Items where Division is "Kulliyyah of Engineering > Department of Mechanical Engineering" and Year is 2015
 | Up a level |
Article
Abd. Rahman, Mohamed and Mohiuddin, A. K. M. and Abdullah, Hanani (2015) Painting process improvement through six sigma approach in a Malaysian vehicle assembly company. Advanced Materials Research, 1115. pp. 596-600. ISSN 1022-6680
Abdul Hakim, Javid and Raed, Kafafy and Erwin, Sulaeman and Sany, Ihsan and Mahmoud Idres, Moumen Mohammed (2015) Modeling and analysis of flutter-based thin-film cantilever microgenerator. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 9688-9697. ISSN 1819-6608
Abdullah, mohammad and Idres, Moumen (2015) Evaluation of Orifice Flow Meter Accuracy under Pulsation Conditions. Advanced Materials Research, 1115. pp. 472-475. ISSN 1022-6680
Abuzaid, Ahmed and Hrairi, Meftah and Shaik Dawood, Mohd. Sultan Ibrahim (2015) Mode I stress intensity factor for a cracked plate with an integrated piezoelectric actuator. Advanced Materials Research, 1115. pp. 517-522. ISSN 1022-6680
Abuzaid, Ahmed and Hrairi, Meftah and Shaik Dawood, Mohd. Sultan Ibrahim (2015) Survey of active structural control and repair using piezoelectric patches. Actuators, 4. pp. 77-98. ISSN 2076-0825
Abuzaid, Ahmed and Shaik Dawood, Mohd. Sultan Ibrahim and Hrairi, Meftah (2015) Effects of adhesive bond on active repair of aluminium plate using piezoelectric patch. Applied Mechanics and Materials, 799-80. pp. 788-793. ISSN 1660-9336
Abuzaid, Ahmed and Shaik Dawood, Mohd. Sultan Ibrahim and Hrairi, Meftah (2015) The effect of piezoelectric actuation on stress distribution in aluminum plate with circular hole. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 9723-9729. ISSN 1819-6608
Ahmed, Hamdi E. and Ahmed, Mirghani Ishak and M.Z, Yusoff and Hawlader, Mohammad Nurul Alam and Habeeb, Al-Ani (2015) Experimental study of heat transfer augmentation in non-circular duct using combined nanofluids and vortex generator. International Journal of Heat and Mass Transfer, 90. pp. 1197-1206. ISSN 0017-9310
Ahmed, Hamdi E. and Ahmed, Mirghani Ishak and Yusoff, Mohd Zamri (2015) Heat transfer enhancement in a triangular duct using compound nanofluids and turbulators. Applied Thermal Engineering, 91. pp. 191-201. ISSN 1359-4311
Al Jeroudi, Yazan and Legowo, Ari and Sulaeman, Erwin (2015) Smartphone based classification system for indoor navigation. Applied Mechanics and Materials, 775. pp. 436-440. ISSN 1660-9336
Aljeroudi, Yazan and Legowo, Ari and Sulaeman, Erwin (2015) Mobility determination and estimation based on smartphones-review of sensing and system. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 10066-10071. ISSN 1819-6608
Alsubari, Saleh and Mohamed Ali, Jaafar Syed and Aminanda, Yulfian (2015) Hygrothermoelastic analysis of anisotropic cylindrical shells. Composite Structures, 131. pp. 151-159. ISSN 0263-8223
Amin, Zakaria Mohd. and Hawlader, Mohammad Nurul Alam (2015) Analysis of solar desalination system using heat pump. Renewable Energy, 74. pp. 116-123. ISSN 0960-1481
Bahar, Rubina and Hawlader, Mohammad Nurul Alam and Ariff, Tasnim Firdaus (2015) Effect of coolant plate geometry and material in a freshwater production system: an experimental study. Advanced Materials Research, 1115. pp. 468-471. ISSN 1022-6680
Baradey, Yehya and Hawlader, Mohammad Nurul Alam and Ismail, Ahmad Faris and Hrairi, Meftah (2015) Waste heat recovery in heat pump systems: solution to reduce global warming. IIUM Engineering Journal, 16 (2). pp. 31-42. ISSN 2289-7860 (O), 1511-788X (P) E-ISSN 2289-7860
Chaudhary, Zakir Ilahi and Shinde, Vilas B. and Bashir, Musavir and Khan, Sher Afghan (2015) Experimental investigation of the base flow from the nozzles with sudden expansion. International Journal of Applied Engineering Research (IJAER), 10 (92-spc). pp. 208-211. ISSN 0973-4562 E-ISSN 0973-9769
