IIUM Repository

Items where Division is "Kulliyyah of Engineering" and Year is 2008

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creator/Author | Item Type | No Grouping
Jump to: A | B | G | H | I | K | M | R | S | T | W | Y
Number of items: 41.

A

Abdul Rahman, Farah Diyana and Hassan Abdalla Hashim, Aisha and Strangeways, Hal (2008) An efficient approach to mitigate scintillation effects on GPS range-finding in ionosphere. In: International Conference on Computer and Communication Engineering 2008 (ICCCE08) , 13th-15th May 2008, Kuala Lumpur.

Abdullah, Khaizuran and Neville, Katrina L. and Hussain, Zahir (2008) An interference cancellation algorithm for fourier-based and wavelet-based OFDM systems. In: International Conference on Advanced Technologies for Communications, 6-9 October, 2008, Hanoi, Vietnam.

Adesta, Erry Yulian Triblas and Riza, Muhammad and Al Hazza, Muataz Hazza Faizi and ., Rosehan (2008) The Development of Cost Structure for High Speed Hard Turning. International Journal of Science Engineering and Technology, 1 (2). pp. 47-58. ISSN 1985-3785

Ahmad, Taqiyuddi and Zainal Arifin, Muaz and Hassan Abdalla Hashim, Aisha and Anwar, Farhat and Al-Irhayim, Sufyan (2008) A comparative study of source specific multicast and aggregated source specific multicast. In: International Conference on Computer and Communication Engineering 2008 (ICCCE08) , 13-15 May 2008, Kuala Lumpur.

Alang Md Rashid, Nahrul Khair (2008) Campuran Bahan Api Lestarikan Tenaga. Dewan Ekonomi, 8 (1-2). p. 57.

Ali, Mohammad Yeakub (2008) Focused ion beam machining of cell culture dish. In: ISE Seminar 2008, 3rd March 2008, Thailand. (Unpublished)

Ali, Mohammad Yeakub and Ismail, Ahmad Faris (2008) Nanotechnology education at undergraduate level: Malaysian scenario. In: National Seminar on Science, Technology and Social Sciences (STSS), 2nd-4th June 2008, Kuantan, Pahang.

Ayyad, Assma O.H. and Khalifa, Othman Omran and Hassan Abdalla Hashim, Aisha (2008) Handwritten Arabic word recognition: A review of common approaches. In: International Conference on Computer and Communication Engineering, ICCCE'08, (13 - 15 May 2008) hosted at Kuala Lumpur Malaysia , 13-15 May 2008 , Kuala Lumpur, Malaysia.

B

Bhuiyan, Moinul and Hiranaga, Y. and Cho, Y. (2008) Formation of large area of thinning Ferroelectric single crystal for recording medium. In: The Japan Society of Applied Science (JSAP) 68th Spring Conference, 2008, Chiba, Japan.

Bhuiyan, Moinul and Yamada, Shinji and Kurokawa, Noriharu and Sakamoto, Katsuhiko and Takemasa, Eiichiro (2008) Development of low normal force contact using electro fine forming and lithography technology. In: Tyco Electronics Technical Conference 2008, 14-16 Oct 2008, Shanghai, China. (Unpublished)

G

Ginta, Turnad Lenggo and Amin, A. K. M. Nurul and Lajis, Mohd Amri and Karim, A.N. Mustafizul and Sutjipto, Agus Geter Edy (2008) Tool life assessment in End Milling Titanium Alloy (Ti-6AI-4V) using PCD inserts. International Journal of Science Engineering and Technology, 1 (1). pp. 15-21. ISSN 1985-3785

H

Habaebi, Mohamed Hadi and Abduljali, E. and Ragaibi, T. and Rhuma, N. (2008) Effect of sensor specific body location on wireless network routing performance. Electronics Letters, 44 (1). pp. 40-42. ISSN 0013-5194

Hameed, Shihab A. and Hassan Abdalla Hashim, Aisha and M. Sharifudeen, Shahina Shabnam and Meho, Vladimir and Khalifa, Othman Omran (2008) An efficient emergency, healthcare, and medical information system. International Journals of Biometric and Bioinformatics (IJBB), 2 (5). pp. 1-9. ISSN 1985-2347 (O)

Haque, Md. Mohafizul and Ismail, Ahmad Faris (2008) Effect of cooling rate on strength and fracture surfaces of alpha brass casting. In: 7th International Conference on Fracture and Strength of Solids, FEOFS 2007; Urumqi; China;, 27 -29 August 2007, Urumqi, China.

