Items where Division is "Kulliyyah of Engineering > Department of Mechanical Engineering" and Year is 2013

Shahimi, Sharis Shazzali and Ridhuan Siradj , Fadly Jashi Darsivan (2013) Modeling and simulation of a quarter car model with a nonlinear damper. In: nternational Conference on Mechanical, Automotive and Aerospace Engineering 2013, 2-4 July 2013, Kuala Lumpur.

Abdullah, Kassim Abdulrahman and Nimir, Yassin Lutfi Mahmud (2013) Structural analysis of the frontal part of a local car model for crashworthiness. In: 24th IASTED International Conference on Modelling and Simulation, 17th-19th July 2013, Banff, Canada.

Abdullah, Nur Azam and Sulaeman, Erwin (2013) Flutter analysis of supersonic wing with external stores. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2013), 2nd- 4th July 2013, Berjaya Time Square Hotel, Kuala Lumpur. (Unpublished)

Adeyemi, Nabeel A. and Mohiuddin, A. K. M. and Mohd Nor, Mohd Iskandr (2013) CFD modeling of waste cooking oil transesterification in a stirred tank reactor. World Applied Sciences Journal , 21. pp. 151-158. ISSN 1818-4952

Ahmad Shuhaili, Ahmad Fadzil and Ihsan, Sany Izan and Faris, Waleed Fekry (2013) Air pollution study of vehicles emission in high volume traffic: Selangor, Malaysia as a case study. WSEAS Transactions on Systems , 12 (2). pp. 67-84. ISSN 2224-2678 (O), 1109-2777 (P)

Ashfaq, Syed and Khan, Sher Afghan (2013) Studies on flow from convergent nozzle with sudden expansion and control effectiveness under the influence of micro jets. International Journal of Research in Mechanical Engineering & Technology (IJRMET) , 4 (1). pp. 76-87. ISSN 2249-5770 E-ISSN 2249-5762

Ashfaq, Syed and Khan, Sher Afghan and Rathakrishnan, Ethirajan (2013) Active control of flow through the nozzles at sonic Mach number. International Journal of Emerging trends in Engineering and Development (IJETED), 2 (3). pp. 73-80. ISSN 2249-6149

Azami, Muhammad Hanafi and Kafafy, Raed and Idres, Moumen (2013) Simulation of wheel type fuel grain in hybrid rocket motor. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2013), 2 - 4 July 2013, Kuala Lumpur, Malaysia. (Unpublished)

Bahar, Rubina and Hawlader, Mohammad Nurul Alam (2013) Desalination: conversion of seawater to freshwater. In: 2nd International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2013), 2nd-4th July 2013, Kuala Lumpur, Malaysia.

Baradey, Y. and Hawlader, Mohammad Nurul Alam and Idres, Moumen and Ihsan, Sany Izan (2013) Performance evaluation of PV module using water filters and infrared reflective glass covers. In: International Conference on Mechanical, Industrial and Materials Engineering 2013 (ICMIME2013) , 1-3 November 2013, Rajshahi, Bangladesh.

Chowdhury, Md. Sazzad Hossien and Razali, NurIsnida and Ali, Sellami and Rahman, Mohammad Mustafizur (2013) A new reliable algorithm for analytical treatment of differential and integral equations. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2013), 19-20 February 2010, Kuala Lumpur.

Crasta, Asha and Khan, Sher Afghan (2013) Stability derivatives of a delta wing with straight leading edge in the Newtonian limit. International Journal of Engineering Research and Application, 4 (2). pp. 1482-1488. ISSN 2248-9622

Crasta, Asha and Khan, Sher Afghan (2013) Stabilty derivatives in the newtonian limit. International Journal of Advanced Research in Engineering & Technology (IJARET), 4 (7). pp. 276-289. ISSN 0976-6480

Echrif, Salah B. M. and Hrairi, Meftah (2013) An investigation of temperature effect on incremental forming. In: 2nd International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2013), 2-4 July 2013, Kuala Lumpur, Malaysia. (Unpublished)

FB, Sayyad and B., Kumar and Khan, Sher Afghan (2013) Approximate analytical method for damage detection in free–free beam by measurement of axial vibrations. International Journal of Damage Mechanics, 22 (1). pp. 133-142. ISSN 1530-7921

Hameed, Amar Hasan and Kafafy, Raed and Asrar, Waqar and Idres, Moumen (2013) Two-dimensional flow properties of micronozzle under varied isothermal wall conditions. International Journal of Engineering Systems Modelling and Simulation, 5 (4). pp. 174-180. ISSN 1755-9766

Hasan, Muhammad and Idres, Moumen and Abdelrahman, Mohammad (2013) Black box nonlinear model predictive control using recurrent neural network. In: 2nd International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2013), 2-4 July 2013, Kuala Lumpur, Malaysia.

