Items where Division is "Kulliyyah of Engineering > Department of Mechanical Engineering" and Year is 2023

Article

A., Shamitha and Crasta, Asha and Pathan, Khizer Ahmed and Khan, Sher Afghan (2023) Analytical and numerical simulation of surface pressure of an oscillating wedge at hypersonic Mach numbers and application of Taguchi's method. Journal of Advanced Research in Applied Sciences and Engineering Technology, 30 (1). pp. 15-30. ISSN 2462-1943

Aabid, Abdul and Baig, Muneer and Hrairi, Meftah (2023) Advanced composite materials for structural maintenance, repair, and control. Materials, 16 (2). pp. 1-3. ISSN 1996-1944

Aabid, Abdul and Hrairi, Meftah and Syed Mohamed Ali, Jaffar and Ibrahim, Yasser E. (2023) Review of piezoelectric actuator applications in damaged structures: challenges and opportunities. ACS Omega, 8 (3). pp. 2844-2860. ISSN 2470-1343

Aabid, Abdul and Ibrahim, Yasser and Hrairi, Meftah and Jaffar Syed, Mohamed Ali (2023) Optimization of structural damage repair with single and double-sided composite patches through the finite element analysis and Taguchi method. Materials, 16 (4). pp. 1-14. ISSN 1996-1944

Abdullah, Muhammad and Zainuddin, Mohamed Al-Sideque and Ahmad, Salmiah and Rossiter, John Anthony (2023) Performance comparison between centralized and hierarchical predictive functional control for adaptive cruise control application. International Journal of Automotive and Mechanical Engineering, 20 (4). pp. 10808-10820. ISSN : 2229-8649 E-ISSN 2180-1606

Abdullah Hashim, Azrul Azim and Ahmad, Salmiah and Abdul Ghani, Nor Maniha and Nasir, Ahmad Nor Kasruddin (2023) Integrated modelling and control of linear actuator based automatic pedal pressing mechanism for low-speed driving in a road traffic delay. International Journal of Robotics and Control Systems, 3 (3). pp. 485-500. E-ISSN 2775-2658

Ahmed Khan, Shaheer and Rahman, Mohammed Ataur and Khan, Wajahat and Haider, Syed Mustafa (2023) Characterization and application of nano-composite zinc oxide/poly vinyl alcohol thin-film in solar cell performance enhancement. Journal of Mechanical Science and Technology, 37 (10). pp. 1-7. ISSN 1738-494X E-ISSN 1976-3824

Akhlaq, Adnan and Shaik Dawood, Mohd. Sultan Ibrahim and Jaffar Syed, Mohamed Ali and Sulaeman, Erwin (2023) A study on the effect of piezoelectric nonlinearity on the bending behaviour of smart laminated composite beam. Materials, 16 (7). pp. 1-19. E-ISSN 1996-1944

Al Mahmud, Suaib and Ismail, Ahmad Faris and Bappy, Jamirul Habib and Noor, Wazed Ibne (2023) A study on accuracy range of multiphase mixture model for turbulent convective heat transfer enhancement simulation of Water-Al2O3 Nanofluid. Journal of Nanofluids, 12 (2). pp. 438-447. ISSN 2169-432X E-ISSN 2169-4338

Alam, Jubayer Abdullah Rafiul and Abu Talib, Abd Rahim and Altarazi, Yazan Sofyan Mohammed and Yusaf, Talal and Azami, Muhammad Hanafi and Nik Mohd, Nik Ahmad Ridhwan (2023) Experimental investigation on gas turbine engine performance using alternative fuel. Journal of Aeronautics, Astronautics and Aviation,, 55 (3S). pp. 479-483. ISSN 1990-7710

Alam, Mohammad Shafiul and Tasneem, Zabina and Khan, Sher Afghan and Rashid, Muhammad Mahbubur (2023) Effect of different modalities of facial images on ASD diagnosis using deep learning-based neural network. Journal of Advanced Research in Applied Sciences and Engineering Technology, 32 (3). pp. 59-74. ISSN 2462-1943

Anjum, Asraar and Shaikh, Abdul Aabid and Hrairi, Meftah (2023) Analysis of damage control of thin plate with piezoelectric actuators using finite element and machine learning approach. Frattura ed Integrita Strutturale, 17 (66). pp. 112-126. E-ISSN 1971-8993

