Items where Division is "Kulliyyah of Engineering > Department of Manufacturing and Materials Engineering" and Year is 2021

A

Abd Nasser, Mohammed Alawi and Ismail, Yusof and Al-Ameri, Salem Mgammal and Sorooshian, Shahryar (2021) Framing an alternative mean to address electricity disruptions. In: Taras Shevchenko 6th International Congress on Social Sciences, Kyiv, Ukraine.

Abd Rahman, Nurul Amirah and Anuar, Hazleen and Ali, Fathilah and Suhr, Jonghwan (2021) Poly(Lactic) acid reinforced with alkaline Lignin Biocomposites prepared by Thermal Extrusion for sustainable 3D printing process. In: 1st International Conference on Material Processing and Technology 2021 (ICMProTech), 14-15 July 2021, Perlis, Malaysia (Virtual).

Abd Rahman, Nurul Amirah and Anuar, Hazleen and Mohd. Nordin, Nurfarahin and Mohd Asri, Syazeven Effatin Azma and Ali, Fathilah and Suhr, Jonghwan (2021) Mechanical and thermal properties of polylactic acid filled lignin powder biocomposite filaments with epoxidized palm oil for sustainable 3d printing application. Perintis eJournal, 11 (1). pp. 23-39. E-ISSN 2232-0725

Ahmad Shahrim, Nur'Aishah and Ahmad, Zuraida and Wong Azman, Amelia and Buys, Yose Fachmi and Sarifuddin, Norshahida (2021) Mechanisms for doped PEDOT:PSS electrical conductivity improvement. Materials Advances, 2 (22). pp. 7118-7138. ISSN 2633-5409

Al Amin, Md and Abdul-Rani, Ahmad Majdi and Danish, Mohd and Rubaiee, Saeed and Mahfouz, Abdullah and Thompson, Harvey M. and Ali, Sadaqat and Unune, Deepak Rajendra and Sulaiman, Mohd Hafis (2021) Investigation of coatings, corrosion and wear characteristics of machined biomaterials through hydroxyapatite mixed-EDM process: a review. Materials, 14 (13).

Amir, Adibah and Ismail, Md Yusof (2021) Relationship between unethical students and supportive education systems during online learning mode. In: 4th International Conference on Engineering Professional Ethics and Education 2021 (ICEPEE'21), 22-23 June 2021, Kuala Lumpur, Malaysia.

Anuar, Hazleen and Abd Rashid, Siti Munirah Salimah and Mohd Nordin, Nurfarahin and Ali, Fathilah and Buys, Yose Fachmi and Thomas, Sabu and Mohd Nasir, Nur Aimi and Mohd Asri, Syazeven Effatin Azma (2021) Potential of fabrication of durian skin fiber biocomposites for food packaging application through the electricity impact analysis. IIUM Engineering Journal, 22 (2). pp. 294-305. ISSN 1511-788X E-ISSN 2289-7860

Ayob, Nur Idayu and Inagaki, Takeshi J. and Daimon, Hiroshi and Takeda, Sakura Nishino (2021) Empirical potential profile model for subbands with unusual energy separation in Si(111) p-type inversion layer. Japanese Journal of Applied Physics, 60. ISSN 0021-4922 E-ISSN 1347-4065

Aziz, Shujahadeen and Ali, Fathilah and Anuar, Hazleen and Ahamad, Tansir and Kareem, Wrya O. and Brza, Mohamad A. and Kadir, MFZ and Abu Ali, Ola A and Saleh, Dalia and Asnawi, ASFM and Hadi, Jihad M. and Alshehri, Said M (2021) Structural and electrochemical studies of proton conducting biopolymer blend electrolytes based on MC:Dextran for EDLC device application with high energy density. Alexandria Engineering Journal. pp. 1-13. ISSN 1110-0168 E-ISSN 2090-2670 (In Press)

B

Baskaran, Thivya and Mohammad, Nur Farahiyah and Md Saleh, Siti Shuhadah and Mohd Nasir, Nashrul Fazli and Mohd Daud, Farah Diana (2021) Synthesis methods of doped hydroxyapatite: a brief review. In: International Conference on Biomedical Engineering (ICoBE 2021), 14-15 September 2021, UniMAP, Malaysia (Virtual).

