Items where Division is "Kulliyyah of Engineering > Department of Manufacturing and Materials Engineering" and Year is 2014

Al-Bat’hi, , Souad A. M. and Ahmad , Zuraida (2014) Holly Qur'an: the key reference of materials. Science International Lahore, 26 (5). pp. 2033-2035. ISSN 1013-5316

-, Gunawan and Sopyan, Iis and Mel, Maizirwan and -, Suryanto (2014) Investigations of the effects of initial Zn concentration and sintering conditions on the phase behavior and mechanical properties of Zn-doped bcp. Advances in Environmental Biology, 8 (3(Spe)). pp. 680-685. ISSN 1995-0756 E-ISSN 1998-1066

-, Gunawan and Sopyan, Iis and Mel, Maizirwan and -, Suryanto (2014) Preparation of zinc doped-biphasic calcium phosphate/carbon nanotube composites. Advances in Environmental Biology, 8 (3(Spe)). pp. 787-791. ISSN 1995-0756 E-ISSN 1998-1066

A. Raof, Natasha and Othman, Hazreen and A. Ghani, Jaharah and Che Haron, Che Hassan and Junaidi, Syarif (2014) Chip formation and coefficient of friction in turning S45C medium carbon steel. International Journal of Mechanical & Mechatronics Engineering, 14 (6). pp. 89-92. ISSN 2227-2763 E-ISSN 2077-1258

Abd. Rahman, Mohamed and Mohd. Salit, Sapuan and Abdan, Khalina (2014) Mechanical and thermal properties of josapine pineapple leaf fiber (PALF) and PALF-reinforced vinyl ester composites. Fibers and Polymers, 15 (5). pp. 1035-1041. ISSN 1229-9197 (Print) 1875-0052 (Online)

Abdel-Khalek, Sayed and Berrada, Kamal and Obada, Abdel-Shafy Fahmy and Wahiddin, Mohamed Ridza (2014) Entropy squeezing for qubit - field system under decoherence effect. Quantum Electronics, 44 (3). pp. 274-278. ISSN 1468-4799 (O), 1063-7818 (P)

Abdul Razak, Nur Humairah and Ahmad, Zuraida and Sarifuddin, Norshahida and A. W N, Izwah (2014) Effect of kenaf fibre on starch based biopolymer composite. Advances in Environmental Biology, 8 (3). pp. 765-769. ISSN 1995-0756 E-ISSN 1998-1066

Abdul Razak, Nur Humairah and Ahmad, Zuraida and Sarifuddin, Norshahida and Z.S., Naqiah (2014) Characterizations of thermoplastic starch and starch reinforced montmorillonite clay nanocomposite. Advances in Environmental Biology, 8 (3). pp. 792-796. ISSN 1995-0756 E-ISSN 1998-1066

Abdullah Sidek, 'Atiah and Backhouse, Chris (2014) Environmental sustainability issues in Malaysian metal and fabrication SMEs: comparative analysis from a case study perspectives. In: 4th International Conference on Industrial Engineering and Operations Management (IEOM) 2014, 7-9 Jan 2014, Bali, Indonesia.

Adelek, S.A. and Maleque, Md. Abdul (2014) TIG melted surface modified titanium alloy for automotive cylinder liner application. In: International Conference on Advanced Technology & Sciences (ICAT’14), 12th-15th August 2014, Antalya, Turkey.

Adeleke, S.A. and Maleque, Md. Abdul (2014) Tungsten inert gas surface alloying of commercial purity titanium (CP-Ti) with Fe-C-Si ternary mixtures. Advanced Materials Research, 1024. pp. 207-210. ISSN 1022-6680

Afdzaluddin, Atiqah and Maleque, Md. Abdul and Jawaid, Mohammad and Iqbal, Mohammad (2014) Development of kenaf-glass reinforced unsaturated polyester hybrid composite for structural applications. Composites: Part B: Engineering, 56. pp. 68-73. ISSN 1359-8368

Ahmad, Zuraida and Abdul Razak, Nur Humairah and Mohd Roslan, Nur Suraya and Mosman, Nazariah (2014) Evaluation of Kenaf Fibres Reinforced Starch Based Biocomposite Film through Water Absorption and Biodegradation Properties. Journal of Engineering Science, 10. pp. 31-39. ISSN 1823-3430

Ahmad, Zuraida and Halim, Zahurin and Mohamad, Souad A. and Salleh, Md. Noor and Ismail, Ahmad Faris (2014) Tapping into student’s passion, curiosity, engagement and dreams: engineering educator’s task. Science International Lahore, 26 (5). pp. 2569-2575. ISSN 1013-5316

