IIUM Repository

Items where Author is "Mohamed Ariff, Tasnim Firdaus"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Item Type | No Grouping
Number of items: 40.

Septiyana, Diah and Abd. Rahman, Mohamed and Mohamed Ariff, Tasnim Firdaus and Sukindar, Nor Aiman and Triblas Adesta, Erry Yulian (2023) Enhancing sustainability index parameter using ANFIS computational intelligence model. IIUM Engineering Journal, 24 (2). pp. 258-268. ISSN 1511-788X E-ISSN 2289-7860

Septiyana, Diah and Abd. Rahman, Mohamed and Mohamed Ariff, Tasnim Firdaus and Sukindar, Nor Aiman and Adesta, Erry Yulian Triblas (2023) ANFIS domestic water consumption model before and during Covid19 pandemic in Tangerang Indonesia. In: 5th International Conference on Advances in Manufacturing and Materials Engineering, ICAMME 2022, 9-10 August 2022, Kuala Lumpur.

Alawbali, Rakan Hatem Abbas and Mohamed Ariff, Tasnim Firdaus (2023) Enhancing the tool life of aluminium oxide (Al2O3) inserts using hybrid microwave energy in dry machining of high strength steel (KRUPP 6582). In: 5th International Conference on Advances in Manufacturing and Materials Engineering, 9th - 10th August 2022, Kuala Lumpur, Malaysia.

Mohamed Ariff, Tasnim Firdaus and Sayadek, Mohd Shahril (2023) Wear analysis of titanium carbonitride in machining high strength steel (KRUPP 6582) using used palm oil as cutting fluid. In: 1st International Conference on Manufacturing Engineering Technology (IConMET 2021), Langkawi Island, Malaysia.

Septiyana, Diah and Abd Rahman, Mohamed and Mohamed Ariff, Tasnim Firdaus and Sukindar, Nor Aiman and Adesta, Erry Yulian Triblas (2023) Enhancing water sustainability index assessment through risk management, IoT, and artificial intelligence in water operation: a review. Water Conservation & Management, 7 (2). pp. 97-106. ISSN 2523-5664 E-ISSN 2523-5672

Yeakub Ali, Mohammad and Ali Khan, Ahsan and Abd Rahman, Mohamed and Mohamed Ariff, Tasnim Firdaus (2019) Noble approach to control vibration using minimum quantity lubrication (MQL) in micro milling. Research Report. UNSPECIFIED. (Unpublished)

Haiyam, F. N. and Hilmy, Irfan and Sulaeman, Erwin and Mohamed Ariff, Tasnim Firdaus and Adesta, Erry Yulian Triblas (2018) Experimental investigation on frequency shifting of imperfect adhesively bonded pipe joints. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017), 8th–9th August 2017, Kuala Lumpur, Malaysia.

Konneh, Mohamed and Bagum, Mst. Nasima and Ali, Mohammad Yeakub and Mohamed Ariff, Tasnim Firdaus (2018) Tool wear mechanisms during cutting of soda lime glass. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017), 8-9 August 2017, Kuala Lumpur, Malaysia.

Perves Bappy, Mohammad Jabed and Bahar, Rubina and Ibrahim, Shaliza and Mohamed Ariff, Tasnim Firdaus (2017) Enhanced freshwater production using finned-plate air gap membrane distillation (AGMD). In: 2016 International Symposium on Civil and Environmental Engineering, ISCEE 2016, 5-6 December 2016, Novotel Melaka,.

Konneh, Mohamed and Bagum, Mst. Nasima and Mohamed Ariff, Tasnim Firdaus and Yeakub Ali, Mohammad (2017) Machinability of soda lime glass in high speed end milling. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017), 8-9 August 2017, Kuala Lumpur, Malaysia.

