Items where Author is "Shah, Qasim Hussain"

Article

Al-Bahash, Zeid Fadel and Ansari, M.N.M. Ansari and Shah, Qasim Hussain (2018) Design and simulation of a rear underride protection device (RUPD)for heavy vehicles. International Journal of Crashworthiness, 23 (1). pp. 47-56. ISSN 1358-8265 E-ISSN 1754-2111

Abdulkareem, Suleiman and Khan, Ahsan Ali and Shah, Qasim Hussain and Konneh, Mohamed (2017) Temperature distribution in copper electrode during electrical discharge machining process. International Journal of Integrated Engineering, 9 (1). pp. 39-43. ISSN 2229-838X

Sopyan, Iis and Gunawan, Gunawan and Shah, Qasim Hussain and Mel, Maizirwan (2016) Fabrication and sintering behavior of zinc-doped biphasic calcium phosphate bioceramics. Materials and Manufacturing Processes, 31 (6). pp. 713-718. ISSN 1042-6914 E-ISSN 1532-2475

Kausalyah, Venkatason and Shasthri, Sivaguru and Abdullah, Kassim Abdulrahman and Mahmoud Idres, Moumen Mohammed and Shah, Qasim Hussain (2016) Development and optimization of passenger car front profile using polynomial response surface method. ARPN Journal of Engineering and Applied Sciences, 11 (8). pp. 5161-5166. ISSN 1819-6608

Shasthri, Sivaguru and Kausalyah, Venkatason and Shah, Qasim Hussain and MahmoudIdres, Moumen Mohamed and Wong, S. V. (2016) A parametric study of neck moment response in a 3 year old child subjected to oblique side impact. ARPN Journal of Engineering and Applied Sciences, 11 (8). pp. 5126-5133. ISSN 1819-6608

Shah, Qasim Hussain and Topa, Ameen (2015) Investigation of energy absorption capabilities of compressed and uncompressed crushable foams. Mechanical Engineering Journal, 2 (5). pp. 1-8. ISSN 2187-9745

Venkatason, Kausalyah and Shasthri, Sevaguru and Abdullah, Kassim Abdulrahman and Idres, Moumen and Shah, Qasim Hussain and Wong, Sha Voon (2015) Vehicle profile optimization using central composite design for pedestrian injury mitigation. Applied Mathematics & Information Sciences, 9 (1). pp. 197-204. ISSN 1935-0090

Shah, Qasim Hussain and Topa, Ameen (2014) Modeling large deformation and failure of expanded polystyrene crushable foam using LS-DYNA. Modelling and Simulation in Engineering, 2014 (292647). pp. 1-7. ISSN 1687-5591

Kausalyah, Venkatason and Shasthri, Sevaguru and Abdullah, Kassim Abdulrahman and Idres, Moumen and Shah, Qasim Hussain (2014) Development of economical vehicle model for pedestrian-friendly front-end profile study. International Journal of Simulation Modelling, 13 (4). pp. 419-432. ISSN 1726-4529

Topa, Ameen and Shah, Qasim Hussain (2014) Failure prediction in bulk metal forming process. International Journal of Manufacturing Engineering, 2014. ISSN http://www.hindawi.com/journals/ijme/

Venkatason, Kausalyah and Shasthri, Sevaguru and Abdullah, Kassim Abdulrahman and Idres, Moumen and Shah, Qasim Hussain and Wong, Sha Voon (2014) Head injury mitigation of an adult and child pedestrian in a frontal vehicle impact using response surface methodology. Applied Mechanics and Materials, 575. pp. 952-955. ISSN 1660-9336 (O), 978-303785262-0 (P)

Venkatason, Kausalyah and Abdullah, Kassim Abdulrahman and Shasthri, Sevaguru and Idres, Moumen and Shah, Qasim Hussain and Wong, Sha Voon (2014) Injury analysis validation of a deformable vehicle front end model. Applied Mechanics and Materials, 465-66. pp. 1334-1338. ISSN 1660-9336

Shah, Qasim Hussain and Aung, Kya Myo (2014) Investigation of glass plate failure mechanism subjected to copper and steel projectile impacts. IIUM Engineering Journal, 15 (1). pp. 17-31. ISSN 1511-788X