Hawlader, Mohammad Nurul Alam (2013) Utilization of solar energy and waste heat for water heating, drying and desalination of seawater. In: International Conference on Mechanical, Industrial and Material Engineering (ICMIME 2013), 1-3 November 2013, Rajshahi, Bangladesh.

Hrairi, Meftah (2013) Development of a thermoelectrically air conditioned motorcycle helmet. Research Report. s.n, Kuala Lumpur. (Unpublished)

Hrairi, Meftah and Abdullah, Abdullah F. and Ahmed, Mirghani Ishak (2013) Cooling of motorcyclist helmet with thermoelectric module. Middle-East Journal of Scientific Research, 13. pp. 103-108. ISSN 1990-9233

Hrairi, Meftah and Baharom, Badrul Hanafi (2013) Design and modelling of silicon MEMS accelerometer. International Journal of Engineering Systems Modelling and Simulation, 5 (4). pp. 181-187. ISSN 1755-9766

Ihsan, Sany Izan and Hrairi, Meftah and Khalifa, Othman Omran (2013) Course Continual Quality Improvement (CQI) implementation of Outcome-Based Education (OBE) in engineering education: the Kulliyyah of Engineering, IIUM experience. In: International Conference on Engineering Education 2013, 22nd-25th Dec. 2013, Madinah, Kingdom of Saudi Arabia.

Islam, Mazharul (2013) Analysis of the plug-in hybrid electric vehicle for the smart grid of Canada. International Journal of Environmental Studies, 70 (5). pp. 733-743. ISSN 0020-7233 E-ISSN 1029-0400

Javeed, Abdulhakeem and Kafafy, Raed and Idres, Moumen and Ihsan, Sany Izan (2013) Frequency estimation of flow induced vibration in thin cantilever plate. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2013), 2 - 4 July 2013, Kuala Lumpur, Malaysia. (Unpublished)

Kafafy, Raed and Azami, Muhammad Hanafi and Idres, Moumen (2013) Hybrid rocket performance with varying additive concentrations. In: 49th AIAA/ASME/SAE/ASEE Joint Propulsion Conference, July 14 - 17, 2013, San Jose, CA . (Unpublished)

Kafafy, Raed and Javeed, Abdulhakeem and Ihsan, Sany Izan and Idres, Moumen (2013) Experimental investigation of the performance of flutter-based microgenerators. In: 11TH INTERNATIONAL ENERGY CONVERSION ENGINEERING CONFERENCE, July 14 - 17, 2013, San Jose, CA, USA.

Kafafy, Raed Ismail and Azami, Hanafi and Idres, Moumen (2013) Effectiveness of wheel-typed grain design for hybrid rocket motor performance. In: Recent Advances in Energy, Environment and Development Conference, 30 Jan-01 Feb 2013, Cambridge, MA.

Kamel, Mohammed and Idres, Moumen and Owis, Farouk and Hashem, Ali (2013) Towards a numerical simulation of supersonic mixing & combustion. LAP Lambert Academic Publishing, Saarbrucken. ISBN 9783659387043

Kolo, Isa and Idres, Moumen and Kafafy, Raed and Shaik Dawood, Mohd. Sultan Ibrahim (2013) Three-dimensional vibration analysis of fluid-filled pipes. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2013), 2 - 4 July 2013, Kuala Lumpur, Malaysia. (Unpublished)

Mohammad Abdelrahman, Mohammad Ibraheem (2013) Spacecraft sun-pointing using coplanar solar panels data and magnetic field measurements. In: 64rd International Astronautical Congress (64 IAC), 23-27 September, 2013, Beijing, China.

Mohammed, Mohammed Idris and Mustapha, Faizal and Hrairi, Meftah and Sulaeman, Erwin and Mohd Khairol, Anuar and Dyang, Laila and Hojazi, Farzad (2013) Penang bridge 1 loading analysis using British standard and finite element method for structural health monitoring. In: 2nd International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2013), 2-4 July 2013, Kuala Lumpur, Malaysia.

