Items where Author is "Ginta, Turnad Lenggo "
 | Up a level |
Amin, A. K. M. Nurul and Ginta, Turnad Lenggo (2014) Heat-assisted machining. In: Comprehensive Materials Processing. Advanced Machining Technologies, 11 . Elsevier Ltd., Amsterdam, pp. 297-331. ISBN 9780080965338
Karim, A.N. Mustafizul and Ikram, M and Kays, H. M. Emrul and Abdesselam, M. and Ginta, Turnad Lenggo (2014) Assessment of machining cost for end-milling of Ti-6Al-4V titanium alloy through RSM-based parametric model. Advanced Materials Research, 529. pp. 83-89. ISSN 1022-6680
Amin, A. K. M. Nurul and Ginta, Turnad Lenggo (2013) Heat assisted machining of metals and alloys using induction heating method. In: International Conference on Engineering Research Innovation & Education (ICERIE 2013), 11 - 13 January 2013, Bangladesh.
Ginta, Turnad Lenggo and Amin, A. K. M. Nurul (2013) Surface integrity in end milling titanium alloy Ti6Al4V under heat assisted machining. Asian Journal of Scientific Research, 2013 (1). pp. 1-6. ISSN 1992-1454
Ginta, Turnad Lenggo and Amin, A. K. M. Nurul (2012) Cutting force and tool life models in end milling titanium alloy ti-4al-4v with thermally-assisted machining. International Journal of Mechanical Computational and Manufacturing Research, 1 (1). pp. 1-5. ISSN 2301-4148
Lajis, Mohd Amri and Amin, A. K. M. Nurul and Karim, A.N. Mustafizul and Ginta, Turnad Lenggo (2011) Performance evaluation of PCBN in end milling of AISI D2 hardened steel under room and preheated machining conditions. Advanced Materials Research, 264-65. pp. 901-906. ISSN 1662-8985
Hossain, Ishtiaq and Amin, A. K. M. Nurul and Patwari, Muhammed Anayet Ullah and Ginta, Turnad Lenggo (2011) Assessment of performance of uncoated and coated carbide inserts in end milling of Ti-6Al-4V through modelling. In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, International Islamic University Malaysia, Kuala Lumpur, Malaysia, pp. 195-202. ISBN 9789674181758
Ginta, Turnad Lenggo and Amin, A. K. M. Nurul and Ishtiyaq, M. H. (2011) Comparison of surface roughness in end milling of titanium alloy Ti-6Al-4V using uncoated WC-Co and PCD inserts through generation of models. In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, International Islamic University Malaysia, Kuala Lumpur, Malaysia, pp. 189-194. ISBN 9789674181758
Amin, A. K. M. Nurul and Ginta, Turnad Lenggo (2011) Machinability improvement in end milling of Titanium Alloy Ti-6Al-4V through preheating. In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, Kuala Lumpur, Malaysia, 09-17. ISBN 978-967-418-175-8
Amin, A. K. M. Nurul and Ginta, Turnad Lenggo and Ishtiyaq, M. H. (2011) Modeling for surface roughness in end-milling of Titanium alloy Ti-6Al-4V using uncoated WC-Co inserts. In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, Kuala Lumpur, Malaysia, pp. 161-166. ISBN 9789674181758
Lajis, M. A. and Amin, A. K. M. Nurul and Karim, A.N. Mustafizul and Ginta, Turnad Lenggo (2011) Modeling in preheated machining of AISI D2 hardened steel. In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, Kuala Lumpur, Malaysia, pp. 43-48. ISBN 9789674181758
Ginta, Turnad Lenggo and Amin, A. K. M. Nurul (2010) Improved machinability of Titanium alloy Ti-6Al-4V: implementation of preheated machining. LAP Lambert Academic Publishing, Germany. ISBN 978-3-8383-7307-2
Ginta, Turnad Lenggo and Amin, A. K. M. Nurul and Karim, A.N. Mustafizul and Lajis, M. A. (2009) Surface roughness and surface integrity of end milled titanium alloy TI-6AL-4V at room temperature and preheated machining. In: International Conference on Advances in Materials & Processing Technology (AMPT 2009), 26-29 Oct., 2009, Kuala Lumpur.
Ginta, Turnad Lenggo and Karim, A.N. Mustafizul and Amin, A. K. M. Nurul and Lajis, M. A. (2009) Surface roughness models for end milling titanium alloy TI-6AL-4V under room temperature and preheated machining. In: International Conference on Advances in Materials & Processing Technology (AMPT 2009), 26-29 Oct., 2009, Kuala Lumpur.