Ahmad, Zuraida and Z. N., Najiah and Abdul Razak, Nurhumairah and Sarifuddin, Norshahida (2014) Properties of thermoplastic starch/kenaf composite. Molecular Crystals and Liquid Crystals, 603 (1). pp. 173-179. ISSN 1542-1406 E-ISSN 1563-5287

Ahmad Nawawi, Natasha and Ramesh, Singh and Hamdi, Mohd and Tan, Chou Young and Purbolaksono, Judha and Toulouei, Ranna and Sopyan, Iis (2014) Synthesis and properties of biphasic calcium phosphate prepared by different methods. Advanced Materials Research, 970. pp. 20-25. ISSN 1022-6680

Al Hazza, Muataz Hazza Faizi and Adesta, Erry Yulian Triblas and Hassan, Muhammad Hasibul and Shaffiar, Norhashimah (2014) Surface roughness modeling in high speed hard turning using regression analysis. International Review of Mechanical Engineering, 8 (2). pp. 431-436. ISSN 1970-8734

Al Hazza, Muataz Hazza Faizi and Hassan, Muhammad Hasibul (2014) ANN modeling of nickel base super alloys for time dependent deformation. Journal of Automation and Control Engineering , 2 (4). pp. 353-356. ISSN 2301-3702

Al Hazza, Muataz Hazza Faizi and M. Al Amami , Abduraouf and Taha, Assem Hatem and Mohd Nadhir, Mohd Hafiq (2014) Decision Based Fuzzy Rules for RFID Implementation in Supply Chain Management. International Review on Modelling and Simulations (I.RE.MO.S.), 7 (5). pp. 871-877. ISSN 1974-9821

Ali, Maisarah and Abdullah, Muhd Sufian and Saad, Siti Asmahani (2014) Effect of calcium carbonate replacement on workability and mechanical strength of portland cement concrete. In: International Conference on Advances in Manufacturing and Materials Engineering 2014 (ICAMME 2014) 23-25 September 2014, Kuala Lumpur, Malaysia, 23 - 25 September 2014, Kuala Lumpur. (Unpublished)

Ali, Maisarah and Fadzil, Mohd Syafiq and Saad, Siti Asmahani (2014) Effect of rice husk ash (RHA) on physical property and mechanical strength of concrete. In: 2nd International Conference on Advances in Manufacturing and Materials Engineering 2014 (ICAMME 2014), 23 - 25 September 2014, Kuala Lumpur. (Unpublished)

Ali, Maisarah and Oladokun, Majeed and Osman, Samsul Bahrin (2014) An improved method to evaluate indoor microclimatic data: case study of a book archive in a hot and humid climate. In: International Research, Invention and Innovation Exhibition 2014 (IRIIE2014), 11th -13th June 2014, Cultural Activity Center (CAC), Internatioanal Islamic University Malaysia.

Ali, Maisarah and Oladokun, Majeed and Osman, Samsul Bahrin and Samsuddin, Niza and Hamzah, Hairul Aini and Salleh, Md. Noor (2014) Influence of indoor microclimate distribution on mould infestation in a university library. In: International Civil and Infrastructure Engineering Conference (InCIEC2014), 28 September - 1 October 2014 , Kota Kinabalu, Sabah Malaysia.

Ali, Maisarah and Saad , Siti Asmahani and Khairuddin, Noor Farah Elyani and Sidek, Ammar Hamzi Sidek and Md. Salim, Muhammad Faiz (2014) Mechanical properties of bamboo fibre composite incorporating pulverized fuel ash. In: 2nd International Conference on Advances in Manufacturing and Materials Engineering 2014 (ICAMME 2014), 23rd - 25th September 2014, Sunway Putra Hotel, Kuala Lumpur. (Unpublished)

Aliyah, L. Husniyah and Anuar, Hazleen (2014) Potential of electron beam irradiated hdpe/epr blend as shoes sole. Movement, Health & Exercise, 3. pp. 49-56. ISSN 2231-9409

Alqap, Asep Sofwan F. and Sopyan, Iis and -, Suryanto (2014) The effects of excess calcium and aging media on mechanical properties of calcium phosphate filling materials. Advanced Materials Research, 911. pp. 195-199. ISSN 1022-6680

Amin, A. K. M. Nurul and Ginta, Turnad Lenggo (2014) Heat-assisted machining. In: Comprehensive Materials Processing. Advanced Machining Technologies, 11 . Elsevier Ltd., Amsterdam, pp. 297-331. ISBN 9780080965338

Amin, A. K. M. Nurul and Lajis, M. A. and Ismail, Ahmad Faris (2014) A Method and an Apparatus for Machining a Tool Steel. MY-152227-A.

