Items where Author is "Khan, Ahsan Ali"

Mohd Zain, Zakaria and Rashid, Mir Akmam Noor and Khan, Sher Afghan and Khan, Ahsan Ali (2023) Analysis and modeling of surface roughness in powder mix EDM and pure EDM using central composite design. Journal of Advanced Research in Applied Sciences and Engineering Technology, 30 (1). pp. 243-254. ISSN 2462-1943

Mohd Zain, Zakaria and Rashid, Mir Akmam Noor and Khan, Sher Afghan and Khan, Ahsan Ali (2023) MRR and TWR study of powder mix EDM and pure EDM based on response surface methodology. Journal of Advanced Research in Applied Mechanics, 103 (1). pp. 13-26. ISSN 2289-7895

Arifutzzaman, A. and Ismail, Ahmad Faris and Alam, Md. Zahangir and Khan, Ahsan Ali and Aslfattahi, Navid and Saidur, R. (2021) Static and dynamic combined effects on the thermal conductivity of water based Ironoxide Nanofluids: experiments and theories. Smart Science, 9 (2). pp. 133-146. ISSN 2308-0477

Arifutzzaman, A. and Ismail, Ahmad Faris and Alam, Md. Zahangir and Khan, Ahsan Ali and Saidur, Rahman (2021) Effect of exfoliated graphene on thermal conductivity enhancements of graphene-ironoxide hybrid nanofluids: Experimental investigation and effective medium theories. Journal of Nano Research, 67. pp. 97-114. ISSN 1661-9897

Arifutzzaman, A. and Ismail, Ahmad Faris and Alam, Md. Zahangir and Khan, Ahsan Ali and Saidur, Rahman (2020) A systematic study of rheological properties of waterironoxide nanofluids with graphene nanoflakes. In: International Conference on Sustainable Energy and Green Technology 2019, SEGT 2019, 11th - 14th December 2019, Bangkok, Thailand.

Akter, Fargana and Rakhimov, Abdumalik and Khan, Ahsan Ali and Hassan, Torla (2020) Optimization of the regularization of the solution of the plate heat transfer problems. IIUM Engineering Journal, 21 (1). pp. 113-125. ISSN 1511-758X E-ISSN 2289 -7860

Rahat, Arifutzzaman and Ismail, Ahmad Faris and Khan, Ahsan Ali and Alam, Md Zahangir and Rahman, Saidur (2020) Effect of particle loading on the stability of the water based iron-oxide nanofluids. International Journal of Advanced Science and Technology, 29 (1). pp. 1326-1333. ISSN 2005-4238 E-ISSN 2207-6360

Arifutzzaman, Abul and Ismail, Ahmad Faris and Yaacob, Iskandar Idris and Alam, Md Zahangir and Khan, Ahsan Ali (2019) Experimental investigation of concentration yields of liquid phase exfoliated graphene in organic solvent media. In: 4th International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2018), 19th-20th September 2018, Kuala Lumpur, Malaysia.

Arifutzzaman, A. and Ismail, Ahmad Faris and Yaacob, Iskandar Idris and Alam, Md Zahangir and Khan, Ahsan Ali (2019) Stability investigation of water based exfoliated graphene nanofluids. In: 4th International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2018), 19th-20th September 2018, Kuala Lumpur, Malaysia.

Arifutzzaman, A and Ismail, Ahmad Faris and Alam, Md. Zahangir and Khan, Ahsan Ali and Saidur, Rahman (2019) Investigation of extraction yields of exfoliated graphene in deionized water from organic solvents. International Journal of Technology, 10 (6). pp. 1251-1259. ISSN 2086-9614

Alrashidi, Abdullah E. M. F. and Al Hazza, Muataz Hazza Faizi and Khan, Ahsan Ali (2018) The scenario of supply chain management in Kuwait food industry. International Journal of Engineering Materials and Manufacture, 3 (3). pp. 162-170. ISSN 0128-1852

Khan, Ahsan Ali and Mohiuddin, A. K. M. and Abdul Latif, Muhammad Alif (2018) Improvement of MRR and surface roughness during electrical discharge machining (EDM) using aluminum oxide powder mixed dielectric fluid. In: ICAMME 2017: International Conference on Advances in Manufacturing and Materials Engineering 2017, 8-9 Aug 2017, Kuala Lumpur, Malaysia.

Mohiuddin, A. K. M. and Syafie, Ahmad and Khan, Ahsan Ali (2018) Design and analysis of fuel cell stack for automotive use. International Review of Mechanical Engineering (IREME), 12 (6). pp. 540-547. ISSN 1970-8734 E-ISSN 2532-5655

Abdulkareem, Sulaiman and Khan, Ahsan Ali and Konneh, Mohamed (2018) Analysis of microlayer defects of a functionally graded titanium alloy by electrical discharge machining. Engineering and Applied Science Research, 45 (1). pp. 17-22. ISSN 2539-6161 E-ISSN 2539-6218

Mohiuddin, A. K. M. and Basran, Norasyikin and Khan, Ahsan Ali (2018) Modelling and validation of proton exchange membrane fuel cell (PEMFC). In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8-9 Aug 2017, Kulliyyah of Engineering, IIUM, Kuala Lumpur.

Fargana, A and Rakhimov, Abdumalik and Khan, Ahsan Ali and Hassan, Torla (2018) Equiconvergence in summation associated with elliptic polynomial. In: 4th International Conference on Mathematical Applications in Engineering (ICMAE ’17), 8th-9th Aug. 2017, International Islamic University Malaysia (IIUM), Gombak Campus, Kuala Lumpur.

