE International Conference on Semiconductor Electronics (ICSE), 15-17 August 2022, Kuala Lumpur, Malaysia.
  18. Lukman Hekiem, Nurul Liyana and Md Ralib @ Md Raghib, Aliza 'Aini and Mat Harttar @ Mohd Hatta, Maziati Akmal and Ahmad, Farah and Ab Rahim, Rosminazuin and Za'bah, Nor Farahidah and Sugandi, Gandi (2022) Chitosan coating on quartz crystal microbalance gas sensor for isopropyl alcohol and acetone detection. International Journal of Integrated Engineering, 14 (3). pp. 241-244. ISSN 2229-838X E-ISSN 2600-7916
  19. Maizal Hairi, Nur Iffah Irdina and Md Ralib, Aliza Aini and Ahmad, Farah and Mat Hattar, Maziati Akmal (2022) Synthesis and characterization of different graphite/chitosan ink ratio composition towards flexible strain sensor performance. Journal of Materials Science: Materials in Electronics. ISSN 0957-4522 (In Press)
  20. Lukman Hekiem, Nurul Liyana and Md Ralib, Aliza 'Aini and Mohd Hatta, Maziati Akmal and Ahmad, Farah B. and Ab Rahim, Rosminazuin and Za'bah, Nor Farahidah (2021) Performance Analysis of VOCs Detection using Polyisobutylene and Chitosan Overlayed on QCM Sensor. In: 2021 IEEE Regional Symposium on Micro and Nanoelectronics (RSM), Virtual.

Most Viewed Items

Item titleViews
1Synthesis and characterization of different graphite/chitosan ink ratio composition towards flexible strain sensor performance1399
2Finite element simulation of MEMS piezoelectric energy scavenger based on pzt thin film1151
3Enhanced piezoelectric properties of aluminium doped zinc oxide thin film for surface acoustic wave resonators on a CMOS platform1137
4Effect of chitosan dissolved in different acetic acid concentration towards VOC sensing performance of quartz crystal microbalance overlay with chitosan1135
5Finite element simulation of miniaturized ZnO/Si SAW sensor for rapid detection of dichloromethane gas1105
6Advanced vapour sensing materials: existing and latent to acoustic wave sensors for VOCs detection as the potential exhaled breath biomarkers for lung cancer1062
7Application of Taguchi signal to noise ratio design method to ZnO thin film CMOS SAW resonators1057
8Performance analysis of SAW gas sensor based on ST-Cut quartz for breath analysis1040
9Investigation of acoustic wavelength effects on silicon compatible Al doped ZnO SAW resonator1025
10Investigation on the mass sensitivity of quartz crystal microbalance gas sensor using finite element simulation1012
11Performance Analysis of VOCs Detection using Polyisobutylene and Chitosan Overlayed on QCM Sensor1001
12Design and simulation of electroacoustic sensor for exhaled breath analysis985
13Design and simulation of film bulk acoustic wave resonator (FBAR) gas sensor based on ZnO thin film974
14Study of multichannel QCM prospects in VOC detection942
15Gm/ID approach for low power sustaining amplifier circuit for GHz range MEMS SAW oscillator887
16An investigation of the sensitivity of polymer-coated surface acoustic wave-based gas sensors in the detection of volatile organic compounds827
17Chitosan coating on quartz crystal microbalance gas sensor for isopropyl alcohol and acetone detection781
18Study of adsorption isotherms in the detection of acetone and isopropyl alcohol using QCM sensor with chitosan sensing layer653
19Optimization of multi-channel quartz crystal microbalance for Gas Sensing Application602
20Characterization and fabrication of piezoelectric energy harvesting ZnO nanorod on textile by hydrothermal method578
21Enhancement of quality factor in ST-cut quartz surface acoustic wave devices by using different numbers of IDTs and wavelengths for gas sensing568
22Chitosan as natural binder for eco-friendly printable conductive ink555
23Recent advance in using eco-friendly carbon-based conductive ink for printed strain sensor: a review543
24Finite element simulation of single Zinc Oxide nanorod for piezoelectric nanogenerator528
25Pencil graphite on paper: facile approach for fabrication of flexible strain sensors520
26Macro-bending effect of single-mode fiber for glucose sensor517
27Performance evaluation of Laser-Induced Screen Printed Electrodes for electrochemical detection510
28Optimization of hydrothermally grown ZnO nanorods on flexible fabric using finite element simulation and single precursor for wearable nanogenerator418
29Development of signal conditioning circuit for piezoelectric energy harvester403
30Design and analysis of vibration-based piezoelectric energy harvester380