Amin, A. K. M. Nurul and Mohamad, Ummu Atiqah Khairiyah and Arif, Muammer Din (2014) Implementation of magnetic damping to reduce chatter amplitude and tool wear during turning of stainless steel AISI 304. Applied Mechanics and Materials, 607. pp. 171-175. ISSN 1660-9336

Amin, A. K. M. Nurul and Nassar, Mahmoud M.A. and Arif, Muammer Din (2014) Optimization of surface roughness in micro-high speed end milling of soda lime glass using uncoated tungsten carbide tool with compressed air blowing. Applied Mechanics and Materials, 607. pp. 103-107. ISSN 1660-9336

Amir, Adibah and Mamat, Othman (2014) Wear behaviour of powder metallurgy iron composite reinforced with 20wt.% silica particles. International Journal of Fracture Fatigue and Wear, 2. pp. 314-319. ISSN 2294-7868

Ang, Beechin and Yaacob, Iskandar Idris and Chew, C. S. (2014) Effect of FeCl2 concentration on the properties of magnetic nanoparticles by using Massart's procedure. Sains Malaysiana, 43 (4). pp. 611-616. ISSN 0126-6039

Ani, Mohd Hanafi and Muhamad Ali, Abu Hanifah and Mohamed, Mohd Ambri (2014) Channel length effect on the saturation current and the threshold voltages of CNTFET. In: 11th IEEE International Conference on Semiconductor Electronics, ICSE 2014, 27 - 29 August 2014, Berjaya Times Square Hotel Kuala Lumpur; Malaysia.

Anuar, Hazleen and Aimi, N. Nur and Manshor, M.R. and Wan Nazri, W.B. and Mohd Salit, Sapuan (2014) Optimizing the parameters in durian skin fiber reinforcedpolypropylene composites by response surface methodology. Industrial Crops and Products, 54. pp. 291-295. ISSN 0926-6690

Ariff, Tasnim Firdaus and Azmi, Muhammad Firdaus and Iqbal, Mohammad (2014) Cost analysis of using hybrid microwave post-sintered aluminium oxide inserts. In: Handbook on emerging trends in scientific research. PAK publishing group, Singapore, pp. 53-58. ISBN 9789699952074

Ariff, Tasnim Firdaus and Jalil, Muhammad Ezurin and Bahar, Rubina (2014) Design improvements in the inner shell of a motorbike helmet using coconut fiber composite. In: Handbook on emerging trends in scientific research. PAK publishing group, Singapore, pp. 59-65. ISBN 978-969-9952-07-4

Bahar, Rubina and Hawlader, Mohammad Nurul Alam and Mohamed Ariff, Tasnim Firdaus (2014) Effect of coolant plate geometry and material in a freshwater production system: an experimental study. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2014), 23th-25th September 2014, Kuala Lumpur. (Unpublished)

Bahar, Rubina and Yahya, Nur Adilah and Mohamed Ariff, Tasnim Firdaus (2014) Design and development of a versatile ice clamping system. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME2014), 23rd-25th September 2014, Kuala Lumpur. (Unpublished)

Banu, Asfana and Ali, Mohammad Yeakub and Abd. Rahman, Mohamed (2014) Micro-electro discharge machining of nonconductive zirconia ceramic: investigation of MRR and recast layer hardness. The International Journal of Advanced Manufacturing Technology, 75 (1-4). pp. 257-267. ISSN 0268-3768 E-ISSN 1433-3015

Buys, Yose Fachmi and Lokman, Nor Afiza Syafina (2014) Conductive polymer composites from polylactic acid/Natural rubber filled with carbon black. In: International Conference on Advances in Manufacturing and Materials Engineering 2014 (ICAMME 2014), 23rd-25th Sept. 2014, Kuala Lumpur. (Unpublished)

Dahnel, Aishah Najiah and Barnes, Stuart and Bhudwannachai, Pipat (2014) Drilling of carbon fibre composites: a review. In: 1st International Manufacturing Engineering Conference (iMEC) 2013, 1st-3rd July 2013, Gambang, Kuantan, Pahang.

Emrul Kays, H. M. and Karim, A. N. Mustafizul and Abdesselam, M. and Al Hazza, Muataz Hazza Faizi and Sarker, M. Ruhul Amin (2014) Formulation of integer programming model for balancing and scheduling of production line having shared resources. In: International Conference on Industrial Engineering and Operations Management, 7th-9th Jan. 2014, Bali, Indonesia.

