Items where Division is "Kulliyyah of Engineering > Department of Mechanical Engineering" and Year is 2014

Article

-, Gunawan and Sopyan, Iis and Mel, Maizirwan and -, Suryanto (2014) Preparation of zinc doped-biphasic calcium phosphate/carbon nanotube composites. Advances in Environmental Biology, 8 (3(Spe)). pp. 787-791. ISSN 1995-0756 E-ISSN 1998-1066

Abdullah, Muhammad Faris and Idres, Moumen (2014) Constrained model predictive control for proton exchange membrane fuel cell. Journal of Mechanical Science and Technology, 28 (9). pp. 3855-3862. ISSN 1738494X

Abdullah, Muhammad Faris and Idres, Moumen (2014) Fuel cell starvation control using model Predictive technique with laguerre and exponential weight functions. Journal of Mechanical Science and Technology, 28 (5). pp. 1995-2002. ISSN 1738-494X E-ISSN 1976-3824

Abdullah, Nur Azam and Sulaeman, Erwin (2014) Aeroelastic flutter analysis of supersonic wing with multiple external stores. IIUM Engineering Journal, 15 (2). pp. 1-11. ISSN 1511-788X

Abdullah, Nur Azam and Sulaeman, Erwin (2014) Aeroelastic tailoring of oscillating supersonic wing with external stores. Applied Mechanics and Materials, 464. pp. 110-115. ISSN 1660-9336

Ahmed, Mirghani Ishag and Ahmed, Hamdi E. and Yusoff, M.Z. and Hawlader, M.N.A. (2014) Numerical analysis of heat transfer and nanofluid flow in a triangular duct with vortex generator: two-phase model. Heat Transfer—Asian Research, 45 (3). pp. 1-21. ISSN 1099-2871

Ahmed, Shugata and Seder, Islam M.F. and Ab. Manaf, Hazli and Ahmed, Mirghani Ishak and Hawlader, Mohammad Nurul Alam (2014) Numerical investigation of flow boiling in double-layer microchannel heat sink. Australian Journal of Basic and Applied Sciences, 8 (15 ). pp. 18-24. ISSN 1991-8178

Akmeliawati, Rini and Bailey, Donald and Bilal, Sara Mohammed Osman Saleh and Demidenko, Serge and Gamage, Nuwan and Khan , Shujjat and Ye, Chow Kuang and Ooi, Melani and Gupta, Gourab Sen (2014) Assistive technology for relieving communication lumber between hearing/speech impaired and hearing people. The Journal of Engineering. pp. 1-12. ISSN 2051-3305

Altaf, Alaman and Omar, Ashraf Ali and Asrar, Waqar (2014) Passive drag reduction of square back road vehicles. Journal of Wind Engineering and Industrial Aerodynamics, 134 (2014). pp. 30-43. ISSN 0167-6105

Ang, Beechin and Yaacob, Iskandar Idris and Wong, Yew Hoong and Wong, Yew Hoong (2014) Phase and surface area studies of maghemite nanoparticles dispersed in silica gel. Materials Research Innovations, 18. S6-32-S6-35. ISSN 1432-8917 E-ISSN 1433-075X

Ashfaq, Syed and Khan, Sher Afghan (2014) Effect of mach number on wall pressure flow field for area ratio 2.56. IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE), 11 (2). pp. 56-64. ISSN 2320-334X E-ISSN 2278-1684

Ashfaq, Syed and Khan, Sher Afghan (2014) Experimental investigation of flow through convergent nozzle and the influence of micro jets on the enlarged duct flow field. IPASJ International Journal of Mechanical Engineering (IIJME ), 2 (3). pp. 7-14. ISSN 2321-6441

Ashfaq, Syed and Khan, Sher Afghan (2014) Experimental studies on low speed converging nozzle flow with sudden expansion. International Journal of Emerging Technology and Advanced Engineering (IJETAE), 4 (1). pp. 532-540. ISSN 2250-2459

