Items where Division is "Kulliyyah of Engineering > Department of Manufacturing and Materials Engineering" and Year is 2009

Article

, Afzeri and Sutjipto, Agus Geter Edy and Muhida, Riza and Konneh, Mohamed and ., Darmawan (2009) Remote operation of CNC milling through virtual simulation and remote dekstop interface. World Academy of Science, Engineering and Technology, 53. pp. 64-67. ISSN 1307-6884

, Pramusanto and Saleh, Nuryadi and Purwanto, Hadi (2009) The effect of magnetization on the leached limonitic ore. Indonesian Mining Journal, 12 (2). pp. 90-95. ISSN 0854-9931

-, Nor Hafizah and Sopyan, Iis (2009) Nanosized TiO2 photocatalyst powder via sol-gel method: effect of hydrolysis degree on powder properties. International Journal of Photoenergy, 2009. pp. 1-8. ISSN 1687-529X

Abd Aziz, Radhiyah and -, Nor Asyikin and Iis, Sopyan (2009) Synthesis of TiO2-SiO2 powder photocatalyst via sol-gel method: effect of titanium precursor type on powder properties. Journal of the Institution of Engineers, Malaysia, 70 (4). pp. 34-40. ISSN 0126-513X

Abd Aziz, Radhiyah and Iis, Sopyan (2009) Recent progress and development of TiO2 thin film photocatalysts for pollutant removal. Recent patents on materials science, 2 (2). pp. 88-111. ISSN 1874-4656

Abd Aziz, Radhiyah and Iis, Sopyan (2009) Synthesis SiO2-TiO2 powder and thin film photocatalyst through sol-gel. Indian journal chemistry A, 48 (7). pp. 951-957. (Unpublished)

Abd. Rahman, Mohamed and Mohd Salit, Sapuan and Mridha, Shahjahan and Abdan, Khalina (2009) Characterization of pineapple leaf fibers from selected Malaysian cultivars. Journal of Food, Agriculture & Environment, 7 (1). pp. 235-240. ISSN 1459-0263 (O), 1459-0263 (P)

Abdulkareem, Suleiman and Khan, Ahsan Ali and Mohamed , Konneh (2009) Reducing electrode wear ratio using cryogenic cooling during electrical discharge machining. International Journal of Advanced Manufacturing Technology, 45 (11-12). pp. 1146-1151. ISSN 1433-3015 (O); 0268-3768 (P)

Adesta, Erry Yulian Triblas and Riza, Muhammad and Al Hazza, Muataz Hazza Faizi and Agusman, Delvis and Yahuza, Rosehan (2009) Tool wear and surface finish investigation in high speed turning using cermet insert by applying negative rake angles. European Journal of Scientific Research, 38 (2). pp. 180-188. ISSN 1450-216X E-ISSN 1450-202X

Ahmad, Fadli and Iis, Sopyan (2009) Preparation of porous alumina for biomedical applications through protein foaming-consolidation method. Materials Research Innovations, 13 (3). pp. 327-329. ISSN 1433-075X

Ahmad Tarmizi, Nor Hafizah and Jamal, Parveen and Mohamed Ismail, Abdul Karim and Sopyan, Iis (2009) Tio2 powder photocatalyst from sol-gel route and its immobilisation with cement for photocatalytic phenol removal. Journal of the Institution of Engineers, Malaysia, 70 (4). pp. 49-56. ISSN 0126-513X

Alao, A-R and Konneh, Mohamed (2009) A response surface methodology based approach to machining processes: modelling and quality of the models. International Journal Experimental Design and Process Optimisation (IJEDPO), Vol. 1 (2/3). 240- 261 . ISSN 2040-2252 (Print); 2040-2260 (Online)

Ali, Mohammad Yeakub (2009) Fabrication of microfluidic channel using micro end milling and micro electrical discharge milling. International Journal of Mechanical and Materials Engineering (IJMME), 4 (1). pp. 93-97. ISSN 1823-0334

Ali, Mohammad Yeakub and Hamad, Mohd Hosni and Karim, Ahmad Izwan (2009) Form characterization of microhole produced by microelectrical discharge drilling. Materials and Manufacturing Processes, 24 (6). pp. 683-687. ISSN 1042-6914

