Items where Author is "Halim, Zahurin"
 | Up a level |
Article
Azahari, Nur Najma Athirah and Anuar, Hazleen and Hassan, Azman and Jawaid, Mohammed and Halim, Zahurin and Samsudin, Sani Amril (2023) Thermal, dynamic mechanical, mechanical and flammability properties of halloysite nanotubes filled polyamide 11 nanocomposites. Malaysian Journal of Fundamental and Applied Sciences, 19 (2). pp. 173-193. ISSN 2289-5981 E-ISSN 2289-599X
Halim, Zahurin and Ahmad, Zuraida and Tajuddin, Maisarah (2020) Physical consolidation of rattan furniture waste fibers in self-bonded boards under morphological analysis. Malaysian Journal of Microscopy, 16 (2). pp. 112-118. ISSN 1823-7010 E-ISSN 2600-7444
Samat, Noorasikin and Mohd Lazim, Nurul Hakimah and Halim, Zahurin (2019) Dynamic mechanical and water absorption properties of microcrystalline cellulose reinforced polypropylene composites: the effect of unconventional irradiation route. IIUM Engineering Journal, 20 (2). pp. 188-196. ISSN 1511-788X E-ISSN 2289-7860
Ahmad, Zuraida and Tajuddin, Maisarah and Maleque, Md. Abdul and Halim, Zahurin (2019) Effects of particle sizes on the properties of binderless boards made from rattan furniture waste. Journal of Engineering Science, 15. pp. 49-61.
Ahmad, Zuraida and Tajuddin, Maisarah and Salim, Nurul Farhana Fatin and Halim, Zahurin (2018) Effect of alkaline treatment on properties of rattan waste and fabricated binderless particleboard. IIUM Engineering Journal, 19 (1). pp. 185-196. ISSN 1511-788X E-ISSN 2289-7860
Tajuddin, Maisarah and Ahmad, Zuraida and Ahmad, Roszalia and Halim, Zahurin (2017) Effects of pressing temperature and pressing time onto the properties of binderless particleboard made from rattan furniture waste. Journal of Built Environment, Technology And Engineering (JBETE), 3. pp. 11-18. ISSN 0128-1003
Md Yusof, Fauziah and Abd Rahim, Mohd Khairul Hazami and Samsudin, Ahmad Safwan and Mohamad Nor, Nor Hafiez and Ahmad, Zuraida and Halim, Zahurin (2016) Optimization of natural fiber composite parameter using Taguchi approach. Advanced Materials Research, 1133. pp. 185-188. ISSN 1022-6680
Halim, Zahurin and Othman, Maizatulnisa and Abdul Rahman, Siti Khadijah (2015) SEM analysis of kenaf sandwich panel. Advanced Materials Research, 1115. pp. 300-303. ISSN 1662-8985
Hassan, Noor Azlina and Hassan, Norita and Johari, Norhasnidawani and Halim, Zahurin and Ahmad, Zuraida (2015) Mechanical properties of kenaf core sandwich panel toughened with modified epoxy. Advanced Materials Research, 1115. pp. 275-278. ISSN 1662-8985
Othman, Maizatulnisa and Bukhari, Mohamad and Halim, Zahurin and Mohamad, Souad A. and Khalid, Khalisanni (2015) Sandwich structure composites:effect of kenaf on mechanical properties. International Journal of Chemical, Molecular, Nuclear, Materials and Metallurgical Engineering, 9 (1). pp. 189-192.