Brza, Mohamad A. and Aziz, Shujahadeen and Anuar, Hazleen and Ali, Fathilah and Abdulwahid, Rebar T. and Hadi, Jihad M. (2021) Electrochemical impedance spectroscopy as a novel approach to investigate the influence of metal complexes on electrical properties of poly (vinyl alcohol)(PVA) composites. International Journal of Electrochemical Science, 16. pp. 1-21. ISSN 1452-3981

Brza, Mohamad A. and Aziz, Shujahadeen and Anuar, Hazleen and Alshehri, Saad M and Ali, Fathilah and Ahamad, Tansir and Hadi, Jihad M. (2021) Characteristics of a Plasticized PVA-Based Polymer Electrolyte Membrane and H+ Conductor for an Electrical Double-Layer Capacitor: Structural, Morphological, and Ion Transport Properties. Membranes, 11 (4). p. 296. ISSN 2077-0375

C

Chang, Hsueh-Hsien and Yang, Chuan Choong and Lee, Wei-Jen (2021) Fault location identification in power transmission networks: using novel nonintrusive fault-monitoring systems. IEEE Industry Applications Magazine, 27 (2). pp. 76-89. ISSN 2158-4893 E-ISSN 2158-4907

F

Fuhaid, Mutlag S. and Murali, R.V. and Maleque, Md Abdul and Abd Rahman, Mohamed (2021) Reuse of marble wastes as reinforcement phase in LM6 aluminium matrix composites for automotive applications. International Journal of Powertrains, 10 (2). pp. 188-203. ISSN 1742-4267 E-ISSN 1742-4275

Fuhaid, Mutlag Sh. and Maleque, Md. Abdul and Murali, R V and Rahaman, M. A. Rahaman (2021) Natural and industrial origin reinforced LM6 aluminum composite materials – A comparative study. In: Recent Innovations in Science & Technology (RIST 2021), 19-20 June 2021, Virtual platform (India). (Unpublished)

Fuhaid, Mutlag Sh. and Maleque, Md. Abdul and Venkat, Murali and Abd. Rahman, Mohamed (2021) Natural and industrial origin reinforced LM6 aluminum matrix composite materials – a comparative study. In: International Conference on Recent Innovations in Science and Technology (RIST 2021), 19-20 June 2021, Virtual. (In Press)

Fuhaid, Mutlag Shafi and Murali, R V and Maleque, Md. Abdul and Krishnan, P K and Abd. Rahman, Mohamed (2021) Synthesis and characterisation of aluminium composite with graphene oxide reinforcement. IOP Conference Series: Materials Science and Engineering, 1057. pp. 1-12.

G

Ghane, Neda and Avakh Darestani, Soroush and Ismail, Md Yusof and Azam, Moradi Tadi (2021) Developing fuzzy tool capability measurement system analysis. Journal of Optimization in Industrial Engineering, 14 (2). pp. 79-92. ISSN 2251-9904 E-ISSN 2423-3935

H

Hujailan, Faleh F.F. and Maleque, Md. Abdul and Rahman, M. M. and Bello, K. A. (2021) Sustainable energy simulation for water heating system. In: 2021 Sustainable Engineering and Industrial Technology Conference, Nigeria. (In Press)

Hujailan, Faleh F.F. and Maleque, Md. Abdul and Rahman, Md. Mustafizur (2021) Comparative study on performance of flat plate and evacuated tube collectors solar water heater system. In: 5th International Conference on Mechanical, Automotive and Aerospace Engineering 2021 (ICMAAE'21), Kuala Lumpur, Malaysia,, 22 – 23rd June, KOE, IIUM (virtual). (Unpublished)

I

Illias, Suhaimi and Hussain, Suhaila and Abdul Rahim, Yuzairi and Baharudin, Mohamad Ezral and Ismail, Khairul Azwan and Ani, Mohd Hanafi and UNSPECIFIED (2021) Prediction of maximum spreading time of water droplet during impact onto hot surface beyond the Leidenfrost temperature. Case Studies in Thermal Engineering, 28. pp. 1-19.