Shasthri, Sevaguru and Venkatason, Kausalyah and Shah, Qasim Hussain and Idres, Moumen and Abdullah, Kassim Abdulrahman and Wong, Sha Voon (2014) Lateral side impact crash simulation of restrained 3 year old child. Applied Mechanics and Materials, 663. pp. 590-595. ISSN 1660-9336

Shasthri, Sevaguru and Venkatason, Kausalyah and Shah, Qasim Hussain and Abdullah, Kassim Abdulrahman and Idres, Moumen and Wong, Sha Voon (2014) Neck moment characterization of restrained child occupant at realistic nontest standard higher impact speed of 32.2 km/h. International Journal of Vehicular Technology, 2014. pp. 1-8. ISSN 16875702

Shasthri, Sevaguru and Venkatason, Kausalyah and Shah, Qasim Hussain and Abdullah, Kassim Abdulrahman and Idres, Moumen and Wong, Sha Voon (2014) Neck moment response characterization of restrained child occupant at standard test impact speed 24.4 km/h. Research Journal of Applied Sciences, Engineering and Technology, 8 (1). pp. 113-119. ISSN 2040-7459 E-ISSN 2040-7467

Topa, Ameen and Shah, Qasim Hussain (2014) Numerical simulations of bulk metal forming process with smooth particle hydrodynamics. Australian Journal of Basic and Applied Sciences, 8 (15). pp. 198-204. ISSN 1991-8178

Venkatason, kausalyah and shasthri, Sevaguru and Abdullah, Kassim Abdulrahman and Idres, Moumen and Shah, Qasim Hussain and Wong, Sha Voon (2014) Optimisation of vehicle front-end geometry for adult and pediatric pedestrian protection. International Journal of Crashworthiness. pp. 1-9. ISSN 1358-8265 (Print), 1754-2111 (Online)

Shasthri, Sevaguru and Venkatason, Kausalyah and Shah, Qasim Hussain and Abdullah, Kassim Abdulrahman and Idres, Moumen and Wong , Sha Voon (2014) Parameter study of neck force in restrained 3 year old child involved in vehicle side impact. Australian Journal of Basic and Applied Sciences, 8 (9). pp. 145-154. ISSN 1991-8178

Shasthri, Sevaguru and Venkatason, Kausalyah and Shah, Qasim Hussain and Abdullah, Kassim Abdulrahman and Idres, Moumen and Wong, Sha Voon (2014) Parametric study for head injury criteria response of three-year olds in a child restraint system in oblique and lateral intrusive side impact. International Journal of Crashworthiness, 2014. pp. 1-11. ISSN 1358-8265 (Print), 1754-2111 (Online)

Venkatason, Kausalyah and Shasthri, Sevaguru and Abdullah, Kassim Abdulrahman and Idres, Moumen and Shah, Qasim Hussain and Wong, Sha Voon (2014) Validation of pedestrian impactor testing upon hybrid vehicle front end profile. International Journal of Vehicle Systems Modelling and Testing, 9 (3/4). pp. 342-351. ISSN 1745-6444 (O), 1745-6436 (P)

Shah, Qasim Hussain and Hamdani, Adib (2013) The damage of unconfined granite edge due to the impact of varying stiffness projectiles. International Journal of Impact Engineering, 59. pp. 11-17. ISSN 0734-743X

Venkatason, Kausalyah and Shasthri, Sevaguru and Abdullah, Kassim Abdulrahman and Idres, Moumen and Shah, Qasim Hussain and Wong, Sha Voon (2013) Crash kinematics and injury criteria validation for a deformable hybrid vehicle model. Applied Mechanics and Materials, 663. pp. 627-631. ISSN 1660-9336

Venkatason, Kausalyah and Shasthri, Sevaguru and Abdullah, Kassim Abdulrahman and Idres, Moumen and Shah, Qasim Hussain and Wong, Sha Voon (2013) Injury analysis validation of a deformable vehicle. Applied Mechanics and Materials, 465/66. pp. 1334-1338. ISSN 1660-9336