Samat, Noorasikin and Zulkapli, Nor Najihah and Halim, Zahurin and Ahmad, Zuraida and Abang Ismawi Hassim, Dayang Habibah (2015) Study of mechanical and flammability properties of polypropylene/microcrystalline cellulose composites filled with nano-sized aluminium hydroxide (ATH) particles. Advanced Materials Research, 1115. pp. 402-405. ISSN 1022-6680
Ahmad, Zuraida and Halim, Zahurin and Mohamad, Souad A. and Salleh, Md. Noor and Ismail, Ahmad Faris (2014) Tapping into student’s passion, curiosity, engagement and dreams: engineering educator’s task. Science International Lahore, 26 (5). pp. 2569-2575. ISSN 1013-5316
Johari, Norhasnidawani and Hassan, Noor Azlina and Halim, Zahurin (2013) Thermal analysis of kenaf sandwich panel. Advanced Materials Research, 812. pp. 271-274. ISSN 1022-6680
Othman, Maizatulnisa and Ibrahim, Nor Azowa and Ruzaidi, Che Mohd and Mohd Nazarudin, Zakaria and Halim, Zahurin (2012) Biodegradability analysis of KBF reinforced poly(lactic acid) biocomposites. Advanced Materials Research, 576. pp. 434-437. ISSN 1022-6680
Ahmad, Zuraida and Yusof, Yusliza and Omar, Nurihan and Anuar, Hazleen and Halim, Zahurin and Samat, Noorasikin (2012) Properties of montmorillonite-reinforced thermoplastic sago starch composites. Advanced Materials Research, 445. pp. 469-474. ISSN 1022-6680
Maleque, Md. Abdul and Afdzaluddin, Atiqah and Ria Jaafar, Talib and Halim, Zahurin (2012) New natural fibre reinforced aluminium composite for automotive brake pad. International Journal of Mechanical and Materials Engineering (IJMME), 7 (2). pp. 166-170. ISSN 1823-0334
Ahmad, Zuraida and Ismail, Ahmad Faris and Shafie, Amir Akramin and Ihsan, Sany Izan and Halim, Zahurin and Mohamad, Souad A. (2011) Islamisation of engineering education in International Islamic University Malaysia (IIUM): problems and prospect. Revelation and Science, 1 (3). pp. 131-137. ISSN 2229-9947
Ahmad, Zuraida and Anuar, Hazleen and Halim, Zahurin and Abang Haji Abdul Majid, Dayang Laila and Md Yusof, Fauziah (2011) Cotton reinforced biopolymer matrix composite: effect of ultraviolet (UV) on its mechanical properties. Key Engineering Materials, 472-72. pp. 928-932. ISSN 1013-9826
Ahmad, Zuraida and Yusof, Yusliza and Halim, Zahurin and Md. Yusof, Fauziah (2011) Cotton reinforced biopolymer matrix composite: effect of curing and aging conditions on its mechanical properties. Key Engineering Materials, 471-72. pp. 403-408. ISSN 1013-9826
Ahmad, Zuraida and Sarifuddin, Nurshahida and Iis, Sopyan and Halim, Zahurin (2011) Effect of fiber length variations on mechanical and physical properties of coir fiber reinforced cement-albument composites (CFRCC). IIUM Engineering Journal, 12 (1). pp. 63-75. ISSN 1511-788X
Book
Yaacob, Iskandar Idris and Maleque, Md. Abdul and Halim, Zahurin, eds. (2011) Advances in composite materials. IIUM Press, Kuala Lumpur, 0-1. ISBN 9789674182311
Halim, Zahurin and Yaacob, Iskandar Idris and Maleque, Md. Abdul, eds. (2011) Advances in materials engineering Vol. 1. IIUM Press, Kuala Lumpur. ISBN 9789674181673
Maleque, Md. Abdul and Yaacob, Iskandar Idris and Halim, Zahurin, eds. (2011) Advances in materials engineering Vol. 2. IIUM Press, Kuala Lumpur. ISBN 9789674181680
Maleque, Md. Abdul and Yaacob, Iskandar Idris and Halim, Zahurin, eds. (2011) Contemporary metallic materials. IIUM Press, Kuala Lumpur, 0-1. ISBN 9789674181642
