Items where Division is "Kulliyyah of Engineering > Department of Mechanical Engineering" and Year is 2008

A

Ahamad, Syed Masrur and Khan, Md. Raisuddin and Rahman, Md. Mozasser (2008) Inverse Kinematics of a Hyper-Redundant Robotic Manipulator. In: Proceedings of the 3rd International Conference on Mechatronics (ICOM '08), 18 - 22 December 2008, IIUM, Kuala Lumpur, Malaysia.

B

BenLahcene, Zohir and Faris, Waleed Fekry and Khan, Md. Raisuddin and Ihsan, Sany Izan (2008) Semi-active suspension system for off-road vehicles. In: 3rd International Conference on Mechatronics, ICOM’08, 18 - 20 December 2008, Kuala Lumpur, Malaysia.

C

Castanie, Bruno and Aminanda, Yulfian and bouvet, christophe and barrau, jean-jacques (2008) Core crush criterion to determine the strength of sandwich composite structures subjected to compression after impact. Composite Structures, 32 (3). pp. 1-8. ISSN S0263-8223(08)00086-X

Castanie, Bruno and Bouvet, Christophe and Aminanda, Yulfian and Barrau, Jean-Jacques and Thevenet, Pascal (2008) Modelling of low-energy/low-velocity impact on Nomex honeycomb sandwich structures with metallic skins. International Journal of Impact Engineering, 35 (7). pp. 620-634. ISSN 0734-743X

D

Darsivan, Fadly Jashi and Faris, Waleed Fekry and Martono, Wahyudi (2008) Active engine mounting controller using extended minimal resource allocating networks. International Journal of Vehicle Noise and Vibration, 4 (2). pp. 150-168. ISSN 1479-148X (O),1479-1471 (P)

F

Faris, Waleed Fekry and Ihsan, Sany Izan and Ahmadian, Mehdi (2008) Analysis of semiactive suspension systems using half-car model. In: FISITA 2008 World Automotive Congress, 14-19 September 2008, Munich, Germany. (Unpublished)

H

Hasim, Fadilah and Rusyadi, Rusman and Indra Surya, Wijaya and ., Fariduzzaman and Asrar, Waqar and Omar, Ashraf Ali and Syed Mohamed Ali, Jaffar and Aminanda, Yulfian and Kafafy, Raed (2008) Flow field characteristics of the IIUM low speed wind tunnel. In: 3rd International Symposium on Advanced Fluid/Solid Science and Technology in Experimental Mechanics, 7-10 Dec. 2008, Taiwan. (Unpublished)

Hasim, Fadilah and Rusyadi, Rusman and Surya, Wijaya Indra and , Fariduzzaman and Asrar, Waqar and Omar, Ashraf Ali and Syed Mohamed Ali, Jaffar and Aminanda, Yulfian and Kafafy, Raed (2008) The IIUM low speed wind tunnel. In: 2nd Engineering Conference on Sustainable Engineering Infrastructures Development & Management, 18-19 December 2008, Kuching Serawak. (Unpublished)

Hossain, Altab and Rahman, Mohammed Ataur and Mohiuddin, A. K. M. and Iqbal, A.K.M. P. (2008) Modeling of the developed flexible skirt air-cushion track vehicle model. In: 4th BSME-ASME International Conference on Thermal Engineering, 27-29 December 2008, Dhaka, Bangladesh.

Hussain Shah, Qasim and Abakrb, Yousif A. (2008) Effect of distance from the support on the penetration mechanism of clamped circular polycarbonate armor plates. International Journal of Impact Engineering, 35. pp. 1244-1250. ISSN 0734-743X

I

Ihsan, Sany Izan and Faris, Waleed Fekry and Ahmadian, Mehdi (2008) Analysis of control policies and dynamic response of a Q-car 2-DOF semi active system. Shock and Vibration, 15 (5). pp. 573-582. ISSN 1070-9622

Ihsan, Sany Izan and Faris, Waleed Fekry and Ahmadian, Mehdi (2008) An assessment of semi-active suspension for passenger cars using full-car model. In: The 13th International Conference on Applied Mechanics and Mechanical Engineering (AMME), 27 - 28 May 2008, Cairo, Egypt. (Unpublished)

Islam, Mazharul and Amin, M. Ruhul and Ting, David S-K and Fartaj, Amir (2008) Selection of airfoils for straight-bladed vertical axis wind turbines based on desirable aerodynamic characteristics. In: 2008 International Mechanical Engineering Congress and Exposition, 31st Oct.- 6th Nov. 2008, Boston, Massachusetts, USA.