Ali, Mohammad Yeakub and Mehfuz, R. (2009) Investigation of finish cut of microelectrodischarge milling for nanosurface finish. Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures, 27 (3). pp. 1330-1334. ISSN 1071-1023

Ali, Mohammad Yeakub and S.M., Ammar (2009) Effect of conventional EDM parameters on micromachined surface roughness and fabrication of hot embossing master and microtool. Materials and Manufacturing Processes, 24 (4). pp. 454-458. ISSN 1532-2475 (O), 1042-6914 (P)

Alqap, Asep Sofwan F. and Iis, Sopyan (2009) Low temperature hydrothermal synthesis of calcium phosphate ceramics: effect of excess Ca precursor on phase behavior. Indian Journal Chemistry A, 48A. pp. 1492-1500. ISSN O975-0975

Amuda, Muhammed Olawale Hakeem and Mridha, Shahjahan (2009) Microstructural features of Aisi 430 Ferritic Stainless Steel (FSS) Weld Produced under varying process parameter. International Journal of Mechanical and Materials Engineering (IJMME), 4 (2). pp. 160-166. ISSN 1823-0334

Ani, Mohd Hanafi (2009) Evolving Malaysia. The Malaysian Insider.

Ani, Mohd Hanafi and Kodama, Toshiya and Ueda, Mitsutoshi and Kawamura, Kenichi and Maruyama, Toshio (2009) The effect of water vapor on high temperature oxidation of Fe-Cr alloys at 1073K. Materials Transactions, 50 (11). pp. 2656-2663. ISSN 1347-5320 (O), 1345-9678 (P)

Ariff, Tasnim Firdaus and Gabbitas, Brian Leslie and Zhang, Deliang (2009) The effect of powder sintering method on the densification and microstructure of pewter alloys. IOP Conference Series: Materials Science and EngineeringEmail alert RSS feed, 4 (1). pp. 1-5. ISSN 1757-8981

Azhari , Mohd Azmir and Khan, Ahsan Ali and Abdullah, Rahmah (2009) Effect of abrasive water jet machining parameters on aramid fibre reinforced plastics composite. International Journal of Material Forming, 2 (1). pp. 37-44. ISSN 1960-6214 (O), 1960-6206 (P)

Bakri, Jufriadi and Sutjipto, Agus Geter Edy and Othman, Raihan and Muhida, Riza (2009) Discharge, microstructural and mechanical properties of ZrO2 addition on MgO for plasma display panel materials. Materials Research Innovations, 13 (3). pp. 149-152. ISSN 1433-075X

C. M., Mardziah and Iis, Sopyan and Ramesh, Singh (2009) Strontium-doped hydroxyapatite nanopowder via sol-gel method : effect of strontium concentration and calcination temperature on phase behavior. Trends in Biomaterials and Artificial Organs, 23 (2). pp. 105-113. ISSN 0971-1198

Ginta, Turnad Lenggo and Amin, A. K. M. Nurul and Che Daud, Mohd Radzi and Lajis, Mohd Amri (2009) Development of surface roughness models in end milling titanium alloy Ti-6Al-4V using uncoated tungsten carbide inserts. European Journal of Scientific Research, 28 (4). pp. 542-551. ISSN 1450-216X, 1450-202X

Ginta, Turnad Lenggo and Amin, A. K. M. Nurul and Lajis, Mohd Amri and Karim, A.N. Mustafizul and Che Daud, Mohd Radzi (2009) Improved tool life in end milling Ti-6A1-4V through workpiece preheating. European Journal of Scientific Research, 27 (3). pp. 384-391. ISSN 1450-216X, 1450-202X

Ginta, Turnad Lenggo and Amin, A. K. M. Nurul and Radzi, Mohd Che Daud and Lajis, Mohd Amri (2009) Tool life prediction by response surface methodology in end milling Titanium alloy Ti-6Al-4V using uncoated wc-co inserts. European Journal of Scientific Research, 28 (4). pp. 533-541. ISSN 1450-216X, 1450-202X

