Items where Author is "Sukindar, Nor Aiman"

Article

Kamaruddin, Shafie and Shamsulamri, Saiffaqrullah and Sharwazi, Muhammad Haziq Fakhri and Suhaimi, Muhammad Harith Ikhmal and Mohamad, Muhamad Ariff Othmani and Sukindar, Nor Aiman and Ahmad Azhar, Ahmad Zahirani (2024) Product design and development strategies for an automated Printed Circuit Board (PCB) defects detection systems. International Journal on Computational Engineering (COMIEN), 1 (3). pp. 75-78. E-ISSN 3047-7999

Mohamad Talhah Al Hafiz, Mohd Khata and Sukindar, Nor Aiman and Md Yasir, Ahmad Shah Hizam and Muhammad Fikri, Zawawi and Kamaruddin, Shafie and Ab Aziz, Ahmad Azlan (2024) Effect of the printing parameters on the tensile strength and surface roughness of a photopolymer resin using DLP 3D printing. Malaysian Journal of Microscopy, 20 (1). pp. 189-200. ISSN 1823-7010 E-ISSN 2600-7444

Mohd Khata, Mohamad Talhah Al Hafiz and Sukindar, Nor Aiman and Zawawi, Muhammad Fikri and Md Yasir, Ahmad Shah Hizam and Kamaruddin, Shafie and Ab Aziz, Ahmad Azlan (2024) Effect of the printing parameters on the tensile strength and surface roughness of a photopolymer resin using dlp 3d printing. Malaysian Journal of Microscopy, 20 (1). pp. 189-200. ISSN 1823 7010 E-ISSN 2600 7444

Ahmad Shah Hizam, Md Yasir and Sukindar, Nor Aiman and Ahmad Afif, Abdul Rahman Putra and Yang, Chuan Choong and Kamaruddin, Shafie and Aziz, Azlan and Aminanda, Yulfian and Sulaiman, Mohd Hafis (2024) Effect of heat treatment on mechanical properties and dimensional accuracy of 3D-Printed black carbon fiber HTPLA. Heliyon, 10 (11). ISSN 2405-8440

Sukindar, Nor Aiman and Md Yasir, Ahmad Shah Hizam and Azhar, Muhammad Danial and Md Azhar, Muhammad Afif and Abd Halim, Nor Farah Huda and Sulaiman, Mohd Hafis and Haji Ahmad Sabli, Ahmad Syamaizar and Mohd Ariffin, Mohd Khairol Anuar (2024) Evaluation of the surface roughness and dimensional accuracy of low-cost 3D-printed parts made of PLA–aluminum. Heliyon, 10 (4). pp. 1-13. ISSN 2405-8440

Ideris, Muhammad Haziq and Kamaruddin, Shafie and Sulaiman, Mohd Hafis and Sukindar, Nor Aiman and Ahmad Azhar, Ahmad Zahirani and Md Yasir, Ahmad Shah Hizam (2023) Effects of coating and lubrication on friction and wear for metal-to metal application. Journal of Advanced Research in Applied Mechanics, 110 (1). pp. 52-62. E-ISSN 2289-7895

Alli, Yakubu Adekunle and Anuar, Hazleen and Manshor, Mohd Romainor and Bankole, Owolabi Mutolib and Abd Rahman, Nurul Amirah and Olatunde, Simeon Kayowa and Omotola, Elizabeth Oyinkansola and Oladoye, Peter Olusakin and Ejeromedoghene, Onome and Suhr, Jonghwan and Sukindar, Nor Aiman and Mohd Nasir, Nur Aimi (2023) Influence of nanocomposites in extrusion-based 3D printing: a review. Hybrid Advances, 3. pp. 1-10. ISSN 2773-207X

Septiyana, Diah and Abd. Rahman, Mohamed and Mohamed Ariff, Tasnim Firdaus and Sukindar, Nor Aiman and Triblas Adesta, Erry Yulian (2023) Enhancing sustainability index parameter using ANFIS computational intelligence model. IIUM Engineering Journal, 24 (2). pp. 258-268. ISSN 1511-788X E-ISSN 2289-7860

Iftekar, Syed Fouzan and Sukindar, Nor Aiman and Amir, Adibah and Azami, Muhammad Hanafi and Aabid, Abdul (2023) Enhancing metal 3D printing with fused deposition modeling - a short review. International Journal of Research and Analytical Reviews (IJRAR), 10 (2). pp. 424-428. ISSN 2349-5138 E-ISSN 2348-1269

Sukindar, Nor Aiman (2023) Tech transfer boosts Sarawak’s handcraft businesses. Asia Research News (17 March 2023).

