Items where Division is "Kulliyyah of Engineering > Department of Manufacturing and Materials Engineering" and Year is 2025

Maleque, Md. Abdul and Samat, Noorasikin and Ahmad Azhar, Ahmad Zahirani and Nordin, Norhuda Hidayah and Rozhan, Alya Naili and Mokhtar, Suhaily, eds. (2025) Proceeding of 6th International Conference on Advances in Manufacturing and Materials Engineering. Lecture Notes in Mechanical Engineering . Springer, Singapore. ISBN 978-981-96-3813-0

Maleque, Md. Abdul and Samat, Noorasikin and Ahmad Azhar, Ahmad Zahirani and Mokhtar, Suhaily and Nordin, Norhuda Hidayah and Rozhan, Alya Naili, eds. (2025) Proceeding of 6th International Conference on Advances in Manufacturing and Materials Engineering: ICAMME 2024, 13–14 August, Kuala Lumpur, Malaysia. Lecture Notes in Mechanical Engineering . Springer, Singapore. ISBN 978-981-96-3813-0

Ahmad Saidi, Muhammad Akmal and Lai, Jau Choy and Hassan, Azman and Wahit, Mat Uzir and Anuar, Hazleen (2025) Graphene‑based nanofllers and compatibilizers: their infuences on thermal and thermomechanical properties of PBT/PET nanocomposites. Iranian Polymer Journal (English Edition). ISSN 10261265

Ariff, Tasnim Firdaus and Ismail, Ummu Aisyah (2025) Reducing tool wear with hybrid microwave treated TiCN coated tool and recycled cooking oil in MQL machining of T6061 aluminium alloy. Jurnal Kejuruteraan, 37 (1). pp. 499-506. ISSN 0128-0198 E-ISSN 2289-7526

Guzali, Hazim and Ayob, Nur Idayu and Mohamad, Muhammad Naim Hanif and Zamzuri, Ahmad Syahmi and Che Hak, Cik Rohaida and Ahmad, Zuraida and Md Ralib @ Md Raghib, Aliza 'Aini (2025) High energy electron radiation inducing non-homogeneous structural changes on single layer graphene/SiO2/Si substrate. Radiation Physics and Chemistry, 235. ISSN 0969-806X E-ISSN 1879-0895

Kamaruddin, Shafie and Ridzuan, Arman Hilmi and Sukindar, Nor Aiman (2025) Optimisation of Surface Roughness in 3D Printing Using the Bees Algorithm. In: Intelligent Engineering Optimisation with the Bees Algorithm. Springer, pp. 197-207. ISBN 978-3-031-64935-6

Kamaruddin, Shafie and Shamsulamri, Saiffaqrullah and Sharwazi, Muhammad Haziq Fakhri and Suhaimi, Muhammad Harith Ikhmal and Mohamad, Muhamad Ariff Othmani and Sukindar, Nor Aiman and Ahmad Azhar, Ahmad Zahirani (2025) An automated Printed Circuit Board (PCB) defects detection system. In: ICAMME 2024, 13 - 14 August 2024, Kuala Lumpur, Malaysia.

Maleque, Md. Abdul and Zawawi, Muhammad Zaidul Abrar and Efeoglu, Ihsan and Gulten, Gokhan and Rahman, Md Mustafizur and Zulkifli, Nurin Wahidah (2025) Niobium-doped diamond-like carbon coatings on metallic alloy and their tribological performance in biodiesel environment Environment. In: ICAMME 2024, 13–14 August 2024, Kuala Lumpur, Malaysia.

Merabet, Boualem and Maleque, Md. Abdul and Belhachi, Sofyane and Masood, A Ibnu and Hossain, Mohammad Sayeed and Algethami, Abdullah A and Ali, Hafiz T (2025) Predicting thermoelectric performance of AlGaSbAs-based systems for thermo-photovoltaic cell applications. Physica Scripta, 100 (3). pp. 1-15. ISSN 0281-1847 E-ISSN 1402-4896

Mohd Nazeri, Fatin Nurafiqah and Anuar, Hazleen and Manshor, Mohd Romainor (2025) Mechanical properties, morphology and chemical interactions of 3D printed polylactic acid/bio-based polyurethane blends. In: ICAMME 2024, 13–14 August 2024, Kuala Lumpur, Malaysia.