Ashfaq, Syed and Khan, Sher Afghan (2014) Influence of micro jets on wall pressure for area ratio 3.24. International Journal of Emerging Technology and Advanced Engineering (IJETAE), 4 (2). pp. 872-880. ISSN 2250-2459

Ashfaq, Syed and Khan, Sher Afghan (2014) Studies on flow from converging nozzle and the effect of nozzle pressure ratio for area ratio of 6.25. International Journal of Engineering Science & Advanced Technology, 4 (1). pp. 49-60. ISSN 2250-3676

Ashfaq, Syed and Khan, Sher Afghan (2014) Studies on wall pressure flow control by micro jets for high area ratio. International Journal of Advanced Scientific and Technical Research, 4 (1). pp. 664-672. ISSN 2249-9954

Ashfaq, Syed and Khan, Sher Afghan (2014) Studies on wall pressure of sonic flow through the converging nozzles for different area ratios. International Journal of Emerging Trends in Science and Technology, 4 (2). pp. 125-137. ISSN 2278-6856

Ashfaq, Syed and Khan, Sher Afghan (2014) The effect of micro jets on wall pressure for sonic under expanded flow. International Journal of Engineering Research and Application, 4 (3). pp. 32-38. ISSN 2248-9622

Ashfaq, Syed and Khan, Sher Afghan and Rathakrishnan, Ethirajan (2014) Control of base pressure with micro jets for area ratio 2.4. International Review of Mechanical Engineering, 8 (1). pp. 1-10. ISSN 1970-8734 E-ISSN 1970-8742

BenLahcene, Zohir and Faris, Waleed Fekry and Ihsan, Sany Izan and Ridhuan Siradj , Fadly Jashi Darsivan (2014) Optimisation and control of semi-active suspension using genetic algorithm for off-road full vehicle. International Journal of Vehicle Systems Modelling and Testing, 9 (3/4). pp. 372-382. ISSN 1745-6444 (O), 1745-6436 (P)

BenLahcene, Zohir and Hasbullah, Faried and Faris, Waleed Fekry (2014) A comparative ride performance of passive, semi-active and active suspension systems for off-road vehicles using half car model. International Journal of Heavy Vehicle Systems (IJHVS), 21 (1). pp. 26-41. ISSN 1741-5152 (O), 1744-232X (P)

Crasta, Asha and Khan, Sher Afghan (2014) Effect of angle of attack on stiffness derivative of an oscillating supersonic delta wing with curved leading edges. IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE), 11 (6vIII). pp. 12-25. ISSN 2320-334X E-ISSN 2278-1684

Crasta, Asha and Khan, Sher Afghan (2014) Effect of angle of incidence on roll damping derivatives of a delta wing. International Journal of Emerging trends in Engineering and Development (IJETED), 4 (2). pp. 343-356. ISSN 2249-6149

Crasta, Asha and Khan, Sher Afghan (2014) Effect of angle of incidence on stability derivatives of a wing. International Journal for Research in Applied Science and Engineering Technology (IJRASET), 2 (V). pp. 411-422. ISSN 2321-9653

Crasta, Asha and Khan, Sher Afghan (2014) Effect of mach number on stiffness and damping derivatives for oscillating hyersonic non-planar wedge. IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE), 11 (2vVIII). pp. 4-11. ISSN 2320-334X E-ISSN 2278-1684

Crasta, Asha and Khan, Sher Afghan (2014) Estimation of stability derivatives for a planar wedge in the newtonian limit. IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE, 10 (2 ). pp. 1-6. ISSN 2278-3008 (O), 2319-7676 (P)

Crasta, Asha and Khan, Sher Afghan (2014) Hypersonic similitude for planar wedges. International Journal of Advanced Research in Engineering and Technology (IJARET), 5 (2). pp. 16-31. ISSN 0976-6480 E-ISSN 0976-6499

Crasta, Asha and Khan, Sher Afghan (2014) Supersonic similitude for oscillating non-planar wedge. IOSR Journal of Mathematics (IOSR-JM), 10 (2vVI). pp. 15-24. ISSN 2319-7676 E-ISSN 2278-3008