Septiyana, Diah and Abd Rahman, Mohamed and Mohamed Ariff, Tasnim Firdaus and Sukindar, Nor Aiman and Adesta, Erry Yulian Triblas (2023) Enhancing water sustainability index assessment through risk management, IoT, and artificial intelligence in water operation: a review. Water Conservation & Management, 7 (2). pp. 97-106. ISSN 2523-5664 E-ISSN 2523-5672

Sukindar, Nor Aiman and Md Azhar, Muhammad Afif and Ani, Mohd. Hanafi and Anuar, Hazleen and Kamaruddin, Shafie and Syed Shaharuddin, Sharifah Imihezri and Triblas Adesta, Erry Yulian (2022) A short review on the effect of nozzle geometry in 3D printing process using FDM system. ASEAN Journal of Engineering and Technology (AJET), 2 (2). pp. 1-4. E-ISSN 2710-5471

Sukindar, Nor Aiman and Mohd Samsudin, Noorazizi and Syed Shaharuddin, Sharifah Imihezri and Kamaruddin, Shafie (2022) The effects of FDM printing parameters on the compression properties of polymethylmethacrylate (PMMA) using finite element analysis. International Journal of Integrated Engineering, 14 (2). pp. 86-92. ISSN 2229-838X E-ISSN 2600-7916

Sukindar, Nor Aiman (2022) Getting a 3D hold on food manufacturing. Asia Research News, 31 May 2022.

Sukindar, Nor Aiman and Syed Shaharuddin, Sharifah Imihezri and Kamruddin, Shafie and Ahmad Azhar, Ahmad Zahirani and Yang, Chuan Choong and Mohd Samsudin, Noorazizi (2022) Comparison study on mechanical properties of 3d printed pla and pla/aluminium composites using fused deposition modeling method. Malaysian Journal of Microscopy, 18 (1). pp. 1-11. ISSN 1823-7010 E-ISSN 2600-7444

Sukindar, Nor Aiman and Md Azhar, Muhammad Afif and Syed Shaharuddin, Sharifah Imihezri and Kamaruddin, Shafie and Ahmad Azhar, Ahmad Zahirani and Yang, Chuan Choong and Triblas Adesta, Erry Yulian (2022) A review study on the effect of printing parameters of fused deposition modelling (fdm) metal polymer composite parts on mechanical properties and surface roughness. Malaysian Journal of Microscopy, 18 (1). pp. 281-297. ISSN 1823-7010 E-ISSN 2600-7444

Sukindar, Nor Aiman and Md Azhar, Muhammad Afif and Syed Shaharuddin, Sharifah Imihezri and Kamaruddin, Shafie and Ahmad Azhar, Ahmad Zahirani and Yang, Chuan Choong and Erry Yulian Triblas, Adesta (2022) A review study on the effect of printing parameters of fused deposition modelling (FDM) metal polymer composite parts on mechanical properties and surface roughness. Malaysian Journal of Microscopy, 18 (1). pp. 281-297. ISSN 1823-7010 E-ISSN 2600-7444

Mohd Asri, Nurul Anissa and Abdul Hamid, Abd. Malek and Shaffiar, Norhashimah and Sukindar, Nor Aiman and Syed Shaharuddin, Sharifah Imihezri and Hassan, Farid Syazwan (2022) Application of house of quality in the conceptual design of batik wax extruder and printer. IIUM Engineering Journal, 23 (1). pp. 1-23. ISSN 1511-788X E-ISSN 2289-7860

Wan Abdul Hamid, Wan Luqman Hakim and Basharuddin, Nurul 'Ilya and Sukindar, Nor Aiman (2022) Adaptive solar panel - overview and conceptual design. IOP Conf. Series: Materials Science and Engineering, 1244. pp. 1-7. ISSN 17578981, 1757-899X

Kamaruddin, Shafie and Rosdi, Mohamad Naqiuddin and Sukindar, Nor Aiman (2021) Optimization of drilling path using the bees algorithm. Manufacturing Technology, 21 (6). pp. 1-7. ISSN 1213–2489 E-ISSN 2787–9402 (In Press)