Mohamed Ariff, Tasnim Firdaus and Zakaria, Zairul Azrul (2015) Enhanced heating mechanism of the electric metal melting furnace in traditional foundry. ARPN Journal of Engineering and Applied Sciences, 10 (1). pp. 9659-9663. ISSN 1819-6608

Hilmy, Irfan and Wahab, M. Abdel and Adesta, Erry Yulian Triblas and Mohamed Ariff, Tasnim Firdaus (2015) Damage detection based on the natural frequency shifting of a clamped rectangular plate model. Journal of Physics: Conference Series, 628. 012034-1. ISSN 1742-6588 (P), 1742-6596 (O)

Bahar, Rubina and Hawlader, Mohammad Nurul Alam and Mohamed Ariff, Tasnim Firdaus (2015) Channeled coolant plate: a new method to enhance freshwater production from an air gap membrane distillation (AGMD) desalination unit. Desalination, 359. pp. 71-81. ISSN 0011-9164

Mohamed Ariff, Tasnim Firdaus and Azmi , Mohamad Asyraf and Bahar, Rubina (2014) Economic analysis of using e-glass composite wrap repair system for pipelines in Malaysia. Australian Journal of Basic and Applied Sciences, 8 (15). pp. 241-245. ISSN 1991-8178

Mohamed Ariff, Tasnim Firdaus and Jusoh, Muhd. Fahmi Baihaqi and Parnin , Malek and Azenan, Mohd. Hanif (2014) Improving efficiency and enhancing productivity in transporting fertilizers by using conveyor belt cleaners. Advanced Materials Research, 1082. pp. 505-510. ISSN 1022-6680

Bahar, Rubina and Yahya, Nur Adilah and Mohamed Ariff, Tasnim Firdaus (2014) Design and development of a versatile ice clamping system. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME2014), 23rd-25th September 2014, Kuala Lumpur. (Unpublished)

Bahar, Rubina and Hawlader, Mohammad Nurul Alam and Mohamed Ariff, Tasnim Firdaus (2014) Effect of coolant plate geometry and material in a freshwater production system: an experimental study. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2014), 23th-25th September 2014, Kuala Lumpur. (Unpublished)

Mohamed Ariff, Tasnim Firdaus and Ibrahim, Husna Izzati and Roselley, Noor Sheila and Iqbal, Mohammad and Hilmy, Irfan and -, Suryanto (2014) Enhancing tool life of silicon nitride inserts via hybrid microwave post sintering. Australian Journal of Basic and Applied Sciences, 8 (15). pp. 80-85. ISSN 1991-8178

Mohamed Ariff, Tasnim Firdaus and Firdaus, Muhammad and Norhafiz, Mohd and Iqbal, Mohammad and Hilmy, Irfan (2014) Improved performance in aluminium oxide tool inserts via post sintering using hybrid microwave energy. In: 2nd International Conference on Emerging Trends in Scientific Research, 1-2 November, 2014, Kuala Lumpur.

Mohamed Ariff, Tasnim Firdaus and Kamarudin, Mohd Syahidan and Haron, Mohd Amiruddin (2013) Dry machining of brass using titanium carbonitride (TiCN) coated tool. Applied Mechanics and Materials, 372. pp. 495-500. ISSN 1660-9336

Mohamed Ariff, Tasnim Firdaus and Sofian, Nur Najwa and Che Mat, Nor Hayati (2013) Dry machining of T6061 aluminium alloy using titanium carbonitride (TiCN) coated tools. Advanced Materials Research, 652/54. pp. 2129-2133. ISSN 1022-6680

Mohamed Ariff, Tasnim Firdaus and Paimin, Muhamad Fahmie and Hassan, Abdirahman (2013) Dry machining of T6061 aluminium alloy using titanium nitride (TiN)and titanium carbonitride (TiCN) coated tools. Applied Mechanics and Materials, 284/87. pp. 291-295. ISSN 1660-9336

Mohamed Ariff, Tasnim Firdaus and Shafie, Nurul Syamira and Mahamad Zahir, Zamzahariah (2013) Wear analysis of Silicon Nitride (Si3N4) cutting tool in dry machining of T6061 Aluminium Alloy. Applied Mechanics and Materials, 268-70. pp. 563-567. ISSN 1660-9336

Mohamed Ariff, Tasnim Firdaus and Sabiyah, Mohamad Yazid and Adam, Mohd Amirul and Nor, Mohd Anuar (2012) Eco-friendly machining of T6061 aluminium alloy using titanium carbonitride (TiCN) coated tools. Advanced Materials Research, 576. pp. 675-678. ISSN 1022-6680

Mohamed Ariff, Tasnim Firdaus and Thauri, Shahdura Hammad and Karim, A.N. Mustafizul (2011) Enhancing mechanical and structural properties of TiC inserts using microwave energy. In: 2nd International Conference on Mechanical and Manufacturing Engineering 2011 (ICME2011), 6th-7th June 2011, Putrajaya, Kuala Lumpur.

