Items where Division is "Kulliyyah of Engineering > Department of Manufacturing and Materials Engineering" and Year is 2019

A

A. Raof, Natasha and A. Ghani, Jaharah and Che Haron, Che Hassan (2019) Machining-induced grain refinement of AISI 4340 alloy steel under dry and cryogenic conditions. Journal of Materials Research and Technology, 8 (5). pp. 4347-4353. ISSN 2238-7854

Abd. Rashid, Siti Munirah Salimah and Anuar, Hazleen and Mohd Apandi, Siti Nur E'zzati and Buys, Yose Fachmi and Hassan, Noor Azlina (2019) Effects of plasticizer on mechanical properties of durian skin fiber reinforced polylactic acid biocomposite. In: International Conference on X-Rays and Related Techniques in Research and Industry 2018 (ICXRI 2018), 18th-19th August 2018, Kota Baharu, Kelantan.

Abdul Hamid, Abd. Malek and Zainuddin, Zaid Aqil (2019) Smartphone usage: how is technology affecting your health? In: Being human: responding to changes. Partridge, Singapore, pp. 71-100. ISBN 978-1-5437-4913-7

Abdul Molok, Salma and Hamidon, Nor Ezzati and Ahmad Azhar, Ahmad Zahirani and Manshor, Hanisah and Rejab, Nik Akmar and Ahmad, Zainal Arifin and Mohd. Ali, Afifah (2019) Analysis on physical and microstructural properties of ZTA-SWNT ceramic cutting tool. In: International Conference on X-Rays and Related Techniques in Research and Industry 2018 (ICXRI 2018), 18th-19th August 2018, Kota Baharu, Kelantan.

Adesta, Erry Yulian Triblas and Hilmy, Irfan and ,, Avicenna and Agusman, D. (2019) Toward real time IoT based paste monitoring system for small to medium enterprise (SME). In: 2nd Forum in Research, Science, and Technology (FIRST 2018), 30th–31st October 2018, Palembang, Indonesia.

Ahmad, Zuraida and Tajuddin, Maisarah and Maleque, Md. Abdul and Halim, Zahurin (2019) Effects of particle sizes on the properties of binderless boards made from rattan furniture waste. Journal of Engineering Science, 15. pp. 49-61.

Ahmad Azhar, Ahmad Zahirani and Mohamad Shawal, Siti Hajar and Manshor, Hanisah and Mohd Ali, Afifah and Rejab, Nik Akmar and Chan Abdullah, Ezzat and Ahmad, Zainal Arifin (2019) The effects of CeO2 addition on the physical and microstructural properties of ZTA-TiO2 ceramics composite. Journal of Alloys and Compounds, 773. pp. 27-33. ISSN 0925-8388 E-ISSN 0925-8388

Ahmad Azhar, Ahmad Zahirani and Mohd Rosli, Muhammad Farhan and Manshor, Hanisah and Mohd Ali, Afifah (2019) The effect of dolomite addition onto the phases and hardness of zirconia toughened alumina. In: International Conference on X-Rays and Related Techniques in Research and Industry 2018, ICXRI 2018, 18 - 19 August 2018, Grand Riverview Hotel Kota Bharu, Kelantan; Malaysia.

Al Hazza, Muataz Hazza Faizi and Abdulraman H.A., Saadah (2019) Flank wear modeling in high speed hard end milling using integrated approach of Monte Carlo simulation method and Taguchi design. In: "2019 International Conference on Electrical and Computing Technologies and Applications, ICECTA 2019", 19 - 21 Nov 2019, Ras Al Khaimah, United Arab Emirates.

