IIUM Repository

In-socket sensory system for transfemoral amputees using piezoelectric sensors: An efficacy study

Jasni, Farahiyah and Hamzaid, Nur Azah and Asan Gani, Abdul Muthalif and zakaria, Zafirah and Shasmin, Hanie Nadia and Cheok, Ng Siew (2016) In-socket sensory system for transfemoral amputees using piezoelectric sensors: An efficacy study. IEEE/ASME Transactions on Mechatronics, 21 (5). pp. 2466-2467. ISSN 1083-4435 E-ISSN 1941-014X

[img] PDF - Published Version
Restricted to Repository staff only

Download (1MB) | Request a copy
[img] PDF (SCOPUS) - Published Version
Restricted to Repository staff only

Download (148kB) | Request a copy
[img] PDF (WOS) - Published Version
Restricted to Repository staff only

Download (189kB) | Request a copy

Abstract

This paper presents the design and evaluation of an in-socket sensory system for a transfemoral prosthetic leg using a set of piezoelectric sensors. The design process includes identifying the optimal mounting configuration of the sensors and determining their best placement. Two experiments were performed separately to address each objective. Results of the experiment suggested that cushionall with fit size cantilever with elastic foundation should be adopted to mount the sensors on the socket’s wall. As for the placement of the sensors, the result suggested that the sensors should be positioned in zig-zag orientation from top to bottom, which can cover all of the most active area on the quadriceps and hamstring muscle groups. With the identified design, the socket was fabricated and instrumented for a transfemoral amputee and the performance of the in-socket sensory system was evaluated. The amputee performed level walking at normal speed on a 5-m straight pathway multiple times while the output voltage signal from each sensor was recorded. The output signals consistency was assessed by calculating the cross correlation, r, within five trials. In order to measure the strength of the correlation matrix of each sensor, the Frobenius norm, ||A||F was calculated. The high norm value for all sensors pattern (||A||F >4.5) for quadriceps implies that the mounting and placement of the sensors is most suitable for a consistent and reliable signal. For Hamstring, results inferred that except for the two sensors located on the top most position and the most bottom sensor, the other sensors showed good performance (||A||F >4.4). Thus, the proposed design of the in-socket sensory system using piezo sensors was proven to be effective for a transfemoral prosthetic leg.

Item Type: Article (Journal)
Additional Information: 3352/53928
Uncontrolled Keywords: Active-knee prosthetic leg, biomechanics, piezoelectric, sensor, transfemoral (TF)
Subjects: T Technology > TJ Mechanical engineering and machinery
Kulliyyahs/Centres/Divisions/Institutes (Can select more than one option. Press CONTROL button): Kulliyyah of Engineering > Department of Mechatronics Engineering
Depositing User: Ir. Ts. Dr Asan Gani Abdul Muthalif
Date Deposited: 10 Jan 2017 11:10
Last Modified: 18 Jul 2017 08:45
URI: http://irep.iium.edu.my/id/eprint/53928

Actions (login required)

View Item View Item

Downloads

Downloads per month over past year