Book Chapter
Ahmad, Zuraida and Zain, Saidi and Halim, Zahurin and Ismail, Ahmad Faris (2018) Perceptions of the students on the developed Islamic Integrated Physics Textbook (IIPT): a case study. In: Rejuvenating Islamic thought. IIUM Press, International Islamic University Malaysia, Kuala Lumpur, pp. 152-166. ISBN 978-967-491-010-5
Yusof, Yusliza and Halim, Zahurin (2011) Albumen-thermoplastic sago starch reinforeced cotton: agro-green composites. In: SAGO (Metroxylan rottb) and its applications. IIUM Press, Kuala Lumpur, pp. 27-40. ISBN 9789674181635
Halim, Zahurin and Mohd Noh, Nabiha and Mohamad, Nurshazana (2011) Characteristics of oil palm biomass via mixture of Empty Fruit Bunch (EFB) fiber and mesocarp fiber. In: Advances in composite materials. IIUM Press, Kuala Lumpur, pp. 45-48. ISBN 9789674182311
Halim, Zahurin and Mohamad, Nurshazana (2011) Fabrication of biomass pellet from mesocarp fiber. In: Advances in Materials Engineering - Volume 2. IIUM Press, Kuala Lumpur, pp. 65-70. ISBN 9789674181680
Halim, Zahurin and Abdul Rahman, Siti Khadijah (2011) Fabrication of kenaf sandwich panel. In: Advances in Materials Engineering - Volume 2. IIUM Press, Kuala Lumpur, pp. 71-77. ISBN 9789674181680
Halim, Zahurin and Taib, Meor Mohd Adli (2011) Finite element analysis of interlaminar stresses in edge delamination. In: Advances in composite materials. IIUM Press, Kuala Lumpur, pp. 190-195. ISBN 9789674182311
Ahmad, Zuraida and Halim, Zahurin and Md Yusof, Fauziah (2011) Investigation on the effect of ultra violet on cotton albumen composite. In: Advances in materials engineering - Volume 2. IIUM Press, Kuala Lumpur, pp. 96-99. ISBN 9789674181680
Halim, Zahurin and Ahmad, Zuraida and Md Yusof, Fauziah (2011) Investigation on the effect of water immersion on cotton albumen composite. In: Advances in composite materials. IIUM Press, Kuala Lumpur, pp. 178-181. ISBN 9789674182311
Johari, Norhasnidawani and Abd. Rahim, Safiyah Hazwani and Halim, Zahurin (2011) Mechanical behaviour of eco core composite sandwich structure. In: Advances in composite materials. IIUM Press, Kuala Lumpur, pp. 40-44. ISBN 9789674182311
Halim, Zahurin and Basri, Shahnor and Ajir, Mohd Ramli (2011) Numerical and experimental investigation of peel strength of composite sandwich structures. In: Advances in composite materials. IIUM Press, Kuala Lumpur, pp. 182-189. ISBN 9789674182311
Omar, Nurizan and Nordin, Norhuda Hidayah and Halim, Zahurin (2011) Preliminary study on superabsorbent polymer hydrogel from sago starch. In: SAGO (Metroxylan rottb) and its applications. IIUM Press, Kuala Lumpur, pp. 115-128. ISBN 9789674181635
Halim, Zahurin and Mohamad, Norshazana and Mohd Noh, Nabiha (2011) The physical properties of biomass pellet from mesocarp and EFB fibre. In: Malaysia natural fibers for diversed bio-based application. IIUM Press, Kuala Lumpur, pp. 49-59. ISBN 9789674180218
Proceeding Paper
Azahari, Nur Najma Athirah and Anuar, Hazleen and Hassan, Azman and Jawaid, Mohammed and Halim, Zahurin and Samsudin, Sani Amril (2023) Mechanical properties of magnesium hydroxide/halloysite nanotubes reinforced polyamide 11 nanocomposites. In: 5th International Conference on Advances in Manufacturing and Materials Engineering, 9th - 10th August 2022, Kuala Lumpur, Malaysia.