Echrif, Salah B. M. and Hrairi, Meftah (2014) Significant parameters for the surface roughness in incremental forming process. Materials and Manufacturing Processes, 29 (6). pp. 697-703. ISSN 1532-2475 (O), 1042-6914 (P)

Faris, Waleed Fekry and Rakha, Hesham A. and Elmoselhy, Salah A.M. (2014) Impact of intelligent transportation systems on vehicle fuel consumption and emission modeling: an overview. SAE International Journal of Materials and Manufacturing, 7 (1). pp. 129-146. ISSN 1946-3979 E-ISSN 1946-3987

Faris, Waleed Fekry and Rakha, Hesham A. and Elmoselhy, Salah A.M. (2014) Supercharged diesel powertrain intake manifold analytical model. International Journal of Vehicle Systems Modelling and Testing, 9 (1). pp. 1-35. ISSN 1745-6436 E-ISSN 1745-6444

Ferdaus, Mohammad Meftahul and Rashid, Muhammad Mahbubur and Hassan, Muhammad Hasibul and Rahman, Mohammed Ataur (2014) Optimal design of magneto-rheological damper comparing different configurations by finite element analysis. Journal of Mechanical Science and Technology, 28 (9). pp. 3667-3677. ISSN 1976-3824 (O), 1738-494X (P)

Gunawan, - and Sopyan, Iis and Suryanto, - and Naqshband, Abreeq (2014) Zinc-doped biphasic calcium phosphate nanopowders synthesized via sol-gel method. Indian Journal of Chemistry - Section A Inorganic, Physical, Theoretical and Analytical Chemistry, 53A (5). pp. 152-158. ISSN 0376-4710 E-ISSN 0975-0975

Hanouf, Zahir and Faris, Waleed Fekry and Mohd Nor , Mohd Jailani (2014) Dynamic characterisation of car door and hood panels using FEA and EMA. Applied Mechanics and Materials, 471. pp. 89-96. ISSN 1660-9336

Hanouf, Zahir and Faris, Waleed Fekry and Nor, Mohd Jailani Mohd (2014) Dynamic characterization of car door and hood panels using FEA and EMA. Applied Mechanics and Materials, 471. pp. 89-96. ISSN 1662-7482

Herawan, Safarudin Gazali and Rohhaizan, Abdul Hakim and Putra, Azma and Ismail, Ahmad Faris (2014) Prediction of waste heat energy recovery performance in a naturally aspirated engine using artificial neural network. ISRN Mechanical Engineering. 240942-1-6. E-ISSN 2090-5130

Hossain, Altab and Nazir, M. and Ramesh, Singh and Rahman, Mohammed Ataur and K., H. Wong (2014) Fuzzy logic based model for prediction of building wall humidity level. Indoor and Built Environment, 23 (4). pp. 565-573. ISSN 1423-0070 (In Press)

Husain, Iman A. F. and Al-Khatib, Ma'an Fahmi Rashid and Jami, Mohammed Saedi and Mirghani, Mohamed Elwathig Saeed and Zainudin, Zaki and Hoda, Asif (2014) Mechanism of fat, oil and grease (FOG) deposit formation in sewer systems. Advances in Environmental Biology, 8 (3). pp. 815-820. ISSN 1995-0756

Ismail, Ahmad Faris and Abd-Halim, B.A. and Walvekar , Rashmi Gangasa and Yusaf, Talal F. (2014) Smaller radiator with enhanced heat transfer using CNT-nanofluids. WIT Transactions on Engineering Sciences, 88. pp. 185-191. ISSN 1743-3533

Ismail, Ahmad Faris and Anuar, Asnida and Walvekar , Rashmi Gangasa and Yusaf, Talal F. (2014) Corrosion effects of CNT-nanofluids on different metals. WIT Transactions on Engineering Sciences, 87. pp. 139-146. ISSN 1743-3533