Rahat, Arifutzzaman and Ismail, Ahmad Faris and Yaacob, Iskandar Idris and Khan, Ahsan Ali and Mohammad, Zahangir Alam (2018) Effect of exfoliated graphene defects on thermal conductivity of water based graphene nanofluids. International Journal of Applied Engineering Research, 13 (7). pp. 4871-4877. ISSN 0973-4562 E-ISSN 0973-9769

Khan, Ahsan Ali and Mohiuddin, A. K. M. and Al Hazza, Muataz Hazza Faizi and Norhamzan, Norainnatul Husna (2018) Enhancement of machining performance during electrical discharge machining of stainless steel with carbon nanotube powder added dielectric fluid. International Journal of Applied Engineering Research, 13 (9). pp. 7076-7080. ISSN 0973-4562 E-ISSN 0973-9769

Arifutzzaman, A. K. H. A. Ma and Ismail, Ahmad Faris and Yaacob, Iskandar Idris and Khan, Ahsan Ali and Alam, Md. Zahangir (2018) Experimental investigation and effective medium approximation of thermal conductivity of water based exfoliated Graphene nanofluids. International Journal of Applied Engineering Research, 13 (10). pp. 7477-7487. ISSN 0973-4562

Fargana, A. and Rakhimov, Abdumalik and Khan, Ahsan Ali and Hassan, Torla (2018) Optimization of the regularization of the solution of the plate vibration problem. International Journal of Applied Engineering Research, 13 (8). pp. 6364-6368. E-ISSN 0973-4562

Khan, Ahsan Ali and Muataz Hazza Faizi, Muataz and Mohiuddin, A. K. M. and Abdul Fattah, Nurfatihah and Che Daud, Mohd Radzi (2018) Performance of electrical discharge machining (EDM) with nickel added dielectric fluid. IIUM Engineering Journal, 19 (1). pp. 215-222. ISSN 1511-788X E-ISSN 2289-7860

Khan, Ahsan Ali and Mohiuddin, A. K. M. and Norhamzan, Norainnatul Husna (2018) A comparative study on flank wear of ceramic and Tungsten carbide inserts during high speed machining of stainless steel. International Journal of Applied Engineering Research, 13 (5). pp. 2541-2544. ISSN 0973-4562 E-ISSN 0973-9769

Mohiuddin, A. K. M. and Abdul Jabar, Julia and Khan, Ahsan Ali and Karim, A.N. Mustafizul (2017) Adoption of JMM practices – A key to performance improvement of a local automotive industry. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering, ICMAAE 2016, 25-27 Jul 2016, Kuala Lumpur.

Khan, Ahsan Ali and Mohamad Royani, Nurul Nasuha and Al Hazza, Muataz Hazza Faizi and Che Daud, Mohd Radzi and Mohiuddin, A. K. M. (2017) Improvement of surface quality using silicon carbide powder added dielectric fluid during EDM. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25th-27th July 2016, Kuala Lumpur, Malaysia.

Khan, Ahsan Ali and Abu Bakar, Marina and Al Hazza, Muataz Hazza Faizi and Che Daud, Mohd Radzi and Mohiuddin, A. K. M. (2017) Improving machining performance using alumina powder-added dielectric during electrical discharge machining (EDM). In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25th-27th July 2016, Kuala Lumpur, Malaysia.

Al Hazza, Muataz Hazza Faizi and Ibrahim, Nur Asmawiyah and Adesta, Erry Yulian Triblas and Khan, Ahsan Ali and Abdullah Sidek, 'Atiah (2017) Surface roughness optimization using Taguchi method of high speed end milling for hardened steel D2. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25th-27th July 2016, Kuala Lumpur, Malaysia.

Mohiuddin, A. K. M. and Sabarudin, Mohamad Syabil and Khan, Ahsan Ali and Ihsan, Sany Izan (2017) Design and development of hybrid energy generator (photovoltaics) with solar tracker. IOP Conference Series: Materials Science and Engineering, 184. pp. 1-6. E-ISSN 1757-899X

Al Hazza, Muataz Hazza Faizi and Ibrahim, Nur Asmawiyah and Adesta, Erry Yulian Triblas and Khan, Ahsan Ali and Abdullah Sidek, 'Atiah (2017) Flank wear analysing of high speed end milling for hardened steel D2 using Taguchi method. IOP Conference Series: Materials Science and Engineering, 184. pp. 1-5. ISSN 1757-899X

Mohiuddin, A. K. M. and Amer, Muhammad Yazid and Rahman, Mohammed Ataur and Khan, Ahsan Ali (2017) Investigation of aluminum heat sink design with thermoelectric generator. IOP Conf. Series: Materials Science and Engineering, 184. ISSN 1757-8981 E-ISSN 1757-899X

Ndaliman, Mohammed Baba and Khan, Ahsan Ali and Lafia-Araga, Ruth Anayimi (2017) Electro-discharge machining of Ti-6AI-4V alloy using Cu-TaC compact electrode with urea dielectric: Reactions and their effects on the machined surface. In: 2017 8th International Conference on Mechanical and Intelligent Manufacturing Technologies (ICMIMT), 3rd February-6th February 2017, Cape Town, South Africa.

Fargana, A and Rakhimov, Abdumalik and Khan, Ahsan Ali and Hassan, Torla (2017) Equiconvergence in summation associated with elliptic polinomial. In: Proceedings of the 4th International Conference of Mathematical Applications in Engineering 2017, 8th-9th August 2017, Kuala Lumpur.