Mohiuddin, A. K. M. and Adeyemi, Nabeel and Muyibi, Suleyman (2013) 3-D CFD transient simulation of transesterification in stirred tank reactor. In: 2nd International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2013), 2-4 July 2013, Kuala Lumpur, Malaysia.

Mohiuddin, A. K. M. and Adeyemi, Nabeel A. (2013) Numerical simulation of biodiesel production using waste cooking oil. In: ASME 2013 International Mechanical Engineering Congress & Exposition (IMECE 2013), 15-21 Nov 2013, San Diego, CA, USA.

Mohiuddin, A. K. M. and Chemani, Mohamed Fadhil and Zakaria, Mohd Baihaqi (2013) Design and Development of a Fuel Cell Car Prototype. In: 2nd International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2013), 2-4 July 2013, Kuala Lumpur, Malaysia.

Okasha, Mohamed Elsayed Aly Abd Elaziz and Kamalaldin, Karim (2013) Low earth orbit design for remote sensing applications. In: International Conference on Mechanical, Automotive and Aerospace Engineering 2013, 2 - 4 July 2013, Berjaya Time Square Hotel, Kuala Lumpur. (Unpublished)

Okasha, Mohamed Elsayed Aly Abd Elaziz and Mohammad Abdelrahman, Mohammad Ibraheem (2013) Satellite orbit and attitude simulator: design and implementation. In: 2nd International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2013), 2-4 July, 2013, Berjaya Times Square Hotel, Kuala Lumpur.

Okasha, Mohamed Elsayed Aly Abd Elaziz and Park, Chandeok and Park, Sang-Young (2013) Autonomous multi satellites assembly in keplerian orbits. In: AIAA Guidance, Navigation, and Control (GNC) Conference, 19-22 August 2013, Boston, Massachusetts.

Ong, Jiunn Chit and Omar, Ashraf Ali E. and Asrar, Waqar (2013) A BGK-based two-equation turbulence model algorithm for solving compressible navier-stokes equations. CFD Letters, 6 (2). pp. 46-61. ISSN 2180-1363

P M, Aaqib Rashad and Hrairi, Meftah and M, Santhosham and Boopathy, Rajendra (2013) Study of hardness and microstructure of Fe-C-Si-Mn-B hardfacing alloy. In: 2nd International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2013), 2-4 July 2013, Kuala Lumpur, Malaysia.

Rahman, Mohammed Ataur and Hossain, Altab and Rashid, Muhammad Mahbubur (2013) Fuzzy control enerygy efficient hybrid engine for small scale vehicle. Research Journal of Applied Science, Engineering and Technology. ISSN 2040-7467 (In Press)

Rahman, S. M. A. and Saidur , Rahman and Hawlader, Mohammad Nurul Alam (2013) An economic optimization of evaporator and air collector area in a solar assisted heat pump drying system. Energy Conversion and Management, 76. pp. 377-384. ISSN 0196-8904

Rashmi, W. and Khalid, M. and Ismail, Ahmad Faris and Saidur, R. and Rashid, A. K. (2013) Experimental and numerical investigation of heat transfer in CNT nanofluids. Journal of Experimental Nanoscience, 10 (7). pp. 1-19. ISSN 1745-8099

Razali, Nur Isnida and Chowdhury, Md. Sazzad Hossien and Asrar, Waqar (2013) The multistage Adomian Decomposition Method for solving chaotic Lü System. Middle-East Journal of Scientific Research, 13. pp. 43-49. ISSN 1990-9233

Ridhuan Siradj , Fadly Jashi Darsivan and Hamid, Mohd. Helmi and Abdullah, Mohamad Fahmi (2013) Nonlinear model identification of a shock absorber dynamics. In: Automotive and Vehicle Technologies Conference (AVTECH) 2013, 2-4 Oct 2013, Yildiz Technical University, Istanbul, Turkey. (Unpublished)

Shah, Qasim Hussain and Hamdani, Adib (2013) The damage of unconfined granite edge due to the impact of varying stiffness projectiles. International Journal of Impact Engineering, 59. pp. 11-17. ISSN 0734-743X

Sharif, Sazzad and Rahman, Mohammed Ataur and Mohiuddin, A. K. M. and Hossain, Altab (2013) Study on the development of a fuzzy logic control electromagnetic actuated CVT system. International Journal of Engineering Systems Modelling and Simulation, 5 (4). pp. 217-225. ISSN 1755-9766