Hassan, Wan Haslina and Hassan Abdalla Hashim, Aisha and FIsal, Norsheila (2008) A tracking mechanism using agents for personal mobility in IP networks. In: 6th IEEE International Conference on Industrial Informatics , July 13-16, 2008, Daejeon, Korea.

Hassan, Wan Hazlina and Hassan Abdalla Hashim, Aisha and FIsal, Norsheila (2008) A dynamic approach for location management in IP-based networks. In: International Conference on Computer and Communication Engineering (ICCCE 2008), 13th-15th May 2008, Kuala Lumpur.

Hawlader, Mohammad Nurul Alam and Ye, Shaochun (2008) PERFORMANCE OF A SOLAR INTEGRATED HEAT PUMP AIR-CONDITIONER, WATER HEATER AND DRYER. International Journal of Ambient Energy, 29 (4). pp. 189-196. ISSN 0143-0750

I

Islam, Mazharul and Amin, M. Ruhul and Carriveau, Rupp and Fartaj, Amir (2008) Designing straight-bladed vertical axis wind turbine using the cascade theory. In: 12th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, 10th-12th September 2008, Victoria, British Columbia, Canada.

Islam, Mazharul and Amin, M. Ruhul and Ting, David and Fartaj, Amir (2008) Performance analysis of a smaller-capacity straight-bladed VAWT with prospective airfoils. In: 46th AIAA Aerospace Sciences Meeting and Exhibit, 7th-10th January 2008, Reno, Nevada, U.S.A..

K

Khalifa, Othman Omran and Harding, Sering Habib and Hassan Abdalla Hashim, Aisha (2008) Compression using Wavelet Transform. International Journal of Signal Processing, 2 (5). pp. 17-26. ISSN 1985-2339

Khan, Ahsan Ali and Ahmed, Mirghani Ishak (2008) Improving tool life using cryogenic cooling. Journal of Materials Processing Technology, 196 (1-3). pp. 149-154.

Khan, Sheroz and Abdulazeez, Salami Femi and Adetunji, Lawal Wahab and Alam, A. H. M. Zahirul and Salami, Momoh Jimoh Emiyoka and Hameed, Shihab A. and Hassan Abdalla Hashim, Aisha and Islam, Mohd Rafiqul (2008) Design and implementation of an optimal fuzzy logic controller using genetic algorithm. Journal of Computer Science, 4 (10). pp. 799-806. ISSN 1549-3636

Kok, Yew Ng and Chee, Pin Tan and Akmeliawati, Rini and Edwards, Christopher (2008) Disturbance decoupled fault reconstruction using sliding mode observers. In: 17th World Congress The International Federation of Automatic Control, 6-11th July 2008, Seoul, Korea.

M

Mahmoud, Omer and Anwar, Farhat and Salami, Momoh Jimoh Emiyoka (2008) Simulation and analysis of an admission control mechanism for MPLS DS-TE. Computer Communications, 31 (10). pp. 2178-2184. ISSN 0140-3664

Mohd Sobli, Nuurul Hudaa and Abdel-Raouf, Hany Essam Eldin (2008) Design of a compact printed band-notched antenna for ultrawideband communications. Progress In Electromagnetics Research M, 3. pp. 57-78. ISSN 1937-8726

Muhammad Mahbubur, Rashid and Nasrudin Abd, Rahim and Mohamed Azlan, Hussain and Faisal A., Mohamed and Mahmudur Azizur, Rahman (2008) Development and testing of hybrid fuzzy logic controller for car suspension system using magneto-rheological damper. In: Industry Applications Society Annual Meeting, 2008. IAS'08. IEEE, 5 - 9 October 2008, Edmonton, AB; Canada.

Murad, Fatin Nabilah and Kabbashi, Nassereldeen Ahmed and Alam, Md. Zahangir and Al-Khatib, Ma An Fahmi Rashid (2008) Immobilization of fungal biomass with multi-walled carbon nanotubes as biosorbent. Malaysian Journal of Microbiology, 14 (2 (Special issue)). pp. 113-119. ISSN 1823-8262 E-ISSN 2231-7538

Musse, Mohamud Ahmed and Soo, W. L. (2008) Power line carrier (PLC) based communication system for distribution automation system. In: 2nd IEEE International Conference on Power and Energy (PECon 08), December 1-3, 2008, Johor Baharu, Malaysia, 1st - 3rd December 2008, Johor Bahru, Malaysia.

