Items where Division is "Kulliyyah of Engineering > Department of Manufacturing and Materials Engineering" and Year is 2023

Article

Abd Halim, Nor Farah Huda and Mustafa, Aisyah Madihah and Shaharudin, N.S. and Dahnel, Aishah Najiah and Tomadi, Siti Haryani and Ahmad, Zuraida and Adesta, E.Y.T. and Rahman, M. (2023) Tool wear and wear mechanism of WC-Co End Mill during milling of CFRP in sustainable cutting conditions. Materials Science Forum, 1109. pp. 153-158. ISSN 0255-5476 E-ISSN 1662-9752

Abdehalim Ahmed Eid, Mohamed Moustafa and Mohd Nashrul, Mohd Zubir and Muhammad, Mohd Ridha and Md. Salim Newaz, Kazi and Mt Aznam, Suazlan and Md Mehedy, Hasan Rony and Ibrahim, F. A. and Alam, Md Shadab and Sadri, Rad (2023) Experimental and numerical investigations on the effect of a novel internal surface micro grooving towards improving convective heat transfer performance of tube heat exchangers. Physics of Fluids, 35 (7). pp. 1-21. ISSN 1070-6631 E-ISSN 1089-7666

Abu Hassan, Nur Hudawiyah and Fadil, Nor Akmal and Jamal, Nur Ayuni and Mohd Daud, Farah Diana and Nordin, Norhuda Hidayah (2023) Decolorization kinetics of azo dye (methyl orange) in Fenton process with high entropy alloys as catalyst. Materials Science Forum, 1111. pp. 145-150. ISSN 0255-5476 E-ISSN 1662-9752

Al-Daas, Aseel and Azmi, Azlin Suhaida and Ali, Fathilah and Anuar, Hazleen (2023) The effect of alkaline treatment to pseudo-stem banana fibers on the performance of polylactic acid/ banana fiber composite. Journal of Natural Fibers, 20 (1). pp. 1-13. ISSN 1544-0478 E-ISSN 1544-046X

Alli, Yakubu Adekunle and Anuar, Hazleen and Manshor, Mohd Romainor and Bankole, Owolabi Mutolib and Abd Rahman, Nurul Amirah and Olatunde, Simeon Kayowa and Omotola, Elizabeth Oyinkansola and Oladoye, Peter Olusakin and Ejeromedoghene, Onome and Suhr, Jonghwan and Sukindar, Nor Aiman and Mohd Nasir, Nur Aimi (2023) Influence of nanocomposites in extrusion-based 3D printing: a review. Hybrid Advances, 3. pp. 1-10. ISSN 2773-207X

Alli, Yakubu Adekunle and Oladoye, Peter Olusakin and Matebese, Funeka and Senehi, Naomi L. and Alimi, Oyekunle Azeez and Ogunlaja, Adeniyi Sunday and Abdi, Fatwa F. and Anuar, Hazleen and Adeleye, Adeyemi S. and Philippot, Karine (2023) Step-scheme photocatalysts: promising hybrid nanomaterials for optimum conversion of CO2. Nano Today, 53 (1). pp. 1-30. ISSN 1748-0132 E-ISSN 1878-044X

Alli, Yakubu Adekunle and Oladoye, Peter Olusakin and Onawole, Abdulmujeeb T. and Anuar, Hazleen and Adewuyi, Sheriff and Ogunbiyi, Olutobi Daniel and Philippot, Karine (2023) Photocatalysts for CO2 reduction and computational insights. Fuel, 344. pp. 1-18. ISSN 0016-2361 E-ISSN 1873-7153

Anuar, Hazleen (2023) “Communiversity”: Students and community members work together for better environment. Asia Research News. (Unpublished)

Anuar, Hazleen and Abd Rahman, Nurul Amirah and Manshor, Mohd Romainor and Alli, Yakubu Adekunle and Alimi, Oyekunle Azeez and Alif, Fathilah and Suhr, Jonghwan (2023) Novel soda lignin/PLA/EPO biocomposite: a promising and sustainable material for 3D printing filament. Materials Today Communications, 35. pp. 1-14. ISSN 2352-4928

Anuar, Hazleen and Yakubu Adekunle, Alli (2023) A call to action: building sustainable environment for the people and the planet. e-estidotmy: memperkaya minda dengan STEM.

Azahari, Nur Najma Athirah and Anuar, Hazleen and Hassan, Azman and Jawaid, Mohammed and Halim, Zahurin and Samsudin, Sani Amril (2023) Thermal, dynamic mechanical, mechanical and flammability properties of halloysite nanotubes filled polyamide 11 nanocomposites. Malaysian Journal of Fundamental and Applied Sciences, 19 (2). pp. 173-193. ISSN 2289-5981 E-ISSN 2289-599X

Hassan, N. H. A and Nasir, N.S.M and Rahman, S. N. A. and Irfan, A. R. and Nordin, Norhuda Hidayah (2023) Development of high entropy alloy as catalyst for azo dye degradation in Fenton process. Archives of Metallurgy and Materials, 68 (1). pp. 209-213. ISSN 1733-3490 E-ISSN 2300-1909