Islam, Mazharul and Amin, M. Ruhul and Ting, David S-K and Fartaj, Amir (2008) A new airfoil for the supporting struts of smaller-capacity straight-Bladed VAWT. In: 12th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, 10th-12th Sept. 2008, Victoria, British Columbia, Canada.

Islam, Mazharul and Fartaj, Amir and Carriveau, Rupp (2008) Analysis of the design parameters related to a fixed-pitch straight-bladed vertical axis wind turbine. Wind Engineering, 32 (5). pp. 491-507. ISSN 0309-524X E-ISSN 2048-402X

Islam, Mazharul and Ting, David and Fartaj, Amir (2008) Aerodynamic models for Darrieus-type straight-bladed vertical axis wind turbines. Renewable and Sustainable Energy Reviews, 12 (4). pp. 1087-1109. ISSN 1364-0321

K

Kashif, Syed Muhammad and Toussaint, Evelyne and Gre´diac, M. and Avril, Ste´phane and Kim, J. H. (2008) Characterization of composite plates using the virtual fields method with optimized loading conditions. Composite Structures, 85 (1). pp. 70-82. ISSN 02638223

M

Margueres, Phillippe and Lopez Torres, Jorge and Perie, Jean-Noel and Kashif, Syed Muhammad and Collombet, Francis (2008) Combined approach for the characterization of composites manufactured by RFI and industrial application. Journal of Composite Materials, 42 (2). pp. 189-209. ISSN 0021-9983

Mohiuddin, A. K. M. and Ashour, Ahmed Aly Ibrahim Shaaban and Yap, Haw Shin (2008) Design optimization of valve timing at various engine speeds using Multi-Objective Genetic Algorithm (MOGA). In: 19th IASTED International Conference Modelling and Simulation, 26 - 28 May, 2008, Quebec City, Quebec, Canada.

Mohiuddin, A. K. M. and Ideres, Mohd Rashidin and Mohd Hashim, Shukri (2008) Experimental analysis of noise and back pressure for muffler design. Jurnal Kejuruteraan, 20. pp. 151-161.

Mohiuddin, A. K. M. and Rahman, Mohammed Ataur and Alias, Arfah and Farraen, M.A. (2008) Investigation and probable solution of low end torque dip problem of CAMPRO 1.6L Engine. International Journal of Mechanical and Materials Engineering (IJMME), 3 (2). pp. 176-186. ISSN 1823-0334

Mohiuddin, A. K. M. and Rahman, Mohammed Ataur and Alias, Arfah and Farraen, M.A. (2008) Probable solution of torque dip problem of CAMPRO 1.6L engine. In: 4th BSME-ASME International Conference on Thermal Engineering, 27-29 December, 2008, Dhaka, Bangladesh.

Mohiuddin, A. K. M. and Rahman, Mohammed Ataur and Alias, Arfah and M. A, Farraen (2008) Investigation of low end torque dip problem of CAMPRO 1.6L engine. In: 13th International Conference on Applied Mechanics and Mechanical Engineering, 27-29 May 2008, Cairo, Egypt.

O

Ong, Jiunn Chit and Omar, Ashraf Ali and Asrar, Waqar and Ismail, Ahmad Faris (2008) A gas-kinetic BGK solver for two-dimensional turbulent compressible flow. In: International Conference on Scientific Computing , July 14-17, 2008, Las Vegas, Nevada, USA.