Ayop Azmi, Nurnajmin Qasrina Ann and Pebrianti, Dwi and Abas, Mohammad Fadhil and Bayuaji, Luhur (2023) Automated-tuned hyper-parameter deep neural network by using arithmetic optimization algorithm for Lorenz chaotic system. International Journal of Electrical and Computer Engineering (IJECE), 13 (2). pp. 2167-2176. ISSN 2088-8708 E-ISSN 2722-2578

Azami, Muhammad Hanafi (2023) Starship bukti kemajuan teknologi aeorangkasa dunia. Berita Harian.

Balamurugan, K. and Shanmugam, Vigneshwaran and Palani, Geetha and Sundarakannan, R. and Sathish, T. and Linul, Emanoil and Khan, Sher Afghan and Asif, Mohammad (2023) Effect of TiC/RHA on solid particle erosion of Al6061 hybrid composites fabricated 2 through a 2-step ultrasonic-assisted stir casting process. Journal of Materials Research and Technology, 01473 (4). pp. 1-35. ISSN 2238-7854

Bashir, Musavir and Parvathy, Rajendran and Khan, Ambareen and Vijayanandh, Raja and Khan, Sher Afghan (2023) Numerical investigation of turbulence models with emphasis on turbulent intensity at low Reynolds number flows. Advances in Aircraft and Spacecraft Science, 10 (4). pp. 1-13. ISSN 2287-528X E-ISSN 2287-5271

Beroual, Sabir and Hrairi, Meftah (2023) Electromechanical impedance simulation-based evaluation of cracks in photovoltaic solar cells. Arabian Journal for Science and Engineering. pp. 1-17. ISSN 2193-567X E-ISSN 2191-4281

Boughou, Smail and Omar, Ashraf Ali and Elsayed, Omer Ali and Mohammed Aldheeb, Mohammed Abdulmalek (2023) Numerical investigation on the aerodynamics of high-lift and bird-like low Reynolds number airfoils. Progress in Computational Fluid Dynamics, 23 (3). pp. 146-162. ISSN 1468-4349 E-ISSN 1741-5233

Elagib, Tienah H. H. and Kabbashi, Nassereldeen Ahmed and Alam, Md. Zahangir and Al-Khatib, Ma'an Fahmi Rashid and Mirghani, Mohamed Elwathig Saeed and Hassan, Elwathig A. M. (2023) The performance of heteroatom-doped carbon nanotubes synthesized via a hydrothermal method on the oxygen reduction reaction and specific capacitance. Journal of Electrochemical Science and Engineering, Nanomaterials Special Issue. pp. 1-14. ISSN 1847-9286

Fayaz, Hussain and Shaik, Saboor and Khan, Sher Afghan and Huynh, Van Van and Jilte, Ravindra D. and Sundara, Vikram and Asif, Mohammad and Linul, Emanoil (2023) Transient solidification and melting numerical simulation of lauric acid PCM filled stepped solar still basin used in water desalination process. Case Studies in Thermal Engineering, 49. pp. 1-16. E-ISSN 2214-157X

Hassan, Mohamed Ibren and Andan, Amelda Dianne and Asrar, Waqar and Aldheeb, Mohammed and Saad, Mohd Rashdan (2023) Experimental Investigation of Low Reynolds Number Flow Around a Serrated NACA 0015 Airfoil. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 112 (2). pp. 137-160. ISSN 2289-7879

Hassan, Mohamed Ibren and Andan, Amelda Dianne and Asrar, Waqar and Mohammed Sapardi, Mohd Azan (2023) Large Eddy simulation of low Reynolds number flow around a NACA0015 airfoil with modified trailing edges. Journal of Advanced Research in Applied Mechanics, 112 (1). pp. 57-79. ISSN 2289-7895

Husnina, Nur and Khan, Sher Afghan and Aabid, Abdul and Baig, Muneer and Shaiq, Istiyaq Mudassir (2023) Passive control of base pressure in a converging-diverging nozzle with area ratio 2.56 at mach 1.8. Fluid Dynamics and Manufacturing Process, 19 (3). pp. 569-577. ISSN 1555-256X E-ISSN 1555-2578