Illias, Suhaimi and Hussain, Suhaila and Ishak, Mohamad Shaiful Ashrul and Mustaffa, Mohammad Taufiq and Ismail, Khairul Azwan and Selamat, Salsuwanda and Ani, Mohd Hanafi (2021) Investigation on water droplet receding height impacting onto heated carbon surface. Journal of Mechanical Engineering Research and Developments, 44 (6). pp. 335-341. ISSN 1024-1752

Illias, Suhaimi and Hussain, Suhaila and Rosman, N. A and Baharuddin, M.E and Shaiful, A.I.M. and Ismail, Khairul Azwan and Mohd Hanafi, Ani and UNSPECIFIED (2021) Critical heat flux and Leidenfrost temperature on Electrical Discharge Machining (EDM) - constructed hemispherical surface. Case Studies in Thermal Engineering, 27. pp. 1-8. ISSN 2214-157X

Ismail, Izham Izzat and Asmun, Siti Nurfaiqah and Abdullah, Nur Azam and Azami, Muhammad Hanafi and Nordin, Norhuda Hidayah (2021) Numerical analyses for regression rate solid fuel doped with high entropy alloys in hybrid rocket motor. In: International Seminar on Aeronautics and Energy 2021 (ISAE 2021), 28 August 2021, Johor Bahru. (Unpublished)

J

Jia, Wei Lee and Syed Bakar, Sharifah Shahnaz and Ahmad Zaidi, Nur Hidayah and Yahud, Shuhaida and Samat, Noorasikin (2021) Effect of carbon nanotube loading on electrical properties of electrospun polyvinylidene fluoride (PVDF) fiber. In: 1st International Conference on Green Materials, Processing and Characterization 2021 (ICOGMPAC 2021), 12 October 2021, Perlis, Malaysia (Virtual).

K

Kamaruddin, Shafie and Rosdi, Mohamad Naqiuddin and Sukindar, Nor Aiman (2021) Optimization of drilling path using the bees algorithm. Manufacturing Technology, 21 (6). pp. 1-7. ISSN 1213–2489 E-ISSN 2787–9402 (In Press)

M

Mahmood, Mahmood Hameed and Maleque, Md. Abdul (2021) Effective parameter of nano‑CuO coating on CO gas‑sensing performance and heat transfer efficiency. Arabian Journal for Science and Engineering, 46. pp. 6557-6566. ISSN 2193-567X E-ISSN 2191-4281

Maleque, Md. Abdul (2021) Spin-orbit coupling effect on the electronic structure of Sr2FeHfO6 alloy for spintronics device application. Journal of Magnetism and Magnetic Materials, 518. pp. 1-7. ISSN 0304-8853

Maleque, Md. Abdul and B, Merabet and Ozkendir, Osman Murat and A. S., Hassanien (2021) Optical and structural characterization of (Mn, Fe) co-doped lead chalcogenides for optoelectronics applications. Journal of Optoelectronics and Advanced Materials, 23 (11-12). pp. 564-573. ISSN 1454-4164 E-ISSN 1841 - 7132

Maleque, Md. Abdul and Hassan, Masjuki and K.O., Low and Ali, Mohammad Yeakub (2021) Sustainable eSiC reinforced composite materials – synthetization and characterization. In: 8th Brunei International Conference on Engineering and Technology 2021 (BICET2021), 8-10 November, Universiti Teknologi Brunei ( Virtual ). (Unpublished)

Maleque, Md. Abdul and Urmi, Wajiha Tasnim and Rahman, Md Mustafizur and Kadirgama, Kumaran and D., Ramasamy (2021) An overview on synthesis, stability, opportunities and challenges of nanofluids. Materials Today: Proceedings, 41. pp. 30-37. E-ISSN 2214-7853

Md Idriss, A. N. and Maleque, Md. Abdul and Afiq, A (2021) The effect of working distances on the formation of TiC composite surface hardening using TIG melting technique. In: 5th International Conference on Mechanical, Automotive and Aerospace Engineering 2021 (ICMAAE'21), 22 - 23 June 2021, Virtual. (Unpublished)