Kafafy, Raed Ismail and Azami, Muhammad Hanafi and Idres, Moumen (2014) Effect of varying design options on the transient behavior of a hybrid rocket motor. Journal of Aerospace Technology and Management, 6 (1). pp. 69-82. ISSN 1984-964 E-ISSN 2175-9146

Kamalaldin, Karim and Okasha, Mohamed Elsayed Aly Abd Elaziz (2014) Low inclination circular orbits for remote sensing satellites. Applied Mechanics and Materials, 629. pp. 298-303. ISSN 1660-9336

Kausalyah, Venkatason and Shasthri, Sevaguru and Abdullah, Kassim Abdulrahman and Idres, Moumen and Shah, Qasim Hussain (2014) Development of economical vehicle model for pedestrian-friendly front-end profile study. International Journal of Simulation Modelling, 13 (4). pp. 419-432. ISSN 1726-4529

Legowo, Ari and Mohamad, Zahratu Hilall (2014) Investigation on flow visualization of beetle mimicking ornithopter. Asian Journal of Applied Sciences, 02 (06). pp. 893-897. ISSN 2321-0893

Mohiuddin, A. K. M. and Chemani, Mohamed Fadhil and Zakaria, Mohd Baihaqi (2014) Design and investigation of a fuel cell car prototype. International Journal of Vehicle Systems Modelling and Testing, 9 (3/4). pp. 321-333. ISSN 1745-6444 (O), 1745-6436 (P)

Nurdin, Irwan and Johan, Mohd Rafie and Yaacob, Iskandar Idris and Ang, Beechin (2014) Effect of nitric acid concentrations on synthesis and stability of maghemite nanoparticles suspension. The Scientific World Journal, 2014. pp. 1-7. ISSN 2356-6140 E-ISSN 1537-744X

Nurdin, Irwan and Johan, Mohd Rafie and Yaacob, Iskandar Idris and Ang, Beechin and Andriyana, Andri (2014) Synthesis, characterisation and stability of superparamagnetic maghemite nanoparticle suspension. Materials Research Innovations, 18. S6-200-S6-203-S6-203. ISSN 1432-8917 E-ISSN 1433-075X

Okasha, Mohamed Elsayed Aly Abd Elaziz (2014) Guidance solutions for multiple vehicle assembly. Advanced Materials Research, 1016. pp. 797-801. ISSN 1022-6680

Okasha, Mohamed Elsayed Aly Abd Elaziz and Newman, Brett (2014) Guidance, navigation and control for satellite proximity operations using Tschauner-Hempel equations. The Journal of the Astronautical Science, 60 (1). pp. 109-136. ISSN 2195-0571 (O), 0021-9142 (P)

Okasha, Mohamed Elsayed Aly Abd Elaziz and Newman, Brett (2014) Relative motion guidance, navigation and control for autonomous orbital rendezvous. Journal of Aerospace Technology and Management, 6 (3). pp. 301-318. ISSN 1984-9648 E-ISSN 2175-9146

Omar, Nurihan and Aminanda, Yulfian and Syed Mohamed Ali, Jaffar (2014) Experimental study of impact on carbon-fiber-epoxy composite wing leading edge structure. Applied Mechanics and Materials, 493. pp. 672-677. ISSN 1660-9336

Rahman, Mohammed Ataur and Sharif, Sazzad and Mohiuddin, A. K. M. and Rashid, Muhammad Mahbubur and Hossain, Altab (2014) Energy efficient electromagnetic actuated CVT system. Journal of Mechanical Science and Technology, 28 (4). pp. 1153-1160. ISSN 1738-494X E-ISSN 1976-3824

Rashmi, W. and Ismail, Ahmad Faris and Khalid, M. and Anuar, A. and Yusaf, T. (2014) Investigating corrosion effects and heat transfer enhancement in smaller size radiators using CNT-nanofluids. Journal of Materials Science, 49 (13). pp. 4544-4551. ISSN 0022-2461 E-ISSN 1573-4803