Ideris, Muhammad Haziq and Kamaruddin, Shafie and Sulaiman, Mohd Hafis and Sukindar, Nor Aiman and Ahmad Azhar, Ahmad Zahirani and Md Yasir, Ahmad Shah Hizam (2023) Effects of coating and lubrication on friction and wear for metal-to metal application. Journal of Advanced Research in Applied Mechanics, 110 (1). pp. 52-62. E-ISSN 2289-7895

Iftekar, Syed Fouzan and Sukindar, Nor Aiman and Amir, Adibah and Azami, Muhammad Hanafi and Aabid, Abdul (2023) Enhancing metal 3D printing with fused deposition modeling - a short review. International Journal of Research and Analytical Reviews (IJRAR), 10 (2). pp. 424-428. ISSN 2349-5138 E-ISSN 2348-1269

Islam, Maidul and Abdullah, Muhammad and Abdul Ghaffar, Alia Farhana and Ahmad, Salmiah (2023) Comparison analysis between PI and adaptive controllers for DC-DC converter of hybrid energy storage systems in electric vehicles. International Journal of Automotive and Mechanical Engineering, 20 (3). pp. 10659-10670. ISSN 2229-8649 E-ISSN 2180-1606

Jilte, Ravindra and Afzal, Asif and Ağbulut, Ümit and Shaik, Saboor and Khan, Sher Afghan and Linul, Emanoil and Asif, Mohammad (2023) Battery thermal management of a novel helical channeled cylindrical Li-ion battery with nanofluid and hybrid nanoparticle-enhanced phase change material. International Journal of Heat and Mass Transfer, 216 (124547). pp. 1-18. ISSN 0017-9310

Kabbashi, Nassereldeen Ahmed and Ihsan, Sany Izan and Hassan Abdalla Hashim, Aisha (2023) Integration of knowledge at the Kulliyyah of Engineering. International Journal on Integration of Knowledge, 1 (1). pp. 40-51.

Kardile, Balasaheb Annasaheb and Pathan, Khizar Ahmed and Auti, Abhijeet Bhikashet and Khan, Sher Afghan (2023) Simulation of energy dissipation in BLDC Motor and analysis of speedacoustic characteristics. Journal of Advanced Research in Applied Mechanics, 111 (1). pp. 38-61. ISSN 2289-7895

Karthick, C. and Chatterjee, Dipankar and Gupta, Nidhish and Saxena, Prakhar and Sivagami, K. and Jeevanantham, A. K. and Kasianantham, Nanthagopal and Shaik, Saboor and Asif, Mohammad and Khan, Sher Afghan and Ağbulut, Ümit (2023) Environmental, combustion, and performance investigation of low viscous biofuel in port fuel injection spark‑ignition engine. Journal of Thermal Analysis and Calorimetry. pp. 1-22. ISSN 1588-2926 E-ISSN 1388-6150

Khan, Huma and Khatoon, Shahida and Gaur, Prerna and Abbas, Mohamed and Saleel, Chanduveetil Ahamed and Khan, Sher Afghan (2023) Speed control of wheeled mobile robot by nature-inspired social spider algorithm-based PID controller. Processes, 11 (4). pp. 1-21. E-ISSN 2227-9717

Krishnamoorthy, Ramalingam and Vellaiyan, Suresh and Venkatesan, Elumalai Perumal and Khan, Sher Afghan and Zakariya, Mahmoud and Saleel, Chanduveetil Ahamed (2023) Challenges and opportunities of Low Viscous Biofuel- a prospective review. ACS omega. pp. 1-16. ISSN 2470-1343

Kumar, K. Sunil and Kalos, Pritam Suryaprakash and Akhtar, Mohammad Nishat and Shaik, Saboor and Sundara, Vikram and Fayaz, H. and Khan, Sher Afghan and Asif, Mohammad (2023) Experimental and theoretical analysis of exhaust manifold by uncoated and coated ceramics (Al2O3, TiO2 and ZrO2). Case Studies in Thermal Engineering, 50. pp. 1-17. E-ISSN 2214-157X