Ideris, Muhammad Haziq and Kamaruddin, Shafie and Sulaiman, Mohd Hafis and Sukindar, Nor Aiman and Ahmad Azhar, Ahmad Zahirani and Md Yasir, Ahmad Shah Hizam (2023) Effects of coating and lubrication on friction and wear for metal-to metal application. Journal of Advanced Research in Applied Mechanics, 110 (1). pp. 52-62. E-ISSN 2289-7895

Iftekar, Syed Fouzan and Aabid, Abdul and Amir, Adibah and Baig, Muneer (2023) Advancements and limitations in 3D printing materials and technologies: a critical review. Polymers, 15 (11). pp. 1-23. ISSN 2073-4360

Iftekar, Syed Fouzan and Sukindar, Nor Aiman and Amir, Adibah and Azami, Muhammad Hanafi and Aabid, Abdul (2023) Enhancing metal 3D printing with fused deposition modeling - a short review. International Journal of Research and Analytical Reviews (IJRAR), 10 (2). pp. 424-428. ISSN 2349-5138 E-ISSN 2348-1269

Illias, Suhaimi and Hussain, Suhaila and Ishak, Mohamad Shaiful Ashrul and Abdul Rahman, Md. Tasyrif and Awang @ Hasyim, Syamsul Syahrun and Selamat, Salsuwanda and Ani, Mohd Hanafi (2023) Single droplet size and volume measurement – comparison between experiment and theory. Journal of Mechanical Engineering, 20 (1). pp. 233-243. ISSN 1823-5514 E-ISSN 2550-164X

Jaswir, Irwandi and Sari, Dian Permata and Che Daud, Mohd Radzi and Sukmana, Raditya (2023) Motives for participation in halal food standard implementation: an empirical study in Malaysian halal food industry. International Journal of Islamic and Middle Eastern Finance and Management, 16 (5). pp. 928-954. ISSN 1753-8394

Khair, Nazmus Sakib and Abu Talip Yusof, Nurhafizah and Abdul Wahab, Yasmin and Bari, Bifta Sama and Ayob, Nur Idayu and Zolkapli, Maizatul (2023) Substrate-integrated waveguide (SIW) microwave sensor theory and model in characterising dielectric material: a review. Sensors International, 4. E-ISSN 2666-3511

Kharboot, Layla Haythoor and Fadil, Nor Akmal and Abu Bakar, Tuty Asma Abu Bakar and Mohd Najib, Abdillah Sani and Nordin, Norhuda Hidayah and Ghazali, Habibah (2023) A review of transition metal sulfides as counter electrodes for dye-sensitized and quantum dot-sensitized solar cells. Materials, 16 (7). pp. 1-27. ISSN 1996-1944

Lee, Pei May and Yang, Chuan Choong and Kwong, Wei Choong (2023) An exploratory study on students’ electricity consumption in RCE Gombak for sustainable communities. Malaysian Journal of Social Sciences and Humanities, 8 (3). pp. 1-12. E-ISSN 2504-8562

Manshor, Mohd Romainor and Alli, Yakubu Adekunle and Anuar, Hazleen and Ejeromedoghene, Onome and Omotola, Elizabeth Oyinkansola and Suhr, Jonghwan (2023) 4D printing: historical evolution, computational insights and emerging applications. Materials Science and Engineering: B, 295 (September 2023). pp. 1-11. ISSN 0921-5107 E-ISSN 1873-4944

Mazlan, Mohd Rafiq and Jamadon, Nashrah Hani and Armin, Rajabi and Sulong, Abu Bakar and Mohamed, Intan Fadhlina and Yusof, Farazila and Jamal, Nur Ayuni (2023) Necking mechanism under various sintering process parameters – a review. Journal of Materials Research and Technology, 23. pp. 2189-2201. ISSN 2238-7854 E-ISSN 2238-7854

Mohamad Jamil, Nur Arifah and Mohamaddiah, Ahmad Hadi and Azami, Muhammad Hanafi and Nordin, Norhuda Hidayah (2023) High entropy alloy as metal additive for hybrid rocket propellant. Materials Today: Proceedings, 75 (Part 1 (January 2023)). pp. 140-146. E-ISSN 2214-7853

Mohd Shatar, Nursyahirah and Mohd Sabri, Mohd Faizul and Mohd Salleh, Mohd Faiz and Ani, Mohd Hanafi (2023) Energy, exergy, economic, environmental analysis for solar still using partially coated condensing cover with thermoelectric cover cooling. Journal of Cleaner Production, 387. pp. 1-11. ISSN 0959-6526 E-ISSN 1879-1786

Mohd Shatar, Nursyahirah and Mohd Sabri, Mohd Faizul and Mohd Salleh, Mohd Faiz and Ani, Mohd Hanafi and Xie, Xitong and Weck, Arnaud (2023) Femtosecond laser induced porous surface on polymethyl methacrylate for filmwise condensation to improve solar still productivity. Desalination, 568. pp. 1-9. ISSN 0011-9164 E-ISSN 1873-4464

Mohd Zain, Zakaria and Rashid, Mir Akmam Noor and Khan, Sher Afghan and Khan, Ahsan Ali (2023) Analysis and modeling of surface roughness in powder mix EDM and pure EDM using central composite design. Journal of Advanced Research in Applied Sciences and Engineering Technology, 30 (1). pp. 243-254. ISSN 2462-1943

