IIUM Repository

Items where Division is "Kulliyyah of Engineering > Department of Mechanical Engineering" and Year is 2020

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creator/Author | Item Type | No Grouping
Jump to: A | B | D | G | H | I | J | K | M | P | Q | R | S | T | Y
Number of items: 33.

A

Aabid, Abdul and Hrairi, Meftah and Mohamed Ali, Jaffar Syed (2020) Optimization of composite patch repair for center-cracked rectangular plate using design of experiments method. In: 1st International Conference on Advanced Light-Weight Materials and Structures, ICALMS 2020, 6th-7th March 2020, Hyderabad, India..

Abdullah, Nur Azam (2020) Medium-altitude long-endurance (MALE) UAV: worth buying or developing a new one? AirForce Digest, 13. pp. 34-37. ISSN 2289-327X

Abuzaid, Ahmed and Hrairi, Meftah and Kabrein, Hashim (2020) Stress analysis of plate with opposite semicircular notches and adhesively bonded piezoelectric actuators. In: 45th International Conference on Vibroengineering, 7th May 2020, Dublin, Ireland.

Afifi, Azmil and Aabid, Abdul and Khan, Sher Afghan (2020) Numerical investigation of splitter plate effect on the bluff body using finite volume method. Materials Today: Proceedings (10.1016/j.matpr.2020.05.559). pp. 1-10. ISSN 2214-7853

Afzal, Asif and A. D., Mohammad Samee and R. K., Abdul Razzak and Khan, Sher Afghan and Khan, Hurmatulla (2020) Optimum spacing between grooved tubes: an experimental study. Journal of Mechanical Science and Technology, 34 (1). pp. 469-475. ISSN 1226-4865

Ansari, Emad and Siddiqui, M. Umair and Khan, Sher Afghan and Akhtar, Mohammad Nishat and Ilmi, Abu Bakar (2020) Numerical investigation of mathematical non-dimensional constant representing smoothness in the Nusselt profile. CFD Letters, 12 (6). pp. 16-27. ISSN 2180-1363

B

Bashir, Musavir and Khan, Sher Afghan and Choudhary, Zakir Ilahi and Shinde, V. S. (2020) Wall Pressure Measurements Beneath the Supersonic Jets in an Abruptly Augmented Nozzle. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 66 (2). pp. 20-31. ISSN 2289-7879

Buys, Yose Fachmi and Ahmad, Mimi Syakina and Anuar, Hazleen and Mahmud, Mudrikah Sofia and Mohd Nasir, Nur Aimi (2020) Mechanical properties, morphology and hydrolytic degradation behavior of polylactic acid / thermoplastic polyurethane blends. IIUM Engineering Journal, 21 (1). pp. 193-201. ISSN 1511-788X E-ISSN 2289-7860

D

Delvi, Hamza Afser and Faheem, Mohammed and Aabid, Abdul and Math, M.C. and Khan, Sher Afghan (2020) Investigation of characteristics of spark ignition engine fuelled with ethanol-gasoline blends using Iso-octane additive. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 66 (1). pp. 151-163. ISSN 2289-7879

G

Ganat, Tarek Al Arbi and Hrairi, Meftah and Mohyaldinn, Mysara Eissa (2020) Experimental study to evaluate the environmental impacts of disposed produced water on the surrounding ecosystems. International Journal of Environmental Science and Technology, 17 (3). pp. 1439-1454. ISSN 1735-1472 E-ISSN 1735-2630

H

Hilmi, Mohd Radzi and Mohd Kamal, Khairidzan and Ariffin, Azrin Esmady and Norazmar, Nur Ain and Maruziki, Nur Nabilah and Musa, Nur Hidayah and Nasir, Mardhiah Syazwani and Che Azemin, Mohd Zulfaezal and Azami, Muhammad Hanafi and Abdul Rahim, Muhammad Afzam Shah (2020) Effects of different types of primary pterygium on changes in oculovisual function = Jenis pterigium primari dan kesannya pada perubahan fungsi okulovisual). Sains Malaysiana, 49 (2). pp. 383-388. ISSN 0126-6039

I

Ibren, Mohamed and Sulaeman, Erwin and Andan, Amelda Dianne and Aminanda, Yulfian and Halim, A. K. A (2020) Gust load alleviation of flexible composite wing. CFD Letters, 12 (4). pp. 79-89. ISSN 2180-1363

Ismail, Izham Izzat and Mohd Yusof, Muhammad Fadzrulizwan and Azami, Muhammad Hanafi and Mohd Ihsan, Ahmad Ariffin (2020) Thermophysical behaviour of biofuel under detonation combustion. Journal of Aeronautics, Astronautics and Aviation, 52 (1). pp. 63-82. ISSN 1990-7710

J

Jaffar, Abdul Hassan and Rahman, Mohammed Ataur (2020) EMA-CVT performance for UDDS and HWFET cycles with fuzzy logic approach. Test Engineering & Management, 83 (March/April). pp. 13775-13781. ISSN 0193-4120

K

Kamis, Nurul Nafisah and Embong, Abd Halim and Ahmad, Salmiah (2020) Optimizing PD-type fuzzy logic controller for position control of spherical robot. In: 7th International Conference on Mechatronics Engineering (ICOM) 2019, 30 - 31 Oct 2019, Putrajaya.

