Items where Division is "Kulliyyah of Engineering > Department of Science" and Year is 2022

A

Ab Aziz, Siti Hajar and Mohd Nor, Norhanis Aida and Zainal Abidin, Mohd. Shahnan (2022) Performance analysis of a hybrid free space optics/ visible light communication systems. Asian journal of electrical and electronic engineering, 2 (2). pp. 21-27. E-ISSN 785-8189

Akhmedov, Abdulkasim and Salleh, Zuki and Rakhimov, Abdumalik (2022) The approximation of the solution of heat conduction problem in circular plate with concentrated initial heat. In: 3rd International Conference on Applied & Industrial Mathematics and Statistics 2022 (ICoAIMS 2022), 24-26 August 2022, Gambang. (Unpublished)

B

Baharudin, Izzaty Syahirah and Mohamed Noor, Noraini and Othman, Raihan and Chan Abdullah, Ezzat and Mujawar, Mubarak N. (2022) Magnetically modified sugarcane bagasse biochar as cadmium removal agent in water. IIUM Engineering Journal, 23 (1). pp. 294-309. ISSN 1511-788X E-ISSN 2289-7860

G

Ghosh, Indranil and Chowdhury, Md Sazzad Hossien and Mt Aznam, Suazlan (2022) Numerical treatment on a chaos model of fluid flow using new iterative method. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 96 (1). pp. 25-35. ISSN 2289-7879

Ghosh, Indranil and Rashid, Muhammad Mahbubur and Ghosh, Pallabi and Mawa, Shukranul and Roy, Rupal and Ahsan, Md Manjurul and Gupta, Kishor Datta (2022) Accurate numerical treatment on a stochastic SIR epidemic model with optimal control strategy. technologies, 10 (4). pp. 1-20. ISSN 2227-7080

H

Hamidon, Nor 'Ezzati and Manshor, Hanisah and Ahmad Azhar, Ahmad Zahirani and Rejab, Nik Akmar and Mohd Ali, Afifah (2022) The effects of MWCNT addition to physical properties of ZTA-MgO cutting tool. In: 10th International Conference on X-Rays and Related Techniques in Research and Industry (ICXRI 2021), 18th - 19th August 2021, Virtual Conference.

Hanouf, Zahir and Abdelrahman, Ahmed and Ahmad, Kartini (2022) An investigation on structural dynamic modification of a machine casing. In: 5th International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2021), 21-23 June 2021, Kuala Lumpur, Malaysia.

Hasbullah, Mohd Faiz Ikhwan and Mohamed Noor, Noraini (2022) Studies on durian peel biomass derived activated carbon for energy storage application. International Journal of Electroactive Materials, 10 (1). pp. 68-77. E-ISSN 2289-8360

I

Inche Ibrahim, Mohd Lukman and Anvar A., Zakhidov (2022) An improved model for describing the net carrier recombination rate in semiconductor devices. Applied Physics A: Materials Science and Processing, 128. pp. 1-11. ISSN 0947-8396 E-ISSN 1432-0630

L

Lukman Hekiem, Nurul Liyana and Md Ralib @ Md Raghib, Aliza 'Aini and Mat Harttar @ Mohd Hatta, Maziati Akmal and Ahmad, Farah and Ab. Rahim, Rosminazuin and Za'bah, Nor Farahidah and Sugandi, Gandi (2022) Chitosan coating on quartz crystal microbalance gas sensor for isopropyl alcohol and acetone detection. International Journal of Integrated Engineering, 14 (3). pp. 241-244. ISSN 2229-838X E-ISSN 2600-7916

M

Manshor, Hanisah and Mohd Ali, Afifah and Ahmad Azhar, Ahmad Zahirani (2022) Effect of pressure load on the physical properties of ZTA-TiO2-Cr2O3. In: 10th International Conference on X-Rays and Related Techniques in Research and Industry, ICXRI 2021, 18-19 August 2021, Kuala Lumpur.

Mohd KH.M, Abu El Shaikh and Abdurahim, Okhunov and Hasan, Abu Kassim and Leong, Yoon Tiem (2022) The effect of the quantization of the centrifugal stretching on the analysis of the rotational spectra of even-even nuclei. Sains Malaysiana, 51 (4). pp. 1213-1227. ISSN 0126-6039 E-ISSN 2735-0118

Mudzaffar, Raqibah Najwa and Manshor, Hanisah and Ahmad Azhar, Ahmad Zahirani and Rejab, Nik Akmar and Mohd Ali, Afifah (2022) Comparative study on the wears of ZTA-TiO2-Cr2O3 ceramic cutting tool and commercial ceramic cutting tool. In: 10th International Conference on X-Rays and Related Techniques in Research and Industry (ICXRI 2021), 18th - 19th August 2021, Virtual Conference.

