IIUM Repository

Prof. Dr. A K M Mohiuddin

KULLIYYAH OF ENGINEERING

Profile Picture

Latest Additions

  1. Alazemi, Mohammad KhTh E and Mohiuddin, A. K. M. and Al-Juboori, Salloom A. (2019) Conflict management of construction projects – a case study Kuwait International Airport Cargo City. International Journal of Mechanical Engineering (IJME), 8 (3). pp. 45-54. ISSN 2319-2240 E-ISSN 2319-2259
  2. Mohammed Kh Th E, Aalazemi and Mohiuddin, A. K. M. (2019) Construction project in Kuwait international airport cargo city: issue of conflict management. International Journal of Engineering Materials and Manufacture, 4 (2). pp. 59-65. E-ISSN 1757-899X
  3. Alazemi, Mohammad KhTh E and Mohiuddin, A. K. M. (2019) Conflicts and delays in mega construction projects – Kuwait International Airport Cargo City. International Journal of Engineering and Advanced Technology (IJEAT), 8 (3S). pp. 927-939. ISSN 2249 - 8958
  4. Revichandran, Rajeanderan and Mohiuddin, A. K. M. and Uddin, Mohammad Faisal (2019) Experimental investigation of straight shape thermosyphon filled with R410A refrigerant. International Journal of Engineering and Advanced Technology (IJEAT), 8 (2S2). pp. 271-278. ISSN 2088-5334 E-ISSN 2460-6952
  5. Revichandran, Rajeanderan and Mohiuddin, A. K. M. and Uddin, Mohammad Faisal (2019) Factors affecting thermosyphon performance- A review of studies. International Journal of Rescent Technology and Engineering (IJRTE), 7 (6S). pp. 124-133. ISSN 2277-3878
  6. Rahman, Mohammed Ataur and Mohiuddin, A. K. M. and Md Daud, Badrul (2019) Electromagnetic contactless torque transducer: torque measurement and shaft impediment approach. International Journal of Recent Technology and Engineering (IJRTE), 7 (6S). pp. 298-303. ISSN 2277-3878
  7. Rahman, Mohammed Ataur and Hassan, Nurul and Jaffar, Abdul Hassan and Mohiuddin, A. K. M. and Ihsan, Sany Izan (2019) Study on the development of electromagnetic two speed gearbox for EV. International Journal of Rescent Technology and Engineering (IJRTE), 7 (6S). pp. 147-152. ISSN 2277-3878 E-ISSN 2249-8958
  8. Mohiuddin, A. K. M. and Osman, Amirah and Uddin, Mohammad Faisal (2019) Development and investigation of a cooling system for a parked vehicle using solar energy. International Journal of Recent Technology and Engineering (IJRTE), 7 (6S). pp. 87-92. ISSN 2277-3878 E-ISSN 2249-8958
  9. Ali, Said and Islam, Mazharul and Mohiuddin, A. K. M. and Idres, Moumen (2019) Performance analysis of a small capacity horizontal axis wind turbine using QBlade. International Journal of Recent Technology and Engineering (IJRTE), 7 (6S). pp. 153-157. ISSN 2277-3878 E-ISSN 2249-8958
  10. Ihsan, Sany Izan and Mohiuddin, A. K. M. and Syed Abu Bakar, Syed Noh and Rosili, Sarah Shamila (2019) Experimental study on low temperature power generator. In: 4th International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2018), 19th-20th September 2018, Kuala Lumpur, Malaysia.
  11. Revichandran, Rajeanderan and Mohiuddin, A. K. M. (2019) Two-phase thermosyphon filled with R410A refrigerant operating at low evaporator temperature. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 54 (1). pp. 9-20. ISSN 2289-7879
  12. Mohiuddin, A. K. M. and Syafie, Ahmad and Khan, Ahsan Ali (2018) Design and analysis of fuel cell stack for automotive use. International Review of Mechanical Engineering (IREME), 12 (6). pp. 540-547. ISSN 1970-8734 E-ISSN 2532-5655
  13. Khan, Ahsan Ali and Muataz Hazza Faizi, Muataz and Mohiuddin, A. K. M. and Abdul Fattah, Nurfatihah and Che Daud, Mohd Radzi (2018) Performance of electrical discharge machining (EDM) with nickel added dielectric fluid. IIUM Engineering Journal, 19 (1). pp. 215-222. ISSN 1511-788X E-ISSN 2289-7860
  14. Khan, Ahsan Ali and Mohiuddin, A. K. M. and Norhamzan, Norainnatul Husna (2018) A comparative study on flank wear of ceramic and Tungsten carbide inserts during high speed machining of stainless steel. International Journal of Applied Engineering Research, 13 (5). pp. 2541-2544. ISSN 0973-4562 E-ISSN 0973-9769
  15. Khan, Ahsan Ali and Mohiuddin, A. K. M. and Abdul Latif, Muhammad Alif (2018) Improvement of MRR and surface roughness during electrical discharge machining (EDM) using aluminum oxide powder mixed dielectric fluid. In: ICAMME 2017: International Conference on Advances in Manufacturing and Materials Engineering 2017, 8-9 Aug 2017, Kuala Lumpur, Malaysia.
  16. Mohiuddin, A. K. M. and Basran, Norasyikin and Khan, Ahsan Ali (2018) Modelling and validation of proton exchange membrane fuel cell (PEMFC). In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8-9 Aug 2017, Kulliyyah of Engineering, IIUM, Kuala Lumpur.
  17. Khan, Ahsan Ali and Al Hazza, Muataz Hazza Faizi and Mohiuddin, A. K. M. and Ali, Mohammad Yeakub (2017) Influence of the angle of cut of workpiece on taper and corner roundness during Wire Electrical Discharge Machining (WEDM). International Review of Mechanical Engineering (IREME), 11 (3). pp. 208-212. ISSN 1970-8734 E-ISSN 2532-5655
  18. Rahman, Mohammed Ataur and Mohiuddin, A. K. M. and Hawlader, Mohammad Nurul Alam and Ihsan, Sany Izan (2017) Hybrid engine powered city car: fuzzy controlled approach. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25th-27th July 2016, Kuala Lumpur, Malaysia.
  19. Rahman, Mohammed Ataur and Sharif, Sazzad and Mohiuddin, A. K. M. and Ismail, Ahmad Faris and Ihsan, Sany Izan (2017) Intelligent control electromagnetic actuated continuously variable transmission system for passenger car. IOP Conf. Series: Materials Science and Engineering, 184. ISSN 1757-8981 E-ISSN 1757-899X
  20. Ihsan, Sany Izan and Safian, M. A. I. M. and Taufek, M. A. M. and Mohiuddin, A. K. M. (2017) Improvement design of parabolic trough. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25th-27th July 2016, Kuala Lumpur, Malaysia.