Mustafa, Aisyah Madihah and Abd Halim, Nor Farah Huda and Tomadi, Siti Haryani and Shahruddin, Najlah Sakinah and Nasaruddin, Ricca Rahman (2023) Analysis on tool wear during milling carbon fiber reinforced polymer in dry, coolant and chilled air condition. Jurnal Tribologi, 36 (March 2023). pp. 99-107. E-ISSN 2289-7232

Odiwo, Hammed and Kamilu Adeyemi, Bello and Malik, Abdulwahab and Abdulmumin Adetayo, Adebisi and Umma, Abdullahi and Mamuda, Dodo Rayyan and Maleque, Md. Abdul and Muhammad Uhuotu, Suleiman (2023) Study on the optimization of surface modification processing of SiCp and tribological properties of AA6061-SiCp based composites. International Journal of Engineering Materials and Manufacture, 8 (1). pp. 1-12. E-ISSN 0128-1852

Paijan, Lailatul Harina and Maleque, Md. Abdul (2023) Morphological and wear behavior of low temperature thermochemical gaseous nitriding process. Jurnal Tribologi, 36. pp. 57-69. E-ISSN 2289-7232

Paijan, Lailatul Harina and Maleque, Md. Abdul and Abu Bakar, Mohd Hadzley and Mamat, Mohd Fauzi and Osman, Mohd Hairizal and Rosli, Nor Ana and Asari, Mohd Rashidi (2023) Influence of microstructure on the hardness behavior of AISI duplex-2205 composite layer by TIG cladding. Malaysian Journal of Microscopy, 19 (1). pp. 118-128. ISSN 1823-7010 E-ISSN 2600-7444

Paijan, Lailatul Harina and Maleque, Md. Abdul and Adeyemi, Bello Kamilu and Mamat, Mohd Fauzi and Hussein, Nur Izan Syahriah (2023) Influence of ceramic particles size on the incorporation of SiC into stainless steel material using 480 J/mm heat input for tribological applications. Jurnal Tribologi, 37. pp. 15-28. E-ISSN 2289-7232

Parveez, Bisma and Jamal, Nur Ayuni and Aabid, Md. Abdul and Baig, Alya Naili (2023) Microstructure and strengthening effect of coated diamond particles on the porous aluminum composites. Materials, 16 (8). pp. 1-12. ISSN 1996-1944

Parveez, Bisma and Jamal, Nur Ayuni and Maleque, Md. Abdul and Ahmad Azhar, Ahmad Zahirani and Mohd Zaki, Hafizah Hanim and Aabid, Abdul and Baig, Muneer (2023) Improvement in effectiveness of diamond in strengthening the porous aluminium composite. Journal of Materials Research and Technology, 25. pp. 25-37. ISSN 2238-7854

Parveez, Bisma and Jamal, Nur Ayuni and Mohamed Saleem, Muhammad Raeez (2023) Effect of uncoated and coated diamond on the compressive properties of porous aluminium composites. Materialwissenschaft und Werkstofftechnik, 54 (9). pp. 1114-1121. ISSN 1521-4052 E-ISSN 0933-5137

Parveez, Bisma and Jamal, Nur Ayuni and Mohamed Saleem, Muhammad Raeez (2023) Investigation of morphology and compressive properties of diamond reinforced porous aluminium composites. Asian Journal of Fundamental and Applied Sciences, 4 (1). pp. 12-17. E-ISSN 2716-5957

Parveez, Bisma and Jamal, Nur Ayuni Jamal and Maleque, Md. Abdul and Rozhan, Alya Naili and Aabid, Abdul and Baig, Muneer (2023) Optimizing the compressive properties of porous aluminum composites by varying diamond content, space holder size and content. Materials, 16 (3). pp. 1-19. ISSN 1996-1944

Rozeman, Salfarina and Adesta, Erry Yulian Triblas and Sophian, Ali and Tomadi, Siti Haryani (2023) Improvement activities in stamping die manufacturing: a systematic literature review. International Journal of Engineering Materials and Manufacture, 8 (2). pp. 21-35. E-ISSN 0128-1852

Sabri, Muhammad Ezamuddin Ezzad and Azami, Muhammad Hanafi and Abdullah, Nur Azam and Nordin, Norhuda Hidayah (2023) Investigation of regression rate end-burning typed hybrid rocket motor. Journal of Aeronautics, Astronautics and Aviation, 55 (3S). pp. 485-494. ISSN 1990-7710

Salleh, Mohd Syahmi and Yunus, Muhamad Fahmi and Ahmad, Azmir and Haris @ Harith, Muhammad Salahuddin and Kassim, Salina and Amir, Adibah and Udin, Hashim and Md Yusof, Muhammad Zakiyuddin and Hamid, Muhammad Zulhariz (2023) Integrated farming of stingless bee and pesticide-free chilli fertigation: sharing experience from knowledge transfer project (KTP-RIGS) with Persatuan Anak Kuantan Utara and Organic Farm Venture. Revelation and Science, 1 (Special Issue 1). pp. 71-79. ISSN 2229-9645 E-ISSN 2229-9947

Samat, Noorasikin and Shafiee, Muhd Izzudin and Syed Bakar, Sharifah Shahnaz (2023) Mechanical and morphological properties of cellulose-reinforced thermoplastic composites: effect of recycling. Journal of Engineering Science and Technology, 18 (1). pp. 70-82. ISSN 1823-4690