Sukindar, Nor Aiman and Mohd Samsuddin, Noorazizi and Syed Shaharuddin, Sharifah Imihezri and Kamaruddin, Shafie and Ahmad Azhar, Ahmad Zahirani and Yang, Chuan Chong and Ab Wahab, Muhammad Adil (2021) Implementation of 3D Printing Technology in the Food Industry. Scientific Review, 7 (4). pp. 50-54. ISSN 2413-8835 E-ISSN 2412-2599

Abdullah, Nur Azam and Ismail, Nor Izzuddin and Ismail, Izham Izzat and Azami, Muhammad Hanafi and Nordin, Norhuda Hidayah and Sukindar, Nor Aiman and Abidin, Zulkifli Zainal and Abu Bakar, Ahmad Joahari and Dani, Noriza (2021) Flow behaviour assessment of Smokey SAM rocket prototype. CFD Letters, 13 (9). pp. 42-56. ISSN 2180-1363

Sukindar, Nor Aiman and Awang Dahan, Azib Azhari and Abd Halim, Nor Farah Huda and Kamaruddin, Shafie and Sulaiman, Mohd Hafis (2020) The Effect of Printing Parameters on Scaffold Structure Using Low-cost 3D Printer. TEST Engineering & Management, 82. 8255 -8263. ISSN 0193-4120

Sukindar, Nor Aiman and Md Azhar, Muhammad Afif and Abd Halim, Nor Farah Huda and Kamaruddin, Shafie and Sulaiman, Mohd Hafis (2020) The effects of printing parameters on the surface quality of metal composite by using fused deposition modeling. Solid State Technology, 63 (5). pp. 866-874. E-ISSN 0038-111X

Mohd Ariffin, Khairul Anuar and Sukindar, Nor Aiman and Baharudin, B.T. Hang Tuah and Jaafar, Che Nor Aiza and Ismail, Mohd Idris Shah (2019) The effect of process parameters in extruding scaffold design using synthetic biomaterials. International Journal of Modern Manufacturing Technologies, XI (3). pp. 35-46. ISSN 2067–3604

Sukindar, Nor Aiman and Mohd Ariffin, Mohd Khairol Anuar and Baharudin, B. T. Hang Tuah and Jaafar, Che Nor Aiza and Ismail, Mohd Idris Shah (2018) Analysis of mechanical properties of polylactic acid using a new 3D printer nozzle. Journal of Computational and Theoretical Nanoscience, 15 (2). pp. 666-675. ISSN 1546-1955 E-ISSN 1546-1963

Sukindar, Nor Aiman and Mohd Ariffin, Mohd Khairol Anuar and Baharudin, B. T. Hang Tuah and Jaafar, Che Nor Aiza and Ismail, Mohd Idris Shah (2018) Effects of nozzle die angle on extruding polymethylmethacrylate in open-source 3D printing. Journal of Computational and Theoretical Nanoscience, 15 (2). pp. 663-665. ISSN 1546-1955 E-ISSN 1546-1963

Sukindar, Nor Aiman and Mohd Ariffin, Mohd Khairol Anuar and Baharudin, B. T. Hang Tuah and Jaafar, Che Nor Aiza and Ismail, Mohd Idris Shah (2017) Analysis on the impact process parameters on tensile strength using 3d printer repetier-host software. ARPN Journal of Engineering and Applied Sciences, 12 (102). pp. 3341-3346. ISSN 1819-6608

Sukindar, Nor Aiman and Mohd Ariffin, Mohd Khairol Anuar and Baharudin, B. T. Hang Tuah and Jaafar, Che Nor Aiza and Ismail, Mohd Idris Shah (2017) Analysis on temperature setting for extruding polylactic acid using open-source 3D printer. ARPN Journal of Engineering and Applied Sciences, 12 (4). pp. 1348-1353. ISSN 1819-6608

Sukindar, Nor Aiman and Mohd Ariffin, Mohd Khairol Anuar and Baharudin, B.T Hang Tuah and Jaafar, Che Nor Aiza and Ismail, Mohd Idris Shah (2017) Optimization of the parameters for surface quality of the open-source 3D printing. Journal of Mechanical Engineering, Special Issue 3 (1). pp. 33-43. ISSN 1823- 5514 E-ISSN 2550-164X

