IIUM Repository

Prof. Dr. Ahsan Ali Khan

KULLIYYAH OF ENGINEERING

Profile Picture

Latest Additions

  1. Alrashidi, Abdullah E. M. F. and Al Hazza, Muataz Hazza Faizi and Khan, Ahsan Ali (2018) The scenario of supply chain management in Kuwait food industry. International Journal of Engineering Materials and Manufacture, 3 (3). pp. 162-170. ISSN 0128-1852
  2. Khan, Ahsan Ali and Mohiuddin, A. K. M. and Al Hazza, Muataz Hazza Faizi and Norhamzan, Norainnatul Husna (2018) Enhancement of machining performance during electrical discharge machining of stainless steel with carbon nanotube powder added dielectric fluid. International Journal of Applied Engineering Research, 13 (9). pp. 7076-7080. ISSN 0973-4562 E-ISSN 0973-9769
  3. Arifutzzaman, A. K. H. A. Ma and Ismail, Ahmad Faris and Yaacob, Iskandar Idris and Khan, Ahsan Ali and Alam, Md. Zahangir (2018) Experimental investigation and effective medium approximation of thermal conductivity of water based exfoliated Graphene nanofluids. International Journal of Applied Engineering Research, 13 (10). pp. 7477-7487. ISSN 0973-4562
  4. Rahat, Arifutzzaman and Ismail, Ahmad Faris and Yaacob, Iskandar Idris and Khan, Ahsan Ali and Mohammad, Zahangir Alam (2018) Effect of exfoliated graphene defects on thermal conductivity of water based graphene nanofluids. International Journal of Applied Engineering Research, 13 (7). pp. 4871-4877. ISSN 0973-4562 E-ISSN 0973-9769
  5. Ndaliman, Mohammed Baba and Khan, Ahsan Ali and Lafia-Araga, Ruth Anayimi (2017) Electro-discharge machining of Ti-6AI-4V alloy using Cu-TaC compact electrode with urea dielectric: Reactions and their effects on the machined surface. In: 2017 8th International Conference on Mechanical and Intelligent Manufacturing Technologies (ICMIMT), 3rd February-6th February 2017, Cape Town, South Africa.
  6. Abdulkareem, Sulaiman and Khan, Ahsan Ali and Konneh, Mohamed (2018) Analysis of microlayer defects of a functionally graded titanium alloy by electrical discharge machining. Engineering and Applied Science Research, 45 (1). pp. 17-22. ISSN 2539-6161 E-ISSN 2539-6218
  7. Abdulkareem, Suleiman and Khan, Ahsan Ali and Shah, Qasim Hussain and Konneh, Mohamed (2017) Temperature distribution in copper electrode during electrical discharge machining process. International Journal of Integrated Engineering, 9 (1). pp. 39-43. ISSN 2229-838X
  8. Al Hazza, Muataz Hazza Faizi and Ibrahim, Nur Asmawiyah and Adesta, Erry Yulian Triblas and Khan, Ahsan Ali and Abdullah Sidek, 'Atiah (2017) Flank wear analysing of high speed end milling for hardened steel D2 using Taguchi method. IOP Conference Series: Materials Science and Engineering, 184. pp. 1-5. ISSN 1757-899X
  9. Al Hazza, Muataz Hazza Faizi and Ibrahim, Nur Asmawiyah and Adesta, Erry Yulian Triblas and Khan, Ahsan Ali and Abdullah Sidek, 'Atiah (2017) Surface roughness optimization using Taguchi method of high speed end milling for hardened steel D2. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25th-27th July 2016, Kuala Lumpur, Malaysia.
  10. Khan, Ahsan Ali and Abu Bakar, Marina and Al Hazza, Muataz Hazza Faizi and Che Daud, Mohd Radzi and Mohiuddin, A. K. M. (2017) Improving machining performance using alumina powder-added dielectric during electrical discharge machining (EDM). In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25th-27th July 2016, Kuala Lumpur, Malaysia.
  11. Khan, Ahsan Ali and Al Hazza, Muataz Hazza Faizi and Adesta, Erry Yulian Triblas and Mohd. Fauzey, Nur Fadhilah (2016) Modeling the effect of CNT concentration in dielectric fluid on EDM performance using neural network. In: 2015 4th International Conference on Advanced Computer Science Applications and Technologies (ACSAT 2015), 8th-10th Dec. 2015, Kuala Lumpur.
  12. Mohammed , Baba Ndaliman and Bala, Katsina Christopher and Khan, Ahsan Ali and Mohammad , Yeakub Ali and Abdullahi, Umma and Abdulmumin , Adebisi Adetayo (2015) The effects of sliding parameters on dry wear characteristics of Ti-6Al-4V alloy. Advanced Materials Research, 1115. pp. 213-216. ISSN 1022-6680
  13. Khan, Ahsan Ali and Mohammed, Baba Ndaliman and Mohamad, Ummu Atiqah Khairiyah and Sulong, Nurul Farhana and Mohd Zain, Zakaria (2015) Surface quality produced in EDM with tungsten carbide and copper compacted electrodes. Advanced Materials Research, 1115. pp. 24-28. ISSN 1662-8985
  14. Khan, Ahsan Ali and Wahid Azmi, Nurfarah and Odenan, Mohd Azim and Mohd Zain, Zakaria (2015) Effect of powder concentration on EDM performance during machining mild steel. Advanced Materials Research, 1115. pp. 7-11. ISSN 1662-8985
  15. Al Hazza, Muataz Hazza Faizi and Mohammed, Baba Ndaliman and Mohammad, Yeakub Ali and Khan, Ahsan Ali (2015) Analyzing the influence of electrical parameters on EDM process of Ti6Al4V alloy using Adaptive Neuro-fuzzy Inference System (ANFIS). International Review of Mechanical Engineering, 9 (3). pp. 237-241. ISSN 1970-8734
  16. Mohd Zain, Zakaria and Ndaliman, Mohammed Baba and Khan, Ahsan Ali and Ali, Mohammad Yeakub (2014) Improving micro-hardness of stainless steel through powder-mixed electrical discharge machining. Journal of Mechanical Engineering Science. pp. 1-7. ISSN 0954-4062
  17. Khan, Ahsan Ali and Ndaliman, Mohammed Baba and Mohammad , Yeakub Ali and Lawal, Sunday Albert and Sulong, Nurul Farhana and Mohamad, Ummu Atiqah Khairiyah (2013) Effect of electrical parameters on performance of Cu-TiC mixed ceramic compact electrode in EDM process. In: 2nd International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2013), 2-4 July 2013, Kuala Lumpur, Malaysia.
  18. Ndaliman, Mohammed Baba and Khan, Ahsan Ali and Mohammad , Yeakub Ali and M A, Mohammad Hambiyah (2013) Modelling the surface roughness behaviour of an EDMed workpiece with different tool electrodes using DoE. In: 5th International Conference on Mechatronics (ICOM'13), 2 – 4 July 2013, Kuala Lumpur, Malaysia.
  19. Khan, Ahsan Ali and Ndaliman, Mohammed Baba and Mohammad , Yeakub Ali and Al-Falahi, Muath D. and Ibrahim, Haazin A. and Mustapa, Mohad S. (2013) The Effect of EDM with external magnetic field on surface roughness of stainless steel. In: 2nd International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2013), 2-4 July 2013, Kuala Lumpur, Malaysia.
  20. Mohammed Baba, Ndaliman and Khan, Ahsan Ali and Mohammad , Yeakub Ali and M A, Mohammad Hambiyah (2013) Modelling the surface roughness behaviour of an EDMed workpiece with different tool electrodes using DoE. IOP Conference Series: Materials Science and Engineering, 53. pp. 1-8. ISSN 1757-8981