Al Hazza, Muataz Hazza Faizi and Endut, Nor Amalina and Adesta, Erry Yulian Triblas and Ibrahim, Nur Asmawiyah (2019) Numerical analysis of aluminum foam sandwich subjected to compression loading. International Journal of Recent Technology and Engineering (IJRTE), 7 (6S). pp. 138-142. E-ISSN 2277-3878

Al Hazza, Muataz Hazza Faizi and Ibrahim, Nur Asmawiyah and Adesta, Erry Yulian Triblas and Endut, Nor Amalina and Yeakub Ali, Mohammad (2019) Flexural behavior of open-cell aluminum foam sandwich under three-point bending. International Journal of Recent Technology and Engineering (IJRTE), 7 (6S). pp. 134-137. E-ISSN 2277-3878

Al-Bat’hi, Souad A. M. and Ahmed, Nafees (2019) Fabrication and characterization of CNT/ZnO thin film junction for photovoltaic application. In: 7th International Conference on Nano and Materials Science, ICNMS 2019, 4- 7 January 2019, San Francisco; United States.

Anuar, Hazleen and Ali, Fathilah and Buys, Yose Fachmi and Mohd Apandi, Siti Nur E'zzati and Abd. Rashid, Siti Munirah Salimah and Adli, Sarah Amalina (2019) Sustainable nanocomposites in food packaging. In: Sustainable polymer composites and nanocomposites. Springer Nature Switzerland, Switerland, pp. 413-436. ISBN 978-3-030-05398-7

Arief, Rudi Kurniawan and Adesta, Erry Yulian Triblas and Hilmy, Irfan (2019) Hardware improvement of FDM 3D printer: issue of bed leveling failures. International Journal of Innovative Technology and Exploring Engineering (IJITEE), 8 (4). pp. 603-614. E-ISSN 2278-3075

Arifutzzaman, A and Ismail, Ahmad Faris and Alam, Md. Zahangir and Khan, Ahsan Ali and Saidur, Rahman (2019) Investigation of extraction yields of exfoliated graphene in deionized water from organic solvents. International Journal of Technology, 10 (6). pp. 1251-1259. ISSN 2086-9614

Arifutzzaman, A. and Ismail, Ahmad Faris and Yaacob, Iskandar Idris and Alam, Md Zahangir and Khan, Ahsan Ali (2019) Stability investigation of water based exfoliated graphene nanofluids. In: 4th International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2018), 19th-20th September 2018, Kuala Lumpur, Malaysia.

Arifutzzaman, Abul and Ismail, Ahmad Faris and Yaacob, Iskandar Idris and Alam, Md Zahangir and Khan, Ahsan Ali (2019) Experimental investigation of concentration yields of liquid phase exfoliated graphene in organic solvent media. In: 4th International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2018), 19th-20th September 2018, Kuala Lumpur, Malaysia.

Awang, Mohamad and Wan Mohd, Wan Roslina and Sarifuddin, Norshahida (2019) Study the effects of an addition of titanium dioxide (TiO2) on the mechanical and thermal properties of polypropylene-rice husk green composites. Materials Research Express, 6 (7). E-ISSN 2053-1591

Azman, Amelia Wong and Fajingbesi, Fawwaz Eniola and Ahmad, Zuraida and Mohd Mustafah, Yasir and Olanrewaju, Rashidah Funke and Hamzaid, Nur Azah (2019) Electrical stimulation in combating pressure ulcer for immobilize subjects: a conceptual framework. In: International Conference on Biomedical Engineering, 26 - 27 Aug 2019, Penang Island.

B

Banu, Asfana and Ali, Mohammad Yeakub and Abd Rahman, Md Nizam and Konneh, Mohamed (2019) Investigation of process parameters for stable micro dry wire electrical discharge machining. International Journal of Advanced Manufacturing Technology, 103 (1-4). pp. 723-741. ISSN 0268-3768 E-ISSN 1433-3015

Brza, Mohamad A. and Aziz, Shujahadeen and Anuar, Hazleen and Al Hazza, Muataz Hazza Faizi (2019) From green remediation to polymer hybrid fabrication with improved optical band gaps. International Journal of Molecular Sciences, 20 (16). pp. 1-23. ISSN 1661-6596 E-ISSN 1422-0067

C

Che Mohd Noh, Mohd Ihsan and Mohamed, Mohd Ambri and Ismail, Ahmad Ghadafi and Ani, Mohd Hanafi and Majlis, Burhanuddin Yeop (2019) Improvement of gas barrier properties of Polyethylene Terephtalate (PET) by Graphene Nanoplatelets (GNP). In: Nanotech Malaysia 2018 in conjunction with 3rd International Conference on Enabling Science and Nanotechnology (ESciNano 2018), 5th Malaysia Workshop on 2D Materials and Carbon Nanotube (2DMC 2018), 7th-9th May 2018, Kuala Lumpur.