Shah, Qasim Hussain and Naily, Hanis and Ramly, Nur Syuhada (2012) Effect of tapered angle of a conical nose indenter on the energy absorbing variation of a copper pipe subjected to axial crushing. International Journal of Engineering Systems Modelling and Simulation, 4 (4). pp. 174-180. ISSN 1755-9766

Maleque, Md. Abdul and Adebisi, Adetayo A. and Shah, Qasim Hussain (2012) Energy and cost analysis of weight reduction using composite brake rotor. International Journal of Vehicle Structures & Systems, 4 (2). pp. 69-73. ISSN 0975-3540 (O), 0975-3060 (P)

Jaafar, Israd Hakim and Shaik Dawood, Mohd. Sultan Ibrahim and Amin, A. K. M. Nurul and Shah, Qasim Hussain (2012) Modeling of a turning tool holder with finite elements and simulation of its free vibration frequencies. Advanced Materials Research, 576. pp. 659-664. ISSN 1022-6680

Adebisi, Adetayo A. and Maleque, Md. Abdul and Shah, Qasim Hussain (2011) Surface temperature distribution in a composite brake rotor. International Journal of Mechanical and Materials Engineering (IJMME), 6 (3). pp. 356-361. ISSN 1823-0334

Shah, Qasim Hussain and Abdullah, Kassim (2011) Evaluation of friction welded bi-material joint strength subjected to impact loads. Advanced Materials Research, 264. pp. 719-725. ISSN 1662-8985

Sopyan, Iis and Nawawi, Natasha Ahmad and Shah, Qasim Hussain and Ramesh, Singh and Tan, Chou Yong and Abd Shukor, Mohd Hamdi (2011) Sintering and properties of dense manganese-doped calcium phosphate bioceramics prepared using sol-gel derived nanopowders. Materials and Manufacturing Processes, 26. pp. 908-914. ISSN 1532-2475 ; 1042-6914

Yusof, Faridah and Salawudeen, T. Olalekan and Shah, Qasim Hussain and Al-Khatib, Ma'an Fahmi Rashid and Muyibi, Suleyman Aremu (2011) Chemical resistance tests on PP-ternary nanocomposite for its application in bioreactor liner fabrication. Science China Technological Sciences, 54 (8). pp. 2217-2223. ISSN 1869-1900 (O), 1674-7321 (P)

Olalekan, Salawudeen Taofeeq and Al-Khatib, Ma'an Fahmi Rashid and Yusof, Faridah and Shah, Qasim Hussain and Muyibi, Suleyman Aremu (2011) Effect of processing conditions in the preparation of PP-Ternary Nanocomposite using MWCNT as secondary filler. Journal of Materials Science and Engineering, 5. pp. 130-144. ISSN 1934-8959

Abid, Hasan M. and Shah, Qasim Hussain and Faris, Waleed Fekry (2011) The structural integrity assessment of a partially filled tank pertaining to liquid sloshing upon sudden brake applications. International Journal of Vehicle Systems Modelling and Testing, 6 (3/4). pp. 307-317. ISSN 1745-6444 (O), 1745-6436 (P)

Olalekan, Salawudeen Taofeeq and Qudseih, Isam Yassin and Kabbashi, Nassereldeen Ahmed and Al-Khatib, Ma'an Fahmi Rashid and Muyibi, Suleyman Aremu and Yusof, Faridah and Shah, Qasim Hussain (2010) Effect of modification on the physicochemical and thermal properties of organophilic clay modified with Octadecylamine. International Journal of Engineering and Technology, 10 (1). pp. 23-31. ISSN 2077-1185

Iis, Sopyan and Ahmad Nawawi, Natasha and Shah, Qasim Hussain (2010) Dense manganese doped biphasic calcium phosphate for load bearing bone implants. Advanced Materials Research, 93-94. pp. 393-396. ISSN 1022-6680

Olalekan, Salawudeen Taofeeq and Muyibi, Suleyman Aremu and Shah, Qasim Hussain and Al-Khatib, Ma'an Fahmi Rashid and Yusof, Faridah and Qudsieh, Isam Y. (2010) Improving the polypropylene-clay composite using carbon nanotubes as secondary filler. Energy Research Journal, 1 (2). pp. 68-72. ISSN 1949-016x (O), 1949-0151 (P)

