Items where Author is "Syed Mohamed Ali, Jaffar "
 | Up a level |
Article
Shaikh, Abdul Aabid and Baig, Muneer and Hrairi, Meftah and Syed Mohamed Ali, Jaffar (2024) Effect of fiber orientation-based composite lamina on mitigation of stress intensity factor for a repaired plate: a finite element study. Frattura ed Integrita Strutturale, 18 (68). pp. 209-221. E-ISSN 1971-8993
Shabbir Ahmed, Omar and Aabid, Abdul and Syed Mohamed Ali, Jaffar and Hrairi, Meftah and Mohd Yatim, Norfazrina Hayati (2023) Buckling analysis of a thin-walled C-section channel under mechanical and thermal load. Journal of Advanced Research in Applied Mechanics, 109 (1). pp. 1-16. E-ISSN 2289-7895
Shabbir Ahmed, Omar and Aabid, Abdul and Syed Mohamed Ali, Jaffar and Hrairi, Meftah and Mohd Yatim, Norfazrina Hayati (2023) Progresses and challenges of composite laminates in thin-walled structures: a systematic review. ACS Omega, 8 (34). pp. 30824-30837. E-ISSN 2470-1343
Syed Abd Rahman AlQudsy, Sharifah Nadhirah and Syed Mohamed Ali, Jaffar and Shaik Dawood, Mohd. Sultan Ibrahim and Rosli, Adib Hamdani (2023) Influence of composite skin on the energy absorption characteristics of an aircraft fuselage. International Journal of Engineering Materials and Manufacture, 8 (1). pp. 13-20. E-ISSN 0128-1852
Aabid, Abdul and Hrairi, Meftah and Syed Mohamed Ali, Jaffar and Ibrahim, Yasser E. (2023) Review of piezoelectric actuator applications in damaged structures: challenges and opportunities. ACS Omega, 8 (3). pp. 2844-2860. ISSN 2470-1343
Ridwan, R and Khan, Sher Afghan and Syed Mohamed Ali, Jaffar and Sapardi, Mohd Azan Mohammed and Aabid, Abdul (2023) Numerical analysis of cavity-based control of base pressure variations at supersonic Mach numbers. Fluid Dynamics & Materials Processing, 23 (3). pp. 1-23. ISSN 1555-256X E-ISSN 1555-2578
Kamarudin, Mohamad Norfaieqwan and Syed Mohamed Ali, Jaffar and Aabid, Abdul and Ibrahim, Yasser E. (2022) Buckling analysis of a thin-walled structure using finite element method and design of experiments. Aerospace, 9 (10). pp. 1-31. E-ISSN 2226-4310
Revichandran, Rajeanderan and Syed Mohamed Ali, Jaffar and Idres, Moumen and Mohiuddin, A.K.M (2021) Energy efficiency and optimization of buildings for sustainable development in Malaysia. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences. ISSN 2289-7879 (In Press)
Syed Mohamed Ali, Jaffar and Amran, Mohd Farid and Mohamad, Nurul Aziz (2021) Experimental study on the effect of boundary layer control on the aerodynamics characteristics of NACA 0021 Aerofoil. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences. ISSN 2811 - 3950 (In Press)
Anjum, Asraar and Syed Mohamed Ali, Jaffar and Mohamed Zayan, Jalal and Aabid, Abdul (2020) Statistical Analysis of Adhesive Bond Parameters in a Single Lap Joint System. Journal of Modern Mechanical Engineering and Technology, 7. pp. 53-58. E-ISSN 2409-9848
Abdul, Aabid and Hrairi, Meftah and Syed Mohamed Ali, Jaffar (2020) Optimization of composite patch repair for center-cracked rectangular plate using design of experiments method. Materials Today: Proceedings, 27 (2). pp. 1713-1719. ISSN 2214-7853