Musse, Mohamud Ahmed and Soo, Wai Lian (2008) Supervisory control and data acquisition system (SCADA) based customized remote terminal unit (RTU) for distribution automation system. In: 2nd IEEE International Conference on Power and Energy (PECon 08), December 1-3, 2008, Johor Baharu, Malaysia, 1st - 3rd December 2008 , Johor Bahru.

Muyibi, Suleyman Aremu and Ambali, Abdul Rauf and Eissa, Garout Suleyman (2008) The impact of economic development on water pollution: trends and policy actions in Malaysia. Water Resource Management, 22 (4). pp. 485-508. ISSN 0920-4741 E-ISSN 1573-1650

R

Rahman, Mohammed Ataur and Mohiuddin, A. K. M. and Yahya, Azmi (2008) Hybrid electrical air-cushion tracked vehicle for swamp peat in Malaysia. In: Automotive Engineering Congress, 2008, July 2008, Germany.

S

Sazedur Rahman, M. and Saleh, Tanveer and Lim, H.S. and Son, S.M. and Rahman, M. (2008) Development of an on-machine profile measurement system in ELID grinding for machining aspheric surface with software compensation. International Journal of Machine Tools and Manufacture, 48 (7-8). pp. 887-895. ISSN 0890-6955

Senan Mahmod, Zainab and Hassan Abdalla Hashim, Aisha and Al-Irhayim, Sufyan and Khan, Sheroz (2008) Review and evaluation of the proposed wireless mesh routing protocols. In: International Conference on Computer and Communication Engineering 2008 (ICCCE08) , 13th-15th May 2008, Kuala Lumpur.

Shittu, W. A. and Bajoga, B.G. and Anwar, Farhat and Salami, Momoh Jimoh Eyiomika (2008) Prediction of received signal power and propagation path loss in open/rural environments using modified free-space loss and Hata models. In: IEEE International RF and Microwave Conference 2008, 2 - 4th December 2008, Kuala Lumpur.

Shittu, W. A. and Hassan Abdalla Hashim, Aisha and Anwar, Farhat and Al-Khateeb, Wajdi Fawzi Mohammed (2008) A proposed QoS multicast routing framework for next-generation Wireless Mesh Network. International Journal of Computer Science and Network Security (IJCSNS), 8 (9). pp. 280-284. ISSN 1738-7906

Shuriye, Abdi Omar (2008) Aspects of civilizational Islam. Australian Journal of Islamic Studies, 1 (2). pp. 21-38. ISSN 1834-6170

Shuriye, Abdi Omar (2008) Rights of fetus in Muslim jurisprudence. Australian Journal of Islamic Studies (AJIS), 1 (2). pp. 23-33. ISSN 1834-6170

Sidek, Shahrul Na'im and Sarkar, Nilanjan (2008) Inclusion of wheel slips in mobile robot modelling to enhance robot simulator performance. In: 3rd International Conference on Mechatronics (ICOM 08), 18-20 Dec 2008, Kuala Lumpur.

T

Toibah, A. R. and Sopyan, Iis and Abd Shukor, Mohd Hamdi and S., Ramesh (2008) Development of magnesium-doped biphasic calcium phosphate through sol-gel method. In: 4th Kuala Lumpur International Conference on Biomedical Engineering 2008, 25 – 28 June 2008, Kuala Lumpur, Malaysia.

W

Wan Salim, Wan Wardatul Amani and Ding, Zhenweng and Ziaie, Babak (2008) A hydrogel stamper with expandable height and built-in reservoirs for patterning biomolecules on 3D topologies. In: 2007 IEEE 20th International Conference on Micro Electro Mechanical Systems (MEMS), 21st-25 January 2007, Kobe, Japan.

Y

Yaakob, Naimah and Anwar, Farhat and Suryady, Zeldi and Hassan Abdalla Hashim, Aisha (2008) Investigating mobile motion prediction in supporting seamless handover for high speed mobile node. In: International Conference on Computer and Communication Engineering 2008 (ICCCE08) , 13th-15th May 2008, Kuala Lumpur.

This list was generated on Tue Aug 11 16:06:31 2020 +08.