F

Fauzi, Fatin Bazilah and Ismail, Edhuan and Osman, Muhammad Naqib and Rosli, Muhammad Suffian and Ismail, Ahmad Faris and Mohamed, Mohd Ambri and Syed Abu Bakar, Syed Noh and Ani, Mohd Hanafi (2019) Influence of mixed convection in atmospheric pressure chemical vapor deposition of graphene growth. In: Nanotech Malaysia 2018 in conjunction with 3rd International Conference on Enabling Science and Nanotechnology (ESciNano 2018), 5th Malaysia Workshop on 2D Materials and Carbon Nanotube (2DMC 2018), 7th-9th May 2018, Kuala Lumpur.

Fauzi, Fatin Bazilah and Ismail, Edhuan and Syed Abu Bakar, Syed Noh and Ismail, Ahmad Faris and Mohamed, Mohd Ambri and Md Din, Muhammad Faiz and Illias, Suhaimi and Ani, Mohd Hanafi (2019) The role of gas-phase dynamics in interfacial phenomena during few-layer graphene growth through atmospheric pressure chemical vapour deposition. Physical Chemistry Chemical Physics, 22 (6). pp. 3481-3489. ISSN 1463-9076 E-ISSN 1463-9084

H

Hablee, Sufiamie and Samsudin, Nurhusna and Sopyan, Lis and Mel, Maizirwan and Mohd. Salleh, Hamzah and Rahman, Md. Mujibur and Ahmad Raus, Raha (2019) Calcium phosphate /poly (ethylene glycol) bone cement: cell culture performance. International Journal of Recent Technology and Engineering, 7 (6). pp. 82-86. ISSN 2277-3878

Hamidon, Nor Ezzati and Abdul Molok, Salma and Manshor, Hanisah and Ahmad Azhar, Ahmad Zahirani and Rejab, Nik Akmar and Ahmad, Zainal Arifin and Mohd Ali, Afifah (2019) Hardness and fracture toughness analysis of ZTA–SWCNT ceramic cutting inserts. In: International Conference on X-Rays and Related Techniques in Research and Industry 2018 (IXCRI 2018), 18th-19th August 2018, Kota Bharu, Kelantan.

I

Illias, S and Rosman, N A and Abdullah, N S and Shaiful, A I M and Omar, M N B and Ismail, K A and Ani, Mohd Hanafi (2019) Evaporation lifetime and boiling curve on hemispherical stainless steel (304) surface. In: UNSPECIFIED.

Illias, Suhaimi and Hussain, Suhaila and Rosman, N A and Abdullah, Nadiah Syafiqah and Shaiful, Mohamad Shaiful Ashrul and Omar, Mohd Nazri and Ismail, K A and Ani, Mohd Hanafi (2019) Receding height of water droplet in the film boiling regime. In: 6th International Conference on Applications and Design in Mechanical Engineering, 26 - 27 Aug 2019, Penang Island.

Ismail, Edhuan and Fauzi, Fatin Bazilah and Mohamed, Mohd Ambri and Mohd Yasin, Mohd Fairus and Mohd Abid, Mohd Asyadi Azam and Yaacob, Iskandar Idris and Md Din, Muhamad Faiz and Ani, Mohd Hanafi (2019) Kinetic studies of few-layer graphene grown by flame deposition from the perspective of gas composition and temperature. RSC Advances, 9 (36). pp. 21000-21008. ISSN 2046-2069

K

Kamal Ariffin, Fathin Nadhirah and Ahmad Nor, Yusilawati and Sulaiman, Sarina and Jamal, Nur Ayuni (2019) Treatment of waste engine oil using optimized acid/clay refining method. Biological and Natural Resources Engineering Journal, 2 (2). pp. 37-48. ISSN 2637-0719