Ferdaus, Mohammad Meftahul and Rashid, Muhammad Mahbubur and Hassan, Muhammad Hasibul and Rahman, Mohammed Ataur (2014) Optimal design of magneto-rheological damper comparing different configurations by finite element analysis. Journal of Mechanical Science and Technology, 28 (9). pp. 3667-3677. ISSN 1976-3824 (O), 1738-494X (P)

Hadi Puwanto, purwanto (2014) Utilization of palm oil biomass for treatment of low grade Malaysian iron ore. In: Innovation of Ironmaking Technologies and Future International Collaboration : To Overcome Energy & Resource Restrictions in Accordance with Environments, 10-11 November 2014, Tokyo. (Unpublished)

Hameed, Hameed Mahmood and Harun, Nurliyana and -, Suryanto and Hilmy, Irfan (2014) Physical properties of electroless nickel-tungsten coating on mild steels obtained from acetic bath. In: 2nd International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2014), 23rd - 25th September 2014, Kuala Lumpur . (Unpublished)

Hassan, Muhammad Hasibul and Al Hazza, Muataz Hazza Faizi (2014) Tensile parameters evaluation of two solid solution super alloys by ANN modeling. International Review of Mechanical Engineering, 8 (2). pp. 338-343. ISSN 1970-8734

Hilmy, Irfan and Adesta, Erry Yulian Triblas (2014) Welding performance of a homemade friction stir welding tool. Applied Mechanics and Materials, 446-47. pp. 660-664. ISSN 1660-9336

Hilmy, Irfan and Adesta, Erry Yulian Triblas and Riza, Muhammad (2014) Heat generation performance of a homemade friction stir welding tool. Applied Mechanics and Materials, 529 (2014). pp. 200-205. ISSN 1022-6680

Hilmy, Irfan and Adesta, Erry Yulian Triblas and Samsul Bahrim, Nur’atiyah Najwa and Azhar, Aini Nurrasyidah and Mohd Shahar, Siti Fatimah (2014) Development of design structure matrix of a product architecture. Case study: multi purpose CNC router. In: IIUM Engineering Congress 2014, 23rd - 25th Sept. 2014, Sunway Putra Hotel, Kuala Lumpur, Malaysia. (Unpublished)

Ibrahim Sktani, Zhwan Dilshad and Ahmad Azhar, Ahmad Zahirani and Ratnam, Mani Maran and Ahmad, Zainal Arifin (2014) The influence of in-situ formation of hibonite on the properties of zirconia toughened alumina (ZTA) composites. Ceramics International, 40 (4). pp. 6211-6217. ISSN 0272-8842

Iqbal, Mohammad and Konneh, Mohamed and Md Said, Ahmad Yasir and Mohd Zaini, Azri Fadhlan (2014) Surface quality of high speed milling of silicon carbide by using diamond coated tool. Applied Mechanics and Materials, 446-44. pp. 275-278. ISSN 1660-9336

Jamal, N. A. and Farazila, Y. and Ramesh, S. and Anuar, Hazleen (2014) Role of mechanical alloying parameters on powders distribution of Al/Cu alloy and Al/Cu composite. Materials Research Innovations, 18 (6). SD-190. ISSN 1433-075X

Kaiser, Mohammad Rejaul and Abdul Razak, Shamsul Bahri and Anuar, Hazleen (2014) Improvement in thermomechanical properties of injection molded nano-modified hybrid biocomposite. Journal of Thermoplastic Composite Materials, 27 (7). pp. 992-1009. ISSN 0892 - 7057

Karim, A.N. Mustafizul and Abd. Rahman, Mohamed and Hj. Yusop, Nornilawati (2014) Mitigation of WIP-related problems at an IC production line through a suitable inspection sampling plan. In: International Conference on Industrial Engineering and Operations Management, 7th-9th Jan. 2014, Bali, Indonesia.

Karim, A.N. Mustafizul and Begum, Shahida (2014) Enhanced performance of zinc oxide arrester by simple modification in processing and design. Journal of Material Science & Engineering, 3 (1). pp. 1-6. ISSN 2169-0022

Karim, A.N. Mustafizul and Ikram, M and Kays, H. M. Emrul and Abdesselam, M. and Ginta, Turnad Lenggo (2014) Assessment of machining cost for end-milling of Ti-6Al-4V titanium alloy through RSM-based parametric model. Advanced Materials Research, 529. pp. 83-89. ISSN 1022-6680

Konneh, Mohamed and Sudin, Izman and Abdullah, Kassim Abdulrahman (2014) Milling of carbon fibre reinforced polymer (CFRP) using TiAlN coated end mills. In: International Conference on Innovative Trends in Multidisciplinary Academic Research (ITMAR 2014), 20th-21st October 2014, Istanbul, Turkey.