Ginta, Turnad Lenggo and Lajis, Mohd Amri and Amin, A. K. M. Nurul (2009) The performance of uncoated tungsten carbide insert in end milling titanium alloy Ti-6Al 4V through work piece preheating. American Journal of Engineering and Applied Sciences, 2 (1). pp. 147-153. ISSN 1941-7020

Ginta , Turnad L. and Amin, A. K. M. Nurul and Lajis, M. A. and Karim, A.N. Mustafizul and Mohd Radzi, H.C.D. (2009) Improved tool life in end milling ti-6al-4v through workpiece preheating. European Journal of Scientific Research, 27 (3). pp. 384-391. ISSN 1450-216X, 1450-202X

Hata, Yuichi and Purwanto, Hadi and Hosokai, Sou and Hayashi, Jun-ichiro and Kashiwaya, Yoshiaki and Akiyama, Tomohiro (2009) Biotar ironmaking using wooden biomass and nanoporous iron ore. Energy & Fuels, 23 (2). pp. 1128-1131. ISSN 0887-0624

Iis, Sopyan and A.N., Natasha (2009) Preparation of nano-structured manganese doped-biphasic calcium phosphate powders via sol-gel method. IONICS (Spinger), 15. pp. 735-741. ISSN 1862-0760

Iis, Sopyan and Jasminder, Kaur (2009) Preparation and characterization of porous hydroxyapatite through polymeric sponge method. Ceramics International, 35 (8). pp. 3161-3168. ISSN 0272-8842

Khan, Ahsan Ali and Ali, Mohammad Yeakub and Haque, Md. Mohafizul (2009) A study of electrode shape configuration on the performance of die sinking EDM. International Journal of Mechanical and Materials Engineering, 4 (1). pp. 19-23. ISSN 1823-0334

Khan, Ahsan Ali and Mridha, Shahjahan and Ali, Mohammad Yeakub (2009) Cryogenic grinding of mild steel and stainless steel. International Journal for manfacturing Science and Production, 10 (1). pp. 69-74. ISSN 2191-0375 (O); 0793-6648 (P)

Lajis, Mohd Amri and Amin, A. K. M. Nurul and Karim, A.N. Mustafizul and Che Daud, Mohd Radzi and Ginta, Turnad Lenggo (2009) Hot machining of hardened steels with coated carbide inserts. American Journal of Engineering and Applied Sceices, 2 (2). pp. 421-427. ISSN 1941-7020

Lajis, Mohd Amri and Che Daud, Mohd Radzi and Amin, A. K. M. Nurul (2009) The implementation of Taguchi method on EDM process of Tungsten Carbide. European Journal of Scientific Research, 26 (4). pp. 609-617. ISSN 1450-216X , 1450-202X

M. A., Amir and Khan, Ahsan Ali (2009) A study of abrasive water jet machining process on glass/epoxy composite laminate. Journal of Materials Processing Technology, 209 (20). pp. 6168-6173. ISSN 0924-0136

M.M., Rahman and A.K., Ariffin and M.M., Noor and A.B., Rosli and M.A., Maleque (2009) Assessment of surface treatment on fatigue life of cylinder block for linear engine using frequency response approach. American Journal of Applied Sciences , 6 (4). pp. 715-725. ISSN 1546-9239

Maleque, Md. Abdul and Karim, Md. Rezaul (2009) Wear behavior of as-cast and heat treated triple particle size SiC reinforced aluminium metal matrix composites. Industrial Lubrication and Tribology, 61 (2). pp. 78-83. ISSN 0036-8792

Mehfuz, Reyad and Ali, Mohammad Yeakub (2009) Investigation of machining parameters for the multiple response optimization of micro electrodischarge milling. International Journal of Advanced Manufacturing Technology, 43 (3). pp. 264-275. ISSN 1433-3015 (O); 0268-3768 (P)

Mehfuz, Reyad and Ali, Mohammad Yeakub (2009) Investigation of machining parameters for the multiple-response optimization of micro electrodischarge milling. The International Journal of Advanced Manufacturing Technology, 43 (3-4). pp. 264-275. ISSN 0268-3768