Kamaruddin, Shafie and Abd Latif, Mohd Arif Hafizi (2019) Application of the bees algorithm for constrained mechanical design optimisation problem. International Journal of Engineering Materials and Manufacture, 4 (1). pp. 27-32. E-ISSN 0128-1852

Kamaruddin, Shafie and Bahari, Muhammad Syahril and Pham, Duc Truong and Mohd Amin Hamzas, Mohd Fidzwan and Zakaria, S (2019) Bees algorithm enhanced with Nelder and Mead method for numerical function optimisation. AIP Conference Proceedings, 2129. pp. 1-9.

Khalili, Amjad and Abbadi, Ala’ and Ismail, Md Yusof (2019) Perspective of social media as an organisational KM tool: contemporary literature review. International Journal Knowledge and Learning, 13 (1). pp. 10-24.

Khalili, Amjad and Ismail, Md Yusof and Karim, A.N. Mustafizul and Che Daud, Mohd Radzi (2019) Quality management practices and sustainable performance: examining the role of soft TQM as mediator. International Journal of Industrial and Systems Engineering, 31 (2). pp. 250-277. ISSN 1748-5037 E-ISSN 1748-5045

Khalili, Amjad and Karim, A.N. Mustafizul and Ismail, Md Yusof and Che Daud, Mohd Radzi (2019) Linkages of QMS and soft EMS: perceptions of operations managers as modelled by SEM. International Journal of Services and Operations Management, 34 (3). pp. 341-360. ISSN 1744-2389

Khamis, Siti Salwa and Purwanto, Hadi and Rozhan, Alya Naili and Abd. Rahman, Mohamed and Mohd. Salleh, Hamzah (2019) Characterization of municipal solid waste in Malaysia for energy recovery. IOP Conference Series: Earth and Environmental Science, 264 (1). pp. 1-6. ISSN 1755-1307 E-ISSN 1755-1315

M

Mahmuda, M.S. and Buys, Yose Fachmi and Anuara, H. and Sopyan, Lis (2019) Miscibility, morphology and mechanical properties of compatibilized polylactic acid/thermoplastic polyurethane blends. In: 6th International Conference on Recent Advances in Materials, Minerals and Environment, RAMM 2018, 27 - 29 November 2018, Penang.

Maleque, Md. Abdul and Halim, Zahurin and Ahmad Azhar, Ahmad Zahirani and Mohd Zaki, Hafizah Hanim and A.R., Nur Farina and Parveez, Bisma (2019) Sustainable lightweight composite materials. In: Tech Plan Demo Day in Malaysia 2019, 20 July 2019, SME Corporation, KL Sentral, KL. (Unpublished)

Maleque, Md. Abdul and Paijan, Lailatul Harina and Othman, Norinsan Kamil and Rahman, Md Mustafizur (2019) Optimization of gaseous nitriding process parameters for hard surface layer of duplex stainless steel. International Journal of Materials Engineering Innovation, 10 (3). pp. 165-185. ISSN 1757-2754 E-ISSN 1757-2762

Maleque, Md. Abdul and Paijan, Lailatul Harina and Othman, Norinsan Kamil and Rahman, Md. Mustafizur (2019) Optimisation of gaseous nitriding process parameters for hard surface layer of duplex stainless steel. International Journal of Materials Engineering Innovation, 10 (3). pp. 165-185. ISSN 1757-2754

Mamat, M. Azwan and Maleque, Md. Abdul and Rahman, Md Mustafizur (2019) TIG torch surfacing of metallic materials – a critical review. Transactions of the IMF, 97 (1). pp. 12-21. ISSN 0020-2967 E-ISSN 1745-9192

Mohamad Sholihin, Mohamad Hanis and Mohd Zaki, Hafizah Hanim and Sarifuddin, Norshahida and Nor Hairin, Assayidatul Laila (2019) Effect of annealing temperatures on surface oxidation of Ti-50.8 at% Ni shape memory alloy. In: International Conference on X-Rays and Related Techniques in Research and Industry, ICXRI 2018, 18th-19th August, 2018, Grand Riverview Hotel, Kota Bharu.