Kurniawan, Syifa and Pebrianti, Dwi (2023) Optimization study of the ratio of bioethanol bioaceton ron 90 on the power and emissions of a 110cc gasoline motor. Asian Journal Science & Technology, 2 (1). pp. 22-30. ISSN 2963-6752

Mohamad Jamil, Nur Arifah and Mohamaddiah, Ahmad Hadi and Azami, Muhammad Hanafi and Nordin, Norhuda Hidayah (2023) High entropy alloy as metal additive for hybrid rocket propellant. Materials Today: Proceedings, 75 (Part 1 (January 2023)). pp. 140-146. E-ISSN 2214-7853

Mohd Ali, Mohd Aizat Iz’aan and Razali, Muhammad Farhan and Azami, Muhammad Hanafi and Abdul Hamid, Ahmad Hussein (2023) Investigation on nozzle throat erosion in hybrid rocket motor due to nozzle expansion ratio. Journal of Aerospace Society Malaysia, 1 (2). pp. 1-8. E-ISSN 3009-0520

Mohd Zain, Zakaria and Rashid, Mir Akmam Noor and Khan, Sher Afghan and Khan, Ahsan Ali (2023) Analysis and modeling of surface roughness in powder mix EDM and pure EDM using central composite design. Journal of Advanced Research in Applied Sciences and Engineering Technology, 30 (1). pp. 243-254. ISSN 2462-1943

Mohd Zain, Zakaria and Rashid, Mir Akmam Noor and Khan, Sher Afghan and Khan, Ahsan Ali (2023) MRR and TWR study of powder mix EDM and pure EDM based on response surface methodology. Journal of Advanced Research in Applied Mechanics, 103 (1). pp. 13-26. ISSN 2289-7895

Motakabber, S. M. A. and Hoque, Md. Mominul and Islam, Md. Rafiqul and Ihsan, Sany Izan and Islam, Gazi Zahirul and Zahirul Alam, A. H. M. (2023) MATLAB-based vibration signal processing for fault diagnosis. Asian Journal of Electrical and Electronic Engineering (AJoEEE), 3 (2). pp. 27-32. E-ISSN 2785-8189

Muhammad Yuhendri, Yoga Farhans and Nik Mohd, Nik Ahmad Ridhwan and Mat, Shabudin and Mohd Nasir, Mohd Nazri and Othman, Norazila and Mohd Rafie, Azmin Shakrine and Azami, Muhammad Hanafi (2023) Impact of cowl deflections on scramjet intake aerodynamics with shock-on-lip condition. Journal of Aeronautics, Astronautics and Aviation, 55 (3S). pp. 461-468. ISSN 1990-7710

Nur Huda, Arif and Pebrianti, Dwi and Md Zain, Zainah (2023) Integrated robotic arm control: inverse kinematics, trajectory planning, and performance evaluation for automated welding. Asian Journal Science and Engineering, 2 (2). pp. 82-100. ISSN 2963-6752

Othman, Ahmad Al Baqir and Ahmad, Salmiah and Badron, Khairayu and Altalmas, Tareq M. K. (2023) Identifying the correct articulation point of a Quranic letters of the throat (al-halqu) makhraj. PERINTIS eJournal, 13 (2). pp. 40-64. ISSN 2232-0725

Pathan, Khizar Ahmed and Chaudhary, Zakir Ilahi and Attar, Ajaj Rashid and Khan, Sher Afghan and Khan, Ambareen (2023) Optimization of Nozzle Design for Weight Reduction using Variable Wall Thickness. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 112 (2). pp. 86-101. ISSN 2289-7879

Pebrianti, Dwi and Suhaimi, Muhammad Syafiq and Hossain, Md. Jobaher and Bayuaji, Luhur (2023) Exploring micro aerial vehicle mechanism and controller design using Webots simulation. Journal of Mechatronics and Intelligent Manufacturing (Mekatronika), 5 (2). pp. 41-49. E-ISSN 2637-0883

Quadros, Jaimon Dennis and Khan, Sher Afghan and Aabid, Abdul and Baig, Muneer (2023) Modeling and validation of base pressure for aerodynamic vehicles based on machine learning models. Computer Modeling in Engineering & Sciences, 137 (3). pp. 2331-2352. ISSN 1526-1492 E-ISSN 1526-1506