M., Abdesselam and Karim, A.N. Mustafizul and Kays, H. M. Emrul and Sarker, R. A. (2014) Forecasting demand: development of a fuzzy growth adjusted holt-winters approach. Advanced Materials Research, 529. pp. 402-407. ISSN 1022-6680

Maleque, Md. Abdul (2014) Contemporary light weight composite material -milestone towards automotive brake rotor application. In: 2nd International Conference on Advances in Manufacturing and Materials Engineering 2014 (ICAMME 2014), 23rd - 25th September 2014, Sunway Putra Hotel, Kuala Lumpur. (Unpublished)

Maleque, Md. Abdul (2014) Performance assessment of aluminium composite material for automotive brake rotor. International Journal of Vehicle Systems Modelling and Testing, 9 (3/4). pp. 207-217. ISSN 1745-6444 (O), 1745-6436 (P)

Maleque, Md. Abdul and Abdulmumin, Adebisi Adetayo (2014) Tribocorrosion behaviour of biodiesel. Tribology Online, 9 (1). pp. 10-20. ISSN 1881-2198

Maleque, Md. Abdul and Afdzaluddin, Atiqah and Faizul, M. and Sapuan, S. M. (2014) Automotive bottom structure composite materials selection: digital logic and knowledge based system approach. In: Engineering composites: properties and applications. Universiti Putra Malaysia Press, Serdang, Selangor, pp. 191-210. ISBN 9789673443963

Maleque, Md. Abdul and Arifutzzaman, Abul (2014) Effect of copper on tensile strength improvement of Al-Cu-SiCp new composite. Materials Science Forum, 773-77. pp. 541-546. ISSN 1662-9752

Maleque, Md. Abdul and Bello , K. and Ahmad , Zuraida (2014) Engineered hexagonal boron nitride utilizing environmental friendly co-deposition technique. In: International Research, Invention and Innovation Exhibition 2014 (IRIIE2014), 11th -13th June 2014, Cultural Activity Center (CAC), Internatioanal Islamic University Malaysia. (Unpublished)

Maleque, Md. Abdul and K.A., Bello and Ahmad, Zuraida (2014) Noble electroless Ni-P deposited hexagonal boron nitride for effective solid lubricant application. In: Malaysia Technology Expo 2014, 20-22 Feb 2014, Kuala Lumpur, Malaysia. (Unpublished)

Maleque, Md. Abdul and Sabur, Abdus and Moudood, Abdul and Ali, Mohammad Yeakub (2014) Effect of Micro-EDM Parameters on Material Removal Rate of Nonconductive ZrO2 Ceramic. Applied Mechanics and Materials, 465. pp. 1329-1333. ISSN 1660-9336

Maleque, Md. Abdul and ghazal , Belal Ahmed and Ali, Mohd Yeakub and Hayyan, Maan and Hashim, Mohd Ali and Ahmed, Abu Saleh (2014) Wear and corrosion of composite coated AISI 4340 steel exposed to jatropha curcas biodiesel. In: 3rd International Conference on Mathematical Applications in Engineering (ICMAE'14), 23th-25th September 2014, Sunway Putra Hotel, Kuala Lumpur. (Unpublished)

Mamun, Abdullah Al and AlSaadi, Mohammed AbdulHakim and Muyibi, Suleyman Aremu and Alam, Md Zahangir and Iis, Sopyan (2014) Kinetics of cadmium adsorption by CNTs grown on PACs. International Journal of Nanoelectronics and Materials, 7 (1). pp. 25-33. ISSN 2232-1535

Manshor, Hanisah and Md Aris, Suriyana and Ahmad Azhar, Ahmad Zahirani and Abdullah, Ezzat Chan and Ahmad, Zainal Arifin (2014) Effects of TiO2 addition on the phase, mechanical properties, and microstructure of zirconia-toughened alumina ceramic composite. Ceramics International. ISSN 0272-8842 (In Press)

Manshor, M.R. and Anuar, Hazleen and Mohd Nasir, Nur Aimi and M.I, Ahmad Fitrie and Wan Busu, Wan Nazri and Sapuan, S. M. and El-Shekeil, Y.A and Wahit, M.U (2014) Mechanical, thermal and morphological properties of durian skin fibre reinforced PLA biocomposites. Materials and Design, 59. pp. 279-286. ISSN 0261-3069

Mohamad, Souad A. (2014) Controlled synthesis of zn based nanostructure materials by electrodeposition technique for photovoltaic applications. In: 4th the International Advances in Applied Physics and Materials Science Congress & Exhibition, 24th-27th April 2014, Turkey. (Unpublished)

Mohamad, Souad A. and Buys, Yose Fachmi and Hadzari , Muhammad Hazwan and Othman, Maizatulnisa (2014) A light material for wind turbine blades. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME’2014), 23rd-25th September 2014, Kuala Lumpur. (Unpublished)

Mohamad, Souad A. and Othman, Maizatulnisa (2014) Effect of temperature on the optical and morphological properties of zinc oxide thin films prepared by RF magnetron sputtering. In: International Conference on Advances in Manufacturing and Materials Engineering 2014 (ICAMME 2014), 23-25 Sep 2014, Kuala Lumpur. (Unpublished)

Mohamed, Abd. Rahman and Asfana, Banu and Ali, Mohammad Yeakub (2014) Investigation of recast layer of non-conductive ceramic due to micro-EDM. Advanced Materials Research, 845. pp. 857-861. ISSN 1022-6680

Mohamed, Mohd Ambri and Majlis, Yeop Burhanuddin and Ani, Mohd Hanafi (2014) Electronic state transition in cooperatively interacting point-defects in semiconductor crystals. In: 11th IEEE International Conference on Semiconductor Electronics, ICSE 2014, 27 - 29 August 2014, Berjaya Times Square Hotel Kuala Lumpur; Malaysia.