Md Idriss, Ahmed Nazrin and Kasolang, Salmiah and Md. Abdul, Maleque and Md Nasir, Ramdziah (2021) An overview on the importance of surface modification by TIG and lasers incorporating carbides and their relations to wear behaviours. Jurnal Tribologi, 29. pp. 96-116. ISSN 2289-7232

Md. Abdul, Maleque (2021) High impact journal writing and publication. In: Workshop on High Impact Journal Writing and Publication, 11 August 2021, Virtual. (Unpublished)

Meera Mydin, Nur Munirah and Dahnel, Aishah Najiah and A. Raof, Natasha and Muhamad Khairussaleh, Nor Khairusshima and Mokhtar, Suhaily (2021) The effect of chilled air on burr formation when drilling aluminium alloy in manufacturing industry. International Journal of Progressive Sciences and Technologies (IJPSAT), 28 (1). pp. 437-445. ISSN 2509-0119

Mohammad, Nur Farahiyah and Koo, Li Mei and Mohd Riza, Mohd Roslan and Md Saleh, Siti Shuhadah and Mohd Daud, Farah Diana (2021) Synthesis and characterization of nanoporous biphasic calcium phosphate. In: International Conference on Biomedical Engineering (ICoBE 2021), 14-15 September 2021, UniMAP, Malaysia (Virtual).

Mohd Abid, Mohd Asyadi Azam and Safie, Nur Ezyanie and Abdul Aziz, Mohd Fareezuan and Raja Seman, Raja Noor Amalina and Suhaili, Muhamad Rafi and Abdul Latiff, Anas and Arith, Faiz and Mohamed Kassim, Anuar and Ani, Mohd Hanafi (2021) Structural characterization and electrochemical performance of nitrogen doped graphene supercapacitor electrode fabricated by hydrothermal method. International Journal of Nanoelectronics and Materials, 14 (2). pp. 127-136. ISSN 1985-5761 E-ISSN 2232-1535

Mohd Daud, Farah Diana and Kosen, Nur Asyikin and Mahmud, Mudrikah Sofia and Sarifuddin, Norshahida and Mohd Zaki, Hafizah Hanim (2021) Preparation of CaO-SiO2 adsorbent for potential CO2 capture via dry mixing method. Materials Science Forum, 1025. pp. 343-348. ISSN 0255-5476 E-ISSN 1662-9752

Mohd Daud, Farah Diana and Mohamad Azir, Muhammad Mirza and Mahmud, Mudrikah Sofia and Sarifuddin, Norshahida and Mohd Zaki, Hafizah Hanim (2021) Preparatiion of CaO-based pellet using rice husk ash via granulation method for potential CO2 capture. IIUM Engineering Journal, 22 (1). ISSN 1511-788X E-ISSN 2289-7860

Mohd Zaki, Syazwani (2021) The journey of untold sacrifications. In: PhD: the amazing journey. Universiti Malaysia Pahang, Pahang, pp. 103-116. ISBN 978-967-2226-90-1

Mustafa, Aisyah Madihah and Ahd Suhaimi, Ahmad Basyir and Shahruddin, Najlah Sakinah and Abd Halim, Nor Farah Huda (2021) An experimental investigation on surface quality of CFRP after milling in cutting fluid environment. In: 7th International Conference on Applications and Design in Mechanical Engineering (ICADME 2021), 23 August 2021, Virtual.

N

Nordin, Norhuda Hidayah and Sulaiman, Mohd Hafis and Leong, Zhaoyuan (2021) Nano-indentation and indentation size effect on different phases in Lamellar structure high entropy alloy. In: Green Tribology. CRC PRESS, pp. 177-186. ISBN 978-0-367-68860-8

O

Odiwo, H. and Bello, K. A and Abdulwahab, M and Adebisi, A. A. and Maleque, Md. Abdul (2021) Properties of aluminium/electroless ni-coated sic composites - a review. FUDMA Journal of Sciences, 5 (1). pp. 381-394. ISSN 2645-2944 E-ISSN 2616-1370

P

Parveez, Bisma and Jamal, Nur Ayuni and Md. Abdul, Maleque and Yusof, Farazila and Jamadon, Nashrah Hani and Syed Abu Bakar, Sharifah Adzila (2021) Review on advances in porous Al composites and the possible way forward. Journal of Materials Research and Technology, 14. pp. 2017-2038. ISSN 2238-7854 E-ISSN 2214-0697

