Items where Author is "Mohd Zaki, Hafizah Hanim"

Article

Mahmud, Mudrikah Sofia and Mohd Daud, Farah Diana and Sarifuddin, Norshahida and Mohd Zaki, Hafizah Hanim and Nordin, Norhuda Hidayah and Mohammad, Nur Farahiyah (2024) Partial replacement of silica nanoparticles in cement paste for CO2 regeneration capture application. IIUM Engineering Journal, 25 (2). pp. 299-308. ISSN 1511-788X E-ISSN 2289-7860

Parveez, Bisma and Jamal, Nur Ayuni and Maleque, Md. Abdul and Ahmad Azhar, Ahmad Zahirani and Mohd Zaki, Hafizah Hanim and Aabid, Abdul and Baig, Muneer (2023) Improvement in effectiveness of diamond in strengthening the porous aluminium composite. Journal of Materials Research and Technology, 25. pp. 25-37. ISSN 2238-7854

Mahmud, Mudrikah Sofia and Mohd Daud, Farah Diana and Sarifuddin, Norshahida and Mohd Zaki, Hafizah Hanim and Nordin, Norhuda Hidayah and Mohammad, Nur Farahiyah (2022) Size reduction via planetary milling and acid leaching effect on rice husk ash-derived nano-silica. Materials Today Proceeding, 66. pp. 2786-2790. E-ISSN 2214-7853

Ahmad Shahrim, Nur'Aishah and Sarifuddin, Norshahida and Ahmad Azhar, Ahmad Zahirani and Mohd Zaki, Hafizah Hanim (2022) Biodegradation of mango seed starch films in soil. IIUM Engineering Journal, 23 (1). pp. 258-267. ISSN 1511-788X E-ISSN 2289-7860 (In Press)

Abd Kadir, Nur Amanina and Mohd Zaki, Hafizah Hanim and Abdullah, Jamaluddin and Mohd Daud, Farah Diana and Sarifuddin, Norshahida (2022) Porous NiTi shape memory alloy fabricated via powder metallurgy technique using pore forming agent. Key Engineering Materials, 908. pp. 119-124. ISSN 1662-9795

Mahmud, Mudrikah Sofia and Mohd Daud, Farah Diana and Sarifuddin, Norshahida and Mohd Zaki, Hafizah Hanim and Nordin, Norhuda Hidayah and Mohammad, Nur Farahiyah (2022) High purity nano-silica from rice husk ash (RHA) via chemical methodas additive/stabilizing agent for CO2 capture application. Key Engineering Materials, 908. pp. 373-378. ISSN 1013-9826 E-ISSN 1662-9795

Mohamad Badari, Siti Norbahiyah and Sarifuddin, Norshahida and Mohd Ali, Afifah and Hamdan Shahruhil, Nurul Atikah and Mohd Daud, Farah Diana and Mohd Zaki, Hafizah Hanim (2022) Prediction and optimization on tribological behaviour of kenaf/carbon fiber reinforced epoxy matrix hybrid composites. Key Engineering Materials, 908. pp. 3-8. ISSN 1662-9795

Sarifuddin, Norshahida and Ahmad, Zuraida and Ahmad Azhar, Ahmad Zahirani and Mohd Zaki, Hafizah Hanim and Azman, Amelia Wong and Nordin, Norhuda Hidayah (2021) Modeling humanizing education through newly reviewed materials engineering curriculum. IIUM Journal of Education Studies, 9 (3). pp. 63-79. ISSN 2289-8085

Mohd Daud, Farah Diana and Kosen, Nur Asyikin and Mahmud, Mudrikah Sofia and Sarifuddin, Norshahida and Mohd Zaki, Hafizah Hanim (2021) Preparation of CaO-SiO2 adsorbent for potential CO2 capture via dry mixing method. Materials Science Forum, 1025. pp. 343-348. ISSN 0255-5476 E-ISSN 1662-9752

Mohd Daud, Farah Diana and Mohamad Azir, Muhammad Mirza and Mahmud, Mudrikah Sofia and Sarifuddin, Norshahida and Mohd Zaki, Hafizah Hanim (2021) Preparatiion of CaO-based pellet using rice husk ash via granulation method for potential CO2 capture. IIUM Engineering Journal, 22 (1). ISSN 1511-788X E-ISSN 2289-7860

Mohd Zaki, Hafizah Hanim and Mohd Sobri, Nur Azemuzahir and Abdullah, Jamaluddin and Sarifuddin, Norshahida and Mohd Daud, Farah Diana (2020) Characterization of NiTi shape memory alloy sintered at different temperatures in reducing environment. Materials Science Forum, 1010. pp. 632-637. ISSN 1662-9752