Sulaeman, Erwin and Layeeq, Ahmed (2013) Alternate approximate function for kernel function of oscillating lifting surfaces. In: International Conference on Mechanical, Automotive and Aerospace Engineering 2013, 2 - 4 July 2013, Berjaya Time Square Hotel, Kuala Lumpur. (Unpublished)

Suliman , M. M. Ali and Omar, Ashraf Ali and Syed Mohamed Ali, Jaffar (2013) Flow visualization over a circular planform wing. In: 2nd International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE' 13), 2-4 July 2013, Kuala Lumpur, Malaysia. (Unpublished)

Suliman , M. M. Ali and Omar, Ashraf Ali and Syed Mohamed Ali, Jaffar and M. Syuhairi |, M. Husain (2013) Numerical simulation of a low aspect ratio wing at low Reynolds number. In: 2nd International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE' 13), 2-4 July 2013, Kuala Lumpur, Malaysia. (Unpublished)

Syed, Syed Ashfaq and Khan, Sher Afghan (2013) Sonic Under Expanded Flow Control With Micro Jets. International Journal of Engineering Research and Application, 3 (6). pp. 1482-1488. ISSN 2248-9622

Syed, Syed Ashfaq and Khan, Sher Afghan and E., Rathakrishnan (2013) Control of suddenly expanded flow for area ratio 3.61. International Journal of Advanced Scientific and Technical Research (IJAST, 6 (3). pp. 1-11. ISSN 2249-9954

Syed Mohamed Ali, Jaffar and ., Hasna Nur Fadhila and Aziz, Nor Azhanadia (2013) Educational software for stress analysis of idealized thin walled open sections. Applied Mechanics and Materials, 315. pp. 339-343. ISSN 1660-9336 (O), 978-303785262-0 (P)

Syed Mohamed Ali, Jaffar and Abdullah, Kassim Abdulrahman and Aminanda, Yulfian (2013) Effect of cross sectional shape on the energy absorbing characteristics of a tube under quasi-static loading. Applied Mechanics and Materials, 315. pp. 334-338. ISSN 1660-9336

Syed Mohamed Ali, Jaffar and Muhammad Muhaimin, M.Y. and Muhammad Faizal, C.N (2013) Design and development of IIUM hovercraft. In: 2nd International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE' 13), 2-4 July 2013, Kuala Lumpur, Malaysia. (Unpublished)

Syed Mohamed Ali, Jaffar and Shaik Dawood, Mohd. Sultan Ibrahim and Syed Muhammad, Kashif and Tariq, M. (2013) Analysis of composite box beam with piezoelectric actuators using ANSYS. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE' 13), 2nd-4th Jul. 2013, Kuala Lumpur, Malaysia.

Syed Muhammad, Kashif and Shaik Dawood, Mohd. Sultan Ibrahim and Abdur Razzak, M. and Azram, Mohammad and UNSPECIFIED (2013) Study of the effect of different curing setups on mechanical properties of low cost composite structures. In: 2nd International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2013), 2-4 July 2013, Kuala Lumpur, Malaysia. (Unpublished)

Tahmasebpour, Kamyar and Shobaki, Mohammed M. and Hrairi, Meftah (2013) Design and optimization of a micro capacitive pressure sensor. In: 2nd International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2013), 2-4 July 2013, Kuala Lumpur, Malaysia.

Venkatason, Kausalyah and Shasthri, Sevaguru and Abdullah, Kassim Abdulrahman and Idres, Moumen and Shah, Qasim Hussain and Wong, Sha Voon (2013) Crash kinematics and injury criteria validation for a deformable hybrid vehicle model. Applied Mechanics and Materials, 663. pp. 627-631. ISSN 1660-9336

Venkatason, Kausalyah and Shasthri, Sevaguru and Abdullah, Kassim Abdulrahman and Idres, Moumen and Shah, Qasim Hussain and Wong, Sha Voon (2013) Injury analysis validation of a deformable vehicle. Applied Mechanics and Materials, 465/66. pp. 1334-1338. ISSN 1660-9336

Zayan, Jalal Mohammad and Asrar, Waqar and Hoda, Asif (2013) Experimental investigation of a vertical round free turbulent jet. In: 2nd International Conference on Mechanical, Automotive and Aerospace Engineering 2013, 2 - 4 July 2013, Berjaya Time Square Hotel, Kuala Lumpur.