Shah, Qasim Hussain and Abakrb, Yousif A. (2007) A comparison of energy absorbing capabilities of paper and steel structures subjected to progressive failure under free falling objects. Journal of Engineering Science and Technology , 2 (2). pp. 200-210. ISSN 1823-4690

Shah, Qasim Hussain and Azram, Mohammad and Iliyas, M. H. (2005) Predicting the crack initiation fracture toughness for a crack along the bimaterial interface. Journal of Applied Sciences, 5 (2). pp. 253-256. ISSN 1812-5654

Shah, Qasim Hussain and Homma, H. and Iliyas, M. H. and Ismail, Ahmad Faris (2005) The effect of material property gradient on the fracture toughness of a PMMA/PC bimaterial with a crack normal to the interface. Journal of Applied Sciences, 5 (3). pp. 476-481. ISSN 1812-5654

Homma, H. and Shah, Qasim Hussain and Kawada, S. (1995) Effect of temperature gradient on crack initiation. International Journal of Pressure Vessels & Piping, 63 (3). pp. 339-345. ISSN 0308-0161

Shah, Qasim Hussain and Homma, H. (1995) Fracture criterion of materials subjected to temperature gradient. International Journal of Pressure Vessels & Piping, 62 (1). pp. 59-68. ISSN 0308-0161

Shah, Qasim Hussain and Homma, H. (1994) Fracture toughness of materials subjected to a temperature gradient. International Journal of Pressure Vessels and Piping, 57 (2). pp. 223-230. ISSN 0308-0161

Book

Shah, Qasim Hussain and Abid, Hasan M. (2011) From LS-PREPOST to LS-DYNA: an introduction: LS-Dyna for beginners with 13 step by step solved examples. Lap Lambert Academic Publishing, Saarbrucken, Germany. ISBN 9783845409511

Book Chapter

Shah, Qasim Hussain and M. Abid, Hasan and Rosli, Abid (2011) Cylindrical shell buckling under axial compression load. In: Advanced Topics in Mechanical Behavior of Materials. IIUM Press, Kuala Lumpur, pp. 3-7. ISBN 9789674181741

Shah, Qasim Hussain and Abid, Hasan M. and Rosli, Adib (2011) Damage assessment of liquid filled container subjected to free fall on rigid steel plate. In: Advanced Topics in Mechanical Behavior of Materials. IIUM Press, Kuala Lumpur, pp. 127-133. ISBN 9789674181741

Shah, Qasim Hussain and Abid, Hasan M. and Rosli, Adib (2011) Damage of polycarbonate armor plate subjected to impact. In: Advanced Topics in Mechanical Behavior of Materials. IIUM Press, Kuala Lumpur, pp. 106-111. ISBN 9789674181741

Shah, Qasim Hussain and Abid, Hasan M. and Rosli, Adib (2011) Energy absorbing capability of materials subjected to impact under gravity loading. In: Advanced Topics in Mechanical Behavior of Materials. IIUM Press, Kuala Lumpur, pp. 120-126. ISBN 9789674181741

Shah, Qasim Hussain and M. Abid, Hasan and Rosli, Abid (2011) Experimental and simulation results of cylindrical shell buckling. In: Advanced Topics in Mechanical Behavior of Materials. IIUM Press, Kuala Lumpur, pp. 41-47. ISBN 9789674181741

Shah, Qasim Hussain and M. Abid, Hasan and Rosli, Abid (2011) Experimental results of empty and water filled cylindrical shell buckling. In: Advanced Topics in Mechanical Behavior of Materials. IIUM Press, Kuala Lumpur, pp. 13-17. ISBN 9789674181741

Shah, Qasim Hussain and M. Abid, Hasan and Rosli, Abid (2011) Experimental results of empty and water filled cylindrical shell buckling for 50mm stroke. In: Advanced Topics in Mechanical Behavior of Materials. IIUM Press, Kuala Lumpur, pp. 18-23. ISBN 9789674181741