Mohammad, Yeakub Ali and Khan, Ahsan Ali and Hamzah, Munirah and Khalid, Nor Azura (2009) Study of material removal rate and electrode wear ratio for micro electrical discharge milling of AISI 420 and Stavax ESR. International Journal of Mechanical and Materials Engineering (IJMME), 4 (3). pp. 300-308. ISSN 1823-0334

Muhida, Riza and Ali, Maisarah and Jahn Kassim, Puteri Shireen and Abu Eusuf, Muhammad and Sutjipto, Agus Geter Edy and ., Afzeri (2009) A simulation method to find the optimal design of photovoltaic home system in Malaysia, case study: a building integrated photovoltaic in Putra Jaya. World Academy of Science, Engineering and Technology, 53. pp. 694-698. ISSN 1307-6884

Muhida, Riza and Sutjipto, Agus Geter Edy and ., Afzeri and Toyama, T. and Okamoto, Hiroaki (2009) Relationship between average slope of textured substrate and poly-Si thin film solar cells performance. Materials Research Innovations, 13 (3). pp. 246-248. ISSN 1433-075X

Patwari, Muhammed Anayet Ullah and Amin, A. K. M. Nurul and Faris, Waleed Fekry (2009) Mathematical model for the prediction of chip serration frequency in end milling of steel AISI1020. Tome VII, 1. pp. 89-96. ISSN 1584-2665

Patwari, Muhammed Anayet Ullah and Amin, A. K. M. Nurul and Faris, Waleed Fekry (2009) Prediction of tangential cutting force in end milling of medium carbon steel by coupling design of experiment and response surface methodology. Journal of Mechanical Engineering, 40 (2). pp. 95-103. ISSN 0379-4318

Patwari, Muhammed Anayet Ullah and Faris, Waleed Fekry and Amin, A. K. M. Nurul and Loh, S. K. (2009) Characterisation of dynamic behaviour of vertical machining centre components: experimental and simulation approaches. International Journal of Engineering Systems Modelling and Simulation, 1 (4). pp. 231-241. ISSN 1755-9766

Patwari, Muhammed Anayet Ullah and Faris, Waleed Fekry and Amin, A. K. M. Nurul and Loh, S.K. (2009) Dynamic modal analysis of vertical machining centre components. Advances in Acoustics and Vibration, 2009 (508076). pp. 1-10. ISSN 1687-6261

Rahman, Md. Mustafizur and Mohd. Ihsan, Ahmad Kamal Ariffin and Abdullah, Shahrir and Mat Noor, Muhamad and Abu Bakar, Rosli and Maleque, Md. Abdul (2009) Assessment on surface treatment on fatigue life of cylinder block for linear engine using frequency response approach. American Journal of Applied Sciences , 6 (4). pp. 715-725. ISSN 1554-3641(O), 1546-9239 (P)

Samat, Noorasikin and Burford, Robert and Whittle, Alan and Hoffman, Mark (2009) The effects of frequency on fatigue threshold and crack propagation rate in modified and unmodified polyvinyl chloride. Polymer Engineering and Science, 49 (7). 1299 -1310. ISSN 1548-2634

Sopyan, Iis and Natasha, A. N. (2009) Preparation of nanostructured manganese-doped biphasic calcium phosphate powders via sol–gel method. Ionics, 15 (6). pp. 735-741. ISSN 0947-7047

Toque, Jay Arre and M., Hamdi and A., Ide-Ektessabi and Iis, Sopyan (2009) Effect of the processing parameters on the integrity of calcium phosphate coatings produced by RF-magnetron sputtering. International Journal of Modern Physics B, 23 (31). pp. 5811-5818. ISSN 0217-9792 ; 1793-6578

Triwiyanto, A. and Mridha, Shahjahan and Haruman, Esa and Sudin, M.Min (2009) Thermochemical treatments of autstenitic stainless in fluidised bed furnace for improved mechanical and ribological properties. International Journal of Mechanical and Materials Engineering, 4 (2). pp. 98-104.