Most Viewed Items

Item titleViews
1Probable solution of torque dip problem of CAMPRO 1.6L engine 597
2Tractive performance prediction for intelligent air-cushion track vehicle: fuzzy logic approach510
3Six sigma approach to improve the painting process: a case study of a Malaysian vehicle assembly company496
4Dynamic modeling of intelligent air-cushion tracked vehicle for swamp peat496
5Fuzzy expert system for controlling swamp terrain intelligent air-cushion tracked vehicle494
6Knowledge base for the systematic design of wet cooling towers. Part I: Selection and tower characteristics479
7Development of an intelligent air-cushion system for a swamp tracked vehicle 478
8Tractive performance of LGP-30 wheeled vehicle during straight motion on Sepang peat terrain in Malaysia470
9Hybrid electrical air-cushion tracked vehicle for swamp peat in Malaysia456
10Biodiesel production: a mini review453
11An analysis of energy use, energy intensity and emissions at the industrial sector of Malaysia452
12Investigation of low end torque dip problem of CAMPRO 1.6L engine449
13Biodiesel reactor optimization using combined CFD-Taguchi method449
14Design optimization of valve timing at various engine speeds using Multi-Objective Genetic Algorithm (MOGA) 444
15Fuzzy logic approach for prediction the lift coefficient on an aircraft model with and without winglet434
16Modeling of the developed flexible skirt air-cushion track vehicle model430
17Effectiveness of the developed instrumentation system on the vehicle tractive performance measurement428
18Load distribution for an intelligent air-cushion track vehicle based on optimal power consumption428
19Knowledge base for the systematic design of wet cooling towers. Part II: Fill and other design parameters426
20Kinematics model for the wheeled vehicle tractive performance determination on Sepang’s peat terrain in Malaysia426
21Finite element method for the study of air-cushion tracked vehicle-terrain interaction424
22Painting process improvement through six sigma approach in a Malaysian vehicle assembly company423
23Experimental study on low temperature power generator421
24Integrated mechanics of hybrid electrical air-cushion tracked vehicle for swamp peat421
25Analysis of engine performance with NGV420
26Mobility investigation of an intelligent air-cushion tracked vehicle on swamp peat terrain in Malaysia420
27Study on the development of a fuzzy logic control electromagnetic actuated CVT system417
28Waste cooking oil utilization for biodiesel production417
29Solar energy management for poverty alleviation and income generating activities414
30Waste cooking oil transesterification: influence of impeller type, temperature, speed and bottom clearance on FAME yield413