Shah, Qasim Hussain and M. Abid, Hasan and Rosli, Abid (2011) Experimental results of empty and water filled cylindrical shell buckling for 60mm stroke. In: Advanced Topics in Mechanical Behavior of Materials. IIUM Press, Kuala Lumpur, pp. 24-29. ISBN 9789674181741

Shah, Qasim Hussain and Abid, Hasan M. and Rosli, Adib (2011) Experimental results of pipe whip impact. In: Advanced Topics in Mechanical Behavior of Materials. IIUM Press, Kuala Lumpur, pp. 71-76. ISBN 978-967-418-174-1

Shah, Qasim Hussain and M. Abid, Hasan and Rosli, Abid (2011) Experimental setup of empty and water filled cylindrical shell buckling. In: Advanced Topics in Mechanical Behavior of Materials. IIUM Press, Kuala Lumpur, pp. 8-12. ISBN 9789674181741

Shah, Qasim Hussain and Abid, Hasan M. and Rosli, Adib (2011) Experimental setup of pipe whip impact. In: Advanced Topics in Mechanical Behavior of Materials. IIUM Press, Kuala Lumpur, pp. 66-70. ISBN 978-967-418-174-1

Shah, Qasim Hussain and Abid, Hasan M. and Rosli, Adib (2011) Failure mechanism of PC armor plates with PMMA sacrificial layer subjected to impact. In: Advanced Topics inMmechanical Behavior of Materials. IIUM Press, Kuala Lumpur, pp. 93-105. ISBN 9789674181741

Shah, Qasim Hussain and Abid, Hasan M. and Rosli, Adib (2011) Finite element to predict damage of a polycarbonate armor plate subjected to impact. In: Advanced Topics in Mechanical Behavior of Materials. IIUM Press, Kuala Lumpur, pp. 112-119. ISBN 9789674181741

Shah, Qasim Hussain and Abid, Hasan M. and Rosli, Adib (2011) Numerical analysis on materials energy absorbing capability under gravity loading impact. In: Advanced Topics in Mechanical Behavior of Materials. IIUM Press, Kuala Lumpur, pp. 134-140. ISBN 9789674181741

Shah, Qasim Hussain and Abid, Hasan M. and Rosli, Adib (2011) Numerical assessment of liquid filled container subjected to free fall on rigid steel plate. In: Advanced Topics in Mechanical Behavior of Materials. IIUM Press, Kuala Lumpur, pp. 141-147. ISBN 9789674181741

Shah, Qasim Hussain and Abid, Hasan M. and Rosli, Adib (2011) Pipe whip impact. In: Advanced Topics in Mechanical Behavior of Materials. IIUM Press, Kuala Lumpur, pp. 61-65. ISBN 9789674181741

Shah, Qasim Hussain and M. Abid, Hasan and Rosli, Abid (2011) Simulation results of empty and water filled cylindrical shell buckling. In: Advanced Topics in Mechanical Behavior of Materials. IIUM Press, Kuala Lumpur, pp. 35-40. ISBN 9789674181741

Shah, Qasim Hussain and Abid, Hasan M. and Rosli, Adib (2011) Simulation results of pipe whip impact at 55° angle. In: Advanced Topics in Mechanical Behavior of Materials. IIUM Press, Kuala Lumpur, pp. 82-86. ISBN 9789674181741

Shah, Qasim Hussain and Abid, Hasan M. and Rosli, Adib (2011) Simulation results of pipe whip impact at 90° angle. In: Advanced Topics in Mechanical Behavior of Materials. IIUM Press, Kuala Lumpur, pp. 87-92. ISBN 9789674181741

Shah, Qasim Hussain and M. Abid, Hasan and Rosli, Abid (2011) Simulation setup of empty and water filled cylindrical shell buckling. In: Advanced Topics in Mechanical Behavior of Materials. IIUM Press, Kuala Lumpur, pp. 30-34. ISBN 9789674181741

Shah, Qasim Hussain and Abid, Hasan M. and Rosli, Adib (2011) Simulation setup of pipe whip impact. In: Advanced Topics in Mechanical Behavior of Materials. IIUM Press, Kuala Lumpur, pp. 77-81. ISBN 9789674181741

Proceeding Paper

Shaik Dawood, Mohd. Sultan Ibrahim and Ahmad Ghazilan, Ahmad Luqman and Shah, Qasim Hussain (2017) Finite element analysis of a composite crash box subjected to low velocity impact. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering, ICMAAE 2016, 3 April 2017, Kulliyyah of Engineering, International Islamic University Malaysia (IIUM)Kuala Lumpur; Malaysia.