Khan, Ahsan Ali and Al Hazza, Muataz Hazza Faizi and Mohiuddin, A. K. M. and Ali, Mohammad Yeakub (2017) Influence of the angle of cut of workpiece on taper and corner roundness during Wire Electrical Discharge Machining (WEDM). International Review of Mechanical Engineering (IREME), 11 (3). pp. 208-212. ISSN 1970-8734 E-ISSN 2532-5655

Abdulkareem, Suleiman and Khan, Ahsan Ali and Shah, Qasim Hussain and Konneh, Mohamed (2017) Temperature distribution in copper electrode during electrical discharge machining process. International Journal of Integrated Engineering, 9 (1). pp. 39-43. ISSN 2229-838X

Al Hazza, Muataz Hazza Faizi and Khan, Ahsan Ali and Yeakub Ali, Mohammad and Hasim, Siti Fatihah and Che Daud, Mohd Radzi (2017) A study on capabilities of different electrode materials during electrical discharge machining (EDM). IIUM Engineering Journal, 18 (2). pp. 189-195. ISSN 1511-788X E-ISSN 2289-7860

Khan, Ahsan Ali and Al Hazza, Muataz Hazza Faizi and Che Daud, Mohd Radzi and Ali , Mohammad Yeakub and Jamingan, Hazira (2016) Analyzing and modeling the influence of workpiece thickness on geometry of slot machining wire EDMs. In: 2015 4th International Conference on Advanced Computer Science Applications and Technologies (ACSAT 2015), 8th-10th Dec. 2015, Kuala Lumpur.

Al Hazza, Muataz Hazza Faizi and Khan, Ahsan Ali and Ali , Mohammad Yeakub (2016) Exploration of EDM assisted CNT in micro machining using statistical approach. In: 2015 4th International Conference on Advanced Computer Science Applications and Technologies (ACSAT 2015), 8th-10th Dec. 2015, Kuala Lumpur.

Khan, Ahsan Ali and Al Hazza, Muataz Hazza Faizi and Adesta, Erry Yulian Triblas and Mohd. Fauzey, Nur Fadhilah (2016) Modeling the effect of CNT concentration in dielectric fluid on EDM performance using neural network. In: 2015 4th International Conference on Advanced Computer Science Applications and Technologies (ACSAT 2015), 8th-10th Dec. 2015, Kuala Lumpur.

Khan, Ahsan Ali and Al Hazza, Muataz Hazza Faizi and Che Daud, Mohd Radzi and Mohamad Kamal, Nor Shahirah (2016) Optimization of surface quality of mild steel machined by wire EDM using simulated annealing algorithm. In: 2015 4th International Conference on Advanced Computer Science Applications and Technologies (ACSAT 2015), 8th-10th Dec. 2015, Kuala Lumpur.

Khan, Ahsan Ali and Wahid Azmi, Nurfarah and Odenan, Mohd Azim and Mohd Zain, Zakaria (2015) Effect of powder concentration on EDM performance during machining mild steel. Advanced Materials Research, 1115. pp. 7-11. ISSN 1662-8985

Khan, Ahsan Ali and Mohammed, Baba Ndaliman and Mohamad, Ummu Atiqah Khairiyah and Sulong, Nurul Farhana and Mohd Zain, Zakaria (2015) Surface quality produced in EDM with tungsten carbide and copper compacted electrodes. Advanced Materials Research, 1115. pp. 24-28. ISSN 1662-8985

Mohammed , Baba Ndaliman and Bala, Katsina Christopher and Khan, Ahsan Ali and Mohammad , Yeakub Ali and Abdullahi, Umma and Abdulmumin , Adebisi Adetayo (2015) The effects of sliding parameters on dry wear characteristics of Ti-6Al-4V alloy. Advanced Materials Research, 1115. pp. 213-216. ISSN 1022-6680

Al Hazza, Muataz Hazza Faizi and Mohammed, Baba Ndaliman and Mohammad, Yeakub Ali and Khan, Ahsan Ali (2015) Analyzing the influence of electrical parameters on EDM process of Ti6Al4V alloy using Adaptive Neuro-fuzzy Inference System (ANFIS). International Review of Mechanical Engineering, 9 (3). pp. 237-241. ISSN 1970-8734

Al Hazza, Muataz Hazza Faizi and Khan, Ahsan Ali and Ali, Mohammad Yeakub (2015) Exploration of EDM assisted CNT in micro machining using statistical approach. In: 4th International Conference on Advanced Computer Science Applications and Technologies, 8-10 December 2015, Kuala Lumpur, Malaysia.

Mohd Zain, Zakaria and Ndaliman, Mohammed Baba and Khan, Ahsan Ali and Ali, Mohammad Yeakub (2014) Improving micro-hardness of stainless steel through powder-mixed electrical discharge machining. Journal of Mechanical Engineering Science. pp. 1-7. ISSN 0954-4062

Al Hazza, Muataz Hazza Faizi and Mohammed , Baba Ndaliman and muhammad, Hasibul hasan and Mohammad , Yeakub Ali and Khan, Ahsan Ali (2013) Modeling the electrical parameters in EDM process of Ti6Al4V alloy using Neural Network method. International Review of Mechanical Engineering, 7 (7). pp. 1464-1470. ISSN 1970-8734

Khan, Ahsan Ali and Ndaliman, Mohammed Baba and Mohammad , Yeakub Ali and Lawal, Sunday Albert and Sulong, Nurul Farhana and Mohamad, Ummu Atiqah Khairiyah (2013) Effect of electrical parameters on performance of Cu-TiC mixed ceramic compact electrode in EDM process. In: 2nd International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2013), 2-4 July 2013, Kuala Lumpur, Malaysia.