Mohamed Ariff, Tasnim Firdaus and Azmi , Mohamad Asyraf and Bahar, Rubina (2014) Economic analysis of using e-glass composite wrap repair system for pipelines in Malaysia. Australian Journal of Basic and Applied Sciences, 8 (15). pp. 241-245. ISSN 1991-8178

Mohamed Ariff, Tasnim Firdaus and Jusoh, Muhd. Fahmi Baihaqi and Parnin , Malek and Azenan, Mohd. Hanif (2014) Improving efficiency and enhancing productivity in transporting fertilizers by using conveyor belt cleaners. Advanced Materials Research, 1082. pp. 505-510. ISSN 1022-6680

Mohd Daud, Farah Diana and Sreekantan, Srimala and Mohamed, Abdul Rahman (2014) Carbon dioxide capture at various temperatures using Ca(OH)2 sorbent fabricated by sol-gel route in ethanol media. Advanced Materials Research, 1024. pp. 35-38. ISSN 1662-8985

Mohd Daud, Farah Diana and Sreekantan, Srimala and Mohamed, Abdul Rahman (2014) Development of Ca(OH)2nanosorbent for intermediate-high temperature CO2 capture via wet chemical route in N,N-Dimethylformamide solvent. Advanced Materials Research , 911. pp. 410-414. ISSN 1662-8985

Mohd Zain, Zakaria and Ndaliman, Mohammed Baba and Khan, Ahsan Ali and Ali, Mohammad Yeakub (2014) Improving micro-hardness of stainless steel through powder-mixed electrical discharge machining. Journal of Mechanical Engineering Science. pp. 1-7. ISSN 0954-4062

Mohd Zaki, Hafizah Hanim and Abdullah, Jamaluddin (2014) Comparison studies on solid state diffusion of Ni–Ti and Ni–TiH2 under CaH2 reducing environment. Materials Letters, 121. pp. 36-39. ISSN 0167-577X

Moudood, M. A. and Sabur, A. and Ali, Mohammad Yeakub and Jaafar, Israd Hakim (2014) Effect of peak current on material removal rate for electrical discharge machining of non-conductive Al2O3 ceramic. Advanced Materials Research, 845. pp. 730-734. ISSN 1022-6680

Moudood, M. A. and Sabur, A. and Lutfi, A. and Ali, Mohammad Yeakub and Jaafar, Israd Hakim (2014) Investigation of the machinability of non-conductive zro2 with different tool electrodes in EDM. International Journal of Automotive and Mechanical Engineering (IJAME), 10. pp. 1866-1876. ISSN 1985-9385 (P) 2180-1606(O)

Nainar, S. Mohammed and Begum, Shahida and Ansari, M.N.M. and Anuar, Hazleen (2014) Tensile properties and morphological studies on HA/PLA biocomposites for tissue engineering scaffolds. International Journal of Engineering Research, 3 (3). pp. 186-189. ISSN 2319 - 6890 (O), 2347 - 5013 (P)

Naqshbandi, Abreeq and Sopyan, Iis and -, Gunawan and -, Suryanto (2014) Sol-gel synthesis of Zn doped HA powders and their conversion to porous bodies. Applied Mechanics and Materials, 493. pp. 603-608. ISSN 1660-9336

Nor Hairin, Assayidatul Laila and Nanko, Makoto (2014) Characterization of cast iron scrap chips toward β-FeSi2 thermoelectric materials. Materials Science Forum, 804. pp. 3-6. E-ISSN 1662-9752

Nor Hairin, Assayidatul Laila and Nanko, Makoto and Takeda, Masatoshi (2014) Upgrade recycling of cast iron scrap chips towards β-FeSi2 thermoelectric materials. Materials, 7. pp. 6304-6316. ISSN 1996-1944

Paruka, Perowansa and Maleque, Md. Abdul and Md Shah, Md Kamal (2014) Performance of hybrid aluminium–composite columnar tube under axial crush force. In: 2nd International Conference on Advances in Manufacturing and Materials Engineering 2014 (ICAMME 2014), 23rd - 25th September 2014, Kuala Lumpur. (Unpublished)

Purwanto, Hadi (2014) Enhancement magnetic properties of Malaysian iron ore by biomass treatment. In: Workshop on Energy Conversion Materials 2014, 9th-11th Oct. 2014, Sapporo, Japan. (Unpublished)

