IIUM Repository

Dr. Tanveer Saleh CEng MIMechE

Mechatronics

KULLIYYAH OF ENGINEERING

Profile Picture

Latest Additions

  1. Saleh, Tanveer (2024) Laser beam micromachining its challenges and opportunities. In: Comprehensive Materials Processing. Second Edition. Advanced Machining Technologies, 10 . Elsevier, pp. 362-372. ISBN 978-0-323-96020-5
  2. Wan Azhar, Wan Ahmad and Saleh, Tanveer (2024) Conceptualization of a hybrid machine combining Laser Beam Micro Machining (LBMM) and Micro Electrical Discharge Machining (Micro-EDM) in a single setup. In: 9th International Conference on Mechatronics Engineering (ICOM’24), KOE,IIUM.
  3. Hasan, Mohammad Mainul and Saleh, Tanveer and Sophian, Ali (2024) Modelling of Machining Time and its Uncertainty in Micro Electrical Discharge Machining Process Using RSM. In: 9th International Conference on Mechatronics Engineering (ICOM’24), 13-14 August 2024, KOE,IIUM.
  4. Sharma, Sanjay and Gupta, Vijay Kumar and Rahman, Mustafizur and Saleh, Tanveer (2024) Real‑time chatter detection during turning operation using wavelet scattering network. The International Journal of Advanced Manufacturing Technology, 133. pp. 3699-3713. ISSN 0268-3768 E-ISSN 1433-3015
  5. Hasan, Mohammed Nazibul and Muthalif, Asan G. A. and Saleh, Tanveer and Zhang, Zhi-Bin and Mohamed Ali, Mohamed Sultan (2024) Monolithic Carbon Nanotube Film Thermoelectric Generator. IEEE Transactions on Electron Devices, 71 (2). pp. 1179-1184. ISSN 0018-9383
  6. Abd Hamid, Fatimah Khairiah and Hasan, Mohammed Nazibul and Murty, Gantan Etika and Ahmad Asri, Muhammad Izzudin and Saleh, Tanveer and Mohamed Ali, Mohamed Sultan (2024) Resistive strain sensors based on carbon black and multi-wall carbon nanotube composites. Sensors and Actuators: A. Physical, 366. pp. 1-11. ISSN 0924-4247 E-ISSN 1873-3069
  7. Saleh, Tanveer and Noor Rashid, Mir Akmam and Wan Azhar, Wan Ahmad and Ibne Noor, Wazed (2024) Laser-microEDM based hybrid micromachining: microdrilling and micromilliling. SpringerBriefs in Applied Sciences and Technology . Springer Nature, Singapore.
  8. Razib, Mohd Asyraf and Saleh, Tanveer and Rana, Masud and Islam, Saiful and Muthalif, Asan G. A. (2023) Surface roughness modelling of the micromechanically patterned CNT forests. Micro and Nanosystems, 15 (3). pp. 189-198. ISSN 1876-4029 E-ISSN 1876-4037
  9. Hasan, Mohammad Mainul and Saleh, Tanveer and Sophian, Ali and Rahman, M. Azizur and Huang, Tao and Mohamed Ali, Mohamed Sultan (2023) Experimental modeling techniques in electrical discharge machining (EDM): a review. International Journal of Advanced Manufacturing Technology, 127 (5-6). pp. 2125-2150. ISSN 0268-3768 E-ISSN 1433-3015
  10. Saleh, Tanveer and Abdulrahman, Dakhel and Banawair, Mohammed and Irfan Fikhri bin, Iszahar (2023) Implementation of IR 4.0 and IIoT in various research and TnL activities at IIUM. In: International Conference ICIRIE-2023, Kolkata, India. (Unpublished)
  11. Rahman, M Azizur and Saleh, Tanveer and Jahan, Muhammad Pervej and McGarry, Conor and Chaudhari, Akshay and Huang, Rui and Tauhiduzzaman, M and Ahmed, Afzal and Mahmud, Abdullah Al and Bhuiyan, Md. Shahnewaz and Khan, Md Faysal and Alam, Md. Shafiul and Shakur, Md Shihab (2023) Review of intelligence for additive and subtractive manufacturing: current status and future prospects. Micromachines, 14 (3). pp. 1-53. E-ISSN 2072-666X
  12. Ghnem, Abdulrahman and Saleh, Tanveer (2022) Three DoF articulated robotic manipulator for teaching and learning. In: 8th International Conference on Mechatronics Engineering (ICOM 2022), 9-10 August, IIUM Gombak, Kuala Lumpur.
  13. Iszahar, Irfan Fikhri and Saleh, Tanveer (2022) Gesture based control for Mitsubishi Industrial Robots. In: 8th International Conference on Mechatronics Engineering (ICOM 2022), 9-10 August 2022, IIUM, Gombak, Kuala Lumpur.
  14. Hasan, Mohammed Nazibul and Asri, Muhammad Izzudin Ahmad and Saleh, Tanveer and Muthalif, Asan G. A. and Ali, Mohamed Sultan Mohamed (2022) Wearable thermoelectric generator with vertically aligned PEDOT:PSS and carbon nanotubes thermoelements for energy harvesting. International Journal of Energy Research. ISSN 0363907X (In Press)
  15. Daud, Noor Dzulaikha and Hasan, Md. Nazibul and Saleh, Tanveer and Leow, Pei Ling and Ali, Mohamed Sultan Mohamed (2022) Non‑traditional machining techniques for silicon wafers. The International Journal of Advanced Manufacturing Technology, 2022 (121). pp. 29-57.
  16. Wan Azhar, Wan Ahmad and Saleh, Tanveer and Razib, Mohd Asyraf (2022) Application of CANFIS for modelling and predicting multiple output performances for different materials in μEDM. CIRP Journal of Manufacturing Science and Technology, 37. pp. 528-546. ISSN 1755-5817 (In Press)
  17. Noor, Wazed Ibne and Saleh, Tanveer (2021) Electrochemical machining for microfabrication. In: Micro Electro-Fabrication. Elsevier, pp. 339-386. ISBN 9780128200490
  18. Mollik, Md Shohag and Saleh, Tanveer and Nor, Khairul A.M. and Mohamed Ali, Mohamed Sultan (2021) A machine learning-based classification model to identify the effectiveness of vibration for µEDM. Alexandria Engineering Journal. pp. 1-11. ISSN 1110-0168 E-ISSN 2090-2670 (In Press)
  19. Noor, Wazed Ibne and Saleh, Tanveer and Rashid, Mir Akmam Noor and Ibrahim, Azhar Mohd (2021) Effect of process parameters on the laser microdrilling performance of stainless steel, aluminium and copper. In: 5th International Conference on Mechanical, Automotive and Aerospace Engineering 2021 (ICMAAE’21), IIUM. (In Press)
  20. Wan Azhar, Wan Ahmad and Saleh, Tanveer and Razib, Mohd Asyraf (2021) Development of micro-EDM machine with process parameter control for EDM drilling. In: 5th International Conference on Mechanical, Automotive and Aerospace Engineering 2021 (ICMAAE’21), IIUM. (In Press)