Khan, Ahsan Ali and Ndaliman, Mohammed Baba and Mohammad , Yeakub Ali and Al-Falahi, Muath D. and Ibrahim, Haazin A. and Mustapa, Mohad S. (2013) The Effect of EDM with external magnetic field on surface roughness of stainless steel. In: 2nd International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2013), 2-4 July 2013, Kuala Lumpur, Malaysia.

Ndaliman, Mohammed Baba and Khan, Ahsan Ali and Mohammad , Yeakub Ali and M A, Mohammad Hambiyah (2013) Modelling the surface roughness behaviour of an EDMed workpiece with different tool electrodes using DoE. In: 5th International Conference on Mechatronics (ICOM'13), 2 – 4 July 2013, Kuala Lumpur, Malaysia.

Mohammed , Baba Ndaliman and Khan, Ahsan Ali and Mohammad , Yeakub Ali (2013) Influence of dielectric fluids on surface properties of electrical discharge machined titanium alloy. Journal of Engineering Manufacture, 227 (9). pp. 1310-1316. ISSN 2041-2975 (O), 0954-4054 (P)

Ndaliman, Mohammed Baba and Khan, Ahsan Ali and Yeakub Ali , Mohammad (2013) Influence of electrical discharge machining process parameters on surface micro-hardness of titanium alloy. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 227 (3). pp. 460-464.

Ali, Mohammad Yeakub and Mohamed, Abd. Rahman and Khan, Ahsan Ali and Asfana, Banu and Lutfi, M. and Fahmi, M. I. (2013) Empirical modelling of vibration in micro end milling of PMMA. World Applied Sciences Journal , 21 (1). pp. 73-78. ISSN 1818-4952

Sabur, Abdus and Ali, Mohammad Yeakub and Maleque, Md. Abdul and Khan, Ahsan Ali (2013) Investigation of material removal characteristics in EDM of nonconductive ZrO2 ceramic. Procedia Engineering, 56. pp. 696-701. ISSN 1877-7058

Mohammed Baba, Ndaliman and Khan, Ahsan Ali and Mohammad , Yeakub Ali and M A, Mohammad Hambiyah (2013) Modelling the surface roughness behaviour of an EDMed workpiece with different tool electrodes using DoE. IOP Conference Series: Materials Science and Engineering, 53. pp. 1-8. ISSN 1757-8981

Al Hazza, Muataz Hazza Faizi and Ndaliman, Mohammed Baba and Ali, Mohammad Yeakub and Khan, Ahsan Ali (2013) Simulating the electrical and thermal conductivity in EDM die sinking of Cu-TaC compact electrodes using neural network. In: International Conference on Advanced Computer Science Applications and Technologies 2013, 22-24 December 2013, Kuching, Sarawak.

Ndaliman, Mohammed Baba and Al Hazza, Muataz Hazza Faizi and Khan, Ahsan Ali and Yeakub Ali, Mohammad (2012) Development of a new model for predicting EDM properties of Cu-TaC compact electrodes based on artificial neural network method. Australian Journal of Basic and Applied Sciences, 6 (13). pp. 192-199. ISSN 1991-8178

Ndaliman, Mohammed Baba and Khan, Ahsan Ali and Mohammad , Yeakub Ali and Wahid, Zaharah (2012) Determination of influential factors on edmed surface properties using plackett-burman design. In: IIUM Engineering Congress 2012, 3-5 July 2012, Kuala Lumpur, Malaysia.

Mohd. Zain, Zakaria and Ndaliman, Mohammed Baba and Khan, Ahsan Ali and Mohammad , Yeakub Ali (2012) Electro-discharge machining of SUS 304 stainless steel with TaC powder-mixed dielectric. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2012), 3-5 July 2012, Kuala Lumpur, Malaysia. (Unpublished)

Khan, Ahsan Ali and Ndaliman , Mohammed Baba and Ali , Mohammad Yeakub and Mansor, Mas Hafizah and Idrus, Nurul-Ain (2012) Surface modification by EDM using CO-CR sintered powder metallurgy electrod. In: IIUM Engineering Congress 2012, 3 - 5 July 2012, Kuala Lumpur, Malaysia. (Unpublished)

Khan, Ahsan Ali (2012) Surface modification of work material using Powder Metallurgey (P/M) compacted electrodes during Electric Discharge Machining (EDM). UNSPECIFIED. s.n, Kuala Lumpur. (Unpublished)

Ndaliman, Mohammed Baba and Khan, Ahsan Ali and Mohammad , Yeakub Ali and Wahid, Zaharah (2012) Determination of influential factors on EDMed surface properties using Plackett-Burman design. World Applied Sciences Journal (WASJ), 21 (spec ). pp. 88-93. ISSN 1818-4952

Mohd Zain, Zakaria and Mohammed , Baba Ndaliman and Khan, Ahsan Ali and Ali, Mohammad Yeakub (2012) Electro-discharge machining of SUS 304 stainless steel with TaC powder-mixed dielectric. Advanced Materials Research, 576. pp. 72-75. ISSN 1022-6680

Mohammed , Baba Ndaliman and Khan, Ahsan Ali and Ali, Mohammad Yeakub (2012) Formation of nitrides and carbides on titanium alloy surface through EDM. Advanced Materials Research, 576. pp. 7-10. ISSN 1022-6680