Parveez, Bisma and Maleque, Md. Abdul and Jamal, Nur Ayuni Jamal (2021) Influence of agro-based reinforcements on the properties of aluminum matrix composites: a systematic review. Journal of Materials Science, 56. pp. 16195-16222. ISSN 0022-2461 E-ISSN 1573-4803

Permata Sari, Dian and Jaswir, Irwandi and Haji Che Daud, Mohd Radzi (2021) Factors affecting the successful implementation of MS1500 by Malaysian halal food industry. International Journal of Halal Research, 3 (2). pp. 102-112. ISSN 2721-7868

Permata Sari, Dian and Jaswir, Irwandi and Haji Che Daud, Mohd Radzi (2021) Implementation and impact of a halal food standard: an empirical study of Malaysia. Journal of Islamic Monetary Economic and Finance, 7 (3). pp. 473-502. ISSN 2460-6146 E-ISSN 2460-6618

Purwanto, Hadi (2021) Advanced processing of Lateritic ore. BOOK PUBLISHER INTERNATIONAL, UK / India. ISBN 978-93-91473-07-5

S

Sahir, Nurul Nadiah and Hassan, Noor Azlina and Hassan, Norita and Johari, Norhasnidawani (2021) Graphene oxide microcapsules (GOMs) with linseed oil core via Pickering emulsion method effect of disperse speed. IIUM Engineering Journal, 22 (1). pp. 213-222. ISSN 1511-788X E-ISSN 2289-7860

Samat, Noorasikin and Mohmed Nasir, Muhamad Faris Farhan and Marzuki, Zubaidah and Md Akil, Hazizan (2021) Mechanical performance of composites materials prepared from waste plastics and tubed tyre. Journal of Sustainability Science and Management, 16 (8). pp. 229-239. ISSN 1823-8556 E-ISSN 2672-7226 (In Press)

Samat, Noorasikin and Sulaiman, Muhammad Afnan and Ahmad, Zuraida and Anuar, Hazleen (2021) A comparative study on the desiccant effect of polypropylene and polylactic acid composites reinforced with different lignocellulosic fibres. Journal of Applied Science and Engineering, 24 (2). pp. 223-231. ISSN 2708-9975

Sarifuddin, Norshahida and Ahmad, Zuraida and Ahmad Azhar, Ahmad Zahirani and Mohd Zaki, Hafizah Hanim and Azman, Amelia Wong and Nordin, Norhuda Hidayah (2021) Modeling humanizing education through newly reviewed materials engineering curriculum. IIUM Journal of Education Studies, 9 (3). pp. 63-79. ISSN 2289-8085

Shaharuddin, Mohd Izwan and Mohd Salit, Sapuan and Mohamed Yusoff, Mohd. Zuhri and Abd Rahman, Mohamed (2021) Thermal stability and dynamic mechanical analysis of Benzoylation treated sugar palm/kenaf fiber reinforced polypropylene hybrid composites. Polymers, 13 (17). ISSN 2073-4360

Shaheer, Ahmed Khan and Zakaria, Mohammed Zain and Mansoor, Mohammad and Hasan Mahfuz, M.M. and Rahman, Mohammed Ataur and Noor Rashid, Mir Akmam and Rais, Mohammad Salman (2021) Performance investigation of ZnO/PVA nanocomposite film for organic solar cell. Materials Today:Proceedings, 46 (9). xx-xx. ISSN 2214-7853

Shahruddin, Najlah Sakinah and Mustaffa, Nur Haifa Syazwina and Mustafa, Aisyah Madihah and Abd Halim, Nor Farah Huda (2021) An experimental study of tool wear during end milling of carbon fibre reinforced polymer in cutting fluid condition. In: 7th International Conference on Applications and Design in Mechanical Engineering (ICADME 2021), 23 August 2021, UniMAP , Perlis.

