IIUM Repository

Norhazwanie Jatin (PT)

GOMBAK

LIBRARY

Profile Picture

Latest Additions

  1. Shuriye, Abdi Omar and Kabbashi, Nassereldeen Ahmed (2011) Early Muslim contributions to astronomy. In: Islamization, Ethics and Values in Science and Technology. IIUM Press, International Islamic University Malaysia, pp. 78-91. ISBN 9789670225821
  2. Muyibi, Suleyman Aremu and Mohd. Salleh, Hamzah (2011) Ethical issues in environmental management and resource conservation from Islamic perspective. In: Islamization, Ethics and Values in Science and Technology. IIUM Press, International Islamic University Malaysia, pp. 16-26. ISBN 9789670225821
  3. Abdul Karim, Mohamed Ismail (2011) Indicator microorganisms : detection of Coliform and Escherichia Coli. In: Experimental Methods in Modern Biotechnology. IIUM Press, International Islamic University Malaysia, pp. 176-189. ISBN 9789670225869
  4. Ahmad Raus, Raha (2011) Screening natural compounds for antibacterial activity by disc diffusion method. In: Experimental Methods in Modern Biotechnology. IIUM Press, International Islamic University Malaysia, pp. 170-175. ISBN 9789670225869
  5. Al Hazza, Muataz Hazza Faizi and Adesta, Erry Yulian Triblas (2011) Development of new model for cutting force in high speed hard turning. In: High Speed Cutting: An Approach towards Improved Machining Performance. IIUM Press, Kuala Lumpur, pp. 145-152. ISBN 9789674180232
  6. Al Hazza, Muataz Hazza Faizi and Adesta, Erry Yulian Triblas (2011) Development of tooling cost model in high speed hard turning. In: High Speed Cutting: An Approach towards Improved Machining Performance. IIUM Press, Kuala Lumpur, pp. 125-144. ISBN 9789674180232
  7. -, Suryanto (2011) Coating for high speed cutting tools. In: High Speed Cutting: An Approach towards Improved Machining Performance. IIUM Press, Kuala Lumpur, pp. 103-124. ISBN 9789674180232
  8. Al Hazza, Muataz Hazza Faizi and Adesta, Erry Yulian Triblas (2011) Experimental investigations in high-speed hard turning of AISI 4340 steel using mixed ceramic. In: High Speed Cutting: An Approach towards Improved Machining Performance. IIUM Press, International Islamic University Malaysia, pp. 93-100. ISBN 9789674180232
  9. Mohd Ali, Afifah and Adesta, Erry Yulian Triblas (2011) Influence of backcutting phenomena to surface roughness of hardened AISI H13 during high speed end milling process. In: High Speed Cutting: An Approach towards Improved Machining Performance. IIUM Press, Kuala Lumpur, pp. 81-92. ISBN 9789674180232
  10. Sutjipto, Agus Geter Edy and Kaderi, Akbar (2011) Sample preparation on ceramics composite for cutting tools in high speed machining. In: High Speed Cutting: An Approach towards Improved Machining Performance. IIUM Press, Kuala Lumpur, pp. 61-79. ISBN 9789674180232
  11. Al Hazza, Muataz Hazza Faizi and Adesta, Erry Yulian Triblas (2011) Development of empirical models for surface roughness during high speed turning for hard materials using Box-Behnken design. In: High Speed Cutting: An Approach towards Improved Machining Performance. IIUM Press, Kuala Lumpur, pp. 31-38. ISBN 9789674180232
  12. Salami, Momoh Jimoh Emiyoka and Abdul Muthalif, Asan Gani and Pervez, T. (2011) Machine condition monitoring and fault diagnosis using spectral analysis techniques. In: Mechatronics book series - selected papers from ICOM'01, ICOM'05 and ICOM'08. IIUM Press, Kuala Lumpur, pp. 509-519. ISBN 9789670225685
  13. Ayyad, Assma O.H. and Khalifa, Othman Omran and Mohd. Ali, M.A. (2011) An isolated character segmentation approach. In: Mechatronics book series: Selected papers from ICOM'01, ICOM'05 and ICOM'08. IIUM Press, Kuala Lumpur, pp. 283-287. ISBN 9789670225685
  14. Khalifa, Othman Omran and Habib Harding, Sering and Hassan Abdalla Hashim, Aisha (2011) Lossless audio compression using Psychoacoustic Model and Wavelet transform. In: Mechatronics book series: Selected papers from ICOM'01, ICOM'05 and ICOM'08. IIUM Press, Kuala Lumpur, pp. 274-282. ISBN 9789670225685
  15. Iwan S., Mahmud and Wijaya, Andika Aji and Martono, Wahyudi (2011) State feedback control tuning for flexible joint manipulator using PSO with constraint. In: Mechatronics book series – selected papers from ICOM’01, ICOM’05 and ICOM’08. IIUM Press, Kuala Lumpur, pp. 215-222. ISBN 9789670225685
  16. Martono, Wahyudi and Jalani, Jamal (2011) Design and implementation of fuzzy logic controller for intelligent gantry crane system. In: Mechatronics book series – selected papers from ICOM’01, ICOM’05 and ICOM’08. IIUM Press, Kuala Lumpur, pp. 173-179. ISBN 9789670225685
  17. Abdul Rashid, Khairuddin and Preece, Christopher Nigel and Hasan, Sharina Farihah, eds. (2011) International readings in construction business & marketing. IIUM Press, International Islamic University Malaysia. ISBN 9789670225524
  18. Abu Bakar, Aniza and Tukiman, Izawati and Ibrahim, Putri Haryati, eds. (2011) Graphic book: rendering and colouring. IIUM Press, International Islamic University Malaysia, International Islamic University Malaysia. ISBN 978-967-0225-53-1
  19. Syed Khuzzan Alhabshi, Sharifah Mazlina (2011) Personalised learning environments: development issues and barriers. In: Research in Quantity Surveying. IIUM Press, International Islamic University Malaysia, pp. 182-197. ISBN 9789674182038
  20. Osman, Julian and Abdul Aziz, Noraziela (2011) Life cycle costing: value-added service of quantity surveyors. In: Research in Quantity Surveying. IIUM Press, International Islamic University Malaysia, pp. 170-181. ISBN 9789674182038