Mohamed Haider, Farag I. and -, Suryanto (2019) Carbon diffusion in 304I austenitic stainless steel at 650 steel at 650 -750°c in carburizing environment. International Journal of Recent Technology and Engineering (IJRTE, 7 (6). pp. 76-78. ISSN 2277-3878

Mohamed Haneef, Intan Najwa Humaira and Shaffiar, Norhashimah and Buys, Yose Fachmi and Abdul Hamid, Abdul Malek (2019) Finite element analysis (FEA) of polylactic cid/polypropylene carbonate (PLA/PPC) blends fixation plate for craniomaxillofacial surgery. International Journal of Structural Integrity, 10 (5). pp. 678-691. ISSN 1757-9864

Mohd Akhir, Nur Atiqah and Syed Shaharuddin, Sharifah Imihezri and Buys, Yose Fachmi and Othman, Maizatulnisa and Shaffiar, Norhashimah (2019) Characterization of poly (lactic acid) _ poly (ethylene) glycol blends prepared for melt drawn spinning process. In: 6th International Conference on Recent Advances in Materials, Minerals and Environment (RAMM) 2019, 27th-29th November 2018, Penang.

Mohd Daud, Farah Diana and Johari, Muhammad Hilmi and Ahmad Jamal, Afiq Haikal and Kahlib, Nor Amyra Zulianey and Hairin, Assayidatul Laila Nor (2019) Preparation of nano-silica powder from silica sand via sol-precipitation method. In: "International Conference on X-Rays and Related Techniques in Research and Industry 2018, ICXRI 2018", 18 - 19 August 2018, Grand Riverview Hotel, Kota Bharu, Kelantan.

N

Nor Hairin, Assayidatul Laila (2019) Preparation of ZNSB thermoelectric materials using electrodeposition method. Research Report. UNSPECIFIED, IIUM. (Unpublished)

Nor Hairin, Assayidatul Laila and Idris, Mohd Fitri and Othman, Raihan and Mohd Daud, Farah Diana and Rozhan, Alya Naili and Mohd Zaki, Hafizah Hanim (2019) Effect of acceptor impurity (Cu and Al) in Zn4Sb3 thermoelectric materials via hotisostatic pressing (HIP) method. In: Materials characterization using x-rays and related techniques, 18th-19th August 2018, Kota Bharu Kelantan.

Nordin, N.M. and Buys, Yose Fachmi and Anuar, Hazleen and Ani, Mohd Hanafi and Pang, Ming Meng (2019) Development of conductive polymer composites from PLA/TPU blends filled with graphene nanoplatelets. In: 6th International Conference on Recent Advances in Materials, Minerals and Environment (RAMM), 27 - 29 Nov 2018, Batu Feringgi, Penang.

O

Othman, Maizatulnisa and Rashid, Haziq and Jamal, Nur Ayuni and Shaharuddin, Sharifah Imihezri and Sulaiman, Sarina and Hairil, H. Saffiyah and Khalid, Khalisanni and Zakaria, Nazarudin (2019) Effect of cinnamon extraction oil (CEO) for algae biofilm shelf-life prolongation. Polymers, 11 (1). pp. 1-10. ISSN 2073-4360

P

Paijan, Lailatul Harina and Maleque, Md. Abdul (2019) A new approach for composite coating development on duplex stainless steel (DSS). In: Kulliyyah Of Engineering Research, Innovation And Commercialisation Exhibition (KERICE) 2019, 18 September 2019, Gombak, Kuala Lumpur. (Unpublished)

Prabowo, Herry Agung and Adesta, Erry Yulian Triblas (2019) A study of Total Productive Maintenance (TPM) and lean manufacturing tools and their impact on manufacturing performance. International Journal of Recent Technology and Engineering (IJRTE), 7 (6S). pp. 39-43. ISSN 2277-3878

