Items where Author is "Shaffiar, Norhashimah"

Article

Mohd Asri, Nurul Anissa and Abdul Hamid, Abd. Malek and Shaffiar, Norhashimah and Sukindar, Nor Aiman and Syed Shaharuddin, Sharifah Imihezri and Hassan, Farid Syazwan (2022) Application of house of quality in the conceptual design of batik wax extruder and printer. IIUM Engineering Journal, 23 (1). pp. 1-23. ISSN 1511-788X E-ISSN 2289-7860

Othman, Maizatulnisa and Buys, Yose Fachmi and Shaffiar, Norhashimah and Jimat, Dzun Noraini and Syed Shaharuddin, Sharifah Imihezri (2021) Characterisation and production of Poly (Lactic/Acid)/poly (Ethylene Glycol) microfiber via melt drawn spinning process. IIUM Engineering Journal, 22 (1). pp. 201-212. ISSN 1511-788X E-ISSN 2289-7860

Mohd Akhir, Nur atiqah and Othman, Maizatulnisa and Fachmi Buys, Yose and Shaffiar, Norhashimah and Jimat, Dzun Noraini and Syed Shaharuddin, Sharifah Imihezri (2021) Characterization and melt spinning of poly (lactic acid)/poly (ethylene glycol) blends. IIUM Engineering Journal, 22 (1). pp. 201-212. ISSN 1511-758X E-ISSN 2289-7860

Mohamed Haneef, Intan Najwa Humaira and Buys, Yose Fachmi and Shaffiar, Norhashimah and Haris, Nurul Assadiqah and Abdul Hamid, Abdul Malek and Syed Shaharuddin, Sharifah Imihezri (2020) Mechanical, morphological, thermal properties and hydrolytic degradation behavior of polylactic acid/polypropylene carbonate blends prepared by solvent casting. Polymer Engineering and Science, 60 (11). pp. 2876-2886. ISSN 0032-3888 E-ISSN 1548-2634

Syed Shaharuddin, Sharifah Imihezri and Fauzan, Amirul Akmal and Mohamad Jazi, Mohamad Faris Izzudin and Mohd Akhir, Nur Atiqah and Othman, Maizatulnisa and Muhamad Khairussaleh, Nor Khairushima and Shaffiar, Norhashimah and Hassan, Zaimah (2020) Effect of spinning parameters on PLA/PPC/curcumin microfiber diameter: an investigation via response surface methodology. IIUM Engineering Journal, 21 (2). pp. 197-211. ISSN 1511-788X E-ISSN 2289-7860

Syed Shaharuddin, Sharifah Imihezri and Mukhtar, Abdul Rahman and Mohd. Akhir, Nur Atiqah and Shaffiar, Norhashimah and Othman, Maizatulnisa (2019) Experimental and finite element analysis of solvent cast poly (lactic acid) thin film blends. IIUM Engineering Journal, 20 (2). pp. 197-210. ISSN 1511-758X E-ISSN 2289-7860

Mohamed Haneef, Intan Najwa Humaira and Shaffiar, Norhashimah and Buys, Yose Fachmi and Abdul Hamid, Abdul Malek (2019) Finite element analysis (FEA) of polylactic cid/polypropylene carbonate (PLA/PPC) blends fixation plate for craniomaxillofacial surgery. International Journal of Structural Integrity, 10 (5). pp. 678-691. ISSN 1757-9864

Mohd Zamri, Muhamad Zul Asraf and Adnan, Ammar and Radin Umar, Radin Zaid and Samuel, Siby and Shaffiar, Norhashimah and Abdul Hamid, Abd. Malek (2018) Graphical vs. nongraphical displays: which one is the best labeling system for laboratory searching task? Human Factors and Ergonomics Journal, 3 (1). pp. 26-33. E-ISSN 2590-3750

Adnan, Ammar and H., Hanafi and Radin Umar, Radin Zaid and S., Samuel and Shaffiar, Norhashimah and Abdul Hamid, Abd. Malek and Ani, Mohd Hanafi (2018) Effect of hatched marking length on entering position among motorcyclists during merging in expressway. Science Intaernational (Lahore), 30 (3 (May-June)). pp. 451-454. ISSN ISSN 1013-5316

