Browse by Email

Ahmed, Shugata and Sulaeman, Erwin and Ismail, Ahmad Faris and Hasan, Muhammad Hasibul and Hanouf, Zahir (2022) Effects of operating conditions on evaporation rate and wall shear stress development in a micro-gap heat sink with internal micro-fins. CFD Letters, 14 (2). pp. 1-9. ISSN 2811-3969

Ahmed, Shugata and Sulaeman, Erwin and Ismail, Ahmad Faris and Muhammad, Hasibul Hasan (2018) Two-phase fin-induced turbulent cooling for electronic devices using heat pump associated micro-gap Heat Sink. International Journal of Engineering & Technology, 7 (3.13). pp. 113-122. ISSN 2227-524X

Ali, Mohammad Yeakub and Jailani, Wan Norsyazila and Abd Rahman, Mohamed and Hassan, Muhammad Hasibul and Banu, Asfana (2017) Effect of minimum quantity lubrication on surface roughness in tool-based micromilling. IIUM Engineering Journal, 18 (1). pp. 147-154. ISSN 1511-788X E-ISSN 2289-7860

Ahmed, Shugata and Hassan, Muhammad Hasibul and Ismail, Ahmad Faris and Sulaeman, Erwin (2016) Effect of geometrical parameters on boiling heat transfer and pressure drop in micro finned micro gap. ARPN Journal of Engineering and Applied Sciences, 11 (1). 297 -302. ISSN 1819-6608

Ahmed, Shugata and Ismail, Ahmad Faris and Sulaeman, Erwin and Hassan, Muhammad Hasibul (2016) Study on turbulent characteristics of flow boiling in a micro gap under the influence of surface roughness and micro fins. ARPN Journal of Engineering and Applied Sciences, 11 (1). pp. 410-414. ISSN 1819-6608

Ahmed, Shugata and Ismail, Ahmad Faris and Sulaeman, Erwin and Muhammad, Hasibul Hasan (2016) A critical assessment on evaporative cooling performance of micro finned micro gap for high heat flux applications. ARPN Journal of Engineering and Applied Sciences, 11 (1). pp. 331-336. ISSN 1819-6608

Hassan, Muhammad Hasibul and Mollik, Md Sazib (2016) Crystallization kinetics and thermal behaviors of multi-walled carbon nanotube dispersed jute reinforced composite. ARPN Journal of Engineering and Applied Sciences, 11 (6). pp. 4137-4142. ISSN 1819-6608

Ahmed, Shugata and Ismail, Ahmad Faris and Sulaeman, Erwin and Hasan, Muhammad Hasibul (2016) A comparative analysis of flow boiling in micro-gaps with internal micro-fins of rectangular and triangular profiles. International Journal of Applied Engineering Research, 11 (4). pp. 2364-2372. ISSN 0973-4562

Ahmed, Shugata and Hasan, Muhammad Hasibul and Ismail, Ahmad Faris and Sulaeman, Erwin (2015) Effect of geometrical parameters on boiling heat transfer and pressure drop in micro finned micro gap. In: International Postgraduate Conference on Engineering Research (IPCER) 2015 , 27 - 28 Oct 2015, Gombak. (Unpublished)

Ahmed, Shugata and Ismail, Ahmad Faris and Sulaeman, Erwin and Hasan, Muhammad Hasibul (2015) Study on turbulent characteristics of flow boiling in a micro gap under the influence of surface roughness and micro fins. In: International Postgraduate Conference on Engineering Research (IPCER) 2015 , 27th-28th Oct. 2015, International Islamic University Malaysia (IIUM), Gombak, Kuala Lumpur.

Rashid, Muhammad Mahbubur and Firdaus, Md Meftahul and Hassan, Muhammad Hasibul and Rahman, Mohammed Ataur (2015) ANSYS finite element design of an energy saving magneto-rheological damper with improved dispersion stability. Journal of Mechanical Science and Technology, 29 (7). pp. 2793-2802. ISSN 1738-494X E-ISSN 1976-3824

Md. Sazib Mollik, Sazib and Hasan, Muhammad Hasibul and IRUM Tariq, Irum (2015) Structural applications and emerging trends of nano- and biocomposites: a review. Advanced Materials Research, 1115. pp. 345-348. ISSN 1662-8985

Muhammad Hasibul Hasan, Hasan and Md. Sazib Mollik, Sazib and Muataz Hazza Faizi, Muataz (2015) Prediction of crack growth propagation of a super alloy through ANN modeling. Advanced Materials Research, 1115. pp. 217-220. ISSN 1662-8985