Abd Halim, Abdul Kareem and Syed Mohamed Ali, Jaffar and Sulaeman, Erwin (2020) The effect of fuel weight distribution on the aeroelastic instability of swept wings. International Journal of Vehicle Structures & Systems, xx (xx). p. 1. ISSN 0975-3060 E-ISSN 0975-3540 (In Press)
Aabid, Abdul and Hrairi, Meftah and Syed Mohamed Ali, Jaffar and Abuzaid, Ahmed (2019) Effect of bonded composite patch on the stress intensity factor for a center cracked plate. IIUM Engineering Journal, 20 (2). pp. 211-221. ISSN 1511-788X E-ISSN 2289-7860
Ahmed, Zaheer and Syed Mohamed Ali, Jaffar and Rafeeq, Mohammed and Hrairi, Meftah (2019) Application of machine learning with impedance based techniques for structural health monitoring of civil infrastructure. International Journal of Innovative Technology and Exploring Engineering (IJITEE), 8 (6S4). pp. 1139-1148. ISSN 2278-3075
Syed Mohamed Ali, Jaffar and Mahmood, Munir Mohamed and Shaik Dawood, Mohd. Sultan Ibrahim (2019) Shape control of composite plates with piezoelectric actuators. International Journal of Recent Technology and Engineering (IJRTE), 7 (6S). pp. 219-223. ISSN 2277-3878
Adedi, Muhammad Rahman and Syed Mohamed Ali, Jaffar and Hrairi, Meftah (2019) A new higher order theory for analysis of orthotropic cylindrical shell under electromechanical load. International Journal of Engineering and Advanced Technology (IJEAT), 8 (3S). pp. 749-753. ISSN 2249 – 8958
Syed Mohamed Ali, Jaffar and M. Saleh, Mubin (2019) Experimental and numerical study on the aerodynamics and stability characteristics of a canard aircraft. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 53 (2). pp. 165-174. ISSN 2289-7879
Syed Mohamed Ali, Jaffar and Omar, Ashraf Ali and Nasikin, Mohd Faiz Diuzzaman (2019) Numerical and experimental study on the effect of cab- extender on the flow characteristics of a tractor-trailer. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 53 (1). pp. 61-68. ISSN 2289-7879
Mohammed Riyadh, Miah and Syed Mohamed Ali, Jaffar (2018) A matlab based educational software for the study on the effect of cut-out in aircraft wings. International Journal of Engineering & Technology, 7 (4.25). pp. 114-118. ISSN 2227-524X
Thong, Meow Keong and See-Toh, Yiling and Hassan, Jamiyah and Syed Mohamed Ali, Jaffar (2018) Medical genetics in developing countries in the Asia-Pacific region: challenges and opportunities. Genetics in Medicine, 20 (10). pp. 1114-1121. ISSN 1098-3600 E-ISSN 1530-0366
Aabid, Abdul and Hrairi, Meftah and Syed Mohamed Ali, Jaffar and Abuzaid, Ahmed (2018) Numerical analysis of cracks emanating from hole in plate repaired by composite patch. International Journal of Mechanical and Production Engineering Research and Development, Special issue. pp. 238-243. ISSN 2249-6890 E-ISSN 2249-8001
Syed Mohamed Ali, Jaffar and Omar, Ashraf Al and Nasikin, Mohd Faiz Diuzzaman (2018) Numerical and experimental study on the effect of cab-extender on the flow characteristics of a tractor-trailer. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, xx (xx). pp. 1-8. ISSN 2289-7879 (In Press)