Purwanto, Hadi and Ani, Mohd Hanafi and Salleh, Hamzah Mohd. and Abd Rashid, Rushila Zamani and Yunus, Nurul Azhani and Tomohiro, Akiyama (2014) Enhancement of magnetic properties of Malaysian iron ore by reduction roasting using oil palm empty fruit bunch. ISIJ International, 54 (4). pp. 994-996. ISSN 1347-5460 (O), 0915-1559 (P)

Purwanto, Hadi and Mohd. Salleh, Hamzah and Ani, Mohd Hanafi and Yunus, Nurul Azhani and Zamani Abd Rashid, Rusila and Tomohiro, Akiyama and Othman, Nur Ezzah Faezah (2014) Effect of reduction roasting by using bio-char derived from empty fruit bunch on the magnetic properties of Malaysian iron ore. International Journal of Mineral, Metallurgy and Minerals, 21 (4). pp. 326-330. ISSN 1674-4799

Rejab, Nik Akmar and Ahmad Azhar, Ahmad Zahirani and Khoo, Seng Kian and Ratnam, Mani Maran and Ahmad, Zainal Arifin (2014) Effects of MgO addition on the phase, mechanical properties, and microstructure of zirconia-toughened alumina added with CeO2 (ZTA–CeO2) ceramic composite. Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing, 595. pp. 18-24. ISSN 0921-5093

Rosli, Anis Diyana Hashemi and Yusof, Khairul Aimi and Herman, Sukreen Hana and Johari, M. H. and Shariffudin, Shafinaz Sobihana and Ani, Mohd Hanafi (2014) Effect of metal catalysts type and annealing time on the growth of zinc oxide nanostructures by thermal vapor deposition method. Advanced Materials Research, 1024. pp. 60-63. ISSN 1022-6680

Rosli, A. Bakar and Marbie, M. M. and Herman, Sukreen Hana and Ani, Mohd Hanafi (2014) Gold-catalyzed growth of aluminium-doped zinc oxide nanorods by sputtering method. Journal of Nanomaterials, 2014 (67204). pp. 1-7.

Saad , Siti Asmahani and Abdul Aziz, Farah Nora Aznieta and Ali, Maisarah (2014) Effect of tropical climate condition to compressive strength and microstructure properties of High Performance Fiber Reinforced Concrete (HPFRC). In: International Conference on Advances in Manufacturing and Materials Engineering 2014 (ICAMME 2014), 23rd - 25th September 2014, Kuala Lumpur, Malaysia. (Unpublished)

Sabaruddin, Fatimah Atiyah and Samat, Noorasikin and Abang Ismawi, Dayang Habibah (2014) The effects of coupling agent on the flame retardant properties of PP/ATH nanocomposites. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME2014), 23-25 September 2014, Kuala Lumpur. (Unpublished)

Sahari, J. and Sapuan, S.M. and Zainudin, E.S. and Maleque, Md. Abdul (2014) Physico-chemical and thermal properties of starch derived from sugar palm tree (arenga pinnata). Asian Journal of Chemistry, 26 (4). pp. 955-959. ISSN 0970-7077 (P) 0975-427X (O)

Sahari, J. and Sapuan, S. M. and Zainudin, E. S. and Maleque, Md. Abdul (2014) Degradation characteristics of SPF/SPS biocomposites. Fibres & Textiles in Eastern Europe, 22 (5(107)). pp. 94-96. ISSN 1995-2014

Sahari, Japar and Sapuan, Mohd Salit and Zainudin, Edi Syams and Maleque, Md. Abdul (2014) Biodegradability and mechanical behaviour of sugar palm starch based biopolymer. American Journal of Applied Sciences, 11 (1). pp. 1836-1840. ISSN 1546-9239 E-ISSN 1554-3641

Samat, Noorasikin and Mokhtar, Wan Nur Athirah and Zulkifli, Nur Izzati (2014) Properties of eco-friendly composite from recycled polypropylene. Advances in Environmental Biology, 8 (8 (spec. issue 3)). pp. 2760-2766. ISSN 1995-0756

Samat, Noorasikin and Mokhtar, Wan Nur Athirah and Zulkifli, Nur Izzati (2014) Properties of eco-friendly composite from recycled polypropylene. In: International Conference on Plastics, Rubber and Composites (ICPRC 2014), 20th-21st June 2014, Pulau Langkawi, Malaysia. (Unpublished)

Sarifuddin, Norshahida and Ismail, Hanafi and Ahmad, Zuraida (2014) Preparation and characterization of low density polyethylene/thermoplastic sago starch/kenaf core fiber composites and their hybrid composites with halloysite clay. Advances in Environmental Biology, 8 (3). pp. 704-711. ISSN 1995-0756 E-ISSN 1998-1066