Chaudhary, Zakir Ilahi and Vilas B., Shinde and Khan, Sher Afghan (2015) Effectiveness of micro-jets at different level of expansion. IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE, 12 (4). pp. 29-34. ISSN 2278-3008 (O), 2319-7676 (P)
Crasta, Asha and Khan, Sher Afghan (2015) Effect of angle of attack on damping derivatives of delta wing with full sine wave curved leading edge. International Journal of Emerging trends in Engineering and Development (IJETED), 5 (1). pp. 237-245. ISSN 2249-6149
Crasta, Asha and Khan, Sher Afghan (2015) Effect of aspect ratio with angle of attack of an oscillating hypersonic delta wing with straight leading edges. Mathematical Sciences International Research Journal, 4 (2). pp. 28-33. ISSN 2278-8697
Djemana, Mohamed and Hrairi, Meftah (2015) Damage detection in structures using electromechanical impedance and finite element analysis. Applied Mechanics and Materials, 799-80. pp. 971-975. ISSN 1660-9336
Elfaghi, Abdulhafid M. and Omar, Ashraf Ali and Asrar, Waqar (2015) Higher-Order Compact-Flow Field-Dependent Variation (HOC-FDV) method for solving two-dimensional navier-stokes equations. International Journal for Computational Methods in Engineering Science and Mechanics, 16 (4). pp. 256-263. ISSN 1550-2287
Eshteyah, Mohanna and Hijazi, Ala and Hrairi, Meftah and UNSPECIFIED (2015) Nondestructive evaluation of welded joints using digital image correlation. Journal of Nondestructive Evaluation, 34 (4). pp. 1-12. ISSN 0195-9298
Eshteyah, Mohanna and Hrairi, Meftah and Shaik Dawood, Mohd. Sultan Ibrahim and Mohiuddin, A. K. M. (2015) Finite element modeling of clinching process for joining dissimilar materials. Advanced Materials Research, 1115. pp. 109-112. ISSN 1022-6680
Fadhli, Mohammad and Omar, Ashraf Ali and Asrar, Waqar (2015) Flowfield-dependent variation method for moving-boundary problems. AIAA Journal, 53 (4). pp. 1026-1036. ISSN 1533-385X (O), 0001-1452 (P) E-ISSN 1533-385X
Ganat, Tarek A. and Hrairi, Meftah and Hawlader, Mohammad Nurul Alam and Osman, Farj (2015) Development of a novel method to estimate fluid flow rate in oil wells using electrical submersible pump. Journal of Petroleum Science and Engineering, 135. pp. 466-475. ISSN 0920-4105
Hanouf, Zahir and Faris, Waleed Fekry and Mohd Nor, Mohd Jailani (2015) Dynamic characterization of vehicle structural panels. International Journal of Vehicle Noise and Vibration, 11 (3/4). pp. 199-209. ISSN 1479-1471 E-ISSN 1479-148X
Herawan, Safarudin Gazali and Rohhaizan, Abdul Hakim and Ismail, Ahmad Faris and Shamsudin, Shamsul Anuar (2015) The study on performance of naturally aspirated spark ignition engine equipped with waste heat recovery mechanism. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 10058-10065. ISSN 1819-6608
Idres, Moumen and Makame, Burhani and Ahmad, Bala Nabil and Naji, Saleh and Safiuddin, Ahmad (2015) Design, fabrication and flight testing of a surveillance UAV. Advanced Materials Research, 1115. pp. 450-453. ISSN 1022-6680
Isharuddin, Siti Sarah and Okasha, Mohamed and Ibrahim, Sultan (2015) IIUM cubeSat structural subsystem design. Advanced Materials Research, 1115. pp. 568-572. ISSN 1662-8985
Kamel, Mohammed and Owis, Farouk and Idres, Moumen and Hashem, Aly (2015) Numerical simulation and validation of high-speed turbulent and chemically-reacting flows. International Journal of Engineering Systems Modelling and Simulation, 7 (2). pp. 111-124. ISSN 1755-9766
Kamel, Mohammed and Owis, Farouk and Idres, Moumen and Hashem, Aly (2015) Numerical simulation of supersonic and turbulent combustion with trans-verse sonic fuel injection. International Journal of Engineering Systems Modelling and Simulation, 7 (2). pp. 35-61. ISSN 1755-9766