Syed Mohamed Ali, Jaffar and Hrairi, Meftah and Masturah, Mohamad (2018) Stress analysis of thin-walled laminated composite beams under shear and torsion. International Journal of Engineering Materials and Manufacture, 3 (1). pp. 9-17. E-ISSN 0128-1852
Syed Mohamed Ali, Jaffar and M.Y., Hasfareeza (2017) Crash analysis of an aircraft fuselage under belly landing. International Journal of Recent Research Aspects, 4 (4). pp. 73-76. ISSN 2349-7688
UlHaque, Anwar and Asrar, Waqar and Omar, Ashraf Ali and Sulaeman, Erwin and Syed Mohamed Ali, Jaffar (2017) Hybrid buoyant aircraft: future STOL aircraft for interconnectivity of the Malaysian islands. Journal of Aviation Technology and Engineering, 6 (2). pp. 80-88. ISSN 2159-6670
UlHaque, Anwar and Asrar, Waqar and Syed Mohamed Ali, Jaffar and Sulaeman, Erwin (2016) Establishing the analytical relationships for mass and volumetric mass fractions for hybrid buoyant aircraft. ARPN Journal of Engineering and Applied Sciences, 11 (1). pp. 286-291. ISSN 1819-6608
Syed Mohamed Ali, Jaffar and Alsubari, Saleh and Aminanda, Yulfian (2016) Hygrothermoelastic analysis of orthotropic cylindrical shells. Latin American Journal of Solids and Structures, 13 (3). pp. 573-589. ISSN 1679-7825 (O), 1679-7817 (P) E-ISSN 1679-7825
UlHaque, Anwar and Asrar, Waqar and Omar, Ashraf Ali and Sulaeman, Erwin and Syed Mohamed Ali, Jaffar (2015) Aerostatic and aerodynamic modules of a hybrid buoyant aircraft: an analytical approach. IIUM Engineering Journal, 16 (1). pp. 9-17. ISSN 2289-7860 (O), 1511-788X (P) E-ISSN 2289-7860
UlHaque, Anwar and Asrar, Waqar and Omar, Ashraf Ali and Sulaeman, Erwin and Syed Mohamed Ali, Jaffar (2015) Half model testing for canard of a hybrid buoyant aircraft. International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, 9 (10). pp. 1544-1547.
Syed Mohamed Ali, Jaffar and Alsubri, Saleh and Aminanda, Yulfian (2015) A higher order theory for bending of cross ply laminated cylindrical shell under hygrothermal loads. Advanced Materials Research, 1115. pp. 509-512. ISSN 1022-6680
Omar, Nurihan and Aminanda, Yulfian and Syed Mohamed Ali, Jaffar (2014) Experimental study of impact on carbon-fiber-epoxy composite wing leading edge structure. Applied Mechanics and Materials, 493. pp. 672-677. ISSN 1660-9336
Syed Mohamed Ali, Jaffar and Syed Muhammad, Kashif and Shaik Dawood, Mohd. Sultan Ibrahim and Omar, Ashraf Ali (2014) Study on the effect of window opening on the drag characteristics of a car. International Journal of Vehicle Systems Modelling and Testing, 9 (3-4). pp. 311-320. ISSN 1745-6444 (O), 1745-6436 (P)
Syed Mohamed Ali, Jaffar and ., Hasna Nur Fadhila and Aziz, Nor Azhanadia (2013) Educational software for stress analysis of idealized thin walled open sections. Applied Mechanics and Materials, 315. pp. 339-343. ISSN 1660-9336 (O), 978-303785262-0 (P)
Syed Mohamed Ali, Jaffar and Abdullah, Kassim Abdulrahman and Aminanda, Yulfian (2013) Effect of cross sectional shape on the energy absorbing characteristics of a tube under quasi-static loading. Applied Mechanics and Materials, 315. pp. 334-338. ISSN 1660-9336
