Browse by Email

Al Amin, Md and Abdul-Rani, Ahmad Majdi and Danish, Mohd and Rubaiee, Saeed and Mahfouz, Abdullah and Thompson, Harvey M. and Ali, Sadaqat and Unune, Deepak Rajendra and Sulaiman, Mohd Hafis (2021) Investigation of coatings, corrosion and wear characteristics of machined biomaterials through hydroxyapatite mixed-EDM process: a review. Materials, 14 (13).

Nordin, Norhuda Hidayah and Sulaiman, Mohd Hafis and Leong, Zhaoyuan (2021) Nano-indentation and indentation size effect on different phases in Lamellar structure high entropy alloy. In: Green Tribology. CRC PRESS, pp. 177-186. ISBN 978-0-367-68860-8

Sulaiman, Mohd Hafis and raof, Natasha A. and Dahnel, Aishah Najiah (2021) The investigation of PVD coating, cryogenic lubrication and ultrasonic vibration on tool wear and surface integrity in manufacturing processes. Jurnal Tribologi, 28. pp. 105-116. E-ISSN 2289-7232

Sulaiman, Mohd Hafis and A. Raof, Natasha and Dahnel, Aishah Najiah (2020) Tribology of Composite Materials and Coatings in Manufacturing. In: Tribological Applications of Composite Materials. Springer, Singapore, pp. 283-308.

Tuan Rohadi, Tuan Nurain and Mohd Jamir, Mohd Ridzuan and Abdul Majid, Mohd Shukry and Sulaiman, Mohd Hafis (2020) Isolation and characterisation of cellulose from cortex, pith and whole of the Pennisetum purpureum: Effect of sodium hydroxide concentration. Journal of Materials Research and Technology, 9 (6 (Nov-Dec)). pp. 15057-15071. ISSN 238-7854/

Sulaiman, Mohd Hafis (2020) Evaluation of lubricant performance in sheet metal forming. In: Webinar: Tribology as a basis in Condition Base Monitoring, 27th August 2020, Kuala Lumpur. (Unpublished)

Azzmer, S. and Jaafar, H. and Tajul, Liyana and Sulaiman, Mohd Hafis and Zainal Abidin, Zailani (2020) Crack detection on sheared-edge of ultra-high strength steel sheet by using acid immersion. In: 2nd Joint Conference on Green Engineering Technology & Applied Computing 2020, 4th - 5th February 2020, Bangkok, Thailand.

Sukindar, Nor Aiman and Awang Dahan, Azib Azhari and Abd Halim, Nor Farah Huda and Kamaruddin, Shafie and Sulaiman, Mohd Hafis (2020) The Effect of Printing Parameters on Scaffold Structure Using Low-cost 3D Printer. TEST Engineering & Management, 82. 8255 -8263. ISSN 0193-4120

Sulaiman, Mohd Hafis and A. Raof, Natasha and Dahnel, Aishah Najiah (2020) Environmental-friendly tribological and lubrication in manufacturing processes. In: 4th International Conference on Sustainable Materials (e-ICoSM) 2020), 3rd September 2020, Pahang. (Unpublished)

Sukindar, Nor Aiman and Md Azhar, Muhammad Afif and Abd Halim, Nor Farah Huda and Kamaruddin, Shafie and Sulaiman, Mohd Hafis (2020) The effects of printing parameters on the surface quality of metal composite by using fused deposition modeling. Solid State Technology, 63 (5). pp. 866-874. E-ISSN 0038-111X

Sulaiman, Mohd Hafis and Ramli, Nur Farahana and Bienk, K and Nielsen, Chris Valentin and Bay, Niels (2019) Effects of DLC/TiAlN-coated die on friction and wear in sheet-metal forming under dry and oil-lubricated conditions: Experimental and numerical studies. Wear, 438-439. pp. 1-10. ISSN 0043-1648

Sulaiman, Mohd Hafis and R.N., Farahana and L, Tajul and H, Jaafar (2019) The wettability characteristics of DLC coating for tribological engineering applications. In: 6th International Conference on Applications and Design in Mechanical Engineering 2019, ICADME 2019, 26-27 August 2019, Penang.

Sulaiman, Mohd Hafis and R.N, Farahana and Mohd Jamir, Mohd Ridzuan and Mohammad Jaafar, Muhammad Hasnulhadi (2019) Manufacturing strategies and tribology of tailored tool surface topographies for enhanced lubrication in metal forming. In: 3rd Mytribos Symposium 2019 Universiti Malaysia Perlis (UniMAP), 29 April 2019, Arau, Perlis.

Sulaiman, Mohd Hafis and Christiansen, Peter Leth and Bay, Niels (2019) An experimental compression test of lubricants with direct measurement of lubricant pressure build-up. Jurnal Tribologi, 20. pp. 51-64. ISSN 2289-7232

Sulaiman, Mohd Hafis (2018) Subject Matter Experts Challenge for real-world industrial solutions: Warm forging and stamping to make cost-effective motorcycle sprockets. Other. UNSPECIFIED.

Sulaiman, Mohd Hafis and Christiansen, P. and Bay, N. (2018) Measurement of compressibility by means of pressure-bulk modulus relationship for low-to-high viscosity oils. In: Asia International Conference on Tribology 2018, Kuching, Sarawak.

Sulaiman, Mohd Hafis and Christiansen, P and Bay, N (2018) A study of anti-seizure tool coatings of ironing of stainless steel. Jurnal Tribologi, 17. pp. 1-14. E-ISSN 2289-7232

Üstünyagiz, Esmeray and Sulaiman, Mohd Hafis and Christiansen, Peter Leth and Nielsen, Chris Valentin and Bay, Niels (2018) A study on DLC tool coating for deep drawing and ironing of stainless steel. Key Engineering Materials, 767. pp. 181-188. ISSN 1013-9826

Mohd Jamir, Mohd Ridzuan and Abdul Majid, Mohd Shukry and Sulaiman, Mohd Hafis and Khasri, Azduwin (2017) The effects of alkali treatment on the mechanical and morphological properties of Pennisetum purpureum/glass-reinforced epoxy hybrid composites. Plastics, Rubber and Composites, 46 (10). pp. 421-430. ISSN 1465-8011 E-ISSN 1743-2898

Moghadam, Marcel and Sulaiman, Mohd Hafis and Christiansen, Peter and Bay, Niels (2017) Acoustic emission monitoring of the bending under tension test. In: International Conference on the Technology of Plasticity, ICTP 2017, 17th-22nd September 2017, Cambridge, United Kingdom.

Sulaiman, Mohd Hafis and Christiansen, Peter Leth and Bay, Niels (2017) Influence of tool texture on friction and lubrication in strip reduction. In: International Conference on the Technology of Plasticity, ICTP 2017, 17th-21st September 2017, Cambridge, United Kingdom.

Sulaiman, Mohd Hafis and Christiansen, Peter Leth and Bay, Niels (2017) A study of DLC coatings for ironing of stainless steel. In: 36th IDDRG Conference - Materials Modelling and Testing for Sheet Metal Forming, 2nd-6th July 2017, Munich, Germany.

Sulaiman, Mohd Hafis and Christiansen, Peter and Bay, Niels (2017) The Influence of tool texture on friction and lubrication in strip reduction testing. Lubricants, 5 (3). pp. 1-11. ISSN 2075-4442

Sulaiman, Mohd Hafis and Ridzuan, M. J.M. and Farahana, R. N. and Ayob, Amran and Syahrullail, S. (2013) Paraffinic mineral oil lubrication for cold forward extrusion: effect of lubricant quantity and friction. Tribology International, 60. pp. 111-115. ISSN 0301-679X