Ladipo, Ismail and Darsivan, Fadly Jashi and Faris, Waleed Fekry (2015) Evaluation of elastomeric models for engine mountings applications. International Journal of Vehicle Noise and Vibration, 11 (3/4). pp. 210-224. ISSN 1479-1471 E-ISSN 1479-148X
Ludin@Jamaluddin, Hani and Omar, Ashraf Ali and Asrar, Waqar (2015) Numerical study of effect of spoiler configuration on wake vortex alleviation. ASCE Journal of Aerospace Engineering , 28 (3). ISSN 0893-1321 (In Press)
Mangun, Muhd Firdause and Idres, Moumen and Abdullah, Kassim Abdulrahman (2015) Power management controller for hybrid electric vehicle using fuzzy logic. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 9682-9687. ISSN 1819-6608
Mezeix, Laurent and Seman, Adam and Muhamad Nazreen, M. Nasir and Aminanda, Yulfian and Rivai, Ahmad and Castanie, Bruno and Olivier, Philippe and Ali, Karim Mansur (2015) Spring-back simulation of unidirectional carbon/epoxy flat laminate composite manufactured through autoclave process. Composite Structures, 124. pp. 196-205. ISSN 0263-8223
Mohamed, Norhafana and Ismail, Ahmad Faris and Abdul Majid, Zafri Azran (2015) Performance evaluation of solar collectors using a solar simulator. IIUM Engineering Journal, 6 (2). pp. 79-90. ISSN 2289-7860 (O), 1511-788X (P) E-ISSN 2289-7860
Mohamed Ali, Jaafar Syed (2015) Thermoelastic slutions for flexure of anisotropic cylindrical shells. Advanced Materials Research, 1115. pp. 564-567. ISSN 1022-6680
Mohamed Ali, Jaafar Syed and Abeid Abeid , Rubeya (2015) LEADME : an educational software for composite laminate analysis and design. Advanced Materials Research, 1115. pp. 578-581. ISSN 1022-6680
Mohamed Ali, Jaafar Syed and Hrairi, Meftah and Mohamad, Masturah (2015) Stress analysis of thin-walled laminated composite beams. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 10088-10095. ISSN 1819-6608
Mohd Nasir, Kassim and Mahmoud Idres, Moumen Mohammed and Ahmad, Muhammad Iqbal and Rizman, Zairi Ismaiel (2015) Computational analysis of air intake system for internal combustion engine in presence of acoustic resonator. ARPN Journal of Engineering and Applied Sciences, 10 (22). pp. 9468-9475. ISSN 1819-6608
Mohd. Amin, Zakaria and Hawlader, Mohammad Nurul Alam and Ye, Shaochun (2015) Analysis and modelling of solar evaporator collector. IIUM Engineering Journal, 16 (2). pp. 13-29. ISSN 1511-788X E-ISSN 2289-7860
Mohiuddin, A. K. M. (2015) Development of catalytic converter using non-precious metals. Advanced Materials Research, 1115. pp. 462-467. ISSN 1022-6680
Mohiuddin, A. K. M. and Abd. Rahman, Mohamed and A. Jabar, Julia (2015) Adoption and adaptation of Japanese manufacturing management in an automotive company of Malaysia. Advanced Materials Research, 1115. pp. 589-595. ISSN 1022-6680
Mohiuddin, A. K. M. and Adeyemi, Nabeel A. (2015) Large eddy simulation for transesterification of waste vegetable oil. IIUM Engineering Journal, 16 (1). pp. 53-79. ISSN 2289-7860 (O), 1511-788X (P) E-ISSN 2289-7860
Mohiuddin, A. K. M. and Rahman, Mohammed Ataur and Chemani, Mohamed Fadhil and Zakaria, Mohd Baihaqi (2015) Investigation of PEM fuel cell for automotive use. IIUM Engineering Journal, 16 (2). pp. 69-78. ISSN 2289-7860 (O), 1511-788X (P) E-ISSN 2289-7860
Muhida, Riza and Djajadi, Arko and Mohamad, Nor Hilmi and Legowo, Ari (2015) Embedded system design of a maximum power point tracking controller for traffic light system powered by photovoltaic. Journal of Instrumentation, Automation and Systems, 2 (2). pp. 59-65. ISSN 2288-582X
Okasha, Mohamed Elsayed Aly Abd Elaziz and Newman, Brett (2015) Modeling, dynamics and control of spacecraft relative motion in a perturbed keplerian orbit. International Journal of Aeronautical and Space Sciences, 16 (1). pp. 77-88. ISSN 2093-2480 (O), 2093-274X (P) E-ISSN 2093-2480