Septiyana, Diah and Abd Rahman, Mohamed and Mohamed Ariff, Tasnim Firdaus and Sukindar, Nor Aiman and Adesta, Erry Yulian Triblas (2023) Enhancing water sustainability index assessment through risk management, IoT, and artificial intelligence in water operation: a review. Water Conservation & Management, 7 (2). pp. 97-106. ISSN 2523-5664 E-ISSN 2523-5672

Septiyana, Diah and Abd. Rahman, Mohamed and Mohamed Ariff, Tasnim Firdaus and Sukindar, Nor Aiman and Triblas Adesta, Erry Yulian (2023) Enhancing sustainability index parameter using ANFIS computational intelligence model. IIUM Engineering Journal, 24 (2). pp. 258-268. ISSN 1511-788X E-ISSN 2289-7860

Shahruddin, Najlah Sakinah and Abd Halim, Nor Farah Huda and Mustafa, Aisyah Madihah and Tomadi, Siti Haryani and Mahad, Muhammad Akmal and Adesta, Erry Yulian Triblas (2023) Effect of feed rate on tool wear and surface condition during milling of CFRP. Jurnal Tribologi, 38. pp. 40-48. E-ISSN 2289-7232

Sharuddin, Muhammad Hazman and Sulaiman, Mohd Hafis and Kamaruddin, Shafie and Dahnel, Aishah Najiah and Abd Halim, Nor Farah Huda and Mohd Jamir, Mohd Ridzuan and Abdul-Rani, Ahmad Majdi (2023) Properties and tribological evaluation of graphene and fullerene nanoparticles as additives in oil lubrication. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 237 (8). pp. 1647-1656. ISSN 1350-6501 E-ISSN 2041-305X

Sukindar, Nor Aiman (2023) Tech transfer boosts Sarawak’s handcraft businesses. Asia Research News (17 March 2023).

Yakubu Adekunle, Alli and Peter Olusakin, Oladoye and Abdulmujeeb T., Onawole and Anuar, Hazleen and Sheriff, Adewuyi and Olutobi Daniel, Ogunbiyi and Karine, Philippot (2023) Photocatalysts for CO2 reduction and computational insights. Fuel, 344. pp. 1-18. ISSN 0016-2361 E-ISSN 1873-7153

Yap, Suk Wy and Johari, Norhasnidawani and Mazlan, Saiful Amri and Syed Ahmad, Syarifah Nur Aqida and Arifin, Rizal and Hassan, Noor Azlina and Johari, Mohd Aidy Faizal (2023) Superhydrophobic zinc oxide/epoxy coating prepared by a one-step approach for corrosion protection of carbon steel. Journal of Materials Research and Technology, 25. pp. 5751-5766. ISSN 2238-7854 E-ISSN 2214-0697

Book

Maleque, Md. Abdul and Ahmad Azhar, Ahmad Zahirani and Sarifuddin, Norshahida and Syed Shaharuddin, Sharifah Imihezri and Mohd Ali, Afifah and Abdul Halim, Nor Farah Huda, eds. (2023) Proceeding of 5th International Conference on Advances in Manufacturing and Materials Engineering. Lecture Notes in Mechanical Engineering . Springer Nature, Singapore. ISBN 978-981-19-9508-8

Maleque, Md Abdul and Ahmad Azhar, Ahmad Zahirani and Sarifuddin, Norshahida and Syed Shaharuddin, Sharifah Imihezri and Mohd Ali, Afifah and Abd Halim, Nor Farah Huda, eds. (2023) Proceeding of 5th International Conference on Advances in Manufacturing and Materials Engineering. Lecture Notes in Mechanical Engineering (1). Springer, Singapore. ISBN 978-981-19-9508-8

Book Chapter

Haji Hassan, Masjuki and M., Gulzar and M. A., Kalam and N. W. M., Zulkifli and Maleque, Md. Abdul and M. S. S., Malik and A., Arslan (2023) Engine tribology: enhancing energy efficiency for cleaner environment. In: Diamond-Like Carbon Coatings: Technologies and Applications. CRC Press, Boca Raton, pp. 221-254.

Masjuki, H.H. and Gulzar, M. and Kalam, M. A. and M. Zulkifli, N. W. and Maleque, Md. Abdul (2023) Engine tribology enhancing energy efficiency for cleaner environment. In: Diamond-Like Carbon Coatings - Technologies and Applications. CRC Press, Tailor & Francies Group LLC, pp. 221-254. ISBN 9781032038575

Nordin, N. M. and Anuar, Hazleen and Ali, Fathilah and Buys, Y. F. (2023) Properties of polylactic acid biocomposite foamed treated via supercritical carbon dioxide. In: Springer Proceedings in Materials. Springer Proceedings in Materials, 24 (1). Springer, Singapore, pp. 279-286. ISBN 978-981-99-2014-3

Sabaruddin, Fatimah Atiyah and Chuan, Li Lee and Seng, Hua Lee and Ghani, Aizat and Samat, Noorasikin (2023) Flame retardancy evaluation of polymer composite-reinforced ceramic nanofillers. In: Synthetic and Natural Nanofillers in Polymer Composites: Properties and Applications. Woodhead Publishing Series in Composites Science and Engineering . Elsevier, UK, pp. 89-126. ISBN 978-0-443-19053-7