Safri, S. N. A. and Hameed Sultan, Mohamed Thariq and Aminanda, Yulfian (2014) Impact characterisation of Glass Fibre Reinforced Polymer (GFRP) type C-600 and E-800 using a drop weight machine. Applied Mechanics and Materials, 629. pp. 461-466. ISSN 1660-9336

Seder, Islam M.F. and Ahmed, Mirghani Ishag and Ahmed, Shugata and Hawlader, M.N.A. (2014) Feasibility of double-layer microchannel fabrication at low speed micro end-mill and wire-cut EDM machines. Australian Journal of Basic and Applied Sciences, 8 (15). pp. 211-217. ISSN 1991-8178

Shah, Qasim Hussain and Aung, Kya Myo (2014) Investigation of glass plate failure mechanism subjected to copper and steel projectile impacts. IIUM Engineering Journal, 15 (1). pp. 17-31. ISSN 1511-788X

Shah, Qasim Hussain and Topa, Ameen (2014) Modeling large deformation and failure of expanded polystyrene crushable foam using LS-DYNA. Modelling and Simulation in Engineering, 2014 (292647). pp. 1-7. ISSN 1687-5591

Shasthri, Sevaguru and Venkatason, Kausalyah and Shah, Qasim Hussain and Abdullah, Kassim Abdulrahman and Idres, Moumen and Wong, Sha Voon (2014) Neck moment characterization of restrained child occupant at realistic nontest standard higher impact speed of 32.2 km/h. International Journal of Vehicular Technology, 2014. pp. 1-8. ISSN 16875702

Shasthri, Sevaguru and Venkatason, Kausalyah and Shah, Qasim Hussain and Abdullah, Kassim Abdulrahman and Idres, Moumen and Wong, Sha Voon (2014) Neck moment response characterization of restrained child occupant at standard test impact speed 24.4 km/h. Research Journal of Applied Sciences, Engineering and Technology, 8 (1). pp. 113-119. ISSN 2040-7459 E-ISSN 2040-7467

Shasthri, Sevaguru and Venkatason, Kausalyah and Shah, Qasim Hussain and Abdullah, Kassim Abdulrahman and Idres, Moumen and Wong, Sha Voon (2014) Parametric study for head injury criteria response of three-year olds in a child restraint system in oblique and lateral intrusive side impact. International Journal of Crashworthiness, 2014. pp. 1-11. ISSN 1358-8265 (Print), 1754-2111 (Online)

Shasthri, Sevaguru and Venkatason, Kausalyah and Shah, Qasim Hussain and Abdullah, Kassim Abdulrahman and Idres, Moumen and Wong , Sha Voon (2014) Parameter study of neck force in restrained 3 year old child involved in vehicle side impact. Australian Journal of Basic and Applied Sciences, 8 (9). pp. 145-154. ISSN 1991-8178

Shasthri, Sevaguru and Venkatason, Kausalyah and Shah, Qasim Hussain and Idres, Moumen and Abdullah, Kassim Abdulrahman and Wong, Sha Voon (2014) Lateral side impact crash simulation of restrained 3 year old child. Applied Mechanics and Materials, 663. pp. 590-595. ISSN 1660-9336

Sulaeman, Erwin and Ahmed, Layeeq (2014) Approximate function for unsteady aerodynamic kernel function of aeroelastic lifting surfaces. IIUM Engineering Journal, 15 (1). pp. 71-79. ISSN 1511-788X (P) 2289-7860 (O)

Syed Mohamed Ali, Jaffar and Syed Muhammad, Kashif and Shaik Dawood, Mohd. Sultan Ibrahim and Omar, Ashraf Ali (2014) Study on the effect of window opening on the drag characteristics of a car. International Journal of Vehicle Systems Modelling and Testing, 9 (3-4). pp. 311-320. ISSN 1745-6444 (O), 1745-6436 (P)

