Items where Author is "Shaik Dawood, Mohd. Sultan Ibrahim "

Article

Beroual, Sabir and Hrairi, Meftah and Mohd Yatim, Norfazrina Hayati and Shaik Dawood, Mohd. Sultan Ibrahim (2024) Solar cell micro crack detection technique using electromechanical impedance and finite element analysis. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 238 (8). pp. 3531-3548. ISSN 0954-4062 E-ISSN 2041-2983

Pakry, Nur Amalina and Syed Mohamed Ali, Jaffar and Shaik Dawood, Mohd. Sultan Ibrahim and Mokhtar, Hanan (2024) Effect of material properties on the behaviour of cross-ply laminated cylindrical shells under thermo-mechanical load. Journal of Advanced Research in Applied Mechanics, 114 (1). pp. 51-65. E-ISSN 2289-7895

Akhlaq, Adnan and Shaik Dawood, Mohd. Sultan Ibrahim and Jaffar Syed, Mohamed Ali and Sulaeman, Erwin (2023) A study on the effect of piezoelectric nonlinearity on the bending behaviour of smart laminated composite beam. Materials, 16 (7). pp. 1-19. E-ISSN 1996-1944

Syed Abd Rahman AlQudsy, Sharifah Nadhirah and Syed Mohamed Ali, Jaffar and Shaik Dawood, Mohd. Sultan Ibrahim and Rosli, Adib Hamdani (2023) Influence of composite skin on the energy absorption characteristics of an aircraft fuselage. International Journal of Engineering Materials and Manufacture, 8 (1). pp. 13-20. E-ISSN 0128-1852

Malik, Khurshid and Ahmad, Faiz and Yunus, Nurul Azhani and Gunister, Ebru and Shaik Dawood, Mohd. Sultan Ibrahim and Ali, Saad and Mani, Catherine Sheila and Syahir, Muhammad and Leon Larry, Anselm (2022) The hybridization effects of glass and carbon fibers on the mechanical properties of kenaf mat/epoxy composites. Journal of Natural Fibers, 19 (17). pp. 15432-15447. ISSN 1544-0478 E-ISSN 1544-046X

Khurshid, Malik and Ahmad, Faiz and Yunus, Nurul Azhani and Nakato, Teruyuki and Mouri, Emiko and Shaik Dawood, Mohd. Sultan Ibrahim and Memon, I (2022) A new method of reinforcing graphene nanoplatelets in glass/epoxy composites. Material Science and Engineering Technology. (In Press)

Zulkepli, I.I. and Mokhtar, Hanan and Shaik Dawood, Mohd. Sultan Ibrahim and Aminanda, Yulfian and Mohamed Rehan, Muhammad Saifuddin (2020) Experimental study on Empty Fruit Bunch (EFB) composite subjected to three point bending using ANOVA technique. TEST Engineering & Management, 83 (May – June 2020). pp. 1248-1255. ISSN 0193-4120

Awang Bujang, Awang Hadi Ifwat and Hrairi, Meftah and Shaik Dawood, Mohd. Sultan Ibrahim (2019) Determination of stress intensity factor of actuated cracked aluminum plate using strain gages. International Journal of Recent Technology and Engineering (IJRTE), 7 (6S). pp. 241-245. ISSN 2277-3878

Aabid, Abdul and Hrairi, Meftah and Shaik Dawood, Mohd. Sultan Ibrahim (2019) Modeling different repair configurations of an aluminum plate with a hole. International Journal of Recent Technology and Engineering (IJRTE), 7 (6S). pp. 235-240. ISSN 2277-3878

Syed Mohamed Ali, Jaffar and Mahmood, Munir Mohamed and Shaik Dawood, Mohd. Sultan Ibrahim (2019) Shape control of composite plates with piezoelectric actuators. International Journal of Recent Technology and Engineering (IJRTE), 7 (6S). pp. 219-223. ISSN 2277-3878

Zakaria, Mushab and Shaik Dawood, Mohd. Sultan Ibrahim and Aminanda, Yulfian and Ahmad Rashidi, Syazwan and Mat Sah, Mohd Azizi (2019) Spring back of thick curved uni-directional carbon fibre reinforced composite laminate for aircraft structure application. International Journal of Recent Technology and Engineering (IJRTE), 7 (6S). pp. 224-228. ISSN 2277-3878