Sarifuddin, Norshahida and Ismail, Hanafi and Ahmad, Zuraida (2014) Incorporation of kenaf core fibers into low density polyethylene/thermoplastic sago starch blends exposed to natural weathering. Molecular Crystals and Liquid Crystals, 603 (1). pp. 180-193. ISSN 1542-1406 E-ISSN 1563-5287

Sarifuddin, Norshahida and Ismail, Hanafi and Ahmad, Zuraida (2014) Influence of halloysite nanotubes hybridized with kenaf core fibers on the physical and mechanical properties of low density polyethylene/thermoplastic sago starch blends. Polymer-Plastics Technology and Engineering, 53. pp. 107-113. ISSN 1525-6111 (O), 0360-2559 (P)

Seder, Amin M. F. and Al Hazza, Muataz Hazza Faizi (2014) Review on the theory of attractive quality kano model. Journal of Advanced Science and Engineering Research, 4 (2). pp. 88-102. ISSN 2231-8844

Seeni Mohamed, Nurhafizah and Anuar, Hazleen and Aimi , N. Nur and Mel, Maizirwan and Mohd Salit, Sapuan (2014) Polylactic acid-based kenaf biomass synthesized via ring opening polymerization. In: Biomass and Bioenergy Applications. Springer International Publishing, Cham; Heidelberg; New York; Dordrecht; London, pp. 211-231. ISBN 978-3-319-07577-8; 978-3-319-07578-5 (ebook)

Sopyan, Iis and C. M., Mardziah and Koay Mei, Hyie and N. R., Nik Roselina (2014) Conversion of strontium hydroxyapatite nanopowders to porous scaffolds for bone implant application. Applied Mechanics and Materials, 607. pp. 3-6. ISSN 1660-9336

Syed, Zubair Imam and Liew, Mohdshahir and Hasan, Muhammad Hasibul and Venkatesan, Srikanth (2014) Single-degree-of-freedom based pressure-impulse diagrams for blast damage assessment. Applied Mechanics and Materials, 567. pp. 499-504. ISSN 1660-9336

Tamin, M.N. and Shaffiar, Norhashimah (2014) Solder joint reliability assessment: finite element simulation methodology. Advanced Structured Materials Series, 37 . Springer International Publishing, Switzerland. ISBN 978-3-319-00091-6, 978-3-319-00092-3 (eBook)

Topa, Ameen and Shah, Qasim Hussain (2014) Failure prediction in bulk metal forming process. International Journal of Manufacturing Engineering, 2014. ISSN http://www.hindawi.com/journals/ijme/

WAY Yusoff, wan and Hadi Puwanto, purwanto and Farizahani, mohd and P.T Pham, Duc (2014) Investigation into the differences Chemical properties of Laser Sintering polymer powders using Fourier Transform Infrared Spectroscopy. In: 3rd International Conference on Manufacturing Engineering and Process, ICMEP 2014, 10-11 April 2014, Seoul.

Wan Omar, Wan Imran and Ali, Maisarah (2014) Evaluating life cycle cost and performance comparison between cold in place recycling and reconstruction method. In: Management Construction Researchers' Association Annual Conference and General Meeting (MiCRA 2014), 6th Nov 2014, Kulliyyah of Architecture and Environmental Design, IIUM. (Unpublished)

Wan Yusoff, Wan Ahmad Yusmawiza and Azrai, Muhammad and Mohamad, Ahlam Hadi (2014) Improving the design of peripheral IV therapy by employing product development approach and rapid prototyping technology. In: 3rd International Conference on Manufacturing Engineering and Process, ICMEP 2014, 10 -11 April 2014, Seoul; South Korea.

Wan Yusoff, Wan Ahmad Yusmawiza and Pham, Duc Trung and Dotchev, Krassimir (2014) Investigation of the thermal properties of different grades Polyamide 12 (PA12) in improving laser sintering process (SLS). Advanced Materials Research, 548/49. pp. 294-296. ISSN 1022-6680

Zakaria, Mohammad and Suryanto, - and Hilmy, Irfan (2014) Effects of surfactant on corrosion behavior of carbon steel in simulated eor crude oil. In: International Conference on Advances in Manufacturing and Materials Engineering 2014 (ICAMME 2014), 23rd - 25th September 2014, Sunway Putra Hotel, Kuala Lumpur. (Unpublished)

Zamani Abd Rashid, Rusila and Mohd. Salleh, Hamzah and Ani, Mohd Hanafi and Yunus, Nurul Azhani and Tomohiro, Akiyama and Purwanto, Hadi (2014) Reduction of low grade iron ore pellet using palm kernel shell. Renewable Energy, 63. pp. 617-623. ISSN 0960-1481