Okasha, Mohamed Elsayed Aly Abd Elaziz and Park, Chandeok and Park, Sang-Young (2015) Guidance and control for satellite in-orbit-self-assembly proximity operations. Aerospace Science and Technology, 41. pp. 289-302. ISSN 1270-9638 E-ISSN 1626-3219
Rafia, Afroz and Rahman, Mohammed Ataur and Masud, Muhammad Mehedi and Akhtar, Rulia and Duasa, Jarita (2015) How individual values and attitude influence consumers’ purchase intention of electric vehicles—some insights from Kuala Lumpur, Malaysia. Environment and Urbanization ASIA, 6 (2). pp. 1-18. ISSN 0976-3546 (O), 0975-4253 (P)
Rahman, Mohammed Ataur and Rashid, Muhammad Mahbubur and Mohiuddin, A. K. M. and Hawlader, Mohammad Nurul Alam (2015) Nano-battery technology for EV-HEV panel: a pioneering study. IIUM Engineering Journal, 16 (2). pp. 57-68. ISSN 2289-7860 (O), 1511-788X (P) E-ISSN 2289-7860
Rahman, Mohammed Ataur and Razzak, Fadhilah and Rafia, Afroz and Mohiuddin, A. K. M. and Hawlader, Mohammad Nurul Alam (2015) Power generation from waste of IC engines. Renewable and Sustainable Energy Reviews, 51. pp. 382-395. ISSN 1364-0321
Rashid, Muhammad Mahbubur and Firdaus, Md Meftahul and Hassan, Muhammad Hasibul and Rahman, Mohammed Ataur (2015) ANSYS finite element design of an energy saving magneto-rheological damper with improved dispersion stability. Journal of Mechanical Science and Technology, 29 (7). pp. 2793-2802. ISSN 1738-494X E-ISSN 1976-3824
Rashmi, Walvekar and Siddiqui, Mohammad Khalid and Ismail, Ahmad Faris and Saidur, R. and Rashid, A. K. (2015) Experimental and numerical investigation of heat transfer in CNT nanofluids. Journal of Experimental Nanoscience, 10 (7). pp. 545-563. ISSN 1745-8099
Shah, Qasim Hussain and Topa, Ameen (2015) Investigation of energy absorption capabilities of compressed and uncompressed crushable foams. Mechanical Engineering Journal, 2 (5). pp. 1-8. ISSN 2187-9745
Syed, Syed Ashfaq and Khan, Sher Afgha (2015) Combined effect of relief and level of expansion in a suddenly expanded flow. IOSR Journal , 12 (5). pp. 52-59. ISSN e-ISSN: 2279-0837, p-ISSN: 2279-0845.
Syed Mohamed Ali, Jaffar and Alsubri, Saleh and Aminanda, Yulfian (2015) A higher order theory for bending of cross ply laminated cylindrical shell under hygrothermal loads. Advanced Materials Research, 1115. pp. 509-512. ISSN 1022-6680
Tahmasebpour, Kamyar and Hrairi, Meftah and Shaik Dawood, Mohd. Sultan Ibrahim (2015) Finite element simulation of electro-mechanical impedance technique. Advanced Materials Research, 1115. pp. 539-542. ISSN 1022-6680
UlHaque, Anwar and Asrar, Waqar and Amri Hafiz, Nik Mohammad and Kashif, Syed Muhammad and Omar, Ashraf Ali and Sulaeman, Erwin and Ali, JS Mohamed (2015) Design and fabrication of a winged hybrid airship model for IIUM-LSWT. Advanced Materials Research, 1115. pp. 513-516. ISSN 1022-6680
UlHaque, Anwar and Asrar, Waqar and Omar, Ashraf Ali and Sulaeman, Erwin and Mohammad Ali, Jaffar Syed (2015) Cambered profile of a California sea lion's body. The Journal of Experimental Biology, 218. pp. 1270-1271. ISSN 0022-0949
UlHaque, Anwar and Asrar, Waqar and Omar, Ashraf Ali and Sulaeman, Erwin and Syed Mohamed Ali, Jaffar (2015) Aerostatic and aerodynamic modules of a hybrid buoyant aircraft: an analytical approach. IIUM Engineering Journal, 16 (1). pp. 9-17. ISSN 2289-7860 (O), 1511-788X (P) E-ISSN 2289-7860
UlHaque, Anwar and Asrar, Waqar and Omar, Ashraf Ali and Sulaeman, Erwin and Syed Mohamed Ali, Jaffar (2015) Half model testing for canard of a hybrid buoyant aircraft. International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, 9 (10). pp. 1544-1547.