Abdullah, Kassim Abdulrahman and Venkatason, Kausalyah and Shasthri, Sevaguru and Idres, Moumen and Shah, Qasim Hussain (2014) Development and optimization of a vehicle front-end geometry model for improved pedestrian safety. In: International Conference on Automotive and Vehicle Technologies (AVTECH '14), 16-18 October 2014, Yildiz Technical University, Istanbul, Turkey.

Shasthri, Sevaguru and Venkatason, Kausalyah and Shah, Qasim Hussain and Abdullah, Kassim Abdulrahman and Idres, Moumen and Wong, Sha Voon (2014) Response surface approach for sensitivity study of neck forces in restrained child occupant during side-impact crash. In: 3rd International Conference on Materials Engineering and Automatic Control, ICMEAC 2014, 17 May 2014 through 18 May 2014, Tianjin; China.

Adebisi, Adetayo A. and Maleque, Md. Abdul and Shah, Qasim Hussain (2011) Surface temperature distribution in a composite brake rotor. In: Regional Tribology Conference 2011, 22-24 November 2011, Langkawi.

Muyibi, Suleyman Aremu and Yusof, Faridah and Al-Khatib, Ma'an Fahmi Rashid and Shah, Qasim Hussain and Olalekan, Salawudeen Taofeeq (2011) Optimization of process parameters for the production of polypropylene ternary nanocomposites. In: 2nd International Conference on Biotechnology Engineering (ICBioE 2011), 17-19 May 2011, The Legend Hotel, Kuala Lumpur.

Shah, Qasim Hussain and ., Hanis Naily and ., Nur Syuhada (2011) Effect of tapered angle of a conical nose indenter on the energy absorbing variation of a copper pipe subjected to axial crushing. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE' 11), 17-19 May,2011, Kuala Lumpur, Malaysia. (Unpublished)

Abid, Hasan M. and Shah, Qasim Hussain and Faris, Waleed Fekry (2011) The structural integrity assessment of a partially filled tank pertaining to liquid sloshing upon sudden brake applications. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE' 11), 17-19 May, 2011, Kuala Lumpur, Malaysia. (Unpublished)

Olalekan, Salawudeen Taofeeq and Muyibi, Suleyman Aremu and Al-Khatib, Ma'an Fahmi Rashid and Yusof, Faridah and Shah, Qasim Hussain and Qudsieh, Isam Y. (2010) Development of ternary nanocomposite for civil constraction and fabrication of process vessels. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010), 26 - 27 January 2010, Kuala Lumpur.

Olalekan, Salawudeen Taofeeq and Muyibi, Suleyman Aremu and Yusof, Faridah and Al-Khatib, Ma'an Fahmi Rashid and Shah, Qasim Hussain and Qudseih, Isam Y. (2009) Surface characteristics of nanoclay modified with different alkylamonium ions. In: International Journal of Arts & Sciences Conference, 1-4th June 2009, Las Vegas.

Monograph

Topa, Ameen and Shah, Qasim Hussain (2015) A study of investigate and eliminate the crack-like flaws in bulk metal forming processes. Project Report. IIUM Press, Kuala Lumpur. (Unpublished)

Shah, Qasim Hussain (2012) Effect of steel, cooper, and lead projectile impact on the damage process of brittle materials. Research Report. s.n, Kuala Lumpur. (Unpublished)

Shah, Qasim Hussain (2012) The structural integrity assessment of a liquid filled tank and the carrier vehicle during transportation, accident fall, and upon sudden brake application. Research Report. s.n, Kuala Lumpur. (Unpublished)