Abuzaid, Ahmed and Hrairi, Meftah and Shaik Dawood, Mohd. Sultan Ibrahim (2018) Experimental and numerical analysis of piezoelectric active repair of edge-cracked plate. Journal of Intelligent Material Systems and Structures, 29 (18). pp. 3656-3666. ISSN 1045-389X E-ISSN 1530-8138

Abuzaid, Ahmed and Hrairi, Meftah and Shaik Dawood, Mohd. Sultan Ibrahim (2018) Evaluating the reduction of stress intensity factor in center-cracked plates using piezoelectric actuators. Actuators, 7 (2). pp. 1-13. ISSN 2076-0825

Rahimi, Norzihan and Hussain, Ahmad Kamil and Shaik Dawood, Mohd. Sultan Ibrahim and Mohd Alias, Adib Zulfadhli and Md Yusoff, Muhamed Hafiy Afiq and Mahmud, Jamaluddin (2018) Failure analysis of woven Kevlar/Epoxy under uniaxial tension. International Journal of Engineering and Technology(UAE), 7 (4). pp. 235-239. ISSN 2227-524X

Eshteyah, Mohanna Moh'd Saleem and Hrairi, Meftah and Shaik Dawood, Mohd. Sultan Ibrahim (2017) Numerical investigation of springback in mechanical clinching process. International Journal of Engineering Materials and Manufacture, 2 (4). pp. 86-93. E-ISSN 0128-1852

Abuzaid, Ahmed and Hrairi, Meftah and Shaik Dawood, Mohd. Sultan Ibrahim (2017) Modeling approach to evaluating reduction in stress intensity factor in center-cracked plate with piezoelectric actuator patches. Journal of Intelligent Material Systems and Structures, 28 (10). pp. 1334-1345. ISSN 1045-389X E-ISSN 1530-8138

Hasan, Muhamad Abid and H. Shah, Qassim and Shaik Dawood, Mohd. Sultan Ibrahim (2017) Perforation of polycarbonate sheet when subjected to impact test– A review. International Journal of Applied Engineering Research, 12 (24). pp. 14514-14522. ISSN 0973-4562 E-ISSN 0973-9769

Ahamd Ghazilan, Ahmad Luqman and Mokhtar, Hanan and Shaik Dawood, Mohd. Sultan Ibrahim (2016) Effect of thread material and stitch orientation on tensile mechanical property of stitched oil palm empty fruit bunch fiber reinforced epoxy composites. Journal of Built Environment, Technology and Engineering, 1. pp. 282-288. ISSN 0128-1003

Tahmasebpour, Kamyar and Hrairi, Meftah and Shaik Dawood, Mohd. Sultan Ibrahim (2015) Finite element simulation of electro-mechanical impedance technique. Advanced Materials Research, 1115. pp. 539-542. ISSN 1022-6680

Abuzaid, Ahmed and Hrairi, Meftah and Shaik Dawood, Mohd. Sultan Ibrahim (2015) Survey of active structural control and repair using piezoelectric patches. Actuators, 4. pp. 77-98. ISSN 2076-0825

Abuzaid, Ahmed and Hrairi, Meftah and Shaik Dawood, Mohd. Sultan Ibrahim (2015) Mode I stress intensity factor for a cracked plate with an integrated piezoelectric actuator. Advanced Materials Research, 1115. pp. 517-522. ISSN 1022-6680

Abuzaid, Ahmed and Shaik Dawood, Mohd. Sultan Ibrahim and Hrairi, Meftah (2015) Effects of adhesive bond on active repair of aluminium plate using piezoelectric patch. Applied Mechanics and Materials, 799-80. pp. 788-793. ISSN 1660-9336

Eshteyah, Mohanna and Hrairi, Meftah and Shaik Dawood, Mohd. Sultan Ibrahim and Mohiuddin, A. K. M. (2015) Finite element modeling of clinching process for joining dissimilar materials. Advanced Materials Research, 1115. pp. 109-112. ISSN 1022-6680

Abuzaid, Ahmed and Shaik Dawood, Mohd. Sultan Ibrahim and Hrairi, Meftah (2015) The effect of piezoelectric actuation on stress distribution in aluminum plate with circular hole. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 9723-9729. ISSN 1819-6608