Khan, Ahsan Ali and Mohammed , Baba Ndaliman and Md. Soot, Hamizah and Ishak, Norazah (2012) Influence of thermal conductivity cf electrodes on EDM process parameters. Australian Journal of Basic and Applied Sciences, 6 (9). pp. 337-345. ISSN 1991-8178

Ali, Mohammad Yeakub and Khan, Ahsan Ali and Mohamad Asharaf, Asfana Banu and Abdul Wahab, Adibah (2012) Prediction of minimum chip thickness in tool based micro end milling. International Journal of Integrated Engineering, 4 (1). pp. 6-10. ISSN 2229-838X

Khan, Ahsan Ali and Mohammed , Baba Ndaliman and Ali, Mohammad Yeakub and Mansor, Mas Hafizah and Idrus, Nurul-Ain (2012) Surface modification by EDM using Co-Cr sintered powder metallurgy electrode. Advanced Materials Research, 576. pp. 56-59. ISSN 1022-6680

Mohammed Baba, Ndaliman and Khan, Ahsan Ali and Ali, M. Y. (2011) Surface alloying of Ti-6Al-4V using Cu-TaC composite electrode during electrical discharge machining. In: Regional Tribology Conference 2011, 22-24 November 2011, Langkawi, Malaysia.

Khan, Ahsan Ali and Ali, Mohammad Yeakub (2011) Application of silicon carbide in abrasive water jet machining. In: Silicon Carbide. InTech, pp. 431-452. ISBN 9789533079684

Ndaliman, Mohammed Baba and Khan, Ahsan Ali (2011) Development of Powder Metallurgy (PM) compacted Cu-TaC electrodes for EDM. Journal of Mechanics Engineering and Automation, 1 (5). pp. 385-391. ISSN 2159-5275 (P); 2159-5283 (O)

Khan, Ahsan Ali and Mohammed , Baba Ndaliman and Mohd Zain, Zakaria and Jamaludin, Mohammad F. and Patthi, Umar (2011) Surface modification using Electric Discharge Machining (EDM) with powder addition. Applied Mechanics and Materials, 110/6. pp. 725-733. ISSN 1660-9336 (O), 978-303785262-0 (P)

Khan, Ahsan Ali (2011) Role of heat transfer on process characteristics during electrical discharge machining. In: Developments in Heat Transfer. InTech (Open access book), pp. 417-436. ISBN 978-953-307-569-3

Shaha, Sugrib Kumar and Khan, Ahsan Ali and Haque, Md. Mohafizul (2011) Design and development of Acrylic Die for producing wax pattern to gabricate hip bone joint. Journal of Materials Science and Engineering B, 1. pp. 184-189. ISSN 0921-5107

Abdulkareem, Suleiman and Khan, Ahsan Ali and Mohd Zain, Zakaria (2011) Experimental investigation of machining parameters on surface roughness in dry and wet wire-electrical discharge machining. Advanced Materials Research, 264/5. pp. 831-836. ISSN 1022-6680

Abdulkareem, Suleiman and Khan, Ahsan Ali and Mohamed , Konneh (2011) Influence of electrode cooling on material migration among the electrodes during EDM of titanium alloy. Advanced Materials Research, 264-65. pp. 1199-1204. ISSN 1022-6680

Abdulkareem, Suleiman and Khan, Ahsan Ali and Mohamed , Konneh (2011) Influence of electrode cooling on material migration among the electrodes during edm of titanium alloy. Advanced Materials Research, 264-65. pp. 1199-1204. ISSN 1662-8985

Zain, Zakaria Mohd and Khan, Ahsan Ali and Abdulkareem, Suleiman (2011) Influence of electrode profiles on electrical discharge machining of titanium. Advanced Materials Research, 264-65. pp. 1205-1210. ISSN 1022-6680

Khan, Ahsan Ali and Abdulkareem, Suleuman and Ahmad Abdul Ghani, Nadiatul Amirah and Mohammad Ariffin, Dayanna Sarah (2011) Investigation on the surface finish, MRR and the surface damage during the EDM of tungsten carbide. Advanced Materials Research, 264-65. pp. 1073-1078. ISSN 1022-6680

A.K.M, Asif Iqbal and Khan, Ahsan Ali (2011) Optimization of process parameters on EDM milling of stainless steel AISI 304. Advanced Materials Research, 264-65. pp. 979-984. ISSN 1022-6680

Shaha, Sugrib Kumar and Haque, Md. Mohafizul and Khan, Ahsan Ali (2011) Study on the microstructure and properties of Fe-C-Si and Fe-C-Al Cast irons. Advanced Materials Research, 264-65. pp. 1933-1938. ISSN 1022-6680

Shaha, Sugrib Kumar and Haque, Md. Mohafizul and Khan, Ahsan Ali (2011) Wear characteristics of Fe-C-Si and Fe-C-Al cast irons. Advanced Materials Research, 264-65. pp. 1928-1932. ISSN 1022-6680

Mohd Zain, Zakaria and Mohammed, Baba Ndaliman and Khan, Ahsan Ali and Mohammad , Yeakub Ali (2011) Influence of TaC Powder Additive on electrical discharge machining of stainless Steel. In: 2nd International Conference on Mechanical and Manufacturing Engineering 2011 (ICME 2011), 6-7 June 2011, Batu Pahat, Johor.

Mohammed, Baba Ndaliman and Khan, Ahsan Ali and Mohd. Zain, Zakaria (2011) Performance of PM compacted Cu-TaC electrodes during EDM. In: 2nd International Conference on Mechanical & Manufacturing Engineering 2011, (ICME 2011), 6-7 June 2011, Putrajaya, Malaysia.