Ginta, Turnad Lenggo and Amin, A. K. M. Nurul and Che Daud, Mohd Radzi and Lajis, Mohd Amri (2009) Development of surface roughness models in end milling titanium alloy Ti-6Al-4V using uncoated tungsten carbide inserts. European Journal of Scientific Research, 28 (4). pp. 542-551. ISSN 1450-216X, 1450-202X
Lajis, Mohd Amri and Amin, A. K. M. Nurul and Karim, A.N. Mustafizul and Che Daud, Mohd Radzi and Ginta, Turnad Lenggo (2009) Hot machining of hardened steels with coated carbide inserts. American Journal of Engineering and Applied Sceices, 2 (2). pp. 421-427. ISSN 1941-7020
Ginta, Turnad Lenggo and Amin, A. K. M. Nurul and Lajis, Mohd Amri and Karim, A.N. Mustafizul and Che Daud, Mohd Radzi (2009) Improved tool life in end milling Ti-6A1-4V through workpiece preheating. European Journal of Scientific Research, 27 (3). pp. 384-391. ISSN 1450-216X, 1450-202X
Ginta, Turnad Lenggo and Amin, A. K. M. Nurul and Radzi, Mohd Che Daud and Lajis, Mohd Amri (2009) Tool life prediction by response surface methodology in end milling Titanium alloy Ti-6Al-4V using uncoated wc-co inserts. European Journal of Scientific Research, 28 (4). pp. 533-541. ISSN 1450-216X, 1450-202X
Ginta, Turnad Lenggo and Lajis, Mohd Amri and Amin, A. K. M. Nurul (2009) The performance of uncoated tungsten carbide insert in end milling titanium alloy Ti-6Al 4V through work piece preheating. American Journal of Engineering and Applied Sciences, 2 (1). pp. 147-153. ISSN 1941-7020
Lajis, M. A. and Amin, A. K. M. Nurul and Karim, A.N. Mustafizul and Ginta, Turnad Lenggo (2008) Hot machining in end milling of hardened steel AISI D2. In: International Conference on Advances in Materials and Processing Technologies (AMPT 2008).
Patwari, Muhammed Anayet Ullah and Amin, A. K. M. Nurul and Faris, Waleed Fekry and Ginta, Turnad Lenggo and Alam, S. and Lajis, M. A. (2008) Development of an artificial neural network model for the prediction of the chip serration frequency in end milling of medium carbon steel. In: International Conference of Curtin University of Science and Technology Engineering (CUTSE 2008), 24 - 27 November 2008, Sarawak, Malaysia.
Lajis, M. A. and Amin, A. K. M. Nurul and Karim, A.N. Mustafizul and Ginta, Turnad Lenggo and Patwari, Muhammed Anayet Ullah (2008) Preheated machining in end milling of hardened steel AISI D2. In: 9th Global Congress on Manufacturing and Management (GCMM2008), 12-14 November 2008, Gold Coast, Australia.
Hossain, Mohammad Ishtiaq and Amin, A. K. M. Nurul and Patwari, Muhammed Anayet Ullah and Ginta, Turnad Lenggo (2008) Comparison of uncoated and coated carbide inserts in end milling of Ti–6Al–4V in terms of surface roughness. International Journal of Materials Processing Technology. (In Press)
Ginta, Turnad Lenggo and Amin, A. K. M. Nurul and Lajis, Mohd Amri and Karim, A.N. Mustafizul and Sutjipto, Agus Geter Edy (2008) Tool life assessment in End Milling Titanium Alloy (Ti-6AI-4V) using PCD inserts. International Journal of Science Engineering and Technology, 1 (1). pp. 15-21. ISSN 1985-3785
Patwari, Muhammed Anayet Ullah and Amin, A. K. M. Nurul and Faris, Waleed Fekry and Alam, S. and Ginta, Turnad Lenggo (2008) A statistical approach for the prediction of cutting forces in end milling of medium carbon steel (S45C). In: International Conference on Science & Technology: Applications in Industry & Education, 12-13 December 2008, Pulau Pinang, Malaysia.
Ginta, Turnad Lenggo and Amin, A. K. M. Nurul and Karim, A.N. Mustafizul and Sutjipto, Agus G. (2007) Tool life prediction by response surface methodology for end milling titanium alloy ti–6al–4v using uncoated carbide inserts. In: International Conference on Mechanical Engineering (ICME07), 29-31 December 2007, Dhaka, Bangladesh.
Ishtiyaq, M. H. and Amin, A. K. M. Nurul and Karim, A.N. Mustafizul and Ginta, Turnad Lenggo and Patwari, Muhammed Anayet Ullah (2007) Application of response surface methodology coupled with genetic algorithm in the optimization of cutting conditions for surface roughness in end-milling of Inconel 718 using coated WC-co inserts. In: 4th International Conference on Leading Edge Manufacturing in the 21st Century (LEM 21), , 7-9 November 2007, Fukuoka, Japan..
Ginta, Turnad Lenggo and Amin, A. K. M. Nurul and Karim, A.N. Mustafizul and Ishtiyaq, M. H. (2007) Modeling for surface roughness in end-milling of titanium alloy Ti-6AI-4V using uncoated WC-Co and PCD Inserts. In: 4th International Conference on Leading Edge Manufacturing in the 21st Century (LEM 21), Noember 7-9, 2007, Fukuoka, Japan. .