Naping, Rosmia and Maleque, Md. Abdul and Sarifuddin, Norshahida and Hj Hassan, Masjuki and Mohd Zulkifli, Nurin Wahidah (2025) Effects of heat input on the morphology and hardness of hybrid coating. In: ICAMME 2024, 13–14 August 2024, Kuala Lumpur, Malaysia.

Omar, Mohamad Firdaus and Ali, Fathilah and Tukiman, Fatehannie and Al-Khatib, Ma'an Fahmi Rashid and Anuar, Hazleen (2025) The influence of coated-carbon nanofiber (cCNF) in styrene-butadiene rubber (SBR) for potential application in automotive components. In: Rubber Composites: Recycling, Processing, Properties, Design and Applications. Woodhead Publishing in Materials, United States, pp. 213-221. ISBN 978-0-443-23620-4

Parvez, Md. Shohan and Rahman, Md Mustafizur and Samykano, Mahendran and Maleque, Md. Abdul (2025) Interfacial mechanism of sulfonic acid-doped polyaniline/ cotton fabric for maximized electrical properties and tailored surface functionality. Surfaces and Interfaces, 65. pp. 1-14. ISSN 2468-0230

Purwanto, Hadi and Rozhan, Alya Naili and Zulaini, Danial Faiz and Ani, Mohd Hanafi (2025) Utilization of MSW-derived biochar for production of iron through solid-solid reaction. IIUM Engineering Journal, 26 (2). pp. 230-239. ISSN 1511-788X E-ISSN 2289-7860

Samat, Noorasikin and Mohamad Roshidi, Muhamad Aliff Redhwan and Don Ramlan Onn, Dona Nur Afiqah and Mat Harttar @ Mohd Hatta, Maziati Akmal and Sabaruddin, Fatimah A’thiyah (2025) Synergistic effects of double oxidation on the extraction and characterization of crystalline nanocellulose from rattan waste and kenaf fiber. Science and Technology Indonesia, 10 (2). pp. 411-419. ISSN 2580-4405 E-ISSN 2580-4391

Samat, Noorasikin and Nasrudin, Raimi Fariz (2025) Effect of electron beam irradiation on the properties of poly(vinyl) alcohol (PVA)-cellulose nanocrystal hybrid aerogel. In: International Conference on Bioengineering and Technology (IConBET2023), 29–30 August 2023, Kelantan, Malaysia.

Serati, Flora and Mohd Zaki, Syazwani and Zulkifli, Ahmad Akid and Makhsin, Siti Rabizah (2025) Solar-driven water purification: advancing PVA-Chitosan/PANI hydrogel to enhance solar vapor generation for freshwater treatment. IIUM Engineering Journal, 26 (1). pp. 450-465. ISSN 1511-788X E-ISSN 2289-7860

Sohif, Hajar Naemah and Wan Sulaiman, Wan Muhammad Zulfadhli and Manshor, Hanisah and Ahmad Azhar, Ahmad Zahirani and Sukindar, Nor Aiman (2025) Experimental investigation on surface roughness, hardness, and tensile strength of rice Husk (RH) as a filler for formulation of polyethylene- Terephthalate Glycol (PETG) 3D filament. Semarak International Journal of Material Research, 2 (1). pp. 1-11. ISSN 3083-8908

binti Abd Rahim, Nuranisa Suhada and Yang, Chuan Choong and Sukindar, Nor Aiman (2025) Prospect for pico-hydropower generation from 3D printed Polyethylene Terephthalate Glycol (PETG) polymer: a case study in Pusu River, Malaysia. Case Studies in Chemical and Environmental Engineering, 11. pp. 1-12. E-ISSN 2666-0164