Most Viewed Items

Item titleViews
1ELID grinding and EDM for finish machining1094
2Combination of fused deposition modelling with abrasive milling for attaining higher dimensional accuracy and better surface finish919
3Towards achieving nanofinish on silicon (Si) wafer by μ-wire electro-discharge machining910
4Experimental study on improving μ- WEDM and μ-EDM of doped silicon by temporary metallic coating903
5Enhancement of reflectance of densified vertically aligned carbon nanotube forests890
6Efficient dressing of the wheel in ELID grinding by controllable voltage with force feed back887
7Design and development of a hybrid machine combining rapid prototyping and CNC milling operation878
8Optical characterization of tip bended vertically aligned carbon nanotubes array854
9An improved machining process of polished silicon using nano powder mixed micro-wire electro discharge machining853
10A hybrid machining process combining micro-EDM and laser beam machining of nickel-titanium based shape memory alloy853
11A multiprocess machine tool for compound micromachining851
12An ex-situ method to convert vertically aligned carbon nanotubes array to horizontally aligned carbon nanotubes mat824
13Empirical modeling of micromechanical bending process of vertically aligned carbon nanotube forest using response surface methodology817
14Development of an on-machine profile measurement system in ELID grinding for machining aspheric surface with software compensation813
15High-power MEMS switch enabled by carbon-nanotube contact and shape-memory-alloy actuator812
16Optical anisotropy in micromechanically rolled carbon nanotube forest798
17Investigation of anisotropic reflectance from densified arrays of vertically aligned carbon nanotube forests (VACNTs)797
18Study on micro-patterning process of vertically aligned carbon nanotubes (VACNTs)795
19Hexapod robot for autonomous machining792
20Micropatterning polypyrrole conducting polymer by pulsed electrical discharge791
21Micro-Mechanical Bending (M2 B) method for Carbon Nanotube (CNT) based sensor fabrication 788
22Prototype of single degree of freedom optical resolver786
23Concept of a programmable fixture for 3-Axis CNC782
24Application of VACNTs in MEMS devices782
25Remote interior temperature control of parked vehicles771
26Improving μ-wire electro-discharge machining operation of polished silicon wafer by conductive coating769
27Near net shape machining by Micro-EDM and Micro-WEDM766
28In-process truing for ELID (Electrolytic In-Process Dressing) grinding by pulsewidth control764
29µ-Patterning of Carbon Nanotube patterning of Carbon Nanotube (CNT) forest for MEMS applications 763
30An assistive robotic hand based on human computer interface (HCI) and shape memory alloy (SMA) actuator762