Khan, Sher Afghan and Bashir, Musavir and Baig, Maugal Ahmed Ali and Mehaboob Ali, Fharukh Ahmed Ghasi (2020) Comparing the effect of different turbulence models on the CFD predictions of NACA0018 airfoil aerodynamics. CFD Letters, 12 (3). pp. 1-10. ISSN 2180-1363

Kumar, Rahul and Kumar, Veera Sesha and Butt, M. Mursaleen and Sheikh, Nazir Ahmed and Khan, Sher Afghan and Afzal, Asif (2020) Thermo-mechanical analysis and estimation of turbine blade tip clearance of a small gas turbine engine under transient operating conditions. Applied Thermal Engineering, 179. pp. 1-32. ISSN 1359-4311

M

Mohammed Aldheeb, Mohammed Abdulmalek and Asrar, Waqar and Omar, Ashraf Ali and Altaf, Afaq and Sulaeman, Erwin (2020) Effect of a directionally porous wing tip on tip vortex. Journal of Applied Fluid Mechanics, 13 (2). pp. 651-665. ISSN 1735-3572 E-ISSN 1735-3645

Mohd, Umair Siddiqui and Ansari, Emaad and Khan, Sher Afghan and Gulhane, Nitin Parashram and Patil, Rajesh (2020) Numerical investigation of non-dimensional constant and empirical relation representing Nusselt profile non-uniformity. Journal of Thermophysics and Heat Transfer, 34 (1). pp. 1-15. ISSN 0887-8722

P

Pathan, Khizar Ahmed and Dabeer, Prakash S and Khan, Sher Afghan (2020) An investigation of effect of control jets location and blowing pressure ratio to control base pressure in suddenly expanded flows. Journal of Thermal Engineering,, 6 (2 (Special Issue 11)). pp. 15-23. E-ISSN 2148-7847

Pathan, Khizer Ahmed and Dabeer, Prakash S and Khan, Sher Afghan (2020) Enlarge duct length optimization for suddenly expanded flows. Advances in Aircraft and Spacecraft Science, 7 (3). pp. 203-214. ISSN 2287-528X E-ISSN 2287-5271

Prashant, Jagadesh and Antony, Alappat Joseph and Khan, Sher Afghan (2020) Experimental investigation on the performance of single spark ignition and twin spark ignition engine fuelled with ethanol-gasoline blends. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 65 (1). pp. 25-41. ISSN 2289-7879

Q

Quadros, Jaimon Dennis and Khan, Sher Afghan (2020) Prediction of base pressure in a suddenly expanded flow the processes at supersonic Mach Number Regimes using ANN and CFD. Journal of Applied Fluid Mechanics, 13 (2). pp. 499-511. ISSN 1735-3572 E-ISSN 1735-3645

R

Rahman, Mohammed Ataur and Hasan, MD Nurul and Zaki, Mohd (2020) Modeling and validation of electric vehicle drive line architectureusing bond graph. Test Engineering and Management, 82 (January - February 2020). 15154 -15167. ISSN 0193 - 4120

Renita, sharon Monis and Crasta, Asha and Khan, Sher Afghan (2020) Analytical estimation of stability derivatives of wing with curved leading edges at hypersonic mach number. Test Engineering & Management, 83 (2). pp. 13808-13819. ISSN 0193-4120

Renita, sharon Monis and Crasta, Asha and Khan, Sher Afghan (2020) Estımatıon of hypersonıc unsteady and qausı-steady dampıng derıvatıves for a delta wings at large incıdence. International Journal of Advanced Science and Technology, 29 (6). pp. 6844-6863. ISSN 2005-4238 E-ISSN 2207-6360

S

SHAMITHA, A and Crasta, Asha and Khan, Sher Afghan and VASAVI, P (2020) Computation of stability derivative for a wing for specific heat ratio= 1.66 for hypersonic flow. International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), 10 (special Issue). pp. 208-218. ISSN 2249–6890 E-ISSN 2249–8001

Sethuraman, Vigneshvaran and Rajendaran, Parvathy and Khan, Sher Afghan (2020) Base and wall pressure control using cavities and ribs in suddenly expanded flows -an overview. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 66 (1). pp. 120-134. ISSN 2289-7879

Siddiqui, Mohammad Umair and Ansari, Emad and Khan, Sher Afghan and Patil, Rajesh (2020) Numerical investigation of semi-empirical relation representing nusselt number under waterjet impingement. Journal of Thermophysics and heat transfer, 34 (3). pp. 579-590. ISSN 0887-8722

Siddiqui, Umair and Ansari, Emad and Khan, Sher Afghan and Patil, Rajesh (2020) Numerical investigation of secondary peaks in Nusselt profile under water jet impingement. Journal of Thermophysics and Heat Transfer, 34 (2 (April-June)). pp. 421-428. ISSN 0887-8722 E-ISSN 1533-6808

T

Tan, M. Y. and Liza, Shahira and Khadijah, S. M.P. and Abbas, Azlina Amir Mir and Merican, Azhar Mahmood and Ayob, K. A. and Zulkifli, Nurin Wahidah Mohd and Masjuki, Haji Hassan (2020) Surface analysis of early retrieved polyethylene tibial inserts for both knees in total knee replacement. Engineering Failure Analysis, 109. ISSN 1350-6307

Y

Yousif, Yosra and Elfaki, Faiz A. M. and Hrairi, Meftah (2020) Regression analysis of masked competing risks data under cumulative incidence function framework. Austrian Journal of Statistics, 49 (3 (Special Issue)). pp. 25-29. ISSN 1026-597X

Yousif, Yosra and Elfaki, Faiz Ahmed Mohamed and Hrairi, Meftah and Adegboye, Oyelola (2020) A Bayesian approach to competing risks model with masked causes of failure and incomplete failure times. Mathematical Problems in Engineering, 2020 (Article ID 8248640). pp. 1-7. ISSN 1024-123X E-ISSN 1563-5147

This list was generated on Tue Aug 11 20:55:52 2020 +08.