Quadros, Jaimon Dennis and Khan, Sher Afghan and T., Prashanth (2023) Experimental and numerical investigation of expansion corner effects on isolator performance. International Journal of Turbo & Jet Engines, Ahead of print. pp. 1-8. ISSN 0334-0082 E-ISSN 2191-0332

Rahman, Mohammed Ataur and Aung, Kyaw Myo and Ihsan, Sany Izan and Raja Ahsan Shah, Raja Mazuir and Al Qubeissi, Mansour and T. Aljarrah, Mohannad (2023) Solar energy dependent supercapacitor system with ANFIS controller for auxiliary load of electric vehicle. Energies, 16 (6). pp. 1-25. ISSN 1996-1073

Ramachandran, Elumalai and Krishnaiah, Ravi and Perumal Venkatesan, Elumalai and Medapati, Sreenivasa Reddy and Sabarish, Rajagopalan and Khan, Sher Afghan and Asif, Mohammad and Linul, Emanoil (2023) Experimental studies to reduce usage of fossil fuels and improve green fuels by adopting hydrogen−ammonia−biodiesel as trinary fuel for RCCI engine. ACS omega, 9 (1). A-J. E-ISSN 2470-1343

Ramachandran, Elumalai and Krishnaiah, Ravi and Venkatesan, Elumalai Perumal and Parida, Satyajeet and Dwarshala, Siva Krishna Reddy and Khan, Sher Afghan and Asif, Mohammad and Linul, Emanoil (2023) Prediction of RCCI combustion fueled with CNG and algal biodiesel to sustain efficient diesel engines using machine learning techniques. Case Studies in Thermal Engineering (103630). pp. 1-38. E-ISSN 2214-157X

Ramesh, Kumar R and Karthik, K and Elumalai, P.V. and Alshahrani, Saad and Ağbulut, Ümit and Saleel, C Ahamed and Shaik, Saboor and Khan, Sher Afghan (2023) Investigation of Nano composite heat exchanger annular Pipeline flow using CFD analysis for Crude Oil and Water Characteristics. Case Studies in Thermal Engineering, 49. pp. 1-23. ISSN 2214-157X

Ridwan, R and Khan, Sher Afghan and Syed Mohamed Ali, Jaffar and Sapardi, Mohd Azan Mohammed and Aabid, Abdul (2023) Numerical analysis of cavity-based control of base pressure variations at supersonic Mach numbers. Fluid Dynamics & Materials Processing, 23 (3). pp. 1-23. ISSN 1555-256X E-ISSN 1555-2578

Sabri, Muhammad Ezamuddin Ezzad and Azami, Muhammad Hanafi and Abdullah, Nur Azam and Nordin, Norhuda Hidayah (2023) Investigation of regression rate end-burning typed hybrid rocket motor. Journal of Aeronautics, Astronautics and Aviation, 55 (3S). pp. 485-494. ISSN 1990-7710

Sabri, Muhammad Ezamuddin Ezzad and K., Togashi and Azami, Muhammad Hanafi (2023) Numerical analysis of fuel regression rate in Hybrid Rocket Motor with star shape port fuel grain. Perintis e-Journal, 13 (2). pp. 9-18. ISSN 2232-0725 E-ISSN 2232-0725

Sathish, T and Pelluru, Suresh and Sharma, Kamal and Saravanan, R. and Saleel, C Ahamed and Shaikh, Saboor and Khan, Sher Afghan and Panchal, Hitesh (2023) Zero emission /energy building heating through parabolic dish collector focused KNO3–NaNO3 and KNO3–NaNO3–NaNO2 PCM absorber: a case study. Case Studies in Thermal Engineering, 44 (102854). pp. 1-10. ISSN 2214-157X

Shabbir Ahmed, Omar and Aabid, Abdul and Syed Mohamed Ali, Jaffar and Hrairi, Meftah and Mohd Yatim, Norfazrina Hayati (2023) Buckling analysis of a thin-walled C-section channel under mechanical and thermal load. Journal of Advanced Research in Applied Mechanics, 109 (1). pp. 1-16. E-ISSN 2289-7895