Abdulkareem, Suleiman and Khan, Ahsan Ali and Mohd Zain, Zakaria (2011) Effect of machining parameters on surface roughness during wet and dry Wire-EDM of stainless steel. Journal of Applied Sciences. pp. 1-5. ISSN 1812-5662 (O), 1812-5654 (P)

Mohammed , Baba Ndaliman and Khan, Ahsan Ali (2011) Development of Powder Metallurgy (PM) compacted Cu-TaC electrode for EDM. In: International Conference on Mechanical, Automotive and Aerospace Engineering 2011 ICMAAE '11, 17-19 May 2011, Kuala Lumpur, Malaysia.

Khan, Ahsan Ali and Mohammed, Baba Ndaliman and Mohammad , Yeakub Ali (2011) Developments in EDM process variables. In: Advanced Machining Processes. International Islamic University Malaysia, Kuala Lumpur, Malaysia, pp. 70-75. ISBN 9789674181628

Mohd Ali, Afifah and Khan, Ahsan Ali and Mohammad , Yeakub Ali (2011) Effect of process parameters on abrasive contamination during water abrasive jet machining of mild steel. Advanced Materials Research, 264-65. pp. 1015-1020. ISSN 1022-6680

Khan, Ahsan Ali and Mohd Hambiyah, Mohammad Azhadi and Nazi Nadin, Mohd Faiz (2011) Features of EDM of mild steel with Ta-Cu powder compacted electrodes. In: Advanced Machining Process. International Islamic University Malaysia, Kuala Lumpur, Malaysia, pp. 23-27. ISBN 9789674181628

Khan, Ahsan Ali and Nazi Nadin, Mohd Faiz and Mohd Hambiyah, Mohammad Azhadi (2011) Features of electrode wear during EDM of mild steel with TaC-Cu powder compacted electrodes. In: Advanced Machining Processes. International Islamic University Malaysia, Kuala Lumpur, Malaysia, pp. 49-53. ISBN 9789674181628

Khan, Ahsan Ali and Adesta, Erry Yulian Triblas and Mohammad , Yeakub Ali (2011) Formation of micro-cracks and recast layer during EDM of mild steel using copper electrodes. In: Advanced Machining Processes. International Islamic University Malaysia, Kuala Lumpur, Malaysia, pp. 44-48. ISBN 9789674181628

Khan, Ahsan Ali and Nazi Nadin, Mohd Faiz and Mohd Hambiyah, Mohammad Azhadi (2011) Influence of current, spark on-time and off-time on electrode wear during EDM of mild steel. In: Advanced Machining Processes. International Islamic University Malaysia, Kuala Lumpur, Malaysia, pp. 54-58. ISBN 9789674181628

Abdulkareem, Suleiman and Khan, Ahsan Ali and Mohamed , Konneh (2011) Influence of electrode cooling on recast layers and micro crack in EDM of titanium. Advanced Materials Research, 264-65. pp. 1180-1186. ISSN 1022-6680

Khan, Ahsan Ali and Adesta, Erry Yulian Triblas and Mohammad , Yeakub Ali (2011) Influence of machining parameters on surface roughness during EDM of mild steel. In: Advanced Machining Process. International Islamic University Malaysia, Kuala Lumpur, Malaysia, pp. 33-37. ISBN 9789674181628

Ishak, Norazah and Khan, Ahsan Ali (2011) Recent developments in EDM. In: Manufacturing management from basic machining to quality product. IIUM Press, Kuala Lumpur, pp. 46-52. ISBN 9789674181659

Khan, Ahsan Ali and Mohd Ali , Munira and Mohd Shaffiar , Norhashimah (2011) Relationship between machining variables and process characteristics during wire EDM. In: Advanced Machining Processes. International Islamic University Malaysia, Kuala Lumpur, Malaysia, pp. 28-32. ISBN 9789674181628

Khan, Ahsan Ali and Mohd Noh, Nurul Shima (2011) Role of current, voltage and spark on-time on electrode material migration during EDM. In: Advanced Machining Process. International Islamic University Malaysia, Kuala Lumpur, Malaysia, pp. 12-17. ISBN 9789674181628

Khan, Ahsan Ali and Mohammed , Baba Ndaliman and Mohd Zain, Zakaria and Jamaludin, Mohammad F. and Patthi, Umar (2011) Surface Modification using Electric Discharge Machining (EDM) with powder addition. In: 2nd International Conference on Mechanical, Industrial, and Manufacturing Technologies (MIMT 2011), 26-28 February 2011, Singapore.

Ndaliman, Mohammed Baba and Khan, Ahsan Ali and Ali, Mohammad Yeakub (2011) Surface modification of titanium alloy through electrical discharge machining (EDM). International Journal of Mechanical and Materials Engineering, 6 (3). pp. 380-384. ISSN 1823-0334

Khan, Ahsan Ali and Saad, Affendi and Mohd Isa, Mohd Zulfadli Isma (2011) Tool wear rate during electrical discharge machining (EDM) with eccentric electrode. In: Advanced Machining Process. International Islamic University Malaysia, Kuala Lumpur, Malaysia, pp. 2-6. ISBN 9789674181628

Khan, Ahsan Ali and Saad, Affendi and Mohd Isa, Mohd Zulfadli Isma (2011) Wear ratio and work surface finish during electrical discharge machining (EDM) with eccentric electrode. In: Advanced Machining Processes. International Islamic University Malaysia, Kuala Lumpur, Malaysia, pp. 7-11. ISBN 9789674181628