Venkatason, Kausalyah and Shasthri, Sevaguru and Abdullah, Kassim Abdulrahman and Idres, Moumen and Shah, Qasim Hussain and Wong, Sha Voon (2015) Vehicle profile optimization using central composite design for pedestrian injury mitigation. Applied Mathematics & Information Sciences, 9 (1). pp. 197-204. ISSN 1935-0090
Walvekar, Rashmi and Siddiqui, Mohammad Khalid and Ong, SeikSan and Ismail, Ahmad Faris (2015) Application of CNT nanofluids in a turbulent flow heat exchanger. Journal of Experimental Nanoscience, 11 (1). pp. 1-17. ISSN 17458080
Zulkifli, Mohammad and Omar, Ashraf Ali and Asrar, Waqar (2015) Flowfield dependent variation method for one dimensional stationary and moving boundary problems. International Journal of Computational Science and Engineering, 10 (1/2). pp. 130-144. ISSN 1742-7193 (O), 1742-7185 (P)
Proceeding Paper
Abdelrahman, Mohammad (2015) New algorithm for attitude and orbit determination using magnetic field measurements. In: The 25th AAS/AIAA Space Flight Mechanics Meeting, 11th-15th January 2015, Williamsburg, USA.
Ahmed, Shugata and Hasan, Muhammad Hasibul and Ismail, Ahmad Faris and Sulaeman, Erwin (2015) Effect of geometrical parameters on boiling heat transfer and pressure drop in micro finned micro gap. In: International Postgraduate Conference on Engineering Research (IPCER) 2015 , 27 - 28 Oct 2015, Gombak. (Unpublished)
Ahmed, Shugata and Ismail, Ahmad Faris and Sulaeman, Erwin and Hasan, Muhammad Hasibul (2015) Study on turbulent characteristics of flow boiling in a micro gap under the influence of surface roughness and micro fins. In: International Postgraduate Conference on Engineering Research (IPCER) 2015 , 27th-28th Oct. 2015, International Islamic University Malaysia (IIUM), Gombak, Kuala Lumpur.
Ahmed, Shugata and Ismail, Ahmad Faris and Sulaeman, Erwin and Hasan, Muhammad Hasibul (2015) A critical assessment on evaporative cooling performance of micro finned micro gap for high heat flux applications. In: International Postgraduate Conference on Engineering Research (IPCER) 2015 , 27th-28th Oct. 2015, Gombak Campus, IIUM. (Unpublished)
Asrar, Waqar and Altaf, Afaq and Omar, Ashraf Ali and Hrairi, Meftah and Thong , Boon Tan (2015) Aerodynamic performance of a naca 23012 half wing model with a reverse delta wing type add-on device. In: 8th Ankara International Aerospace Conference, 10-12 Sep 2015, Ankara, Turkey.
Bashir, Musavir and Khan, Sher Afghan and Rajendran, Parvathy (2015) Combined effect of nozzle pressure ratio and screech prone supersonic mach number in a suddenly expanded flow. In: International Conference on Mechanical Engineering And Advanced Material (ICME-AM) 2015, 3rd-4th Dec. 2015, Kota Kinabalu, Sabah.
Chaudhary, Zakir Ilahi and Shinde, V.B and Ashfaq, Syed and Khan, Sher Afghan (2015) Effect of level of expansion and inertia level in a suddenly expanded flow. In: International Conference on Mechanical Engineering & Advanced Material (ICME-AM2015), 3rd-4th Dec. 2015, Kota Kinabalu, Sabah.
Chowdhury, Md. Sazzad Hossien and Razali, Nur Isnida and Hashim, Ishak and Abdul Majid, Zanariah (2015) A reliable numeric analytic technique for improving the solution of nonlinear chaotic and hyperchaotic problems. In: Kolokium Race (Research Acculturation Collaborative Effort) "RACE 2015", 13th-14th Jan. 2015, Akademi Kepimpinan Pengajian Tinggi (AKEPT), Bandar Enstek, Negeri Sembilan, Malaysia. (Unpublished)
Fürst, Jiri and Islam, Mazharul and Príhoda, Jaromír and Wood, David H. (2015) Modifications to the k-kL-ω transition model based on Pohlhausen and Falkner-Skan profiles. In: North American Wind Energy Academy (NAWEA) 2015 Symposium, 9th-11th June 2015, Virginia, USA.