Tahreen, Amina and Adli, Sarah Amalina and Anuar, Hazleen and Jamaluddin, Jamarosliza and Mohan, Raja and Ali, Fathilah (2023) Algae materials for food and food packaging. In: Algae Materials: Applications Benefitting Health. Developments in Applied Microbiology and Biotechnology . Elsevier, United Kingdom, pp. 85-91. ISBN 978-0-443-18816-9

Proceeding Paper

Abd Halim, Nor Farah Huda and Dahnel, Aishah Najiah and Gunasegaran, Umma Sankar and Lim, Joo Eng and Mohamad Amiruddin, M. S. and Tomadi, Siti Haryani (2023) Influence of cutting edge radius (CER) and width of cut (WOC) on tool wear in milling SUS 316 stainless steel. In: Proceeding of 5th International Conference on Advances in Manufacturing and Materials Engineering, 9—10 August, 2022, Kuala Lumpur.

Abd Kadir, Nur Amanina and Mohd Zaki, Hafizah Hanim and Abd Samad, Ikhmal Hazrith and Mohd Daud, Farah Diana and Sarifuddin, Norshahida and Abdullah, Jamaluddin (2023) Tailoring compressive properties of sintered porous NiTi Alloy for biomedical implant through pore forming agent. In: 11th International Symposium on Applied Engineering and Sciences (SAES2023), 20th - 21st November 2023, Serdang, Selangor, Malaysia.

Abd Rahman, Nurul Amirah and Anuar, Hazleen and Ali, Fathilah and Suhr, Jonghwan (2023) Mechanical and thermal properties of 3D printed polylactic acid reinforced alkaline lignin with epoxidized palm oil bio-composites. In: 5th International Conference on Advances in Manufacturing and Materials Engineering, 9th - 10th August 2022, Kuala Lumpur, Malaysia.

Abu Hassan, Nur Hudawiyah and Jami, Mohammed Saedi and Mohd Daud, Farah Diana and Jamal, Nur Ayuni and Nordin, Norhuda Hidayah (2023) Enhancement of fenton process using high entropy alloy powder as catalyst. In: 5th International Conference on Advances in Manufacturing and Materials Engineering (ICAMME2022), 9th - 10th August 2022, Kuala Lumpur.

Al Hazza, Muataz Hazza Faizi and Zahari, Syahir and Bourini, Islam and Ismail, Md Yusof and Ali, Mohammad Yeakub and Adesta, Erry Y. T. (2023) Lean manufacturing and six sigma principles implementation in the industry: case study. In: 5th International Conference on Advances in Manufacturing and Materials Engineering (ICAMME2022), 9th - 10th August 2022, Online Conference.

Alawbali, Rakan Hatem Abbas and Mohamed Ariff, Tasnim Firdaus (2023) Enhancing the tool life of aluminium oxide (Al2O3) inserts using hybrid microwave energy in dry machining of high strength steel (KRUPP 6582). In: 5th International Conference on Advances in Manufacturing and Materials Engineering, 9th - 10th August 2022, Kuala Lumpur, Malaysia.

Amir, Adibah and Ahmad, Zuraida and Toha @ Tohara, Siti Fauziah and Hasbullah, Nurul Fadzlin and Mel, Maizirwan and Haji Hassan, Masjuki and Ismail, Md Yusof (2023) Enhancing engineering ethics understanding: impact of the teaching and learning approaches and curriculum. In: 6th International Conference on Engineering Professional Ethics and Education 2023 (ICEPEE'23), 15th - 16th August 2023, Virtual Conference.

Arief, Rudi Kurniawan and Sukindar, Nor Aiman and Hilmy, Irfan and Adesta, Erry Yulian Triblas (2023) Analysis of the adjusting bolts system’s contribution to levelling error of the heated bed in FDM 3D printer. In: Proceeding of 5th International Conference on Advances in Manufacturing and Materials Engineering, 9-10 August 2022, Kuala Lumpur.

Ariff, Tasnim Firdaus and Zakaria, Azriena Nathasa (2023) Mechanical and structural properties of epoxy bio-composite using fish bones as bio-filler. In: 5th International Conference on Advances in Manufacturing and Materials Engineering, ICAMME 2022, 9-10 August 2022, KualaLumpur.

Asmadi, M. Solleh and Md. Kasmani, Ruhaila and Siri, Zailan and Saleh, Habibis and Mt Aznam, Suazlan (2023) Relevance of various cavity aspect ratios to the thermal behavior of natural convection heat transfer for water-based hybrid nanofluid within a U-shaped enclosure. In: 14. International Conference on Computational Heat and Mass Transfer, 4-8 September 2023, Düsseldorf, Germany. (Unpublished)

Azahari, Nur Najma Athirah and Anuar, Hazleen and Hassan, Azman and Jawaid, Mohammed and Halim, Zahurin and Samsudin, Sani Amril (2023) Mechanical properties of magnesium hydroxide/halloysite nanotubes reinforced polyamide 11 nanocomposites. In: 5th International Conference on Advances in Manufacturing and Materials Engineering, 9th - 10th August 2022, Kuala Lumpur, Malaysia.

Azhari, Azmir and Idriss, A. N. M. and Maleque, Md. Abdul (2023) Comparative study on performance characteristics of modified alloy steels by TIG and water jet peening processes. In: Proceeding of 5th International Conference on Advances in Manufacturing and Materials Engineering ICAMME 2022, 9—10 August, Kuala Lumpur, Malaysia, 9-10 August, 2022, Kuala Lumpur, Malaysia.