Abdullah, Kassim Abdulrahman and Syed Mohamed Ali, Jaffar and Aminanda, Yulfian (2012) Experimental and numerical simulation of hollow structure under compression loading. Advanced Materials Research, 576. pp. 651-654. ISSN 1022-6680
Omar, Nurihan and Syed Mohamad, Sharifah Najwa and Aminanda, Yulfian and Syed Mohamed Ali, Jaffar and Kashif, Syed Muhammad (2012) Experimental study on jute-fiber-epoxy composite plate subjected to impact loading. Advanced Materials Research, 576. pp. 232-235. ISSN 1022-6680
Book Chapter
Syed Mohamed Ali, Jaffar and Jamaludin, Nur Faizlin and Roslan, Rosfarisya and Abdul Rahman, Mohammad (2011) Buckling of composite columns. In: Advances in Aircraft Structures. IIUM Press, Kuala Lumpur, pp. 107-116. ISBN 978-967-418-148-2
Syed Mohamed Ali, Jaffar and Wan Abdullah, Wan Najihah and Aminuddin, Alina (2011) Buckling of composite perforated plates. In: Advances in Aircraft Structures. IIUM Press, Kuala Lumpur, pp. 117-124. ISBN 978-967-418-148-2
Syed Mohamed Ali, Jaffar and Wan Abdullah, Wan Najihah and Aminuddin, Alina and Khalid, Saif Ar-Rahman and Mohd Mohtar, Sobrie Shah (2011) Buckling of long column. In: Advances in Aircraft Structures. IIUM Press, Kuala Lumpur, pp. 150-157. ISBN 978-967-418-148-2
Syed Mohamed Ali, Jaffar and Jamaludin, Nur Faizlin and Roslan, Rosfarisya and Abdul Rahman, Mohammad (2011) Buckling of thin walled sections. In: Advances in Aircraft Structures. IIUM Press, Kuala Lumpur, pp. 158-166. ISBN 978-967-418-148-2
Syed Mohamed Ali, Jaffar and Wan Abdullah, Wan Najihah and Aminuddin, Alina and Khalid, Saif Ar-Rahman and Mohd Mohtar, Sobrie Shah (2011) Effect of boundary conditions on the buckling behavior of perforated plates. In: Advances in Aircraft Structures. IIUM Press, Kuala Lumpur, pp. 167-173. ISBN 978-967-418-148-2
Syed Mohamed Ali, Jaffar and Khalid, Saif Ar-Rahman and Mohd Mohtar, Sobrie Shah (2011) Effect of cutout shape on the critical buckling load of a perforated plate. In: Advances in Aircraft Structures. IIUM Press, Kuala Lumpur, pp. 174-181. ISBN 978-967-418-148-2
Syed Mohamed Ali, Jaffar and Shahidan, Zul Hasyimi (2011) Lateral crushing of composite fuselages. In: Advances in Aircraft Structures. IIUM Press, Kuala Lumpur, pp. 37-44. ISBN 978-967-418-148-2
Syed Mohamed Ali, Jaffar and Mokhtar, Mohammad Solehan (2011) Propeller blade stress analysis using CATIA. In: Advances in Aircraft Structures. IIUM Press, Kuala Lumpur, pp. 30-36. ISBN 978-967-418-148-2
Syed Mohamed Ali, Jaffar and Khan, Md. Raisuddin and Hamid, Md.Tarique (2011) Structural analysis of an active beam. In: Advances in aircraft structure. IIUM Press, Kuala Lumpur, pp. 125-130. ISBN 978-967-418-148-2
Proceeding Paper
Syed Mohamed Ali, Jaffar and M.Shaari, Muhammad Hafiz (2023) Numerical study on stability of oblique wing configuration. In: IIUM Engineering Congress, 15-16 August 2023, KOE ,IIUM.
Zainal Abedin, Nur Diana and Syed Mohamed Ali, Jaffar and Aabid, Abdul and Aminanda, Yulfian (2023) Study on the lateral torsional buckling of composite thin-walled beam. In: 8th Brunei International Conference on Engineering and Technology 2021 (BICET 2021), 8th - 10th November 2021, Bandar Seri Begawan, Brunei Darussalam (Virtual).