Sukindar, Nor Aiman and Ariffïn, M.K.A. and Baharudin, B. T. Hang Tuah and Jaafar, Che Nor Aiza and Ismail, Mohd Idris Shah (2016) Analyzing the effect of nozzle diameter in fused deposition modeling for extruding polylactic acid using open source 3D printing. Jurnal Teknologi, 78 (10). pp. 7-15. E-ISSN 2180–3722

Book Chapter

Kamaruddin, Shafie and Azmi, Nabilah and Sukindar, Nor Aiman (2022) Assembly sequence optimization using the bees algorithm. In: Enabling Industry 4.0 through Advances in Mechatronics. Lecture Notes in Electrical Engineering, 900 . Springer, Singapore, pp. 423-433. ISBN 978-981-19-2094-3

Sukindar, Nor Aiman and Wan Abdul Hamid, Wan Luqman Hakim and Kamaruddin, Shafie (2021) Analysis of printing parameters for tensile test using finite element analysis. In: Intelligent Manufacturing and Mechatronics. Springer. ISBN 978-981-16-0865-0 (Unpublished)

Sukindar, Nor Aiman (2016) Material structure and bonding. In: Material Science. Politeknik Kuching Sarawak, pp. 13-33. ISBN 978-967-0797-36-6

Proceeding Paper

Zainal Abidin, Muhammad Harith and Kamaruddin, Shafie and Adam Malek, Afiqah and Sukindar, Nor Aiman (2024) Application of the Bees Algorithm to find optimal drill path sequence. In: 5th International Symposium on Intelligent Manufacturing and Mechatronics (SIMM 2023), 12th July 2023, Virtual Conference.

Septiyana, Diah and Abd. Rahman, Mohamed and Mohamed Ariff, Tasnim Firdaus and Sukindar, Nor Aiman and Adesta, Erry Yulian Triblas (2023) ANFIS domestic water consumption model before and during Covid19 pandemic in Tangerang Indonesia. In: 5th International Conference on Advances in Manufacturing and Materials Engineering, ICAMME 2022, 9-10 August 2022, Kuala Lumpur.

Arief, Rudi Kurniawan and Sukindar, Nor Aiman and Hilmy, Irfan and Adesta, Erry Yulian Triblas (2023) Analysis of the adjusting bolts system’s contribution to levelling error of the heated bed in FDM 3D printer. In: Proceeding of 5th International Conference on Advances in Manufacturing and Materials Engineering, 9-10 August 2022, Kuala Lumpur.

Manshor, Mohd Romainor and Kamarulzaman, Amjad Fakhri and Anuar, Hazleen and Toha @ Tohara, Siti Fauziah and Ali, Fathilah and Sukindar, Nor Aiman and Suhr, Jonghwan and Haris, Nursyam Dzuha (2023) Optimizing tensile strength of PLA-Lignin Bio-composites using machine learning approaches. In: 5th International Conference on Advances in Manufacturing and Materials Engineering, 9th - 10th August 2022, Kuala Lumpur, Malaysia.

Md Azhar, Muhammad Afif and Sukindar, Nor Aiman and Ani, Mohd Hanafi and Anuar, Hazleen and Kamaruddin, Shafie and Syed Shaharuddin, Sharifah Imihezri and Mustafa, Mohd Yusry and Adesta, Erry Yulian Triblas and Arief, Rudi Kurniawan and Sulaiman, Mohd Hafis (2023) Review on fused deposition modelling extruder types with their specialities in filament extrusion process. In: 5th International Conference on Advances in Manufacturing and Materials Engineering, ICAMME 2022, 9-10 August 2022, Kuala Lumpur.

Md Azhar, Muhammad Afif and Sukindar, Nor Aiman and Ani, Mohd. Hanafi and Anuar, Hazleen and Kamaruddin, Shafie and Syed Shaharuddin, Sharifah Imihezri and Mustafa, Mohd Yusry and Adesta, Erry Yulian Triblas and Arief, Rudi Kurniawan and Sulaiman, Mohd Hafis (2023) Review on fused deposition modelling extruder types with their specialities in filament extrusion process. In: 5th International Conference on Advances in Manufacturing and Materials Engineering (ICAMME2022), 9th - 10th August 2022, Kuala Lumpur, Malaysia.

Sukindar, Nor Aiman and Idrus Saidi, Haidah Farzana Isma and Kamaruddin, Shafie and Yang, Chuan Choong and Syed Shaharuddin, Sharifah Imihezri and Morni, Murhamdilah (2023) Design simulation and development of prototype filling nozzle in food industry. In: 8th Brunei International Conference on Engineering and Technology 2021, 08 – 10 November 2021, Virtual.