Ammar, Adnan and H., Ismail and Radin Umar, Radin Zaid and S., Samuel and Shaffiar, Norhashimah and Mohd Hanafi, Ani and Abdul Hamid, Abd. Malek (2018) Relationship between merging lane length and motorcyclist’s head check behavior during merging in expressway. Sci.Int.(Lahore), 30 (3). pp. 461-466. ISSN 1013-5316

Shaffiar, Norhashimah and Hasnan, M.A. and Anuar, Hazleen and Al Hazza, Muataz Hazza Faizi (2015) Finite element analysis of HDPE/EPR-CNT nanocomposite under tensile loading. Advanced Materials Research, 1115. pp. 410-413. ISSN 1022-6680

Al Hazza, Muataz Hazza Faizi and Adesta, Erry Yulian Triblas and Hassan, Muhammad Hasibul and Shaffiar, Norhashimah (2015) Energy cost optimization in high speed hard turning using simulated annealing algorithm. Advanced Materials Research, 1115. pp. 104-108. ISSN 1022-6680

Shaffiar, Norhashimah and Abdul Halim, Mohamad Khairi and Anuar, Hazleen and Majid, M. A. H. A. (2015) Finite element analysis of tensile test for HDPE/EPR-MMT nanocomposite. Advanced Materials Research, 1115. pp. 414-417. ISSN 1022-6680

Khalid, Muhammad Ilham and Anuar, Hazleen and Shaffiar, Norhashimah and Yaacob, Iskandar Idris and Mohd. Salit, Sapuan (2015) Matrix cracking in reinforced polymer nanocomposites: a review. Journal of Advanced Review on Scientific Research, 11 (1). pp. 13-36. ISSN 2289-7887

Al Hazza, Muataz Hazza Faizi and Adesta, Erry Yulian Triblas and Shaffiar, Norhashimah and Seder, Amin M. F. and Riza, Muhammad (2015) Multi objective optimisation for high speed end milling using simulated annealing algorithm. Advanced Materials Research, 1115. pp. 113-116. ISSN 1022-6680

Al Hazza, Muataz Hazza Faizi and Adesta, Erry Yulian Triblas and Hassan, Muhammad Hasibul and Shaffiar, Norhashimah (2014) Surface roughness modeling in high speed hard turning using regression analysis. International Review of Mechanical Engineering, 8 (2). pp. 431-436. ISSN 1970-8734

Prawoto, Yunan and Djuansjah, Joy Rizki Pangestu and Shaffiar, Norhashimah (2012) Re-visiting the ‘rule of mixture’ used in materials with multiple constituting phases: A technical note on morphological considerations in austenite case study. Computational Materials Science, 65. pp. 528-535. ISSN 0927-0256

Shaffiar, Norhashimah and Laib, Z. B. and Tam, M. N. (2011) Damage mechanics model for solder/intermetallics interface fracture process in solder joints. Key Engineering Materials, 462-63. pp. 1409-1414. ISSN 1013-9826

Khan, Ahsan Ali and Mohd Ali , Munira and Shaffiar, Norhashimah (2006) Relationship of surface roughness with current and voltage during wire EDM. Journal of Applied Sciences, 6 (10). pp. 2317-2320. ISSN 1812-5662 (O), 1812-5654 (P)

Book

Tamin, M.N. and Shaffiar, Norhashimah (2014) Solder joint reliability assessment: finite element simulation methodology. Advanced Structured Materials Series, 37 . Springer International Publishing, Switzerland. ISBN 978-3-319-00091-6, 978-3-319-00092-3 (eBook)

Book Chapter

Tamin, M.N. and Shaffiar, Norhashimah and Z., B. Lai and W., K. Loh (2012) Fatigue fracture process of lead-free solder joints in BGA package. In: Recent trends in fracture mechanics. Materials Science and Technologies, Mechanical Engineering Theory and Applications . Nova Science Publishers, pp. 247-268. ISBN 978-1-61470-615-1

Proceeding Paper

Mohd Akhir, Nur Atiqah and Syed Shaharuddin, Sharifah Imihezri and Buys, Yose Fachmi and Othman, Maizatulnisa and Shaffiar, Norhashimah (2019) Characterization of poly (lactic acid) _ poly (ethylene) glycol blends prepared for melt drawn spinning process. In: 6th International Conference on Recent Advances in Materials, Minerals and Environment (RAMM) 2019, 27th-29th November 2018, Penang.