Most Viewed Items

Item titleViews
1The evolution of planning law in Malaysia1292
2The growth rate and viability of DF1 cell in different culture media 1283
3Design of an autopilot for an autonomous unmanned aerial vehicle1191
4Design and development of an automatic car door opening and locking system1172
5Newcastle Disease virus propagation in stirred tank bioreactor: part I 1136
6Lossless audio compression using Psychoacoustic Model and Wavelet transform 1113
7Growth kinetic study of Rhizopus oryzae via fermentation of lactic acid from kenaf biomass1093
8Development of tooling cost model in high speed hard turning1052
9An isolated character segmentation approach 1042
10Early Muslim contributions to astronomy1021
11Influence of backcutting phenomena to surface roughness of hardened AISI H13 during high speed end milling process1014
12Development of unmanned vehicle utilizing GPS system1005
13Finite element study of composite cones under axial compression loading1001
14Description of items in the bills of quantities (B/Qs) technique revisit985
15Design and implementation of fuzzy logic controller for intelligent gantry crane system983
16Development of new model for cutting force in high speed hard turning982
17Coating for high speed cutting tools980
18Locally processed serum performance in vero cell culture: Part II 978
19The planning appeal cases by developer from year 1992-2005: a case study of Penang Board977
20Sample preparation on ceramics composite for cutting tools in high speed machining963
21Life cycle costing: value-added service of quantity surveyors949
22State feedback control tuning for flexible joint manipulator using PSO with constraint935
23Experimental investigations in high-speed hard turning of AISI 4340 steel using mixed ceramic935
24Indicator microorganisms : detection of Coliform and Escherichia Coli926
25Accessible building design: transportation buildings - case studies of LRT station of Bandar Tasik Selatan, Ferry Jetty of Penang, and Ferry Jetty of Pangkor Island925
26Provision of barrier-free environment at waterfront development in Malaysia920
27Machine condition monitoring and fault diagnosis using spectral analysis techniques913
28Screening natural compounds for antibacterial activity by disc diffusion method901
29Malaysian standards, other regulations for people with disabilities, and the future direction890
30Values of river towards sustainable urban landscape development881