Sulaiman, Mohd Hafis and Nordin, Norhuda Hidayah and Sukindar, Nor Aiman and Dahnel, Aishah Najiah and Kamaruddin, Shafie (2022) Friction and wear behaviours of hard-coated/uncoated bearing steels under nano-additive oil lubrication. In: 3rd Malaysian International Tribology Conference, MITC 2020, 28 - 30 September 2020, Langkawi, Malaysia.

Sukindar, Nor Aiman and Awang Dahan, Azib Azhari and Syed Shaharuddin, Sharifah Imihezri and Abd Halim, Nor Farah Huda (2021) Performance of low-cost 3D printer in medical application. In: Manufacturing Science and Engineering Conference ( Virtual Conference ), United State,Ohio. (Unpublished)

Abdullah, Nur Azam and Ismail, Nor Izzuddin and Azami, Muhammad Hanafi and Nordin, Norhuda Hidayah and Sukindar, Nor Aiman (2021) Aerodynamic assessment and development of Smokey SAM Prototype (TRL-6). In: 5th International Conference on Mechanical, Automotive and Aerospace Engineering 2021 (ICMAAE'21), 22 - 23 June 2021, Virtual. (Unpublished)

Mohd Ariffin, M K A and Sukindar, Nor Aiman and Baharudin, B.T. H T and Jaafar, C N A and Ismail, M I S (2018) Slicer method comparison using open-source 3D printer. In: 2017 International Conference on Power and Energy Engineering, 13th–15th September 2017, Ottawa, Canada.

Ab Tahir, Aliff and Nik Wan Zainun, Wan Hairilamei and Sukindar, Nor Aiman (2018) Kajian kesan suhu terhadap proses pengeringan halwa terung asam dengan menggunakan ketuhar perolakan. In: 3rd National Research and Innovation Conference (NRICon2018), 19th September 2018, Kuching, Sarawak.

Sukindar, Nor Aiman and Ab Tahir, Aliff (2018) Risk assessment on plan layout for project mechanical workshop in Politeknik Kuching Sarawak. In: 3rd National Research and Innovation Conference (NRICon2018), 19th September 2018, Kuching, Sarawak.

Sukindar, Nor Aiman and Mohd Ariffin, Mohd Khairol Anuar and Baharudin, B.T. Hang Tuah and Jaafar, Che Nor Aiza and Ismail, Mohd Idris Shah (2016) Comparison on dimensional accuracy using a newly developed nozzle for open-source 3D printer. In: 6 th edition of the International Conference on Aerospace, Robotics, Manufacturing Systems, Mechanical Engineering, Biomechatornics and Neurorehabilitation, 4th-6th November 2016, Bucharest, Romania.

Sukindar, Nor Aiman and Mohd Ariffin, Mohd Khairol Anuar and Baharudin, B.T. Hang Tuah and Jaafar, Che Nor Aiza and Ismail, Mohd Idris Shah (2016) Evaluation on the process parameters influencing the surface texture using open-source 3D printing. In: International Conference on Advanced Processes and Systems in Manufacturing (APSIM 2016), 28th-30th August 2016, Putrajaya.

Sukindar, Nor Aiman and Mohd Ariffin, Mohd Khairol Anuar (2016) An analysis on finding the optimum die angle of polylactic acid in fused deposition modelling. In: 2nd International Conference on Advanced Engineering and Technology (ICAET 2015), 11th-13th December 2015, Incheon, South Korea.

Sukindar, Nor Aiman and Mohd Ariffin, Mohd Khairol Anuar (2015) Analyzing of fused deposition modeling nozzle for extruding biomaterials. In: Technology and Innovation National Conference ( TECHON ) 2015 : Managing Transformation In Technology and Innovation Globalization, 9-11 June 2015, Hilton Hotel Kuching, Sarawak.

Copyright

Sukindar, Nor Aiman and Yang, Chuan Choong and Ahmad Azhar, Ahmad Zahirani and Kamaruddin, Shafie and Mel, Maizirwan (2021) 100gm Pouch Food Holder. [Copyright] (Unpublished)

Patent

Sukindar, Nor Aiman (2016) filament nozzle extruder for polylactic acid (PLA) material. PI 2016703433.