Mohamed Haneef, Intan Najwa Humaira and Shaffiar, Norhashimah and Buys, Yose Fachmi and Abdul Hamid, Abd. Malek and Syed Shaharuddin, Sharifah Imihezri (2018) Morphologies and mechanical properties of polylactic acid / polypropylene carbonate (PLA/PPC) blends by solvent casting method. In: International Conference Biotechnology Engineering, ICBioE ‘18 September 19-20, 2018,, 19-20 September 2018, Kuala Lumpur, Malaysia.

Roslan, Muhamad Fahmi Mohd and Shaffiar, Norhashimah and Muhamad Khairussaleh, Nor Khairusshima and Syed Shaharuddin, Sharifah Imihezri (2018) Finite element analysis on deformation of stretchable electronic interconnect substrate using polydimethylsiloxanes (PDMS). In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8 - 9 August 2017, Gombak, Kuala Lumpur.

Haneef, I.N.H.M. and Buys, Yose Fachmi and Shaffiar, Norhashimah and Syed Shaharuddin, Sharifah Imihezri and Muhamad Khairussaleh, Nor Khairusshima (2018) Miscibility, mechanical, and thermal properties of polylactic acid/polypropylene carbonate (PLA/PPC) blends prepared by melt-mixing method. In: 6th International Conference on Recent Advances in Materials, Minerals & Environment (RAMM 2018), 27th-29th November 2018, Penang, Malaysia.

Muhamad Khairussaleh, Nor Khairusshima and Zakwan, Muhammad Hafiz and Mokhtar, Suhaily and Shaffiar, Norhashimah and Syed Shaharuddin, Sharifah Imihezri (2018) The optimization study on the tool wear of carbide cutting tool during milling Carbon Fibre Reinforced (CFRP) using Response Surface Methodology (RSM). In: International Conference on Advances in Manufacturing and Materials Engineering 2017 (ICAMME17), 8th-9th August 2017, Kuala Lumpur, Malaysia.

Shaffiar, Norhashimah and Yamin, A.F.M. and Loh, W.K. and Tamin, M.N. (2012) Fatigue failure processes in pb-free solder joints using continuum damage and cohesive zone models. In: Proceedings of the 2012 IEEE 14th Electronics Packaging Technology Conference, EPTC 2012, 5th-7th Dec 2012 , Singapore.

Prawoto, Yunan and Djuansjah, J.R.P. and Shaffiar, Norhashimah (2012) 3D modeling of austenite based on real microstructure. In: 4th International Conference on Computational Methods (ICCM2012), 25th-28th Nov. 2012, Crown Plaza Surfers Paradise, Gold Coast, Australia. (Unpublished)

Yamin, A.F.M. and Shaffiar, Norhashimah and Loh, W.K. and Tamin, M.N. (2011) Damage progression in BGA solder joints during board-level drop test. In: 13th Electronics Packaging Technology Conference (EPTC 2011), 7th - 9th December 2011 , Singapore.

Shaffiar, Norhashimah and Loh, W.K. and Kamsah, N. and Tamin, M.N. (2010) Continuum damage evolution in pb-free solder joint under shear fatigue loadings. In: 12th Electronics Packaging Technology Conference, 8th - 10th December 2010 , Singapore .

Shaffiar, Norhashimah and Loh, W.K. and Kamsah, N. (2010) Progressive damage in Sn-4Ag-0.5Cu solder joints during flexural fatigue of a BGA package. In: 34th International Electronics Manufacturing Technology Conference (IEMT 2010), 30th - 2nd November 2010 , Melaka.