Most Viewed Items

Item titleViews
1Effect of exfoliated graphene defects on thermal conductivity of water based graphene nanofluids527
2Experimental investigation and effective medium approximation of thermal conductivity of water based exfoliated Graphene nanofluids507
3Design and development of Acrylic Die for producing wax pattern to gabricate hip bone joint471
4Effect of machining parameters on surface roughness during wet and dry Wire-EDM of stainless steel459
5Surface roughness optimization using Taguchi method of high speed end milling for hardened steel D2455
6Study on the microstructure and properties of Fe-C-Si and Fe-C-Al Cast irons446
7Cooling effect on electrode and process parameters in EDM443
8Role of heat transfer on process characteristics during electrical discharge machining443
9Optimization of process parameters on EDM milling of stainless steel AISI 304440
10Influence of electrode cooling on recast layers and micro crack in EDM of titanium439
11Influence of process parameters on electrical discharge machined job surface integrity428
12Prediction of minimum chip thickness in tool based micro end milling420
13Study of material removal rate and electrode wear ratio for micro electrical discharge milling of AISI 420 and Stavax ESR418
14Electro-discharge machining of SUS 304 stainless steel with TaC powder-mixed dielectric418
15Wear ratio and work surface finish during electrical discharge machining (EDM) with eccentric electrode411
16Effect of abrasive water jet machining parameters on aramid fibre reinforced plastics composite409
17Surface quality produced in EDM with tungsten carbide and copper compacted electrodes409
18Improving machining performance using alumina powder-added dielectric during electrical discharge machining (EDM)408
19Reducing electrode wear ratio using cryogenic cooling during electrical discharge machining407
20Influence of electrode cooling on material migration among the electrodes during EDM of titanium alloy 404
21Influence of TaC Powder Additive on electrical discharge machining of stainless Steel401
22Relationship between machining variables and process characteristics during wire EDM399
23A new approach of applying cryogenic coolant in turning AISI 304 stainless steel399
24Surface Modification using Electric Discharge Machining (EDM) with powder addition398
25Determination of influential factors on EDMed surface properties using Plackett-Burman design397
26Investigation on structure and properties of brass casting395
27Experimental investigation of machining parameters on surface roughness in dry and wet wire-electrical discharge machining391
28Analysis of microlayer defects of a functionally graded titanium alloy by electrical discharge machining390
29Tool wear rate during electrical discharge machining (EDM) with eccentric electrode390
30Effect of powder concentration on EDM performance during machining mild steel389