Thauri, Shahdura Hammad and Mohamed Ariff, Tasnim Firdaus and Karim, A.N. Mustafizul (2011) Study of TiC cutting tool insert using microwave synthesis. Applied Mechanics and Materials, 52-54. pp. 2116-2121. ISSN 1660-9336

Mohamed Ariff, Tasnim Firdaus and Yap, Yee Seng (2011) Application of statistical quality control for quality improvement. In: Design for manufacture : Towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 66-71. ISBN 9789674181598

Mohamed Ariff, Tasnim Firdaus and Ewing, Goey and Kam , Yee Wah (2011) Design of a simple and affordable electric bicycle. In: Design for manufacture: towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 4-9. ISBN 9789674181598

Mohamed Ariff, Tasnim Firdaus and Lau, Ken Tick (2011) Design of bicycle helmet using FEA. In: Design for manufacture: towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 10-17. ISBN 9789674181598

Mohamed Ariff, Tasnim Firdaus (2011) Microwave sintering of ceramic materials. In: Design for manufacture: towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 185-191. ISBN 9789674181598

Mohamed Ariff, Tasnim Firdaus (2011) Microwave sintering of metallic materials. In: Design for manufacture: towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 179-184. ISBN 9789674181598

Mohamed Ariff, Tasnim Firdaus and Law, Siah Yong (2011) Mould design for handphone casing using moldflow. In: Design for manufacture : Towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 18-25. ISBN 9789674181598

Gabbitas, Brian Leslie and Mohamed Ariff, Tasnim Firdaus and Cao, Peng (2010) Synthesis of pewter alloy from tin–copper–antimony powder mixtures by microwave and conventional sintering. Journal of Powder Metallurgy. ISSN 1743-2901 (O), 0032-5899 (P)

Afifah, Ali and Khan, Ahsan Ali and Ali, Mohammad Yeakub (2010) Effect of Process Parameters on Abrasive Contamination During Water Abrasive Jet Machining of Mild Steel. In: UNSPECIFIED.

Ali, Mohammad Yeakub and Mohd Fuad, Nurul Hajar (2010) Fabrication of Silicon Nanopillar Sheet for Cell Culture Dish. In: UNSPECIFIED.

Mohd. Fuad, Nurul Hajar and Ali, Mohammad Yeakub (2010) Investigation of Microholes Produced by Focused Ion Beam Micromachining. In: Materials Processing and Precision Engineering. Series 1 . Department of Manufacturing and Materials,Kulliyyah of Engineering, IIUM, Malaysia, pp. 92-97.

Mohamed Ariff, Tasnim Firdaus and Gabbitas, Brian Leslie and Zhang, Deliang (2009) The effect of copper and antimony on the mechanical properties of pewter alloys made by conventional and microwave powder sintering. In: 4th International Conference on Recent Advances in Materials, Minerals & Environment and 2nd Asian Symposium On Materials & Processing (RAMM & ASMP 2009), 1-3 June 2009, Penang, Malaysia.

Mohamed Ariff, Tasnim Firdaus and Gabbitas, Brian Leslie and Zhang, Deliang (2009) The effect of powder sintering method on the densification and microstructure of pewter alloys. In: Processing, Microstructure and Performance of Materials, 8–9 April 2009, Auckland, New Zealand.

Mohamed Ariff, Tasnim Firdaus (2008) Enhancing mechanical and structural properties of pewter alloy using microwave sintering. In: International Conference on Mechanical and Manufacturing Engineering (ICME 2008), 21-23 May 2008, Johor.

Mohamed Ariff, Tasnim Firdaus and Gabbitas, Brian (2008) Effect of microwave sintering on the mechanical and structural properties of pewter alloy. RJooiSA, Transactions on Material Science, 8 (1). ISSN 0-9703797-5-7

This list was generated on Thu Mar 28 20:39:36 2024 +08.