P

Patwari, Muhammed Anayet Ullah and Amin, A. K. M. Nurul and Faris, Waleed Fekry (2008) Response surface methodology approach for chip serration Frequency Prediction in milling. International Journal of Advanced Manufacturing Technology. pp. 1-17. ISSN 1433-3015 (O); 0268-3768 (P) (In Press)

Patwari, Muhammed Anayet Ullah and Amin, A. K. M. Nurul and Faris, Waleed Fekry and Alam, S. (2008) Computational analysis for the prediction chip serration frequency in end milling of steel AISI1020. In: Malaysian Metallurgical Conference, MMC 2008, 3 - 4 December 2008, UKM, Bangi, Malaysia.

Patwari, Muhammed Anayet Ullah and Amin, A. K. M. Nurul and Faris, Waleed Fekry and Alam, S. (2008) Investigations of the causes of chatter in computer aided manufacturing process during end milling operation. In: Third International Conference on Mechatronics (ICOM) 2008, 18 - 20 December 2008, Kuala Lumpur, Malaysia.

Patwari, Muhammed Anayet Ullah and Amin, A. K. M. Nurul and Faris, Waleed Fekry and Alam, S. (2008) Prediction model of cutting force by cutting parameters using response surface methodology in end milling of steel AISI 1020. In: The 2nd International & 23rd All India Manufacturing Technology Design and Research Conference, 15 - 17 December 2008, Chennai, India.

Patwari, Muhammed Anayet Ullah and Amin, A. K. M. Nurul and Faris, Waleed Fekry and Alam, S. and Ginta, Turnad Lenggo (2008) A statistical approach for the prediction of cutting forces in end milling of medium carbon steel (S45C). In: International Conference on Science & Technology: Applications in Industry & Education, 12-13 December 2008, Pulau Pinang, Malaysia.

Patwari, Muhammed Anayet Ullah and Amin, A. K. M. Nurul and Faris, Waleed Fekry and Ginta, Turnad Lenggo and Alam, S. and Lajis, M. A. (2008) Development of an artificial neural network model for the prediction of the chip serration frequency in end milling of medium carbon steel. In: International Conference of Curtin University of Science and Technology Engineering (CUTSE 2008), 24 - 27 November 2008, Sarawak, Malaysia.

Patwari, Muhammed Anayet Ullah and Amin, A. K. M. Nurul and Faris, Waleed Fekry and Ishtiyaq, M. H. (2008) Mathematical model of chip serration frequency in end milling of Inconel 718. In: International Conference on Mechanical Engineering (ICME 2008), 21-23 May, 2008, Johor Baru, Malaysia.

R

Rahman, Mohammed Ataur and Hossain, Altab and Mohiuddin, A. K. M. (2008) Integrated mechanics for design of the hybrid electrical aircushion track vehicle for swamp peat. In: 4th BSME-ASME International Conference on Thermal Engineering, 27-29th December 2008, Dhaka, Bangladesh.

Rahman, Mohammed Ataur and Mohiuddin, A. K. M. and Irwan, I. and Azoa, A. and Adly, A. (2008) Design and development of an automatic car door opening and locking system. In: 3rd International Conference on Mechatronics, ICOM'08, 18 - 20 December 2008, Kuala Lumpur, Malaysia.

Rashmi, W. and Ismail, Ahmad Faris and Asrar, Waqar and Khalid, M. and Yusof, Faridah (2008) Natural convection heat transfer in nanofluids - a numerical study. In: Proceedings of the 7th Symposium on Transport Phenomenon in Manufacturing Processes 2008, August 10–14, 2008, Jacksonville, Florida, USA.

Rehman, Shafiqur and Khan, Sher Afghan (2008) Control of base pressure with micro jets:part-I. Aircraft Engineering and Aerospace Technology, 80 (2). pp. 158-164. ISSN 0002-2667

S

Shaik Dawood, Mohd. Sultan Ibrahim and Iannucci, Lorenzo and Greenhalgh, Emile S. (2008) Three-dimensional static shape control analysis of composite plates using distributed piezoelectric actuators. Smart Materials and Structures, 17 (2). pp. 1-10. ISSN 0964-1726