Turnad L., Ginta and A.K.M., Nurul Amin and H.C.D., Mohd. Radzi and Mohd. Amri, Lajis (2009) Tool life prediction by response surface methodology in end milling titanium alloy Ti-6A1-4V using uncoated WC-Co inserts. European Journal of Scientific Research, 28 (4). pp. 533-541. ISSN 1450-216X, 1450-202X

Book

Mridha, Shahjahan and Ali, Mohammad Yeakub and Afzeri, Afzeri, eds. (2009) Book of abstracts: The International Conference on Advances in Materials and Processing Technologies (AMPT 2009). Kulliyyah of Engineering, International Islamic University Malaysia, Kuala Lumpur.

Proceeding Paper

Al-Bat’hi Mohamad, Souad and Basirun, W. J. and Ibrahim, Z. A. and Arof, A. K. (2009) Controlled potential electrodeposition and characterization of ZNTE thin films on indium tin oxides. In: International Conference on Advance Materials and Processing Technology AMPT 2009, 26-29 October 2009, Kuala Lumpur Malaysia. (Unpublished)

Ali, Mohammad Yeakub and Khan, Ahsan Ali and Othman, Khairul Irman and Omar, Mohd Aliff (2009) Micro end milling of AISI 304 stainless steel and analysis of micro surface roughness. In: Proceedings of the 2009 International Conference on Mechanical and Electrical Technology (ICMET'09), 8 - 11 August 2012, Beijing.

Ali, Mohammad Yeakub and Omar, Mohd Aliff and Othman, Khairul Irman and Hung, Wayne N.P. (2009) Prediction of burr formation in fabricating MEMS components by micro end milling. In: International Conference on Materials for Advanced Technologies (ICMAT), 28 June - 03 July, Singapore.

Cetiner, Beytullah Gultekin and Ismail, Ahmad Faris and Hassan, Azmi (2009) Ontology of manufacturing enginneering. In: 5th International Advanced Technologies Symposium (IATS'09), 13 - 15 May, 2009, Karabuk, Turkey.

Cetiner, Beytullah Gultekin and Sari, Murat and Aburas, Hani M. (2009) Recognition of dengue disease patterns using artificial neural networks. In: 5th International Advanced Technologies Symposium (IATS'09), 13-15 May, 2009, Karabuk, Turkey.

Ginta, Turnad Lenggo and Amin, A. K. M. Nurul and Karim, A.N. Mustafizul and Lajis, M. A. (2009) Surface roughness and surface integrity of end milled titanium alloy TI-6AL-4V at room temperature and preheated machining. In: International Conference on Advances in Materials & Processing Technology (AMPT 2009), 26-29 Oct., 2009, Kuala Lumpur.

Ginta, Turnad Lenggo and Karim, A.N. Mustafizul and Amin, A. K. M. Nurul and Lajis, M. A. (2009) Surface roughness models for end milling titanium alloy TI-6AL-4V under room temperature and preheated machining. In: International Conference on Advances in Materials & Processing Technology (AMPT 2009), 26-29 Oct., 2009, Kuala Lumpur.

H. H. , Hairuddin and S., Muddath and Anuar, Hazleen and N. A, Jamal (2009) Preliminary studies of rubber toughened polypropylene - kenaf fiber composite. In: 4th International Conference on Recent Advabces in Materials, Minerals & Environment and 2nd Asian Symposium on Material and Processing, 1st - 3rd June 2009, Penang, Malaysia.

Haque, Md. Mohafizul and Amir, Adibah and Ismail, Ahmad Faris (2009) Investigation on tribological properties on strontium modified piston alloy under lubricated condition. In: International Conference on Advances on Materials and Processing Technologies (AMPT 2009), 26-29 Oct., 2009, Kuala Lumpur.

Haque, Md. Mohafizul and Ismail, Ahmad Faris and Alias, Tuti Yasmin (2009) Selection of materials and manufacturing processes for green engineering. In: International Conference on Advances on Materials and Processing Technologies( AMPT 2009), 26-29 Oct., 2009, Kuala Lumpur.

Karim, A.N. Mustafizul and Saad, Mohd Fadli (2009) Development of a pilot-scale web-based inventory management system foe lab equipment and consumables. In: International Conference on Advances in Materials & Processing Technology (AMPT 2009), 26-29 Oct., 2009, Kuala Lumpur.