Rahman, Muhammad and Alsubari, Saleh and Syed Mohamed Ali, Jaffar and Hrairi, Meftah and Shaik Dawood, Mohd. Sultan Ibrahim (2021) Assessment of shell theories for cross-ply and angle-ply laminated cylindrical shells under thermo-mechanical loads. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2021), 22-23 June 2021, Kuala Lumpur, Malaysia. (Unpublished)
Zainal Abedin, Nur Diana and Syed Mohamed Ali, Jaffar and Aabid, Abdul and Aminanda, Yulfian (2021) Study on the lateral torsional buckling of composite thin-walled beam. In: BICET, 8th Brunei International Conference Engineering and Technology, 8-10 Nov 2021, Brunei Darussalam.. (Unpublished)
Abdul Halim, Abdul Karim and Syed Mohamed Ali, Jaffar and Erwin, Sulaeman (2019) Prediction of buckling mode for simply supported stiffened thin plates subject to inplane loading. In: 11th International Conference On Numerical Analysis In Engineering Conference In Numerical Analysis In Engineering (NAE) 2019, 20th-22 August 2019, Bangi, Selangor. (Unpublished)
Syed Mohamed Ali, Jaffar and Nur Fadhila, Hasna and Makame, Burhani and Riyadh, Miah Mohammed (2018) Educational software for stress analysis of idealized closed thin walled sections. In: International Conference on Aviation Technology and Management (ICATEM2018), 12th-14th Sept. 2018, Kuala Lumpur. (Unpublished)
Syed Mohamed Ali, Jaffar and Ali, Mir Owais and Riyadh, Miah Mohammed (2018) Educational software for stress analysis of non-idealized closed thin-walled sections. In: 4th International Conference on Mechanical, Automotive, and Aerospace Engineering 2018 (ICMAAE’18), 19th-20th September 2018, Kuala Lumpur. (Unpublished)
Alsubari, Saleh and Syed Mohamed Ali, Jaffar and Aminanda, Yulfian and Shaik Dawood, Mohd. Sultan Ibrahim (2017) Effect of temperature and moisture dependent material properties on the bending behavior of laminated cylindrical shell under hygrothermal loads. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25-27 July 2016, Kuala Lumpur, Malaysia.
Syed Mohamed Ali, Jaffar and Omar, Ashraf Ali and Ali, Muhammad Atif and Mohd Baseair, Abdul Rahman (2017) Numerical investigation of aerodynamic characteristics of high speed train. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering, ICMAAE 2016, 25th-27th July 2016, Kuala Lumpur, Malaysia.
Labanieh, Mohamad Fateh and Syed Mohamed Ali, Jaffar and Shaik Dawood, Mohd. Sultan Ibrahim (2017) Optimal location of piezoelectric patches for active vibration control. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE '16), 25th-27th July 2016, Kuala Lumpur.
UlHaque, Anwar and Asrar, Waqar and Omar, Ashraf Ali and Sulaeman, Erwin and Syed Mohamed Ali, Jaffar (2015) Establishing the analytical relationships for mass and volumetric mass fractions for hybrid boyant aircraft. In: International Postgraduate Conference on Engineering Research (IPCER) 2015 , 27th-28th Oct. 2015, Gombak Campus, IIUM. (Unpublished)
UlHaque, Anwar and Asrar, Waqar and Omar, Ashraf Ali and Sulaeman, Erwin and Syed Mohamed Ali, Jaffar (2015) Hydrostatic and hydrodynamic characteristics of swimming animals: an inspiration for hybrid buoyant aircraft. In: 4th International Scientific Conference on Applied Sciences and Engineering (4 thISCASE-2015), 3rd-4th Oct. 2015, Langkawi, Malaysia.
Ul Haque, Anwar and Asrar, Waqar and Sulaeman, Erwin and Syed Mohamed Ali, Jaffar and Omar, Ashraf Ali (2015) Power-off static stability analysis of a clean configuration of a hybrid buoyant aircraft. In: 8th Ankara International Aerospace Conference 2015, 10th-12th Sept. 2015, Metu, Ankara, Turkey.
