Items where Author is "Wan Yusoff, Wan Ahmad Yusmawiza"

Article

Musa, Mukhtarudin and Wan Yusoff, Wan Ahmad Yusmawiza and Purwanto, Hadi and Abdul Hamid, Abd. Malek and Othman, Raihan and Ani, Mohd Hanafi (2017) Microstructural and compositional study of metal laminated composite in Malay Keris. Advanced Science Letters, 23 (7). pp. 6237-6241. ISSN 1936-6612 E-ISSN 1936-7317

Wan Yusoff, Wan Ahmad Yusmawiza (2017) The application of scanning electron microscope and melt flow index for orange peel in laser sintering process. Indonesian Journal of Electrical Engineering and Computer Science, 6 (3). pp. 615-622. ISSN 2502-4752

Ani, Mohd Hanafi and Ramli, Nor Shahirah and Wan Yusoff, Wan Ahmad Yusmawiza and Mustafah, Yasir Mohd. and Othman, Raihan (2015) Formation of hydrophobic surface using two stages electrodeposition method. Advanced Materials Research, 1115. pp. 226-229. ISSN 1022-6680

Wan Yusoff, Wan Ahmad Yusmawiza and Zakariah, Nur Zawanah and Abdullah, Nurshafika and Ani, Mohd Hanafi and Mohd. Mustafah, Yasir (2014) Fabrication of hip and pelvis part for designing acetabular implant by using Fused Deposition Modeling (FDM) machine. Advanced Materials Research, 875-87. pp. 1235-1238. ISSN 1022-6680

Wan Yusoff, Wan Ahmad Yusmawiza and Pham, Duc Trung and Dotchev, Krassimir (2014) Investigation of the thermal properties of different grades Polyamide 12 (PA12) in improving laser sintering process (SLS). Advanced Materials Research, 548/49. pp. 294-296. ISSN 1022-6680

Mohd, Alias and Hindle, C. and Wan Yusoff, Wan Ahmad Yusmawiza (2011) Mould filling and pressure distribution for polymer resins. Advanced Materials Research, 264/65. pp. 771-776. ISSN 1022-6680

Book

Syed Abdul Bahari, Syed Najib and Wan Yusoff, Wan Ahmad Yusmawiza (2011) Quality improvement of Three-way Catalytic Converter (TWC) system: application of failure modes and effects analysis (FMEA) methodology. LAP Lambert Academic Publishing, Germany. ISBN 9783845443287

Adesta, Erry Yulian Triblas and Shafie, Amir Akramin and Wan Yusoff, Wan Ahmad Yusmawiza, eds. (2011) High speed cutting: an approach towards improved machining performance. IIUM Press, Kuala Lumpur. ISBN 978-967-418-023-2

Book Chapter

Syed Abdullah, Syed Idros and Mahamad Puzi, Mohamad Syatbi and Wan Yusoff, Wan Ahmad Yusmawiza (2011) Design and fabrication of industrial welding robotic arm. In: Design for manufacture: towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 58-63. ISBN 9789674181598

Wan Yusoff, Wan Ahmad Yusmawiza and Saloh, Azmil (2011) Implementation of FMECA on Computer Integrated Manufacturing (CIM). In: Design for manufacture : Towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 129-135. ISBN 9789674181598

Wan Yusoff, Wan Ahmad Yusmawiza and Roberts, Paul (2011) Implementation of FMECA on Fixed Assembly Cell (FAC). In: Design for manufacture: towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 121-128. ISBN 9789674181598

Wan Yusoff, Wan Ahmad Yusmawiza and Md Noraini, Muhammad Fauzan and Ismail, Mohd Norazrul (2011) Performance measurement of SMEs manufacturing sector in Malaysia. In: Design for manufacture: towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 98-103. ISBN 9789674181598

Wan Yusoff, Wan Ahmad Yusmawiza and Kamarudin , Muhammad Ridhuan and Mohd Salimi , Noor Iliana (2011) Reverse engineering for rapid prototyping of automotive components. In: Design for manufacture: towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 50-56. ISBN 9789674181598

Wan Yusoff, Wan Ahmad Yusmawiza and Mohd, Aziatul Ashikin and Abdul Rahim, Siti Maznah (2011) The introduction of fit manufacturing as a performance measuring approach towards sustainability of selected manufacturing companies in Malaysia. In: Design for manufacture: towards improved manufacturabilit. IIUM Press, Kuala Lumpur, pp. 105-112. ISBN 9789674181598

Wan Yusoff, Wan Ahmad Yusmawiza and Hayyun, Muhammad Fakhrani and Abdullah, Mohd Fairus (2011) The study of the implementation of OHSAS: 18001 at Kulliyyah of Engineering. In: Design for manufacture: towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 113-120. ISBN 9789674181598

Mohamad Ali, Hasanudin Hafis and Md. Shukri, Md. Amir Hamzah and Wan Yusoff, Wan Ahmad Yusmawiza (2011) A surgical training model manufacture using fused deposition modeling. In: Design for manufacture: towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 44-49. ISBN 9789674181598

Proceeding Paper

Wan Yusoff, Wan Ahmad Yusmawiza (2018) Product development and cost analysis of fabricating the prototype of roller clamp in intravenous (I.V) tubing medical devices using fused deposition modeling (FDM) technology. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8 - 9 August 2017, International Islamic University Malaysia (IIUM), Gombak Campus, Kuala Lumpur.

Wan Yusoff, Wan Ahmad Yusmawiza and Ani, Mohd Hanafi and Pham, DT and Dotchev, K. (2015) Influence of molecular weight average, degree of crystallinity, and viscosity of different polyamide PA12 powder grades on the microstructures of laser sintered part. In: 2015 3rd Asia Conference on Mechanical and Materials Engineering (ACMME 2015), 23rd-24th July 2015, Chengdu, Sichuan, China.