Teh, Seohhian and Johan, Mohd Rafie and Yaacob, Iskandar Idris (2014) Synthesis and characterisation of nanostructured Co-Pt magnetic films electrodeposited from tartrate-stabilised chloride baths. Materials Research Innovations, 18. S6-286-S6-290. ISSN 1432-8917 E-ISSN 1433-075X

Topa, Ameen and Shah, Qasim Hussain (2014) Numerical simulations of bulk metal forming process with smooth particle hydrodynamics. Australian Journal of Basic and Applied Sciences, 8 (15). pp. 198-204. ISSN 1991-8178

Venkatason, Kausalyah and Abdullah, Kassim Abdulrahman and Shasthri, Sevaguru and Idres, Moumen and Shah, Qasim Hussain and Wong, Sha Voon (2014) Injury analysis validation of a deformable vehicle front end model. Applied Mechanics and Materials, 465-66. pp. 1334-1338. ISSN 1660-9336

Venkatason, Kausalyah and Shasthri, Sevaguru and Abdullah, Kassim Abdulrahman and Idres, Moumen and Shah, Qasim Hussain and Wong, Sha Voon (2014) Head injury mitigation of an adult and child pedestrian in a frontal vehicle impact using response surface methodology. Applied Mechanics and Materials, 575. pp. 952-955. ISSN 1660-9336 (O), 978-303785262-0 (P)

Venkatason, Kausalyah and Shasthri, Sevaguru and Abdullah, Kassim Abdulrahman and Idres, Moumen and Shah, Qasim Hussain and Wong, Sha Voon (2014) Validation of pedestrian impactor testing upon hybrid vehicle front end profile. International Journal of Vehicle Systems Modelling and Testing, 9 (3/4). pp. 342-351. ISSN 1745-6444 (O), 1745-6436 (P)

Venkatason, kausalyah and shasthri, Sevaguru and Abdullah, Kassim Abdulrahman and Idres, Moumen and Shah, Qasim Hussain and Wong, Sha Voon (2014) Optimisation of vehicle front-end geometry for adult and pediatric pedestrian protection. International Journal of Crashworthiness. pp. 1-9. ISSN 1358-8265 (Print), 1754-2111 (Online)

Book Chapter

Hossain, Altab and Rahman, Mohammed Ataur (2014) Sensor-controlled intelligent vehicle systems: demand and needs for a global automotive landscape. In: Comprehensive material processing. Elsevier, Ltd, UK, pp. 473-497. ISBN 9780080965321

Hrairi, Meftah and Rizk, Abd El-Fattah (2014) Edge Crack, Bimaterial Systems. In: Encyclopedia of Thermal Stresses. Springer Reference, Netherlands, pp. 1085-1092. ISBN 978-94-007-2738-0 (P) ISBN 978-94-007-2739-7 (eBook) ISBN Bundle 978-94-007-2740-3 (print and electronic bundle)

Rizk, Abd El-Fattah and Hrairi, Meftah (2014) Edge crack, composite materials. In: Encyclopedia of Thermal Stresses. Springer Reference, Netherlands, pp. 1092-1100. ISBN 978-94-007-2738-0 (P) ISBN 978-94-007-2739-7 (eBook) ISBN Bundle 978-94-007-2740-3 (print and electronic bundle)

Rizk, Abd El-Fattah and Hrairi, Meftah (2014) Edge crack, isotropic material. In: Encyclopedia of Thermal Stresses. Springer Reference, Netherlands, pp. 1100-1109. ISBN 978-94-007-2738-0 (P) ISBN 978-94-007-2739-7 (eBook) ISBN Bundle 978-94-007-2740-3 (print and electronic bundle)

Proceeding Paper

Abd. Rahman, Mohamed and Mohiuddin, A. K. M. and Hanani, Abdullah (2014) Six sigma approach to improve the painting process: a case study of a Malaysian vehicle assembly company. In: International Conference on Advances in Manufacturing and Materials Engineering 2014 (ICAMME 2014), 23rd - 25th September 2014, Kuala Lumpur, Malaysia. (Unpublished)

Abdullah, Kassim Abdulrahman and Venkatason, Kausalyah and Shasthri, Sevaguru and Idres, Moumen and Shah, Qasim Hussain (2014) Development and optimization of a vehicle front-end geometry model for improved pedestrian safety. In: International Conference on Automotive and Vehicle Technologies (AVTECH '14), 16-18 October 2014, Yildiz Technical University, Istanbul, Turkey.