Khan, Ahsan Ali and Aman Nor Rasid, Zuraida and Yusof, Izausmawati (2011) A comparative study on flank wear and work surface finish during high speed milling of cast iron with different carbide tools. In: Advanced Machining Processes. International Islamic University Malaysia, Kuala Lumpur, Malaysia, pp. 196-200. ISBN 9789674181628

Khan, Ahsan Ali and Nazi Nadin, Mohd Faiz and Mohd Hambiyah, Mohammad Azhadi (2011) A comparative study on work surface hardness EDMed by Ta-C powder compacted and copper electrodes. In: Advanced Machining Processes. International Islamic University Malaysia, Kuala Lumpur, Malaysia, pp. 59-64. ISBN 9789674181628

Khan, Ahsan Ali and Mohammed, Baba Ndaliman (2011) An introduction to electrical discharge machining (EDM). In: Advanced Machining Processes. International Islamic University Malaysia, Kuala Lumpur, Malaysia, pp. 65-69. ISBN 9789674181628

Khan, Ahsan Ali and Mohd Hambiyah, Mohammad Azhadi and Nazi Nadin, Mohd Faiz (2011) A study on material removal rate during EDM with tantalum carbide-copper compacted electrode. In: Advanced Machining Process. International Islamic University Malaysia, Kuala Lumpur, Malaysia, pp. 18-22. ISBN 9789674181628

Khan, Ahsan Ali and Ali, Mohammad Yeakub and Haque, Md. Mohafizul (2010) A new approach of applying cryogenic coolant in turning AISI 304 stainless steel. International Journal of Mechanical and Materials Engineering (IJMME), 5 (2). pp. 171-174. ISSN 1823-0334

Abdulkareem, Suleiman and Khan, Ahsan Ali and Konneh, Mohamed (2010) Cooling effect on electrode and process parameters in EDM. Materials and Manufacturing Processes, 25 (6). pp. 462-466. ISSN 1532-2475 (O), 1042-6914 (P)

Afifah, Ali and Khan, Ahsan Ali and Ali, Mohammad Yeakub (2010) Effect of Process Parameters on Abrasive Contamination During Water Abrasive Jet Machining of Mild Steel. In: UNSPECIFIED.

Khan, Ahsan Ali and Ali, Mohammad Yeakub and Haque, Md. Mohafizul (2010) Effect of discharge current and electrode size on material removal rate and wear ratio in electrical discharge machining. International Journal of Mechanical Engineering, 7 (1). pp. 81-90. ISSN 1823-5514

Iqbal, A.K.M. Asif and Khan, Ahsan Ali (2010) Influence of process parameters on electrical discharge machined job surface integrity. American Journal of Engineering and Applied Sciences, 3 (2). pp. 396-402. ISSN 1941-7039 (O), 1941-7020 (P)

Khan, Ahsan Ali and Adesta, Erry Yulian Triblas and Mohammad , Yeakub Ali (2010) Influence of process parameters on surface integrity during EDM of mild steel. In: 22nd United Kingdom-Malaysia Engineering Conference 2010, 8-9th April, 2010, London.

Asif Iqbal, A.K.M. and Khan, Ahsan Ali (2010) Modeling and analysis of MRR, EWR and surface roughness in EDM milling through response surface methodology. American Journal of Engineering and Applied Sciences, 3 (4). pp. 611-619. ISSN 1941-7039 (O), 1941-7020 (P)

M. A., Amir and Khan, Ahsan Ali (2009) A study of abrasive water jet machining process on glass/epoxy composite laminate. Journal of Materials Processing Technology, 209 (20). pp. 6168-6173. ISSN 0924-0136

Khan, Ahsan Ali and Mridha, Shahjahan and Ali, Mohammad Yeakub (2009) Cryogenic grinding of mild steel and stainless steel. International Journal for manfacturing Science and Production, 10 (1). pp. 69-74. ISSN 2191-0375 (O); 0793-6648 (P)

Azhari , Mohd Azmir and Khan, Ahsan Ali and Abdullah, Rahmah (2009) Effect of abrasive water jet machining parameters on aramid fibre reinforced plastics composite. International Journal of Material Forming, 2 (1). pp. 37-44. ISSN 1960-6214 (O), 1960-6206 (P)

Khan, Ahsan Ali and Mridha, Shahjahan and Ali, Mohammad Yeakub (2009) Effect of cryogenic cooling during grinding of mild steel and stainless steel. In: Proceedings of the Seminar on Research Findings 2008. IIUM Press, Kuala Lumpur, pp. 397-404. ISBN 9789833855780

Haque, Md. Mohafizul and Khan, Ahsan Ali and Ismail, Ahmad Faris (2009) Investigation on tool wear rate for modified and unmodified aluminium-silicon casting alloy. International Journal of Modern Physics B, 23 (6-7). pp. 826-831. ISSN 0217-9792 E-ISSN 1793-6578

Ali, Mohammad Yeakub and Khan, Ahsan Ali and Othman, Khairul Irman and Omar, Mohd Aliff (2009) Micro end milling of AISI 304 stainless steel and analysis of micro surface roughness. In: Proceedings of the 2009 International Conference on Mechanical and Electrical Technology (ICMET'09), 8 - 11 August 2012, Beijing.