Wan Yusoff, Wan Ahmad Yusmawiza and Azrai, Muhammad and Mohamad, Ahlam Hadi (2014) Improving the design of peripheral IV therapy by employing product development approach and rapid prototyping technology. In: 3rd International Conference on Manufacturing Engineering and Process, ICMEP 2014, 10 -11 April 2014, Seoul; South Korea.

Wan Yusoff, Wan Ahmad Yusmawiza and Mohamad Ali, Hasanudin Hafis and Md. Shukri, Md. Amir Hamzah (2012) Fabrication of surgical cranioplasty biomodel using fused deposition modeling. In: 2012 International Conference on Innovation Management and Technology Research (ICIMTR), 21 - 22 May 2012, Malacca, Malaysia.

Wan Yusoff, Wan Ahmad Yusmawiza and Mohamad Ali, Hasanudin Hafis and Md. Shukri, Md. Amir Hamzah (2011) Application of rapid prototyping in medical engineering. In: Asia Pacific Symposium on Advancements in Ergonomics and Safety (ERGOSYM 2011), 5-6 December 2011, Kangar, Perlis, Malaysia. (Unpublished)

Wan Yusoff, Wan Ahmad Yusmawiza and A. Nasir, Safwa and Ahmad, Wan Mohamad Hakimi (2011) Investigation of the effect of “Orange Peel” surface texture on the laser sintered part. In: IEEE Symposium on Business, Engineering and Industrial Applications (ISBEIA 2011), 25th - 28th September 2011, Langkawi, Malaysia.

A. W. , Fatimatuzahraa and Baharuddin, Farahaina and Wan Yusoff, Wan Ahmad Yusmawiza (2011) The effect of employing different raster orientations on the mechanical properties and microstructure of Fused Deposition Modeling parts. In: 2011 IEEE Symposium on Business, Engineering and Industrial Applications (ISBEIA), 25-28 September 2011, Langkawi, Malaysia. (Unpublished)

Wan Yusoff, Wan Ahmad Yusmawiza and Pham, Duc Trung and Dotchev, Krassimir (2011) Improvement of powder management and recycling in laser sintering. In: International Conference on Manufacturing and Industrial Engineering, (ICMIE), 24-26 June 2011, Paris, France.

Pham, Duc Trung and Shwe, S. and Wan Yusoff, Wan Ahmad Yusmawiza and Purwanto, Hadi and -, Farizahani (2011) Thermal properties of polymer materials in laser sintering process. In: Proceedings of the Institutional of Mechanical Engineers, Part B: Journal of Mechanical Engineering Science, 2011, united kingdom. (Unpublished)

Wan Yusoff, Wan Ahmad Yusmawiza and Adesta, Erry Yulian Triblas and Dahnel, Aishah Najiah and Abd Halim, Nor Farah Huda (2011) The application of Quality Function Deployment (QFD) and Rapid Prototyping (RP) technology in improving the design of anti sleep driving alarm. In: Proceedings of the 2011 International Conference on Industrial Engineering and Operations Management, 22 - 24 Jan 2011, Kuala Lumpur, Malaysia.

Wan Yusoff, Wan Ahmad Yusmawiza and Fakhrani, Muhammad and Fairus, Mohd and Adesta, Erry Yulian Triblas (2011) The study of the implementation of OHSAS : 18001 at Kulliyyah of Engineering (KOE). In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE' 11), 17-19 May, 2011, Kuala Lumpur, Malaysia. (Unpublished)

Wan Yusoff, Wan Ahmad Yusmawiza and Badri, Zu Hazmin and Masri, Zainal and Hussin, Zahir (2009) Benchmarking the rapid prototyping machines (RPM) for education purpose using quality function deployment (QFD). In: International Conference on Advances in Materials & Processing Technology (AMPT 2009), 26-29 Oct., 2009, Kuala Lumpur.

Wan Yusoff, Wan Ahmad Yusmawiza and Pham, D. T. and Dotchev, K. (2009) Effect of employing different grades of recycled polyamide 12 on the surface texture of laser sintered (LS) parts. In: International Conference on Advances in Materials & Processing Technology (AMPT 2009), 26-29 Oct., 2009, Kuala Lumpur.

Wan Yusoff, Wan Ahmad Yusmawiza and Syazmi, Khairil and Mohd Naeem, Saripan (2009) Investigation on mechanical properties of ABS using rapid rpototyping technology and injection molding process. In: International Conference on Advances in Materials & Processing Technology (AMPT 2009), 26-29 Oct., 2009, Kuala Lumpur.

Wan Yusoff, Wan Ahmad Yusmawiza and Sa’edun, Mohamad and Afiq, Faidhi (2009) The application of rapid prototyping technology and FMEA quality tool in the development of automotive component. In: International Conference on Advances in Materials & Processing Technology (AMPT 2009), 26-29 Oct., 2009, Kuala Lumpur.

Monograph

Maleque, Md. Abdul and Wan Yusoff, Wan Ahmad Yusmawiza and Samat, Noorasikin and Ali, Mohammad Yeakub and Rahman, Md Mustafizur and Adetayo A., Adebisi (2017) Prototype development of light weight aluminium matrix composite automotive brake rotor. Project Report. UNSPECIFIED. (Unpublished)

Wan Yusoff, Wan Ahmad Yusmawiza (2013) A surgical training model manufacturer using fused deposition (FDM) modeling. Research Report. s.n, Kuala Lumpur. (Unpublished)