UlHaque, Anwar and Asrar, Waqar and Omar, Ashraf A. and Sulaeman, Erwin and Syed Mohamed Ali, Jaffar (2015) Aerodynamics and Static Stability Characteristics of a Hybrid Buoyant Aerial Vehicle at Low Speed. In: 62nd Canadian Aerospace Institute Conference (Aero 2015), 19 - 21 May 2015, Montreal, Canada. (In Press)
ul-Haque, Anwar and Asrar, Waqar and Omar, Ashraf Ali and Sulaeman, Erwin and Syed Mohamed Ali, Jaffar (2014) Static longitudinal stability of a hybrid airship. In: 11th International Bhurban Conference on Applied Sciences & Technology (IBCAST), 14th-18th January 2014, Islamabad, Pakistan.
Syed Mohamed Ali, Jaffar and Abeid Abeid , Rubeya (2014) LEADME : an educational software for composite laminate analysis and design. In: 2nd International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2014), 23rd - 25th September 2014, Kuala Lumpur . (Unpublished)
Syed Mohamed Ali, Jaffar (2014) Thermoelastic solutions for flexure of anisotropic cylindrical shells. In: 2nd International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2014), 23rd - 25th September 2014, Kuala Lumpur . (Unpublished)
Syed Mohamed Ali, Jaffar and Shaik Dawood, Mohd. Sultan Ibrahim and Syed Muhammad, Kashif and Tariq, M. (2013) Analysis of composite box beam with piezoelectric actuators using ANSYS. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE' 13), 2nd-4th Jul. 2013, Kuala Lumpur, Malaysia.
Syed Mohamed Ali, Jaffar and Muhammad Muhaimin, M.Y. and Muhammad Faizal, C.N (2013) Design and development of IIUM hovercraft. In: 2nd International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE' 13), 2-4 July 2013, Kuala Lumpur, Malaysia. (Unpublished)
Suliman , M. M. Ali and Omar, Ashraf Ali and Syed Mohamed Ali, Jaffar (2013) Flow visualization over a circular planform wing. In: 2nd International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE' 13), 2-4 July 2013, Kuala Lumpur, Malaysia. (Unpublished)
Suliman , M. M. Ali and Omar, Ashraf Ali and Syed Mohamed Ali, Jaffar and M. Syuhairi |, M. Husain (2013) Numerical simulation of a low aspect ratio wing at low Reynolds number. In: 2nd International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE' 13), 2-4 July 2013, Kuala Lumpur, Malaysia. (Unpublished)
Omar, Nurihan and Syed Mohd, Sharifah Najwa and Aminanda, Yulfian and Syed Mohamed Ali, Jaffar and Kashif, Syed Muhammad (2011) Experimental observation of Jute/Epoxy composite plate subjected to impact loading. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE' 11), 17-19 May, 2011, Legend Hotel, Kuala Lumpur. (Unpublished)
Hasim, Fadilah and Rusyadi, Rusman and Surya, Wijaya Indra and , Fariduzzaman and Asrar, Waqar and Omar, Ashraf Ali and Syed Mohamed Ali, Jaffar and Aminanda, Yulfian and Kafafy, Raed (2008) The IIUM low speed wind tunnel. In: 2nd Engineering Conference on Sustainable Engineering Infrastructures Development & Management, 18-19 December 2008, Kuching Serawak. (Unpublished)
Hasim, Fadilah and Rusyadi, Rusman and Indra Surya, Wijaya and ., Fariduzzaman and Asrar, Waqar and Omar, Ashraf Ali and Syed Mohamed Ali, Jaffar and Aminanda, Yulfian and Kafafy, Raed (2008) Flow field characteristics of the IIUM low speed wind tunnel. In: 3rd International Symposium on Advanced Fluid/Solid Science and Technology in Experimental Mechanics, 7-10 Dec. 2008, Taiwan. (Unpublished)