Mustafa, Aisyah Madihah and Shahruddin, Najlah Sakinah and Abd Halim, Nor Farah Huda and Rozhan, Alya Naili and Mohd Hatta, Maziati Akmal (2022) The effect of cutting speeds on tool wear and surface roughness when milling carbon fiber reinforced polymer. In: 5th International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2021), 21-23 June 2021, Kuala Lumpur, Malaysia.

N

Nagoor Gunny, Ahmad Anas and Anak Seminai, Jenny Janam and Che Mat, Mohd Hishamuddin and Ahmad, Abdul Aziz and Yusof, Rizana and Abdullah, Fadhilnor (2022) The antifungal activity of essential oil extracted from Melaleuca alternifolia against pathogenic fungi on mango (Mangifera Indica L.) for mango postharvest application. Materials Science Forum, 1069. pp. 271-280. ISSN 0255-5476 E-ISSN 1662-9752

O

Okhunov, Abdurahim and Usmanov, Phazlitdin and Mohd KH.M, Abu El Shaikh (2022) Rotational spectra of even-even actinide and rare-earth nuclei. In: LXXII International Conference NUCLEUS-2022, Moscow.

R

Rakhimov, Abdumalik (2022) Convergence of the FourierLaplace series in the spaces with mixed norm. In: 6th International Conference on Mathematical Applications in Engineering (ICMAE’22), 9-10 August 2022, Virtual. (Unpublished)

Rakhimov, Abdumalik (2022) On the approximation of the function on the unite sphere by the spherical harmonics. In: Computational Models and Technologies (CMT2022), 14-17 September 2022, NUU Uzbekistan. (Unpublished)

Roshidan, Nursamirah and Majdi, Najiebah and Manshor, Hanisah and Rozhan, Alya Naili and Ahmad Azhar, Ahmad Zahirani (2022) The effect of carbon infiltration through CVI techniques on the physical properties of ZTA. Journal of Advanced Research in Applied Sciences and Engineering Technology, 28 (2). pp. 291-300. ISSN 2462-1943

Roshidan, Nursamirah and Manshor, Hanisah and Rozhan, Alya Naili and Ahmad Azhar, Ahmad Zahirani (2022) The effect of polyvinyl alcohol addition on the solid carbon infusion in zirconia-toughened alumina. In: 10th International Conference on X-Rays and Related Techniques in Research and Industry, ICXRI 2021, 18 - 19 August 2021, Kuala Lumpur.

Roslan, Farah Sakiinah and Saidin, Norazlina and Mat Harttar @ Mohd Hatta, Maziati Akmal and Hasbullah, Nurul Fadzlin and Thirunavakkarasu, Punithavathi M. (2022) Characterization of ZnO–TiO2-coated tapered fibres synthesized by a low-temperature hydrothermal method. Ukrainian Journal of Physical Optics, 23 (2). pp. 96-106. ISSN 1609-1833 E-ISSN 1816-2002

Russel, Edwin and Wamiliana, Wamiliana and Nairobi, Saibi and Warsono, Warsono and Usman, Mustofa and Daoud, Jamal Ibrahim (2022) Dynamic modeling and forecasting data energy used and Carbon Dioxide (CO2). Science and Technology Indonesia, 7 (2). pp. 228-237. E-ISSN 2580-4391

S

Syauqi Syahid Mohammed, Nadia and Mat Harttar, Maziati Akmal and Ahmad, Farah (2022) Fabrication of biopolymer-based piezoelectric thin film from chitosan using solvent casting method. Journal of Advanced Research in Applied Sciences and Engineering Technology, 28 (2). pp. 80-89. E-ISSN 2462-1943

Z

Zamlia, Mohamad Izzuddin and Mohd Hatta, Maziati Akmal and Ahmad, Farah and Hisham, Firzanah (2022) Piezoelectric performance of microbial chitosan thin film derived from aspergillus oryzae. International Journal of Renewable Energy Development, 11 (4). pp. 1157-1164. ISSN 2252-4940