Shabbir Ahmed, Omar and Aabid, Abdul and Syed Mohamed Ali, Jaffar and Hrairi, Meftah and Mohd Yatim, Norfazrina Hayati (2023) Progresses and challenges of composite laminates in thin-walled structures: a systematic review. ACS Omega, 8 (34). pp. 30824-30837. E-ISSN 2470-1343

Shaik, Saboor and Vigneshwaran, Pethurajan and Roy, Abin and Kontoleon, Karolos J. and Mazzeo, Domenico and Cuce, Erdem and Saleel, C Ahamed and Alwetaishi, Mamdooh and Khan, Sher Afghan and Gürel, Ali Etem and Ağbulut, Ümit (2023) Experimental analysis on the impacts of soil deposition and bird droppings on the thermal performance of photovoltaic panels. Case Studies in Thermal Engineering, 48. pp. 1-11. ISSN 2214-157X

Shaikh, Javed S. and Kumar, Krishna and Pathan, Khizar A. and Khan, Sher Afghan (2023) Computational analysis of surface pressure distribution over a 2D wedge in the supersonic and hypersonic flow regimes. Fluid Dynamics and Materials Processing, 19 (6). pp. 1637-1653. ISSN 1555-256X E-ISSN 1555-2578

Shamitha, A and Crasta, Asha and Khan, Sher Afghan (2023) Evaluation of derivative in damping in the Newtonian limit for non-planar wedge. Materials Today. pp. 1-3. ISSN 2214-7853

Shamitha, Shamitha and Crasta, Asha and Pathan, Khizar Ahmed and Khan, Sher Afghan (2023) Numerical simulation of surface pressure of a wedge at supersonic Mach numbers and application of design of experiments. Journal of Advanced Research in Applied Mechanics, 101 (1). pp. 1-18. E-ISSN 2289-7895

Sheikh, Javed S and Pathan, Khizar Ahmed and Kumar, Krishna and Khan, Sher Afghan (2023) Effectiveness of cone angle on surface pressure distribution along slant length of a cone at hypersonic mach numbers. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 104 (1). pp. 185-203. ISSN 2289-7879

Syed Abd Rahman AlQudsy, Sharifah Nadhirah and Syed Mohamed Ali, Jaffar and Shaik Dawood, Mohd. Sultan Ibrahim and Rosli, Adib Hamdani (2023) Influence of composite skin on the energy absorption characteristics of an aircraft fuselage. International Journal of Engineering Materials and Manufacture, 8 (1). pp. 13-20. E-ISSN 0128-1852

Tun Ahmad Merahuddin, Tun Nurhanis and Khan, Ambareen and Akhtar, Mohammad Nishat and Khan, Sher Afghan (2023) Control of base pressure at supersonic mach number in a suddenly expanded flow. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 109 (1). pp. 210-225. ISSN 2289-7879

Turki, Al-Khalifa and Aabid, Abdul and Khan, Sher Afghan and Azami, Muhammad Hanafi and Baig, Muneer (2023) Response surface analysis of nozzle parameters at supersonic flow through microjets. Australian Journal of Mechanical Engineering, 21 (3). 1037 -1052. ISSN 1448-4846 E-ISSN 2204-2253

Venkatesan, Elumalai Perumal and Rajendran, Silambarasan and Murugan, Manickam and Medapati, Sreenivasa Reddy and Murthy, Keerty Venkata Sri Ramachandra and Alwetaishi, Mamdooh and Khan, Sher Afghan and Saleel, Chanduveetil Ahamed (2023) Performance and emission analysis of biodiesel blends in a low heat rejection engine with an antioxidant additive: an experimental study. ACS omega, 8 (40). pp. 36686-36699. E-ISSN 2470-1343

Wan A Hamid, Wan Luqman Hakim and Iannucci, Lorenzo and Robinson, Paul (2023) Flexural behaviour of 3D-printed carbon fibre composites: experimental and virtual tests - application to composite adaptive structure. Composites Part C: Open Access, 10. pp. 1-11. E-ISSN 2666-6820