Dahnel, Aishah Najiah and Faris, Muhammad Firas and Azman, Mohamad Anas Fikri (2023) Hardness and microstructural analysis of recycled aluminum 7075. In: 11th International Symposium on Applied Engineering and Sciences (SAES2023), 20th - 21st November 2023, Serdang, Selangor, Malaysia.

El-Sayed, Mohamed Hassan Attia and Ariff, Tasnim Firdaus and Noor Awalludin, Muhammad Mukhtar (2023) Development of framework for the management, handling system and maintenance in using hydrosurgery at hospitals. In: WJTA Conference and Expo 2023, 31 October - 1 November 2023, New Orleans, Louisiana.

Fathi, Farhah Rusyda and Amir, Dzilal and Nasaruddin, Ricca Rahman and Abd Halim, Nor Farah Huda (2023) Investigating the synthesis of activated carbon from carbon chips of carbon fibre reinforced polymer for the removal of methylene blue. In: Proceeding of 5th International Conference on Advances in Manufacturing and Materials Engineering (ICAMME2022), 9–10 August 2022, Kuala Lumpur, Malaysia..

Haszerin, Muhammad Na'iim and A. Raof, Natasha and M Zamre, M K A and Dahnel, Aishah Najiah and Mokhtar, Suhaily and Muhamad Khairussaleh, Nor Khairusshima (2023) Machining performance of carbide insert in turning aluminum alloy 7075-T651. In: International Conference on Manufacturing Engineering Technology (ICONMET 2021), 14-15 July 2021, Asenia Resort, Langkawi, Malaysia.

Ismail, Ahmad Abdul Mun'im and Rosdin, Muhammad Rafiq Haikal and Rozhan, Alya Naili and Purwanto, Hadi and Abdul Hamid, Abd. Malek and Md Din, Muhamad Faiz and Mohd Yasin, Mohd Fairus and Ani, Mohd. Hanafi (2023) Blast furnace slag cement clinker production using limestone-hot blast furnace slag mixture. In: 5th International Conference on Advances in Manufacturing and Materials Engineering (ICAMME2022), 9th - 10th August 2022, Kuala Lumpur, Malaysia.

Ismail, Izham Izzat and Mohamad Jamil, Nur Arifah and Mohamad Anuar, Mai Nurul Fareesya and Azami, Muhammad Hanafi and Nordin, Norhuda Hidayah (2023) Investigation of hybrid rocket motor regression rate doped with high entropy metallic additives. In: AIAA SciTech Forum, 23rd - 27th January 2023, National Harbor, MD, USA & Online.

Jamadon, Nashrah Hani and Muhamad Rasid, Nurul Izzati and Ahmad, Mohd Azwan and Lutfi, Maisarah and Syed Abu Bakar, Syarifah Adzila and Jamal, Nur Ayuni and Muhamad, Norhamidi (2023) The effect of graphene addition on the microstructure and properties of graphene/copper composites for sustainable energy materials. In: 4th International Conference on Green Environmental Engineering and Technology (ICONGEET 2022), 17th - 18th November 2022, Seoul, South Korea.

Juhar, M Z F and Mohamad, M Sofwan and Illias, Suhaimi and Amin, N A M and Hussain, S and Ani, Mohd Hanafi (2023) Maximum spreading diameter of a water droplet after impact on a hot surface beyond Leidenfrost temperature. In: 8th International Conference on Applications and Design in Mechanical Engineering (ICADME 2023), 4th - 5th September 2023, Kuala Lumpur, Malaysia.

Kaderi, Akbar and Syed Abu Bakar, Syed Noh and Ani, Mohd Hanafi and Illias, Suhaimi and Osman, M. S (2023) Metal dusting led failure in a high-temperature condenser. In: 7th International Corrosion Prevention Symposium for Research Scholars, CORSYM 2021, 17 November 2021, Virtual.

Kusuadi, Nur Izzah Nazurah and Jamal, Nur Ayuni and Ahmad Nor, Yusilawati (2023) A short review on diamond reinforced aluminium composites. In: 5th International Conference on Advances in Manufacturing and Materials Engineering (ICAMME), 13-14 August 2022, Kuala Lumpur.

Mahmud, Mudrikah Sofia and Aadnan, Aina Fadzleen and Mohd Daud, Farah Diana and Sarifuddin, Norshahida and Mohd Zaki, Hafizah Hanim and Nordin, Norhuda Hidayah and Mohammad, Nur Farahiyah (2023) Cement-based with partial replacement of nano-silica for improvement in compressive strength. In: 5th International Conference on Advances in Manufacturing and Materials Engineering (ICAMME2022), 9th - 10th August 2022, Kuala Lumpur, Malaysia.

Maleque, Md. Abdul and Haji Hassan, Masjuki and Yusuf Cetin, Safa and Efeoglu, Ihsan and Rahman, Md Mustafizur (2023) Wear and corrosion of ceramic coated metallic surface in presence of biodiesel. In: Proceeding of 5th International Conference on Advances in Manufacturing and Materials Engineering ICAMME 2022, 9—10 August, Kuala Lumpur, Malaysia, 9-10 August, 2022, Kuala Lumpur, Malaysia.