Mohd Daud, Farah Diana and Mohamad Azir, Muhammad Mirza and Mahmud, Mudrikah Sofia and Sarifuddin, Norshahida and Mohd Zaki, Hafizah Hanim (2020) The preparation of CaO-Based pellet using rice husk ash via f=granulation method for potential CO2 capture. IIUM Engineering Journal, 22 (1). pp. 234-244. ISSN 1511-788X E-ISSN 2289-7860

Ahmad Shahrim, Nur’Aishah Ahmad and Sarifuddin, Norshahida and Mohd Zaki, Hafizah Hanim and Ahmad Azhar, Ahmad Zahirani (2018) The effects of glycerol addition to the mechanical properties of thermoplastic films based on jackfruit seed starch [Kesan penambahan gliserol pada sifat mekanik filem thermoplastik berdasarkan kanji biji nangka]. Malaysian Journal of Analytical Sciences, 22 (5). pp. 892-898. ISSN 1394-2506

Mohd Zaki, Hafizah Hanim and Mohamad Sholihin, Mohamad Hanis and Abdullah, Jamaluddin and Sarifuddin, Norshahida (2018) Comparison studies on phase formation and transformation behavior between Ni-Ti and Ni-TiH2 synthesized via solid state sintering. International Journal of Current Science, Engineering & Technology, 1 (special issue 1). pp. 464-470. ISSN 2581-4311 E-ISSN 2581-4311

Sarifuddin, Norshahida and Shaari, Mohammad Anuar Zaki and Ahmad Shahrim, Aishah and Ahmad Azhar, Ahmad Zahirani and Mohd Zaki, Hafizah Hanim (2018) Effect of banana peel fiber as reinforcement in low density polyethylene/durian seed starch blends. International Journal of Current Research in Science & Technology, Special issue. pp. 191-196. E-ISSN 2581-4311

Mohd Zaki, Hafizah Hanim and Abdullah, Jamaluddin (2016) The role of CaH2 in preventing oxidation for the production of single-phase NiTi alloy in solid state. Journal of Alloys and Compounds, 655. pp. 364-371. ISSN 0925-8388

Mohd Zaki, Hafizah Hanim and Abdullah, Jamaluddin (2015) A study of CaH2 effectiveness as oxidation prevention in solid state sintering of single phase NiTi alloy. Research Journal of Applied Sciences, 10 (1). pp. 28-32. ISSN 1815-932X E-ISSN 1993-6079

Mohd Zaki, Hafizah Hanim and Abdullah, Jamaluddin (2014) Comparison studies on solid state diffusion of Ni–Ti and Ni–TiH2 under CaH2 reducing environment. Materials Letters, 121. pp. 36-39. ISSN 0167-577X

Book Chapter

Mohd Daud, Farah Diana and Ahmad, Nurul Amirah Izzati and Mahmud, Mudrikah Asif and Sarifuddin, Norshahida and Mohd Zaki, Hafizah Hanim (2020) Two-step synthesis of ca-based MgO hybrid adsorbent for pontential CO2 capturing application. In: Materials Science Forum. Trans Tech Publications Ltd, Kuantan, Pahang, pp. 369-374. ISBN 978-303571664-1

Proceeding Paper

Mahmud, Mudrikah Sofia and Aadnan, Aina Fadzleen and Mohd Daud, Farah Diana and Sarifuddin, Norshahida and Mohd Zaki, Hafizah Hanim and Nordin, Norhuda Hidayah and Mohammad, Nur Farahiyah (2023) Cement-based with partial replacement of nano-silica for improvement in compressive strength. In: 5th International Conference on Advances in Manufacturing and Materials Engineering (ICAMME2022), 9th - 10th August 2022, Kuala Lumpur, Malaysia.

Parveez, Bisma and Jamal, Nur Ayuni and Mohamad Kadri, Syazwan and Ahmad Azhar, Ahmad Zahirani and Mohd Zaki, Hafizah Hanim (2023) Microstructure and mechanical properties of porous aluminium composites reinforced with diamond particles. In: 5th International Conference on Advances in Manufacturing and Materials Engineering (ICAMME), 13-14 August 2022, Kuala Lumpur.