Warimani, Mahammadsalman and Chaudhary, Zakir Ilahi and Khan, Sher Afghan and Bellary, Sayed Ahmed Imran and Alam, Noor and Muthuswamy, Sonachalam (2023) Analytical evaluation of loss mechanism effects on PDE performance with variation of refilling beta parameters. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 109 (2). pp. 66-78. E-ISSN 2289-7879

Wattanasrirote, Whacharapate and Batcha, Mohd Faizal Mohideen and Palamanit, Arkom and Mel, Maizirwan and Wae-Hayee, Makatar (2023) Experimental and numerical investigations of Underground Coal Gasification (UCG) using half-teardrop shape cavity. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 101 (2). pp. 172-183. ISSN 2289-7879

Zainuddin, Mohamed Al-Sideque and Abdullah, Muhammad and Ahmad, Salmiah and Uzair, Mohd Suhaimi and Ahmad Baidowi, Zaid Mujaiyid Putra (2023) Performance analysis of predictive functional control for automobile adaptive cruise control system. IIUM Engineering Journal, 24 (1). pp. 213-225. ISSN 1511-758X E-ISSN 2289-7860

Zakaria, Zairul Azrul and Abdul Majid, Zafri Azran and Harun, Muhammad Amin and Ismail, Ahmad Faris and Ihsan, Sany Izan and Sopian, Kamaruzzaman and Abdul Razak, Amir and Sharol, Ahmad Fadzil and Mohd Azmi, Mohd Syahriman (2023) Mathematical model development of evacuated glass-thermal absorber tube Collector (EGATC) for air heating application. Journal of Science And Mathematics Letters, 11 (1). pp. 73-82. ISSN 2462-2052 E-ISSN 2600-8718

Book Chapter

Tahreen, Amina and Adli, Sarah Amalina and Anuar, Hazleen and Jamaluddin, Jamarosliza and Mohan, Raja and Ali, Fathilah (2023) Algae materials for food and food packaging. In: Algae Materials: Applications Benefitting Health. Developments in Applied Microbiology and Biotechnology . Elsevier, United Kingdom, pp. 85-91. ISBN 978-0-443-18816-9

Proceeding Paper

Abd Rahman, Nurul Amirah and Anuar, Hazleen and Ali, Fathilah and Suhr, Jonghwan (2023) Mechanical and thermal properties of 3D printed polylactic acid reinforced alkaline lignin with epoxidized palm oil bio-composites. In: 5th International Conference on Advances in Manufacturing and Materials Engineering, 9th - 10th August 2022, Kuala Lumpur, Malaysia.

Crasta, Asha and Khan, Sher Afghan and Baig, Maugal Ahmed Ali and Reddy, Chamakura Abhinav (2023) Stiffness derivative for a non-planar wedge in Newtonian limit. In: International Conference on Advances in Signal Processing Communications and Computational Intelligence, 23rd - 24th July 2021, Hyderabad, India.

Djemana, Mohamed and Hrairi, Meftah (2023) Real-time structural damage detection using EMI under varying load a and temperature conditions. In: 7th International Conference on Technology, Engineering and Science, IConTES 2023, 16-19 November 2023, Antalya/Turkey.

Ismail, Izham Izzat and Mohamad Jamil, Nur Arifah and Mohamad Anuar, Mai Nurul Fareesya and Azami, Muhammad Hanafi and Nordin, Norhuda Hidayah (2023) Investigation of hybrid rocket motor regression rate doped with high entropy metallic additives. In: AIAA SciTech Forum, 23rd - 27th January 2023, National Harbor, MD, USA & Online.

Maleque, Md. Abdul and Haji Hassan, Masjuki and Yusuf Cetin, Safa and Efeoglu, Ihsan and Rahman, Md Mustafizur (2023) Wear and corrosion of ceramic coated metallic surface in presence of biodiesel. In: Proceeding of 5th International Conference on Advances in Manufacturing and Materials Engineering ICAMME 2022, 9—10 August, Kuala Lumpur, Malaysia, 9-10 August, 2022, Kuala Lumpur, Malaysia.