Maleque, Md. Abdul and Halim, Zahurin and Ahmad Azhar, Ahmad Zahirani and Mohd Zaki, Hafizah Hanim and A.R., Nur Farina and Parveez, Bisma (2019) Sustainable lightweight composite materials. In: Tech Plan Demo Day in Malaysia 2019, 20 July 2019, SME Corporation, KL Sentral, KL. (Unpublished)
Maleque, Md. Abdul and Paijan, Lailatul Harina and Abdul Rahman, Nurfarina and Halim, Zahurin (2018) Eco-SiC reinforced aluminium matrix composite for motorbike brake disc application. In: Malaysia Technology Expo 2018, 22nd-24th Feb. 2018, Kuala Lumpur. (Unpublished)
Abdul Aziz, Mohammad and Halim, Zahurin and Othman, Maizatulnisa (2018) Effect of different concentration of sodium hydroxide [NaOH] of sodium hydroxide [NaOH] on Kenaf sandwich structures. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8 - 9 August 2017, International Islamic University Malaysia (IIUM), Gombak Campus, Kuala Lumpur.
Othman, Maizatulnisa and N., Hasmida and Halim, Zahurin and Jamal, Nur Ayuni and Khalid, Khalisanni and Zakaria, Noor Amalina and Al-Bat’hi, Souad A. M. (2018) Mechanical properties of gracilaria lichenoides reinforced bioplastic film. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8th-9th August 2017, International Islamic University Malaysia (IIUM), Gombak Campus, Kuala Lumpur.
Ahmad, Zuraida and Y., Insyirah and Tajuddin, Maisarah and Halim, Zahurin (2018) Influence of fiber treatment on dimensional stabilities of rattan waste composite boards. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8-9 August 2017, Kuala Lumpur, Malaysia.
Tajuddin, Maisarah and Ahmad, Zuraida and Halim, Zahurin and Maleque, Md Abd and Ismail, Hanafi and Sarifuddin, Norshahida (2017) Physical properties of heat-treated rattan waste binderless particleboard. In: 3rd International Conference of Global Network for Innovative Technology 2016: Advanced Materials for Innovative Technologies, IGNITE 2016, 27th–29th January 2016, Penang, Malayia.
Tajuddin, Maisarah and Ahmad , Zuraida and Sulaiman, Mohd Faris Haikal and Halim, Zahurin and Maleque, Md. Abdul (2016) Fungi growth on rattan board exposed to natural weathering. In: 4th International Conference on Biotechnology Engineering 2016 (ICBioE 2016), 25th-27th July 2016, Kuala Lumpur.
Ahmad, Zuraida and Halim, Zahurin (2013) Creativity and the future of engineering education: making the strange familiar. In: International Conference on Engineering Education 2013, 22nd-25th Dec. 2013, Madinah, Kingdom of Saudi Arabia.
Samat, Noorasikin and Ahmad, Zuraida and Halim, Zahurin and Anuar, Hazleen and Sabaruddin, Fatimah Atiyah (2012) Mechanical and flammability properties of PVC reinforced with nano-sized ATH particles. In: International Conference on Nanotechnology (ICONT 2012), 29 May – 01 June 2012, Pahang. (Unpublished)
Maleque, Md. Abdul and A., Atiqah and R. J., Talib and Halim, Zahurin (2011) New natural fibre reinforced composite brake friction material. In: Regional Tribology Conference 2011, 22-24 November 2011, Langkawi, Malaysia.
Halim, Zahurin and Ahmad, Zuraida and Samat, Noorasikin and Anuar, Hazleen (2011) Study of new eco-core metal matrix composite sandwich structure. In: 14th International Conference on Advances in Material and Processing Technologies (AMPT 2011), 13 - 16 July 2011, Istanbul, Turkey. (Unpublished)
Anuar, Hazleen and Ahmad, Zuraida and Halim, Zahurin (2010) Single kenaf fibre properties via in situ monitoring using acoustic emission. In: Simposium Kebangsaan Aplikasi Sains Matematik 2010 (SKSM), 8-10 December 2010, Johor Bahru, Johor, Malaysia. (Unpublished)
Monograph
Halim, Zahurin and Ahmad, Zuraida and Sharif, Safian and Kalam, Anizah (2017) Investigation of surface degradation of binderless particleboards (BPB) by utilizing rattan furniture waste materials. Project Report. UNSPECIFIED. (In Press)