R

Radin Umar, Radin Zaid and Ahmad, Nadiah and Halim, Isa and Lee, Poh Yan and Abdul Hamid, Abd. Malek (2019) Design and development of an ergonomic trolley-lifter for sheet metal handling task: a preliminary study. Safety and Health at Work, 10 (3). pp. 327-335. ISSN 2093-7911 E-ISSN 2093-7997

Radin Umar, Radin Zaid and Ling, Chaifong and Abdullasim, Nazreen and Ahmad, Nadiah and Halim, Isa and Abdul Hamid, Abd. Malek (2019) Occupational wrist postural assessment and monitoring system: development and initial validation. Journal of Engineering Science and Technology, 14 (6). pp. 3421-3436. ISSN 1823-4690

Rasdi, Muhammad Hannan Fathi and Nik Hashim, Nik Nur Wahidah and Hanizam, Syahirah (2019) Around view monitoring system with motion estimation in ADAS application. In: 7th International Conference on Mechatronics Engineering, ICOM 2019, 30 - 31 Oct 2019, Putrajaya.

Roslan, Alida and Manshor, Hanisah and Ahmad Azhar, Ahmad Zahirani (2019) Comparison of zirconia toughened alumina fracture toughness obtained from Vickers indentation by applying various equations. In: International Conference on X-Rays and Related Techniques in Research and Industry 2018, ICXRI 2018, 18 - 19 August 2018, Grand Riverview Hotel, Kota Bharu, Kelantan.

Roslan, Muhamad Hafizuddin and Bahar, Rubina and Hilmy, Irfan (2019) Experimental investigation on fresh water production using air gap membrane distillation. International Journal of Engineering & Technology, 7 (6). pp. 229-234. ISSN 2277-3878

Rozhan, Alya Naili and Hairin, Assayidatul Laila Nor and Mohd. Salleh, Hamzah and Purwanto, Hadi (2019) Mechanism of carbon deposition within char derived from oil palm empty fruit bunch. In: International Conference on X-Rays and Related Techniques in Research and Industry 2018, ICXRI 2018, 18 - 19 August 2018, Grand Riverview Hotel, Kota Bharu, Kelantan.

S

Sahari, J. and Maleque, Md. Abdul and Sapuan, S. M. (2019) Sugar palm starch biopolymer: extraction and processing. In: Sugar Palm Biofibers, Biopolymers and Biocomposites. CRC Press, Boca Raton and London, pp. 41-55. ISBN 978-1-4987-5302-9

Sahari, J. and Maleque, Md. Abdul and Sapuan, S.M. and Ishak, M.R. and Jumaidin, R. (2019) Performance of thermoplastic sugar palm starch biopolymers. In: Sugar Palm Biofibers, Biopolymers and Biocomposites. CRC Press, Boca Raton and London, pp. 57-70. ISBN 978-1-4987-5302-9

Sahari, J. and Maleque, Md. Abdul and Sapuan, S.M. and Ishak, M.R. and Suriani, M.J. and YUsriah, L. (2019) Review of development and characterization of sugar palm fiber–reinforced polymer composites. In: Sugar Palm Biofibers, Biopolymers and Biocomposites. CRC Press, Boca Raton and London, pp. 15-40. ISBN 978-1-4987-5302-9

Samat, Noorasikin and Mohd Lazim, Nurul Hakimah and Halim, Zahurin (2019) Dynamic mechanical and water absorption properties of microcrystalline cellulose reinforced polypropylene composites: the effect of unconventional irradiation route. IIUM Engineering Journal, 20 (2). pp. 188-196. ISSN 1511-788X E-ISSN 2289-7860

Samat, Noorasikin and Sharifuddin, N and M.I, Shafiee (2019) Reprocessing of polypropylene/cellulose composites: effects on thermal properties. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2019), 30th-31st October 2019, Putrajaya. (Unpublished)

Sirat, Mohd Shukri and Ismail, Edhuan and Ramlan, Amir Hakimi and Fauzi, Fatin Bazilah and Yaacob, Iskandar Idris and Mohamed, Mohd Ambri and Mohd Abid, Mohd Asyadi Azam and Ani, Mohd Hanafi (2019) Influence of surface energy and elastic strain energy on the graphene growth in chemical vapor deposition. In: Nanotech Malaysia 2018 in conjunction with 3rd International Conference on Enabling Science and Nanotechnology (ESciNano 2018), 5th Malaysia Workshop on 2D Materials and Carbon Nanotube (2DMC 2018), 7th-9th May 2018, Kuala Lumpur.