Naping, Rosmia and Maleque, Md. Abdul and Sarifuddin, Norshahida and Hassan, Masjuki and Bello, Kamilu Adeyemi (2023) Hybrid coating of titanium alloys via liquid additive manufacturing method: a review of recent advances. In: 6th International Conference on Mechanical, Automotive and Aerospace Engineering 2023 (ICMAAE '23), Kuala Lumpur, Malaysia. (Unpublished)

Pebrianti, Dwi and Bayuaji, Luhur and Mahdiana, Deni and Md Yusof, Hazlina and Ahmad Zabidi, Suriza (2023) Problem based learning in aerospace engineering education: case study of MECH 4129 Engineering Lab IV (pre-liminary result). In: 6th International Conference on Engineering Professional Ethics and Education 2023 (ICEPEE'23), 15th - 16th August 2023, Virtual Conference.

Polat, Muhammed Alperen and Gülten, Gökhan and Totik, Ya¸sar and Maleque, Md. Abdul and Haji Hassan, Masjuki and Yusuf Çetin, Safa and Efeoglu, Ihsan (2023) Synthesis and characterization of Ta/TaN coatings with CFUBMS-HiPIMS technology. In: Proceeding of 5th International Conference on Advances in Manufacturing and Materials Engineering, ICAMME 2022, 9—10 August, Kuala Lumpur, Malaysia, 9—10 August, 2022, Kuala Lumpur, Malaysia.

Rahman, Mohammed Ataur and Abubakar Hassan, Yusuf Abdi and Aung, Kyaw Myo and Ihsan, Sany Izan (2023) Nano-structured zinc oxide/silicon dioxide thermoelectric generator: a waste heat harvesting technology. In: 5th International Conference on Advances in Manufacturing and Materials Engineering (ICAMME2022), 9th -10th August 2022, Gombak, Selangor.

Rahman, Mohammed Ataur and Ihsan, Sany Izan and Momoud, Ali (2023) Palladium/lathanum cobaltite catalyst polymer exchange membrane fuel cell for electric vehicle. In: 5th International Conference on Advances in Manufacturing and Materials Engineering, 9th - 10th August 2022, Kuala Lumpur, Malaysia.

Rajan, Mohan Sundar and Weldcherkos, Tilahun and Khan, Sher Afghan and Baig, Maugal Ahmed Ali and Reddy, Chamakura Abhinav (2023) Integration of IOT and control systems for industry 4.0 applications. In: International Conference on Advances in Signal Processing Communications and Computational Intelligence, 23rd - 24th July 2021, Hyderabad, India.

Sabri, Muhammad Ezamuddin Ezzad and Roslan, Mohammad Amirul Qayyum and Azami, Muhammad Hanafi and Salleh, Zuraidah (2023) Regression rate end-burning hybrid rocket motor doped with high entropy metallic additives. In: AIAA SciTech Forum, 23rd - 27th January 2023, National Harbor, MD, USA & Online.

Shabana, Ayesha and Bayar, Anitha Dayanand and Crasta, Asha and Khan, Sher Afghan and Baig, Maughal Ahmed Ali and Reddy, Voggu Kesava (2023) Evaluation of stability derivatives of an Ogive in a Newtonian limit. In: International Conference on Advances in Signal Processing Communications and Computational Intelligence, 23rd - 24th July 2021, Hyderabad, India.

Suid, Mohd Helmi and Ahmad, Mohd Ashraf and Ahmad, Salmiah and Ghazali, Mohd Riduwan and Tumari, Mohd Zaidi (2023) Optimal model order reduction based on Hybridization of Adaptive Safe Experimentation Dynamics-Nonlinear Sine Cosine Algorithm. In: 2023 International Conference on System Science and Engineering (ICSSE), 27-28 August 2023, Ho Chi Minh, Vietnam.

Syed Mohamed Ali, Jaffar and M.Shaari, Muhammad Hafiz (2023) Numerical study on stability of oblique wing configuration. In: IIUM Engineering Congress, 15-16 August 2023, KOE ,IIUM.

Zainal Abedin, Nur Diana and Syed Mohamed Ali, Jaffar and Aabid, Abdul and Aminanda, Yulfian (2023) Study on the lateral torsional buckling of composite thin-walled beam. In: 8th Brunei International Conference on Engineering and Technology 2021 (BICET 2021), 8th - 10th November 2021, Bandar Seri Begawan, Brunei Darussalam (Virtual).