IIUM Repository

Items where Author is "Mohd Ali, Afifah "

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Item Type | No Grouping
Number of items: 17.

Article

Ahmad Azhar, Ahmad Zahirani and Mohamad Shawal, Siti Hajar and Manshor, Hanisah and Mohd Ali, Afifah and Rejab, Nik Akmar and Chan Abdullah, Ezzat and Ahmad, Zainal Arifin (2019) The effects of CeO2 addition on the physical and microstructural properties of ZTA-TiO2 ceramics composite. Journal of Alloys and Compounds, 773. pp. 27-33. ISSN 0925-8388 E-ISSN 0925-8388

Mohd Ali, Afifah and Janal, Nurul Nabihah and Hamidon, Nor Ezzati and Ahmad Azhar, Ahmad Zahirani and Mokhtar, Suhaily and Bahar, Rubina and Ahmad, Zainal Arifin (2018) The relationship of cutting chip type, length and thickness to wear of Zirconia Toughened Alumina Added with Magnesium Oxide (ZTA-MgO) cutting tool. International Journal of Current Science, Engineering & Technology, 1 (Special Issue 1). pp. 452-457. ISSN 2581-4311

Ahmad Azhar, Ahmad Zahirani and Kahlib, Nor Amyra Zulianey and Manshor, Hanisah and Wee, Sing Yeo and Mohd Ali, Afifah and Rejab, Nik Akmar and Ahmad, Zainal Arifin (2018) Effect of single walled carbon nanotube addition to the physical properties of monolithic alumina. International Journal of Current Science, Engineering & Technology, 1 (Special Issue 1). pp. 585-590. E-ISSN 2581-4311

Mohd Ali, Afifah and Ahmad Azhar, Ahmad Zahirani and Abdullah, Norazharuddin Shah and Ratnam, Mani Maran and Ahmad, Zainal Arifin (2017) Tetragonal and monoclinic phase transformation of ZTA-MgO ceramic cutting tool by machining process. Materials Science Forum, 888. pp. 108-111. ISSN 1662-9752

Mohd Ali, Afifah and Ahmad Azhar, Ahmad Zahirani and Ratnam, Mani Maran and Ahmad, Zainal Arifin (2015) Wear analysis of ZTA-Mgo ceramic cutting inserts on stainless steel 316L machining. Advanced Materials Research, 1087. pp. 101-105. ISSN 1022-6680

Mohd Ali , Afifah and Adesta, Erry Yulian Triblas and Agusman, Delvis and Mohamad Badari, Siti Norbahiyah and Al Hazza, Muataz Hazza Faizi (2011) Development of surface roughness prediction model for high speed end milling of hardened tool steel. Asian Journal of Scientific Research, 4 (3). pp. 255-263. ISSN 1992-1454

Mohd Ali, Afifah and Khan, Ahsan Ali and Mohammad , Yeakub Ali (2011) Effect of process parameters on abrasive contamination during water abrasive jet machining of mild steel. Advanced Materials Research, 264-65. pp. 1015-1020. ISSN 1022-6680

Al Hazza, Muataz Hazza Faizi and Adesta, Erry Yulian Triblas and Mohd Ali, Afifah and Agusman, Delvis and Suprianto, Mohamad Yuhan (2011) Energy cost modeling for high speed hard turning. Journal of Applied Sciences, 11 (14). pp. 2578-2584. ISSN 1812-5662 (O), 1812-5654 (P)

Adesta, Erry Yulian Triblas and Mohd Ali, Afifah and Agusman, Delvis and Muhammad, Riza and Suprianto, Mohamad Yuhan (2010) A study of parameters relationship to backcutting phenomena during high speed end milling of AISI H13. American Journal of Applied Sciences , 7 (10). pp. 1420-1425. ISSN 1554-3641(O), 1546-9239 (P)

Book Chapter

Mohd Ali, Afifah and Adesta, Erry Yulian Triblas (2011) Influence of backcutting phenomena to surface roughness of hardened AISI H13 during high speed end milling process. In: High Speed Cutting: An Approach towards Improved Machining Performance. IIUM Press, Kuala Lumpur, pp. 81-92. ISBN 9789674180232

Conference or Workshop Item

Hamidon, Nor Ezzati and Abdul Molok, Salma and Manshor, Hanisah and Ahmad Azhar, Ahmad Zahirani and Rejab, Nik Akmar and Ahmad, Zainal Arifin and Mohd Ali, Afifah (2019) Hardness and fracture toughness analysis of ZTA–SWCNT ceramic cutting inserts. In: International Conference on X-Rays and Related Techniques in Research and Industry 2018 (IXCRI 2018), 18th-19th August 2018, Kota Bharu, Kelantan.

Ahmad Azhar, Ahmad Zahirani and Mohd Rosli, Muhammad Farhan and Manshor, Hanisah and Mohd Ali, Afifah (2019) The effect of dolomite addition onto the phases and hardness of zirconia toughened alumina. In: International Conference on X-Rays and Related Techniques in Research and Industry 2018, ICXRI 2018, 18 - 19 August 2018, Grand Riverview Hotel Kota Bharu, Kelantan; Malaysia.

Mokhtar, Suhaily and Che Haron, Che Hassan and A. Ghani, Jaharah and Harun, Azmi and Mohd Ali, Afifah and Muhamad Khairussaleh, Nor Khairusshima (2018) Study on drilling induced delamination of woven kenaf fiber reinforced epoxy composite using carbide drills. In: 2018 6th International Conference on Nano and Materials Science (ICNMS 2018), 15th-17th January 2018, Lakeland; United States.

Mokhtar, Suhaily and Che Haron, Che Hassan and A. Ghani, Jaharah and Mohd Ali, Afifah and Mohd Khairussaleh, Nor Khairusshima (2018) Analysis and modeling of delamination factor in drilling of woven kenaf fiber reinforced epoxy using Box Behnken experimental design. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017), 8th–9th August 2017, Kuala Lumpur, Malaysia.

Ahmad Azhar, Ahmad Zahirani and Manshor, Hanisah and Mohd Ali, Afifah (2018) XRD investigation of the effect of MgO additives on ZTA-TiO2 ceramic composites. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8-9 August 2017, International Islamic University Malaysia (IIUM), Gombak Campus, Kuala Lumpur.

Mohd Ali, Afifah and Hamidon, N. E. and Zaki, N. K.M. and Mokhtar, Suhaily and Ahmad Azhar, Ahmad Zahirani and Bahar, Rubina. and Ahmad, Zainal Arifin Azhar (2018) The effect of cutting parameters on the performance of ZTA-MgO cutting tool. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8- 9 August 2017, International Islamic University Malaysia (IIUM), Gombak Campus, Kuala Lumpur.

Mohd Ali, Afifah and Ahmad Azhar, Ahmad Zahirani and Shah Abdullah, Norazharuddin and Ratnam, Mani Maran and Ahmad, Zainal Arifin (2017) Tetragonal and monoclinic phase transformation of ZTA-MgO ceramic cutting tool by machining process. In: International Conference of X-Ray and Related Techniques 2016 (ICXRI 2016), 17th-18th August 2016, Dorsett Hotel, Putrajaya.

This list was generated on Mon Dec 16 06:21:19 2019 +08.