Fürst, Jiri and Islam, Mazharul and Příhoda, J. and Wood, David (2015) Towards pressure gradient sensitive transitional k-kl-omega model: The natural transition for low-re airfoils. In: Topical Problems of Fluid Mechanics 2015, 11th-13th February 2015, Prague, Czech Republic.
Islam, Mazharul and Langfeldt, Felix and Juretic, Franjo and Guerrero, Joel and Wood, David (2015) CFD analysis of NACA4415 airfoil with γ−Reθ model considering natural transition. In: North American Wind Energy Academy (NAWEA) 2015 Symposium, 9th-11th June 2015, Virginia, USA.
Khan, Sher Afghan (2015) Influence of low length-to-diameter ratio and nozzle pressure ratio in an abruptly expanded flow. In: International Conference on Mechanical Engineering And Advanced Material (ICME-AM) 2015, 3rd-4th Dec. 2015, Kota Kinabalu, Sabah.
Makhdoomi, Mohatashem R. and Ba Hamid, Alala M. and Saleh, Tanveer (2015) Development and performance evaluation of a linear actuator based wearable assistive device. In: 2015 10th Asian Control Conference (ASCC 2015), 31st May- 3rd June 2015, Kota Kinabalu, Sabah.
Mohiuddin, A. K. M. and Julia , Abdul Jabar (2015) Performance improvement of local automotive industry by adopting JMM. In: International Conference on Mechanical Engineering 2015 (ICME 2015), 18 - 20 December, 2015, Dhaka, Bangladesh.
Shuriye, Abdi Omar (2015) Love, mercy and justice in educating and managing. In: Premier Ibadah Camp for IIUM Leaders 2015 (PIC 2015), 27th Nov. 2015, Sultan Haji Ahmad Shah Mosque & Auditorium, International Islamic University Malaysia. (Unpublished)
Tahmasebpour, Kamyar and Hrairi, Meftah and Shaik Dawood, Mohd. Sultan Ibrahim (2015) Finite element simulation of electro-mechanical impedance technique. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2014), 23-25 September 2014, Kuala Lumpur. (Unpublished)
Ul Haque, Anwar and Asrar, Waqar and Sulaeman, Erwin and Syed Mohamed Ali, Jaffar and Omar, Ashraf Ali (2015) Power-off static stability analysis of a clean configuration of a hybrid buoyant aircraft. In: 8th Ankara International Aerospace Conference 2015, 10th-12th Sept. 2015, Metu, Ankara, Turkey.
UlHaque, Anwar and Asrar, Waqar and Omar, Ashraf A. and Sulaeman, Erwin and Syed Mohamed Ali, Jaffar (2015) Aerodynamics and Static Stability Characteristics of a Hybrid Buoyant Aerial Vehicle at Low Speed. In: 62nd Canadian Aerospace Institute Conference (Aero 2015), 19 - 21 May 2015, Montreal, Canada. (In Press)
UlHaque, Anwar and Asrar, Waqar and Omar, Ashraf Ali and Sulaeman, Erwin and Syed Mohamed Ali, Jaffar (2015) Establishing the analytical relationships for mass and volumetric mass fractions for hybrid boyant aircraft. In: International Postgraduate Conference on Engineering Research (IPCER) 2015 , 27th-28th Oct. 2015, Gombak Campus, IIUM. (Unpublished)
UlHaque, Anwar and Asrar, Waqar and Omar, Ashraf Ali and Sulaeman, Erwin and Syed Mohamed Ali, Jaffar (2015) Hydrostatic and hydrodynamic characteristics of swimming animals: an inspiration for hybrid buoyant aircraft. In: 4th International Scientific Conference on Applied Sciences and Engineering (4 thISCASE-2015), 3rd-4th Oct. 2015, Langkawi, Malaysia.
Zaidon, Nuradawiyah and Nordin, Anis Nurashikin and Ismail, Ahmad Faris (2015) Modelling of microfluidics network using electric circuits. In: 2015 IEEE Regional Symposium on Micro and Nanoelectronics (RSM 2015), 19th-21st Dec. 2015, Kuala Terengganu, Terengganu.
Monograph
Hrairi, Meftah (2015) Development of Electro-Mechanical Impedance-Based Damage Detection Technique for Structural Health Monitoring. Research Report. [s.n]. (Unpublished)
Topa, Ameen and Shah, Qasim Hussain (2015) A study of investigate and eliminate the crack-like flaws in bulk metal forming processes. Project Report. IIUM Press, Kuala Lumpur. (Unpublished)