Mohd Zaki, Hafizah Hanim and Abd Kadir, Nur Amanina and Jamal, Nur Ayuni and Md. Abdul, Maleque and Mohd Daud, Farah Diana and Sarifuddin, Norshahida and Abdullah, Jamaluddin (2023) Effect of pore forming agent on phase transformation behavior of porous NiTi shape memory alloy. In: Proceeding of 5th International Conference on Advances in Manufacturing and Materials Engineering ICAMME 2022, 9—10 August, Kuala Lumpur, Malaysia, 9-10 August 2022, Kuala Lumpur, Malaysia.

Abd Kadir, Nur Amanina and Mohd Zaki, Hafizah Hanim and Abd Samad, Ikhmal Hazrith and Mohd Daud, Farah Diana and Sarifuddin, Norshahida and Abdullah, Jamaluddin (2023) Tailoring compressive properties of sintered porous NiTi Alloy for biomedical implant through pore forming agent. In: 11th International Symposium on Applied Engineering and Sciences (SAES2023), 20th - 21st November 2023, Serdang, Selangor, Malaysia.

Zakaria, Muhammad Izwan and Mohd Zaki, Hafizah Hanim and Abdul Hamid, Abd. Malek and Sutjipto, Agus Geter Edy and Ani, Mohd. Hanafi (2022) Assessment of corrosion on buried metallic pipeline induced by AC interference below high transmission line. In: 7th International Corrosion Prevention Symposium for Research Scholars, CORSYM 2021, 17th November 2021, UKM and NACE International Founding Malaysia Section.

Mohd Zaki, Hafizah Hanim and Mohd Sobri, Nur Azemuzahir and Abdullah, Jamaluddin and Sarifuddin, Norshahida and Mohd Daud, Farah Diana (2020) Characterization of NITI shape memory alloy sintered at different temperatures in reducing environment. In: 3rd International Conference on Advanced Materials Characterization Techniques, AMCT 2019, 23 - 24 July 2019, Kangar; Malaysia.

Ahmad Shahrim, Nur’Aishah Ahmad and Sarifuddin, Norshahida and Mohd Zaki, Hafizah Hanim and Ahmad Azhar, Ahmad Zahirani (2020) Estimating suitable starch extraction from mango seeds using analytical hierarchy process (AHP) method. In: 3rd International Conference on Advanced Materials Characterization Techniques (AMCT 2019), 23rd-24th July 2019, Kangar, Perlis.

Mohd Daud, Farah Diana and M.Azmy, Nur Aishah and Mahmud, Mudrikah Sofia and Sarifuddin, Norshahida and Mohd Zaki, Hafizah Hanim (2020) Preparation of nanosilica powder using rice husk via precipitation method. In: 3rd International Conference on Advanced Materials Characterization Techniques, AMCT 2019, 23 - 24 July 2019, Kangar; Malaysia.

Maleque, Md. Abdul and Halim, Zahurin and Ahmad Azhar, Ahmad Zahirani and Mohd Zaki, Hafizah Hanim and A.R., Nur Farina and Parveez, Bisma (2019) Sustainable lightweight composite materials. In: Tech Plan Demo Day in Malaysia 2019, 20 July 2019, SME Corporation, KL Sentral, KL. (Unpublished)

Nor Hairin, Assayidatul Laila and Idris, Mohd Fitri and Othman, Raihan and Mohd Daud, Farah Diana and Rozhan, Alya Naili and Mohd Zaki, Hafizah Hanim (2019) Effect of acceptor impurity (Cu and Al) in Zn4Sb3 thermoelectric materials via hotisostatic pressing (HIP) method. In: Materials characterization using x-rays and related techniques, 18th-19th August 2018, Kota Bharu Kelantan.

Mohamad Sholihin, Mohamad Hanis and Mohd Zaki, Hafizah Hanim and Sarifuddin, Norshahida and Nor Hairin, Assayidatul Laila (2019) Effect of annealing temperatures on surface oxidation of Ti-50.8 at% Ni shape memory alloy. In: International Conference on X-Rays and Related Techniques in Research and Industry, ICXRI 2018, 18th-19th August, 2018, Grand Riverview Hotel, Kota Bharu.

Mohd Zaki, Hafizah Hanim and Bahrudin, Nik Amnani and Abdullah, Jamaluddin and Sarifuddin, Norshahida (2018) Effect of different reducing agents on phase formation and transformation behaviour of Ni-Ti shape memory alloy. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017), 8th–9th August 2017, Kuala Lumpur, Malaysia.

Copyright

Samat, Noorasikin and Mohd Zaki, Hafizah Hanim and Manshor, Hanisah and Abd Malek, Mohamad Ashraff Danial and Ramli, Fatin Umaidah (2020) AMSERU. [Copyright] (Unpublished)