Konneh, Mohamed and Amin, A. K. M. Nurul and Afzeri, Afzeri and Ahmarofi, A. A. (2009) Development of a low cost lapping process. In: International Conference on Advances in Materials & Processing Technology (AMPT 2009), 26-29 Oct., 2009, Kuala Lumpur.

Mel, Maizirwan and Abdeen, Fouad and Sopyan, Iis (2009) Fabrication of ceramic membrane chromatography for biologics purification. In: Advanced materials and Processing Technologies, 26-29 October 2009, Kuala Lumpur.

Mohamad, Souad A. and Basirun, W. J. and Ibrahim, Z. A. and Arof, Abdul Kariem and Ebadi, Mehdi (2009) Structure and optical characterization of electrodeposited zinc selenide thin films. In: International Conference on Advances in Materials and Processing Technologies (AMPT 2009), 26-29 October 2009, Kuala Lumpur. (Unpublished)

Patwari, Muhammed Anayet Ullah and Amin, A. K. M. Nurul and Faris, Waleed Fekry (2009) Statistical approach for the development of tangential cutting force model in end milling of Ti6Al4V. In: International Conference on Advances in Materials and Processing Technologies (AMPT 2009), 26-29 October 2009, Kuala Lumpur.

Patwari, Muhammed Anayet Ullah and Amin, A. K. M. Nurul and Faris, Waleed Fekry and Azhari, Marian and Farahain, S (2009) Chip serration frequency-the primary cause of chatter during end milling operation. In: International Conference on Advances in Materials & Processing Technology (AMPT 2009), 26-29 Oct., 2009, Kuala Lumpur.

Patwari, Muhammed Anayet Ullah and Faris, Waleed Fekry and Amin, A. K. M. Nurul and Loh, S. K. (2009) Finite element and experimental analysis of dynamic behaviour of Vertical Machining Centre Components by Modal Analysis. In: Advanced Materials for Application in Acoustics and Vibration, 4-6 January 2009, Cairo, Egypt.

Sarker, Dyuti and Mridha, Shahjahan (2009) Formation of Tin coating layer on steel surface by powder preplacement and TIG torch melting techniques. In: Kulliyyah of Engineering Kerie 2009 Research and Innovation Exhibition (KERIE); Programme book, 2009, IIUM.

Sopyan, Iis (2009) Artificial bone as an alternative solution for halal bone implants. In: World Halal Research Summit 2009, 7 - 8 May, 2009, Kuala Lumpur. (Unpublished)

Wan Yusoff, Wan Ahmad Yusmawiza and Pham, D. T. and Dotchev, K. (2009) Effect of employing different grades of recycled polyamide 12 on the surface texture of laser sintered (LS) parts. In: International Conference on Advances in Materials & Processing Technology (AMPT 2009), 26-29 Oct., 2009, Kuala Lumpur.

Wan Yusoff, Wan Ahmad Yusmawiza and Sa’edun, Mohamad and Afiq, Faidhi (2009) The application of rapid prototyping technology and FMEA quality tool in the development of automotive component. In: International Conference on Advances in Materials & Processing Technology (AMPT 2009), 26-29 Oct., 2009, Kuala Lumpur.

Wan Yusoff, Wan Ahmad Yusmawiza and Syazmi, Khairil and Mohd Naeem, Saripan (2009) Investigation on mechanical properties of ABS using rapid rpototyping technology and injection molding process. In: International Conference on Advances in Materials & Processing Technology (AMPT 2009), 26-29 Oct., 2009, Kuala Lumpur.

Wan Yusoff, Wan Mohd Yusmawiza and Md Zain, Mohd Izzuan and Kamasan, Muhammad Asrul and Nor Aman, Zuraida (2009) Rapid prototyping in Malaysia. In: International Conference on Advances in Materials & Processing Technology (AMPT 2009), 26-29 Oct., 2009, Kuala Lumpur.

Monograph

Ali, Mohammad Yeakub (2009) Development of micro end milling process for fabricating MEMS. Research Report. International Islamic University Malaysia, Kuala Lumpur. (Unpublished)