Sorooshian, Shahryar and Azizan, Noor Azlinna and Ismail, Md Yusof (2021) Influence of readiness measures on planning tourism digital shift. Academy of Strategic Management Journal, 20 (Special Issue 2). pp. 1-6. ISSN 1544-1458 E-ISSN 1939-6104

Sukindar, Nor Aiman and Awang Dahan, Azib Azhari and Syed Shaharuddin, Sharifah Imihezri and Abd Halim, Nor Farah Huda (2021) Performance of low-cost 3D printer in medical application. In: Manufacturing Science and Engineering Conference ( Virtual Conference ), United State,Ohio. (Unpublished)

Sukindar, Nor Aiman and Mohd Samsuddin, Noorazizi and Syed Shaharuddin, Sharifah Imihezri and Kamaruddin, Shafie and Ahmad Azhar, Ahmad Zahirani and Yang, Chuan Chong and Ab Wahab, Muhammad Adil (2021) Implementation of 3D Printing Technology in the Food Industry. Scientific Review, 7 (4). pp. 50-54. ISSN 2413-8835 E-ISSN 2412-2599

Sukindar, Nor Aiman and Wan Abdul Hamid, Wan Luqman Hakim and Kamaruddin, Shafie (2021) Analysis of printing parameters for tensile test using finite element analysis. In: Intelligent Manufacturing and Mechatronics. Springer. ISBN 978-981-16-0865-0 (Unpublished)

Sukindar, Nor Aiman and Yang, Chuan Choong and Ahmad Azhar, Ahmad Zahirani and Kamaruddin, Shafie and Mel, Maizirwan (2021) 100gm Pouch Food Holder. [Copyright] (Unpublished)

Sulaiman, Mohd Hafis and raof, Natasha A. and Dahnel, Aishah Najiah (2021) The investigation of PVD coating, cryogenic lubrication and ultrasonic vibration on tool wear and surface integrity in manufacturing processes. Jurnal Tribologi, 28. pp. 105-116. E-ISSN 2289-7232

Syed Shaharuddin, Sharifah Imihezri and Abd Aziz, Nor Busyra and Bacho, Nursyawalina and Muhamad Khairussaleh, Nor Khairusshima and Tumian, Afidalina and Zakaria, Irnie Azlin (2021) Modelling the effect of Dammar additions on the mass loss response of soy wax/ Beeswax/ Dammar blends via response surface methodology. In: 6th International Conference on Biotechnology Engineering (ICBioE 2021), 22-23 June 2021, Kuala Lumpur, Malaysia.

Syed Shaharuddin, Sharifah Imihezri and Shamsuddin, Maryam Samirah and Drahman, Mohd Hafiz and Hasan, Zaimah and Mohd Asri, Nurul Anissa and Nordin, Ahmad Amri and Mohd Shaffiar, Norhashimah (2021) A review on the Malaysian and Indonesian batik production, challenges, and innovations in the 21st century. SAGE Open, 11 (3). pp. 1-19. ISSN 2158-2440

U

Urmi, Wajiha Tasnim and A.S, Shafiqah and Rahman, Md Mustafizur and Maleque, Md. Abdul and Kadirgama, Kumaran (2021) Preparation methods and challenges of hybrid nanofluids: a review. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 78 (2). pp. 56-66. E-ISSN 2289-7879

Y

Yang, Chuan Choong and Noor Hanafi, Noor Fiqri Razqi and Mohamad Hanif, Noor Hazrin Hany and Ismail, Ahmad Faris and Chang, Hsueh-Hsien (2021) A novel non-intrusive vibration energy harvesting method for air conditioning compressor unit. Sustainability, 13 (18). E-ISSN 2071-1050

Yap, Suk Wy and Johari, Norhasnidawani and Mazlan, Saiful Amri and Hassan, Noor Azlina (2021) Mechanochemical durability and self-cleaning performance of zinc oxide-epoxy superhydrophobic coating prepared via a facile one-step approach. Ceramics International, 47 (11). pp. 15825-15833. ISSN 0272-8842 E-ISSN 1873-3956

Yusof, Noor Jazilah and Kamaruddin, Shafie (2021) Optimal design of step – cone pulley problem using the bees algorithm. In: Intelligent Manufacturing and Mechatronics. Lecture Notes in Mechanical Engineering . Springer Nature Singapore Pte Ltd, Singapore, pp. 139-149. ISBN 978-981-16-0865-0