Maleque, Md. Abdul and Masjuki, H. H. and Low, K. O. and Ali, Mohammad Yeakub (2023) Sustainable eSiC reinforced composite materials – synthetization and characterization. In: 8th Brunei International Conference on Engineering and Technology 2021 (BICET2021), 8-10 November 2021, Universiti Teknologi Brunei (Virtual).

Manshor, Mohd Romainor and Kamarulzaman, Amjad Fakhri and Anuar, Hazleen and Toha @ Tohara, Siti Fauziah and Ali, Fathilah and Sukindar, Nor Aiman and Suhr, Jonghwan and Haris, Nursyam Dzuha (2023) Optimizing tensile strength of PLA-Lignin Bio-composites using machine learning approaches. In: 5th International Conference on Advances in Manufacturing and Materials Engineering, 9th - 10th August 2022, Kuala Lumpur, Malaysia.

Md Azhar, Muhammad Afif and Sukindar, Nor Aiman and Ani, Mohd Hanafi and Anuar, Hazleen and Kamaruddin, Shafie and Syed Shaharuddin, Sharifah Imihezri and Mustafa, Mohd Yusry and Adesta, Erry Yulian Triblas and Arief, Rudi Kurniawan and Sulaiman, Mohd Hafis (2023) Review on fused deposition modelling extruder types with their specialities in filament extrusion process. In: 5th International Conference on Advances in Manufacturing and Materials Engineering, ICAMME 2022, 9-10 August 2022, Kuala Lumpur.

Md Azhar, Muhammad Afif and Sukindar, Nor Aiman and Ani, Mohd. Hanafi and Anuar, Hazleen and Kamaruddin, Shafie and Syed Shaharuddin, Sharifah Imihezri and Mustafa, Mohd Yusry and Adesta, Erry Yulian Triblas and Arief, Rudi Kurniawan and Sulaiman, Mohd Hafis (2023) Review on fused deposition modelling extruder types with their specialities in filament extrusion process. In: 5th International Conference on Advances in Manufacturing and Materials Engineering (ICAMME2022), 9th - 10th August 2022, Kuala Lumpur, Malaysia.

Mohamed Ariff, Tasnim Firdaus and Sayadek, Mohd Shahril (2023) Wear analysis of titanium carbonitride in machining high strength steel (KRUPP 6582) using used palm oil as cutting fluid. In: 1st International Conference on Manufacturing Engineering Technology (IConMET 2021), Langkawi Island, Malaysia.

Mohd Nordin, Nurfarahin and Anuar, Hazleen and Buys, Yose Fachmi (2023) Effect of supercritical carbon dioxide pressure on foamed PolyLactic Acid biocomposite. In: 5th International Conference on Advances in Manufacturing and Materials Engineering, 9th - 10th August 2022, Kuala Lumpur, Malaysia.

Mohd Zaki, Hafizah Hanim and Abd Kadir, Nur Amanina and Jamal, Nur Ayuni and Md. Abdul, Maleque and Mohd Daud, Farah Diana and Sarifuddin, Norshahida and Abdullah, Jamaluddin (2023) Effect of pore forming agent on phase transformation behavior of porous NiTi shape memory alloy. In: Proceeding of 5th International Conference on Advances in Manufacturing and Materials Engineering ICAMME 2022, 9—10 August, Kuala Lumpur, Malaysia, 9-10 August 2022, Kuala Lumpur, Malaysia.

Mohd Zaki, Syazwani and Musa, Sharan (2023) Investigation of microgels and double crosslinked microgels containing 2-carboxyethyl acrylate (CEA). In: 5th International Conference on Advances in Manufacturing and Materials Engineering (ICAMME2022), 9th - 10th August 2022, Kuala Lumpur, Malaysia.

Naping, Rosmia and Maleque, Md. Abdul and Sarifuddin, Norshahida and Hassan, Masjuki and Bello, Kamilu Adeyemi (2023) Hybrid coating of titanium alloys via liquid additive manufacturing method: a review of recent advances. In: 6th International Conference on Mechanical, Automotive and Aerospace Engineering 2023 (ICMAAE '23), Kuala Lumpur, Malaysia. (Unpublished)

Nasrudin, Raimi Fariz and Samat, Noorasikin and Engliman, Nurul Sakinah (2023) Characterization of poly(vinyl) alcohol based aerogel assisted by cellulose nanocrystal. In: 5th International Conference on Advances in Manufacturing and Materials Engineering (ICAMME2022), IIUM Gombak.

Nor Hairin, Assayidatul Laila and Jailani, Muhammad Haziq Hakmal and Megat Hasnan, Megat Muhammad Ikhsan (2023) Thermoelectric properties of B-FeSi2 thermoelectric module utilizing cast-iron scrap chips. In: 5th International Conference on Advances in Manufacturing and Materials Engineering (ICAMME2022), 9th - 10th August 2022, Kuala Lumpur, Malaysia.

Nor Hairin, Assayidatul Laila and Mohd Yusaini, Nurul Batrisyia and Othman, Raihan and Mohd Salled, Mohd Faiz (2023) Synthesis and characterization of intrinsic CuO-ZnO semiconductor for thermoelectric cell using electrodeposition method. In: 11th International Symposium on Applied Engineering and Sciences (SAES2023), 20th - 21st November 2023, Serdang, Selangor, Malaysia.