Syed Mohamed Ali, Jaffar and Syed Muhammad, Kashif and Shaik Dawood, Mohd. Sultan Ibrahim and Omar, Ashraf Ali (2014) Study on the effect of window opening on the drag characteristics of a car. International Journal of Vehicle Systems Modelling and Testing, 9 (3-4). pp. 311-320. ISSN 1745-6444 (O), 1745-6436 (P)

Wan Abdul Hamid, Wan Luqman Hakim and Aminanda, Yulfian and Shaik Dawood, Mohd. Sultan Ibrahim (2013) Experimental Investigation on the Energy Absorption Capability of Foam-filled Nomex Honeycomb Structure. Applied Mechanics and Materials, 393. pp. 460-466. ISSN 1660-9336

Jaafar, Israd Hakim and Shaik Dawood, Mohd. Sultan Ibrahim and Amin, A. K. M. Nurul and Shah, Qasim Hussain (2012) Modeling of a turning tool holder with finite elements and simulation of its free vibration frequencies. Advanced Materials Research, 576. pp. 659-664. ISSN 1022-6680

Shaik Dawood, Mohd. Sultan Ibrahim and Iannucci, Lorenzo and Greenhalgh, Emile S. (2008) Three-dimensional static shape control analysis of composite plates using distributed piezoelectric actuators. Smart Materials and Structures, 17 (2). pp. 1-10. ISSN 0964-1726

Book

Alam, A. H. M. Zahirul and Alam, Md Zahangir and Shaik Dawood, Mohd. Sultan Ibrahim, eds. (2023) IIUM Engineering Congress Proceedings (IIUMECP). Kulliyyah of Engineering, IIUM, Kuala Lumpur, Malaysia.

Proceeding Paper

Akhlaq, Adnan and Shaik Dawood, Mohd. Sultan Ibrahim and Mohamed Ali, Jaffar Syed and Sulaeman, Erwin (2022) A review of effect of higher order nonlinear theories on analysis of Piezoelectric laminates. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2021), 21st - 23rd June 2021, Kuala Lumpur, Malaysia.

Rahman, Muhammad and Alsubari, Saleh and Syed Mohamed Ali, Jaffar and Hrairi, Meftah and Shaik Dawood, Mohd. Sultan Ibrahim (2021) Assessment of shell theories for cross-ply and angle-ply laminated cylindrical shells under thermo-mechanical loads. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2021), 22-23 June 2021, Kuala Lumpur, Malaysia. (Unpublished)

Syed Abd Rahman AlQudsy, Sharifah Nadhirah and Mohamed Ali, Jaffar Syed and Shaik Dawood, Mohd. Sultan Ibrahim (2021) Crash analysis of aircraft composite fuselage under belly landing. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2021), 22-23 June 2021, Kuala Lumpur, Malaysia. (Unpublished)

Zulkepli, I.I. and Mokhtar, Hanan and Aminanda, Yulfian and Shaik Dawood, Mohd. Sultan Ibrahim and Mohamed Rehan, Muhammad Saifuddin (2019) Review of manufacturing process for good quality of composite assessment. In: 4th International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2018), 19th-20th September 2018, Kuala Lumpur, Malaysia.

Awang Bujang, Awang Hadi Ifwat and Hrairi, Meftah and Shaik Dawood, Mohd. Sultan Ibrahim (2018) Determination of stress intensity factor of actuated cracked aluminum plate using strain gages. In: 4th International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2018), 19-20 September 2018, Kuala Lumpur, Malaysia. (Unpublished)

Aabid, Abdul and Hrairi, Meftah and Shaik Dawood, Mohd. Sultan Ibrahim (2018) Modeling different repair configurations of an aluminum plate with a hole. In: 4th International Conference on Mechanical, Automotive, and Aerospace Engineering 2018 (ICMAAE’18), 19th-20th September 2018, Kuala Lumpur. (Unpublished)

Alsubari, Saleh and Syed Mohamed Ali, Jaffar and Aminanda, Yulfian and Shaik Dawood, Mohd. Sultan Ibrahim (2017) Effect of temperature and moisture dependent material properties on the bending behavior of laminated cylindrical shell under hygrothermal loads. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25-27 July 2016, Kuala Lumpur, Malaysia.