Al Hazza, Muataz Hazza Faizi and Adesta, Erry Yulian Triblas and Hassan, Muhammad Hasibul and Shaffiar, Norhashimah (2015) Energy cost optimization in high speed hard turning using simulated annealing algorithm. Advanced Materials Research, 1115. pp. 104-108. ISSN 1022-6680

Ferdaus, Mohammad Meftahul and Rashid, Muhammad Mahbubur and Muhammad, Hasibul hasan and Shanta, Mst. Nafisa Tamanna (2015) Experimental investigation on Magnetorheological Damper’s characterization. Advanced Materials Research, 1115. pp. 476-479. ISSN 1022-6680

Maleque, M. H. A. Musa and Maleque, Md. Abdul and Ali, Mohammad Yeakub and Hasan, Muhammad Hasibul (2015) Fracture behavior issues in HSLA pipeline steels - a review. Advanced Materials Research, 1115. pp. 207-2012. ISSN 1022-6680

Muhammad Hasibul , Hasan and Md. Sazib Mollik, Sazib (2015) Mechanical performance of montmorillonite dispersed jute reinforced composite. In: Mechanical Performance of Montmorillonite Dispersed Jute Reinforced Composite, Singapor .

Al Hazza, Muataz Hazza Faizi and Mohamed, Konneh and Iqbal, Mohammad and Taha, Assem Hatem and Muhammad, Hasibul Hasan (2015) Using the desirability function as an effective tool in target costing model. Advanced Materials Research, 1115. pp. 126-129. ISSN 1022-6680

Ahmed, Shugata and Ismail, Ahmad Faris and Sulaeman, Erwin and Hasan, Muhammad Hasibul (2015) A critical assessment on evaporative cooling performance of micro finned micro gap for high heat flux applications. In: International Postgraduate Conference on Engineering Research (IPCER) 2015 , 27th-28th Oct. 2015, Gombak Campus, IIUM. (Unpublished)

Al Hazza, Muataz Hazza Faizi and Hassan, Muhammad Hasibul (2014) ANN modeling of nickel base super alloys for time dependent deformation. Journal of Automation and Control Engineering , 2 (4). pp. 353-356. ISSN 2301-3702

Al Hazza, Muataz Hazza Faizi and Adesta, Erry Yulian Triblas and Hassan, Muhammad Hasibul and Shaffiar, Norhashimah (2014) Surface roughness modeling in high speed hard turning using regression analysis. International Review of Mechanical Engineering, 8 (2). pp. 431-436. ISSN 1970-8734

Hassan, Muhammad Hasibul and Al Hazza, Muataz Hazza Faizi (2014) Tensile parameters evaluation of two solid solution super alloys by ANN modeling. International Review of Mechanical Engineering, 8 (2). pp. 338-343. ISSN 1970-8734

Ferdaus, Mohammad Meftahul and Rashid, Muhammad Mahbubur and Hassan, Muhammad Hasibul and Rahman, Mohammed Ataur (2014) Optimal design of magneto-rheological damper comparing different configurations by finite element analysis. Journal of Mechanical Science and Technology, 28 (9). pp. 3667-3677. ISSN 1976-3824 (O), 1738-494X (P)

Syed, Zubair Imam and Liew, Mohdshahir and Hasan, Muhammad Hasibul and Venkatesan, Srikanth (2014) Single-degree-of-freedom based pressure-impulse diagrams for blast damage assessment. Applied Mechanics and Materials, 567. pp. 499-504. ISSN 1660-9336

Al Hazza, Muataz Hazza Faizi and Mohammed , Baba Ndaliman and muhammad, Hasibul hasan and Mohammad , Yeakub Ali and Khan, Ahsan Ali (2013) Modeling the electrical parameters in EDM process of Ti6Al4V alloy using Neural Network method. International Review of Mechanical Engineering, 7 (7). pp. 1464-1470. ISSN 1970-8734

Al Hazza, Muataz Hazza Faizi and Adesta, Erry Yulian Triblas and Hassan, Muhammad Hasibul (2013) Tool life modeling in high speed turning of AISI 4340 hardened steel with mixed ceramic tools by using face central cubic design. International Review on Modelling and Simulations, 6 (4). pp. 1334-1338. ISSN 1974-983X (O), 1974-9821 (P)