Mel, Maizirwan and Abdul Rahman, Abdul Rafiz and Mohamed Salleh, Mohamad Ramlan and Hashim, Yumi Zuhanis Has-Yun (2008) Monoclonal antibody production: viability improvement of RC1 hybridoma cell in different types of bioreactor. World Journal Microbiology Biotechnology , 24 (9). pp. 1923-1927. ISSN 1923-1927
PDF (Monoclonal antibody production: viability improvement of RC1 hybridma cell in different types of bioreactor)
Restricted to Repository staff only Download (336kB) | Request a copy |
Abstract
The study was done to improve the viability of the RC1 hybridoma cell in order to produce more amount of monoclonal antibody (mAb). By using the optimized media, the cell had been cultured in two bioreactor systems which were the MiniPerm and Stirred Tank bioreactor (ST bioreactor), and the results were compared to the one obtained by using the T-Flask bioreactor which was used as a standard. The results showed that the ST bioreactor was able to improve the viability of the cell to the value of 91.8% which was a little bit better than the one obtained by the MiniPerm bioreactor (88.6%) and far better than that of achieved by the T-Flask bioreactor (76.4%). This was well correlated with the good growth performance of the cell in the ST bioreactor with the specific growth rate (l) value of 0.0289 h-1 followed by MiniPerm bioreactor with the value of 0.0243 h-1 and then the T-Flask with the value of 0.0151 h-1. The low value of doubling time (td) obtained in the ST bioreactor (24 h) compared to the one obtained in the MiniPerm (29 h) and T-Flask bioreactor (46 h) had also contributed to the higher value of cell viability. As a result a higher concentration of mAb was able to be produced by the ST bioreactor (0.42 g l-1) compared to that of the MiniPerm (0.37 g l-1) and T-Flask bioreactor (0.23 g l-1).
Item Type: | Article (Journal) |
---|---|
Additional Information: | 4085/5475 |
Uncontrolled Keywords: | mAb, Hybridoma, cell culture, miniPerm bioreactor, � ST bioreactor |
Subjects: | T Technology > TP Chemical technology > TP155 Chemical engineering T Technology > TP Chemical technology > TP248.13 Biotechnology |
Kulliyyahs/Centres/Divisions/Institutes (Can select more than one option. Press CONTROL button): | Kulliyyah of Engineering > Department of Biotechnology Engineering |
Depositing User: | Dr Maizirwan Mel |
Date Deposited: | 18 Nov 2011 08:48 |
Last Modified: | 09 Dec 2011 10:06 |
URI: | http://irep.iium.edu.my/id/eprint/5475 |
Actions (login required)
View Item |