Abdulkareem, Suleiman and Khan, Ahsan Ali and Mohamed , Konneh (2009) Reducing electrode wear ratio using cryogenic cooling during electrical discharge machining. International Journal of Advanced Manufacturing Technology, 45 (11-12). pp. 1146-1151. ISSN 1433-3015 (O); 0268-3768 (P)

Mohammad, Yeakub Ali and Khan, Ahsan Ali and Hamzah, Munirah and Khalid, Nor Azura (2009) Study of material removal rate and electrode wear ratio for micro electrical discharge milling of AISI 420 and Stavax ESR. International Journal of Mechanical and Materials Engineering (IJMME), 4 (3). pp. 300-308. ISSN 1823-0334

Khan, Ahsan Ali and Ali, Mohammad Yeakub and Haque, Md. Mohafizul (2009) A study of electrode shape configuration on the performance of die sinking EDM. International Journal of Mechanical and Materials Engineering, 4 (1). pp. 19-23. ISSN 1823-0334

Khan, Ahsan Ali and Haque, Md. Mohafizul and Ali, Mohammad Yeakub (2008) Effect of size and shape of electrodes on the performance of EDM. In: 13th International Conference on Applied Mechanics and Mechanical Engineering, 27 - 29 May 2008, Cairo, Egypt.

Khan, Ahsan Ali and Ahmed, Mirghani Ishak (2008) Improving tool life using cryogenic cooling. Journal of Materials Processing Technology, 196 (1-3). pp. 149-154.

Khan, Ahsan Ali and Mridha, Shahjahan and Ali, Mohammad Yeakub (2008) Effect of cryogenic cooling during grinding of mild steel and stainless steel. In: International Conference on Mechanical and Manufacturing (ICME 2008), 21-23 May 2008, Johor Bahru, Malaysia.

Khan, Ahsan Ali (2008) Electrode wear and material removal rate during EDM of aluminum and mild steel using copper and brass electrodes. The International Journal of Advanced Manufacturing Technology, 39 (5-6). pp. 482-487. ISSN 0268-3768

Ali, Mohammad Yeakub and Khan, Ahsan Ali and Mehfuz, R. and Aishah, S. and Hayati, N. and Hajar, N. (2008) Fabrication of micromold cavity for microreplication: A review. In: International Conference on Mechanical and Manufacturing Engineering (ICME 2008), 21-23 May 2008, Johor Bahru, Malaysia.

Mohd Azhari, Mohd Azmir and Khan, Ahsan Ali (2008) Investigation on glass/epoxy composite surfaces machined by abrasive water jet machining. Journal of Materials Processing Technology, 198 (1-3). pp. 122-128. ISSN 0924-0136

Haque, Md. Mohafizul and Khan, Ahsan Ali (2008) Investigation on structure and properties of brass casting. Journal of Materials Science & Technology, 24 (3). pp. 299-301. ISSN 1005-0302

Ali, Mohammad Yeakub and Amin, A. K. M. Nurul and Khan, Ahsan Ali (2008) Microengineering education in IIUM: challenges and successes. In: International Conference on MEMS and Nanotechnology, ICMN'08, 13-15 May 2008, Saloma Bistro and Theatre Restaurant, Kuala Lumpur, Malaysia.

Khan, Ahsan Ali and Abdulkareem, Suleiman (2008) Modeling of EDM Process parameters for Machining Stainless Steel using Copper Electrodes. The International Journal for Manufacturing Science & Production, 9 (1-2). pp. 87-98. ISSN 0793-6648

Mridha, Shahjahan and Khan, Ahsan Ali (2008) The effects of process variables on the hardness of nitrided 3% chromium steel. Journal of Materials Processing Technology, 201 (1-3). pp. 325-330. ISSN 0924-0136

Khan, Ahsan Ali and Haque, Md. Mohafizul (2007) Performance of different abrasive materials during abrasive water jet machining of glass. Journal of Materials Processing Technology, 191 (1-3). pp. 404-407. ISSN 0924-0136

Khan, Ahsan Ali and Salama Hajjaj, Sami (2006) Capabilities of cermets tools for high speed machining of austenitic stainless steel. Journal of Applied Sciences, 6 (4). pp. 779-784. ISSN 1812-5654

Khan, Ahsan Ali and Mohd Ali , Munira and Shaffiar, Norhashimah (2006) Relationship of surface roughness with current and voltage during wire EDM. Journal of Applied Sciences, 6 (10). pp. 2317-2320. ISSN 1812-5662 (O), 1812-5654 (P)

Ali, Mohammad Yeakub and Reyad, Mehfuz and Khan, Ahsan Ali and Ismail, Ahmad Faris (2005) Micro Electro Discharge Milling for Microfabrication. In: Micromachining. In-Tech, Croatia, pp. 1-28. (In Press)

Khan, Ahsan Ali and Awang, Mohd Efendee and Annuar, Ahmad Azwari (2005) Surface roughness of Carbides produced by abrasive water jet machining. Journal of Applied Sciences, 5 (10). pp. 1757-1761. ISSN 1812-5654

Khan, Ahsan Ali and Munajat, Noraziaty and Tajudin, Harnisah (2005) A study on abrasive water jet machining of aluminum with garnet abrasives. Journal of Applied Sciences, 5 (9). pp. 1650-1654. ISSN 1812-5654

Hossain, Md. Bellal and Khan, Ahsan Ali and Karim, A.N. Mustafizul (2000) Influence of cutting tool angles on the formation of built-up-edge. In: International Conference on Manufacturing (ICM 2000), 24-26 February, 2000, Dhaka.

Azim, M. Anwarul and Amin, A. K. M. Nurul and Khan, Ahsan Ali (1989) Design and manufacture of a ten ton capacity wedge jack. Industrial & Production Engineering Research Bulletin, 4 (1). pp. 1-10.