Abuzaid, Ahmed and Hrairi, Meftah and Shaik Dawood, Mohd. Sultan Ibrahim (2014) Derivation of stress intensity factor for a cracked plate with an integrated piezoelectric actuator. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2014), 23-25 September 2014, Kuala Lumpur. (Unpublished)

Ahmed, Mirghani Ishag and Seder, Islam M.F. and Ahmed, Shugata (2014) Feasibility of double-layer microchannel fabrication at low speed micro end-mill and wire-cut EDM machines. In: International Conference on Materials, Mechatronics, Manufacturing & Mechanical Engineering, 24-25 Oct 2014, Kuching , Sarawak, Malaysia . (Unpublished)

Ahmed, Shugata and Seder, Islam M.F. and Ab. Manaf, Hazli and Ahmed, Mirghani Ishak and Hawlader, Mohammad Nurul Alam (2014) Numerical investigation of flow boiling in double-layer microchannel heat sink. In: International conference on Materials,Mechatronics, Manufacturing & Mechanical Engineering 2014, 24th-25th September 2014, Kuching , Sarawak, Malaysia . (Unpublished)

Baradey, Y. and Hawlader, Mohammad Nurul Alam and Idres, Moumen and Ihsan, Sany Izan (2014) Improving the efficiency of poly-crystalline photovoltaic module using special transparent glass covers. In: International Meeting on Advances in Thermofluids, 26th-27th November 2014, Swiss Garden Hotel & Residences, Kuala Lumpur. (Unpublished)

Idres, Moumen and Suliman, Suliman and Kafafy, Raed Ismail and Shaik Dawood, Mohd. Sultan Ibrahim (2014) Orifice plate flowmeter performance under pulsating flow conditions. In: Automotive and Vehicle Technologies Conference (AVTECH) 2013, 2-4 Oct 2013, Yildiz Technical University, Istanbul, Turkey.

Manaf, Hazli and Ahmed, Shugata and Ahmed, Mirghani Ishak and Hawlader, Mohammad Nurul Alam (2014) A triangular double layer microchannel heat sink: effect of parallel and counter flow. In: 2nd International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2014), 23rd - 25th September 2014, Kuala Lumpur . (Unpublished)

Mohamed Ali, Jaafar Syed and F. Fatin, Bazilah (2014) Mirrorless car: a feasibility study. In: 2nd International Conference on Recent Advances in Automotive Engineering and Mobility Research, ReCAR 2013, 16-18 December 2013, Kuala Lumpur.

Mohammed Sapardi, Mohd Azan and Hussam, W. K. and Potherat, A. and Sheard, G. J. (2014) Three-dimensional linear stability analysis of the flow around a sharp 180-degree bend. In: 19th Australasian Fluid Mechanics Conference, 8 - 11 Dec 2014, Melbourne, Australia.

Mohammed Sapardi, Mohd Azan and Hussam, Wisam K. and Potherat, Alban and Sheard, Gregory J. (2014) Quasi-two-dimensional MHD duct flow around a 180-degree sharp bend in a strong magnetic field. In: 19th Australasian Fluid Mechanics Conference 2014, 8th-11th Dec. 2014, Melbourne, Australia.