Abuzaid, Ahmed and Hrairi, Meftah and Shaik Dawood, Mohd. Sultan Ibrahim (2017) Estimation of stress concentration factor of plate with hole using piezoelectric actuator and finite element method. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25th-27th July 2016, Kuala Lumpur, Malaysia.

Labanieh, Mohamad Fateh and Syed Mohamed Ali, Jaffar and Shaik Dawood, Mohd. Sultan Ibrahim (2017) Optimal location of piezoelectric patches for active vibration control. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE '16), 25th-27th July 2016, Kuala Lumpur.

Abd Kadir, Nurdina and Aminanda, Yulfian and Shaik Dawood, Mohd. Sultan Ibrahim and Mohktar, Hanan (2017) A study on the parameters affecting the properties of coated paper honeycomb. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25th-27th July 2016, Kuala Lumpur, Malaysia.

Shaik Dawood, Mohd. Sultan Ibrahim and Ahmad Ghazilan, Ahmad Luqman and Shah, Qasim Hussain (2017) Finite element analysis of a composite crash box subjected to low velocity impact. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering, ICMAAE 2016, 3 April 2017, Kulliyyah of Engineering, International Islamic University Malaysia (IIUM)Kuala Lumpur; Malaysia.

Ahmad Ghazilan, Ahmad Luqman and Mokhtar, Hanan and Shaik Dawood, Mohd. Sultan Ibrahim and Aminanda, Yulfian and Mohamed Ali, Jaffar Syed (2017) Tensile mechanical property of oil palm empty fruit bunch fiber reinforced epoxy composites. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering, ICMAAE 2016, 25th-27th July 2016, Kuala Lumpur.

Aminanda, Yulfian and Abd Kadir, Nurdina and Shaik Dawood, Mohd. Sultan Ibrahim and Mokhtar, Hanan (2016) Experimental study on energy absorption of foam filled kraft paper honeycomb subjected to quasi-static uniform compression loading. In: 6th Innovation in Aerospace Engineering and Technology, AEROTECH 2016, 8-9 Nov 2016, Kuala Lumpur.

Tahmasebpour, Kamyar and Hrairi, Meftah and Shaik Dawood, Mohd. Sultan Ibrahim (2015) Finite element simulation of electro-mechanical impedance technique. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2014), 23-25 September 2014, Kuala Lumpur. (Unpublished)

Idres, Moumen and Suliman, Suliman and Kafafy, Raed Ismail and Shaik Dawood, Mohd. Sultan Ibrahim (2014) Orifice plate flowmeter performance under pulsating flow conditions. In: Automotive and Vehicle Technologies Conference (AVTECH) 2013, 2-4 Oct 2013, Yildiz Technical University, Istanbul, Turkey.

Abuzaid, Ahmed and Hrairi, Meftah and Shaik Dawood, Mohd. Sultan Ibrahim (2014) Derivation of stress intensity factor for a cracked plate with an integrated piezoelectric actuator. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2014), 23-25 September 2014, Kuala Lumpur. (Unpublished)

Syed Muhammad, Kashif and Shaik Dawood, Mohd. Sultan Ibrahim and Abdur Razzak, M. and Azram, Mohammad and UNSPECIFIED (2013) Study of the effect of different curing setups on mechanical properties of low cost composite structures. In: 2nd International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2013), 2-4 July 2013, Kuala Lumpur, Malaysia. (Unpublished)

Syed Mohamed Ali, Jaffar and Shaik Dawood, Mohd. Sultan Ibrahim and Syed Muhammad, Kashif and Tariq, M. (2013) Analysis of composite box beam with piezoelectric actuators using ANSYS. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE' 13), 2nd-4th Jul. 2013, Kuala Lumpur, Malaysia.

Kolo, Isa and Idres, Moumen and Kafafy, Raed and Shaik Dawood, Mohd. Sultan Ibrahim (2013) Three-dimensional vibration analysis of fluid-filled pipes. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2013), 2 - 4 July 2013, Kuala Lumpur, Malaysia. (Unpublished)

Iannucci, L and Shaik Dawood, Mohd. Sultan Ibrahim and Greenhalgh, E and Ariffin, A. K. (2009) Delamination control in composite beams using piezoelectric actuators. In: 17th International Conference on Composite Materials, Edinburgh UK.