Parveez, Bisma and Jamal, Nur Ayuni and Mohamad Kadri, Syazwan and Ahmad Azhar, Ahmad Zahirani and Mohd Zaki, Hafizah Hanim (2023) Microstructure and mechanical properties of porous aluminium composites reinforced with diamond particles. In: 5th International Conference on Advances in Manufacturing and Materials Engineering (ICAMME), 13-14 August 2022, Kuala Lumpur.

Polat, Muhammed Alperen and Gülten, Gökhan and Totik, Ya¸sar and Maleque, Md. Abdul and Haji Hassan, Masjuki and Yusuf Çetin, Safa and Efeoglu, Ihsan (2023) Synthesis and characterization of Ta/TaN coatings with CFUBMS-HiPIMS technology. In: Proceeding of 5th International Conference on Advances in Manufacturing and Materials Engineering, ICAMME 2022, 9—10 August, Kuala Lumpur, Malaysia, 9—10 August, 2022, Kuala Lumpur, Malaysia.

Rosdin, Muhammad Rafiq Haikal and Ismail, Ahmad Abdul Mun'im and Abdul Hamid, Abd. Malek and Purwanto, Hadi and Illias, Suhaimi and Syed Abu Bakar, Syed Noh and Ani, Mohd. Hanafi (2023) Effect of oxygen gas exposure on T91 alloy at high temperature oxidation of steam reformer. In: 5th International Conference on Advances in Manufacturing and Materials Engineering (ICAMME2022), 9th - 10th August 2022, Kuala Lumpur, Malaysia.

Rosli, Muhammad Izzat Amin and A. Raof, Natasha and Dahnel, Aishah Najiah and Mokhtar, Suhaily and Muhamad Khairussaleh, Nor Khairusshima (2023) Investigation of chip formation during turning of aluminum alloys 7075-T651 in dry and chilled air condition. In: 5th International Conference on Advances in Manufacturing and Materials Engineering, 9-10 August 2022, Kulliyyah of Engineering, IIUM.

Septiyana, Diah and Abd. Rahman, Mohamed and Mohamed Ariff, Tasnim Firdaus and Sukindar, Nor Aiman and Adesta, Erry Yulian Triblas (2023) ANFIS domestic water consumption model before and during Covid19 pandemic in Tangerang Indonesia. In: 5th International Conference on Advances in Manufacturing and Materials Engineering, ICAMME 2022, 9-10 August 2022, Kuala Lumpur.

Serati, Flora and Mohd Zaki, Syazwani and Zulkifli, Ahmad Akid (2023) Strategies for improving photothermal conversion capabilities in hydrogel polymer materials for solar vapor generation. In: IIUM Engineering Congress 2023 (IEC ’23), 15 – 16 August 2023, IIUM.

Sugumaran, Luvindran and Mohd Zubir, Mohd Nashrul and Kazi, Salim Newaz and Tuan Zahari, Tuan Zaharinie and Mt Aznam, Suazlan and Mohd Halil, Aiman (2023) Experimental investigation of nucleate pool boiling heat transfer characteristics on modified copper surface via laser-structured microstructures. In: 6th International Conference on Clean Energy and Technology 2023, 7-8 June 2023, Bayview Hotel Penang, Malaysia. (Unpublished)

Sukindar, Nor Aiman and Idrus Saidi, Haidah Farzana Isma and Kamaruddin, Shafie and Yang, Chuan Choong and Syed Shaharuddin, Sharifah Imihezri and Morni, Murhamdilah (2023) Design simulation and development of prototype filling nozzle in food industry. In: 8th Brunei International Conference on Engineering and Technology 2021, 08 – 10 November 2021, Virtual.

Tomadi, Siti Haryani and Abd Halim, Nor Farah Huda and H., Mas Ayu and R., Daud and Zakaria, Muhammad Ariff (2023) Analysis and optimum machining parameters on surface roughness and material removal rate for titanium alloy in milling machining with MQL. In: Proceeding of 5th International Conference on Advances in Manufacturing and Materials Engineering, 9-10 August, 2022, Kuala Lumpur.

Zulkifli, Ahmad Akid and Sa’adon, Muhammad Hazwan and Serati, Flora and Mohd Zaki, Syazwani (2023) Development of PVA-Chitosan/PANi hydrogels for environmental applications. In: 3rd International Conference on Universal Wellbeing (ICUW) 2022, Online Conference.

Monograph

Maleque, Md. Abdul and Mat Jusoh, Ahmad Haziq and Salehudin, Nabilah Farhana and Yee, Sen Tat and Din, Mohd Idrus and Adenan, Rashimah and Abdullah, Mohamad Akhir and Mat Zain, Mohd Hafizy and Lim, Sooi San and Chum, Pak Kuan and Ahmad Salman, Shafiq Wazzan and Yazid, Zurawati and Mat Isa, Mohd Azlan and Mohd Saleh, Mohd Khairul Annuar and Chua, Seok Cheng and Idris, Mohd Nazri and Karam Singh, Salvinder Singh and Lee, Hooi Lan and Tan, Chin Guan and Pang, See How (2023) Stainless steels for general purposes – Part 2: Corrosion-resistant semi-finished products, bars, rods and sections (First revision) (ISO 16143-2:2004, MOD). Policy Paper. Department of Standard Malaysia (DSM), Malaysia.