Mohiuddin, A. K. M. (2014) Development of catalytic converter using low cost metal. In: International Conference on Advances in Manufacturing and Materials Engineering 2014 (ICAMME 2014), 23rd - 25th September 2014, Kuala Lumpur, Malaysia. (Unpublished)

Mohiuddin, A. K. M. and Abd. Rahman, Mohamed and Julia , Abdul Jabar (2014) Adoption and adaptation of Japanese manufacturing management: a case study of an automotive company in Malaysia. In: International Conference on Advances in Manufacturing and Materials Engineering 2014 (ICAMME 2014), 23rd - 25th September 2014, Kuala Lumpur, Malaysia. (Unpublished)

Mohiuddin, A. K. M. and Adeyemi, Nabeel A. (2014) Large eddy simulation modelling for transesterification of waste vegetable oil. In: IIUM Engineering Congress : 3rd International Conference on Mathematical Application in Engineering 2014, 23rd - 25th September 2014, Kuala Lumpur. (Unpublished)

Mohiuddin, A. K. M. and Mustaffa, Mohammad Edilan (2014) Modelling and simulation of spark ignition engine using water addition and validated through experimental envestigations. In: The 5th IASTED International Conference on Modelling, Simulation and Identification (MSI 2014), 16-18 July 2014, Banff, Canada.

Rahman, Mohammed Ataur and ., NurFarahana and Hawlader, Mohammad Nurul Alam (2014) Fuzzy controlled evaporative battery thermal management system for EV/HEV. In: ASME 2014 8th International Conference on Energy Sustainability co-located with ASME 2014 12th Fuel Cell Science, Engineering & Technology Conference, 30th June-2nd July 2014, Boston, MA, USA.

Rahman, Mohammed Ataur and Ahmed, Helmi and Hawlader, Mohammad Nurul Alam (2014) Noble evaporative battery thermal management system for EV/HEV. In: 4th International Conference on Industrial Engineering and Operations Management (IEOM) 2014, 7-9 Jan 2014, Bali, Indonesia.

Rashid, Muhammad Mahbubur and Molik, Md. Sazib and Rahman, Mohammed Ataur (2014) Design and development of a flying robot with improved time constant in rescue accident victims. In: 3rd International Conference on Mathematical Applications in Engineering (ICMAE'14), 23-25 Sept. 2014, Sunway Putra Hotel, Kuala Lumpur. (Unpublished)

Rashid, Muhammad Mahbubur and Molik, Md. Sazib and Rahman, Mohammed Ataur and Jahiman, Mohd Azmin (2014) The design and development of small electric vehicles (EV) using power inverter based AC motor. In: 3rd International Conference on Mathematical Applications in Engineering 2014 (ICMAE’14), 23rd-25th Sept. 2014, Sunway Putra Hotel, Kuala Lumpur. (Unpublished)

Ridhuan Siradj , Fadly Jashi Darsivan and Shahimi, Sharis Shazzali (2014) Ride quality comparison of a quarter car model with a nonlinear hydraulic damper and an andre hartford friction damper. In: International Conference on Innovative Trends in Multidisciplinary Academic Research (IMTAR 2014), 20th-21st October 2014, Istanbul, Turkey.

Syed Mohamed Ali, Jaffar (2014) Thermoelastic solutions for flexure of anisotropic cylindrical shells. In: 2nd International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2014), 23rd - 25th September 2014, Kuala Lumpur . (Unpublished)

Syed Mohamed Ali, Jaffar and Abeid Abeid , Rubeya (2014) LEADME : an educational software for composite laminate analysis and design. In: 2nd International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2014), 23rd - 25th September 2014, Kuala Lumpur . (Unpublished)

Zulkifli, Mohammad and Omar, Ashraf Ali and Asrar, Waqar (2014) Arbitrary Lagrangian-Eulerian Form of Flowfield Dependent Variation (ALE-FDV) Method for 3D Problems. In: 22nd Annual Conference of the CFD Society of Canada, 1-4 Jun 2014, Toronto Canada. (In Press)

ul-Haque, Anwar and Asrar, Waqar and Omar, Ashraf Ali and Sulaeman, Erwin and Syed Mohamed Ali, Jaffar (2014) Static longitudinal stability of a hybrid airship. In: 11th International Bhurban Conference on Applied Sciences & Technology (IBCAST), 14th-18th January 2014, Islamabad, Pakistan.