Sofian, Anis Sofia and Samat, Noorasikin and Meor Sulaiman, Meor Yusoff and Paulus, Wilfred (2019) Alumina recovery from industrial waste: study on the thermal, tensile and wear properties of polypropylene/alumina nanocomposites. International Journal of Precision Engineering and Manufacturing-Green Technology, 7 (1). pp. 163-172. ISSN 2288-6206 E-ISSN 2198-0810

Sopyan, Iis and Hablee, Sufiamie and Razali, Nurul Nabilah (2019) Straightforward synthesis of injectable calcium phosphate cement through novel hydrthermal technique for bone filling materials. Research Report. UNSPECIFIED. (Unpublished)

Sulaeman, Erwin and Hoq, S.M. Afzal and Okhunov, Abdurahim and Hilmy, Irfan and Badran, Marwan A A (2019) Convergence and error analysis of a bi-quadratic triangular galerkin finite element model for heat conduction simulation. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 54 (1). pp. 78-86. ISSN 2289-7879

Sulaiman, Mohd Hafis and Christiansen, Peter Leth and Bay, Niels (2019) An experimental compression test of lubricants with direct measurement of lubricant pressure build-up. Jurnal Tribologi, 20. pp. 51-64. ISSN 2289-7232

Sulaiman, Mohd Hafis and R.N, Farahana and Mohd Jamir, Mohd Ridzuan and Mohammad Jaafar, Muhammad Hasnulhadi (2019) Manufacturing strategies and tribology of tailored tool surface topographies for enhanced lubrication in metal forming. In: 3rd Mytribos Symposium 2019 Universiti Malaysia Perlis (UniMAP), 29 April 2019, Arau, Perlis.

Sulaiman, Mohd Hafis and Ramli, Nur Farahana and Bienk, K and Nielsen, Chris Valentin and Bay, Niels (2019) Effects of DLC/TiAlN-coated die on friction and wear in sheet-metal forming under dry and oil-lubricated conditions: Experimental and numerical studies. Wear, 438-439. pp. 1-10. ISSN 0043-1648

Sutjipto, Agus Geter Edy and Hisyam, Anwaruddin and Salim, Nurjannah and Ab Rahim, Mohd Hasbi and Legowo, Ari and Ani, Mohd Hanafi (2019) Development of inert ceramic for industrial application based on ternary phase diagram of potassiun oxide-aluminum oxide-silicon dioxide. In: 2019 Advances in Science and Engineering Technology International Conferences (ASET), 26 Mar - 10 Apr 2019, Dubai, United Arab Emirates.

Syed Shaharuddin, Sharifah Imihezri and Mukhtar, Abdul Rahman and Mohd. Akhir, Nur Atiqah and Shaffiar, Norhashimah and Othman, Maizatulnisa (2019) Experimental and finite element analysis of solvent cast poly (lactic acid) thin film blends. IIUM Engineering Journal, 20 (2). pp. 197-210. ISSN 1511-758X E-ISSN 2289-7860

Y

Yeakub Ali, Mohammad and Ali Khan, Ahsan and Abd Rahman, Mohamed and Mohamed Ariff, Tasnim Firdaus (2019) Noble approach to control vibration using minimum quantity lubrication (MQL) in micro milling. Research Report. UNSPECIFIED. (Unpublished)

Yusuff, Mohamad Ikhwan and Sarifuddin, Norshahida and Ahmad, Zuraida (2019) Mechanical properties of woven carbon fiber/kenaf fabric reinforced epoxy matrix hybrid composites. MALAYSIAN JOURNAL OF MICROSCOPY, 15 (1). pp. 10-16. ISSN 1823-7010 E-ISSN 2600-7444