Items where Division is "Kulliyyah of Engineering > Department of Mechanical Engineering" and Year is 2007

Article

Abdul Hakim, Saidur Rahman and Md., Hasanuzzaman and Abdul Sattar, M. and Hassan, Masjuki and Magami, Irfan Anjum and Mohiuddin, A. K. M. (2007) An analysis of energy use, energy intensity and emissions at the industrial sector of Malaysia. International Journal of Mechanical and Materials Engineering (IJMME), 2 (1). pp. 84-92. ISSN 1823-0334

Aminanda, Yulfian and Castanie, Bruno and Barrau, Jean-Jacques (2007) Behavior of indented sandwiches structure with Nomex honeycomb core and metallic skins subjected to compressive loading (CAI). Key Engineering Materials, 345. pp. 729-732. ISSN 1662-9795

Ihsan, Sany Izan and Faris, Waleed Fekry and Ahmadian, Mehdi (2007) Dynamics and control policies analysis of semi-active suspension systems using a full-car model. International Journal of Vehicle Noise & Vibration, 3 (4). pp. 370-405. ISSN 1479-148X

Islam, Mazharul and Ting, David S-K and Fartaj, Amir (2007) Design of a special-purpose airfoil for smaller-capacity straight-bladed VAWT. Wind Engineering, 31 (6). pp. 401-424. ISSN 0309-524X E-ISSN 2048-402X

Islam, Mazharul and Ting, David S-K. and Fartaj, Amir (2007) Desirable airfoil features for smaller-capacity straight-bladed VAWT. Wind Engineering, 31 (3). pp. 165-196. ISSN 0309-524X E-ISSN 2048-402X

Islam, Mazharul and Ting, David S‐K. and Fartaj, Amir (2007) Assessment of the small‐capacity straight‐bladed VAWT for sustainable development of Canada. International Journal of Environmental Studies, 64 (4). pp. 489-500. ISSN 0020-7233 E-ISSN 1029-0400

Kim, J.-H. and Pierron, F. and Wisnom, M. R. and Kashif, Syed Muhammad (2007) Identification of the local stiffness reduction of a damaged composite plate using the virtual fields method. Composites Part A: Applied Science and Manufacturing, 38 (Pt A). pp. 2065-2075. ISSN 1359835X

M. K., Nor Khairusshima and Amin, A. K. M. Nurul and Ismail, Ahmad Faris (2007) Effectiveness of uncoated WC-Co and PCD inserts in end milling of aluminum silicon carbide (AlSiC). Journal of Materials Processing Technology, 192-3. pp. 147-158. ISSN 0924-0136

Mohiuddin, A. K. M. and ., Muhamamd Nurhafez (2007) Experimental analysis and comparison performance characterisation of catalytic converters including simulation. International Journal of Mechanical and Materials Engineering (IJMME), 2 (1). pp. 1-7. ISSN 1823-0334

Mohiuddin, A. K. M. and Rahman, Mohammed Ataur and Gazali, Yazid (2007) Simulation and experimental investigation of muffler performance. International Journal of Mechanical and Materials Engineering (IJMME), 2 (2). pp. 118-124. ISSN 1823-0334

Mohiuddin, A. K. M. and Rahman, Mohammed Ataur and Mohd Subri, Mohd Dzaidin (2007) Optimal design of automobile exhaust system using GT-power. International Journal of Mechanical and Materials Engineering (IJMME), 2 (1). pp. 40-47. ISSN 1823-0334

Mohiuddin, A. K. M. and Saidur, R. and Sattar, M.A. and Rahman, Mohammed Ataur (2007) Comparison of drift eliminators characteristics in evaporative condenser and spray-filled tower. International Energy Journal, 8 (3). pp. 155-162. ISSN 1513-718X

Rahman, Mohammed Ataur and Mohiuddin, A. K. M. and Hossain, Altab (2007) Effectiveness of the developed instrumentation system on the vehicle tractive performance measurement. International Journal of Mechanical and Materials Engineering (IJMME), 2 (2). pp. 189-199. ISSN 1823-0334

Rahman, Mohammed Ataur and Yahya, Azmi and Mohiuddin, A. K. M. (2007) Mobility investigation of a designed and developed segmented rubber track vehicle on Sepang peat terrain in Malaysia. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 221. pp. 789-800. ISSN 0954-4070

Shah, Qasim H. and A Abakr, Yousif (2007) A comparison of energy absorbing capabilities of paper and steel structures subjected to progressive failure under free falling objects. Journal of Engineering Science and Technology, 2 (2). pp. 200-210. ISSN 18234690

Shah, Qasim Hussain and Abakrb, Yousif A. (2007) A comparison of energy absorbing capabilities of paper and steel structures subjected to progressive failure under free falling objects. Journal of Engineering Science and Technology , 2 (2). pp. 200-210. ISSN 1823-4690

Proceeding Paper

Hafiz, A. K. M. and Amin, A. K. M. Nurul and Karim, A.N. Mustafizul and Lajis, Mohd Amri (2007) Development of surface roughness prediction model using response surface methodology in high speed end milling of AISI H13 tool steel. In: International Conference on Industrial Engineering and Engineering Management, 2 - 5 December 2007, Singapore.

Ihsan, Sany Izan and Faris, Waleed Fekry and Ahmadian, Mehdi (2007) Analysis of quarter-car 2 degree-of-freedom semiactive systems. In: IASTED Asian Conference on Modelling and Simulation, 8 October 2007 through 10 October 2007, Beijing, China.

Mohiuddin, A. K. M. and Rahman, Mohammed Ataur and Gazali, Yazid (2007) Experimental investigation and simulation of muffler performance. In: International Conference on Mechanical Engineering 2007 (ICME 2007), 29-31 December, 2007, Dhaka, Bangladesh.

Rahman, Mohammed Ataur and Mohiuddin, A. K. M. and Hossain, Altab and Noraini, N. and Irwan, I. (2007) Mobility of the LGP-30 wheeled vehicle on peat terrain in Malaysia. In: International Conference on Mechanical Engineering 2007 (ICME 2007), 29-31 December, 2007, Dhaka, Bangladesh.

Rahman, Mohammed Ataur and Mohiuddin, A. K. M. and Hossain, Altab and Nursyifa, S. and Nora, A. and Hidayah, N. and Eshah, J. (2007) A ¼ scale hybrid full-tracked air-cushion vehicle for swamp peat terrain in Malaysia. In: International Conference on Mechanical Engineering 2007 (ICME 2007), 29 - 31 December, 2007, Dhaka, Bangladesh.

Ridhuan Siradj , Fadly Jashi Darsivan and Wahyudi, Martono and Faris, Waleed Fekry and Ata, A.A (2007) Artificial neural network based vibration control of active engine mounting isolation system. In: 4th International Symposium on Mechatronics and its Applications (ISMA07), 26th-29th March 2007, Sharjah, U.A.E. (Unpublished)

Sattar, M.A. and Saidur, R. and Masjuki, H.H. and Mohiuddin, A. K. M. (2007) Energy and thermodynamic performance of refrigerator using pure hydrocarbon and mixture of hydrocarbons as refrigerants. In: International Conference on Mechanical Engineering 2007 (ICME 2007), 29-31 December, 2007, Dhaka, Bangladesh.