Items where Author is "Che Daud, Mohd Radzi"

Jaswir, Irwandi and Sari, Dian Permata and Che Daud, Mohd Radzi and Sukmana, Raditya (2023) Motives for participation in halal food standard implementation: an empirical study in Malaysian halal food industry. International Journal of Islamic and Middle Eastern Finance and Management, 16 (5). pp. 928-954. ISSN 1753-8394

AlAzemi, Ahmed S KH R Q and Che Daud, Mohd Radzi (2020) Preventive maintenance for effective operation of boilers in Kuwait industry. International Journal of Mechanical and Production Engineering Research and Development, 10 (2). pp. 987-1002. ISSN 2249–6890 E-ISSN 2249–8001

Wahid, Zaharah and Che Daud, Mohd Radzi and Ahmad, Kartini (2020) Study on productivity improvement of manual operations in soya sauce factory. IIUM Engineering Journal, 21 (1). pp. 202-211. ISSN 1511-788X E-ISSN 2289-7860

Kays, H. M.Emrul and Karim, A. N.Mustafizul and Che Daud, Mohd Radzi (2020) A responsive multiplicative Holt-Winters approach for enhanced forecasting accuracy. International Journal of Industrial and Systems Engineering, 35 (1). pp. 1-12. ISSN 1748-5037 E-ISSN 1748-5045 (In Press)

Khalili, Amjad and Karim, A.N. Mustafizul and Ismail, Md Yusof and Che Daud, Mohd Radzi (2019) Linkages of QMS and soft EMS: perceptions of operations managers as modelled by SEM. International Journal of Services and Operations Management, 34 (3). pp. 341-360. ISSN 1744-2389

Khalili, Amjad and Ismail, Md Yusof and Karim, A.N. Mustafizul and Che Daud, Mohd Radzi (2019) Quality management practices and sustainable performance: examining the role of soft TQM as mediator. International Journal of Industrial and Systems Engineering, 31 (2). pp. 250-277. ISSN 1748-5037 E-ISSN 1748-5045

Kays, H. M.Emrul and Karim, A.N. Mustafizul and Che Daud, Mohd Radzi and Varela, Leonilde and Putnik, Göran and Machado, Jose (2018) A collaborative multiplicative Holt-Winters forecasting approach with dynamic fuzzy-level component. Applied Sciences (Switzerland), 8 (4). pp. 1-28. ISSN 2076-3417

Rashid, A. A. and Sidek, Atiah Abdullah and Suffian, S. A. and Che Daud, Mohd Radzi (2018) Environmental management competitive pressure effect on SME environmental innovation activities: A green supply chain perspective. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8 - 9 August 2017, International Islamic University Malaysia (IIUM), Gombak Campus, Kuala Lumpur.

Adesta, Erry Yulian Triblas and Avicenna, Avicenna and Hilmy, Irfan and Che Daud, Mohd Radzi (2018) Toolpath strategy for cutter life improvement in plunge milling of AISI H13 tool steel. In: International Conference on Advances in Manufacturing and Materials Engineering 2017 (ICAMME17), 8th-9th August 2017, Kuala Lumpur, Malaysia.

Shahlan, M. Z. and Sidek, Ayu Aszliana and Suffian, S A and Al Hazza, Muataz Hazza Faizi and Che Daud, Mohd Radzi (2018) An examination on the influence of small and medium enterprise (SME) stakeholder on green supply chain management practices. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8 - 9 August 2017, Kuala Lumpur, Malaysia.

Khalili, Amjad and Ismail, Md Yusof and Che Daud, Mohd Radzi (2018) Lean implementation: organizations approach to excellence. Noor Publishing, Mauritius. ISBN 9786202352321

Khan, Ahsan Ali and Muataz Hazza Faizi, Muataz and Mohiuddin, A. K. M. and Abdul Fattah, Nurfatihah and Che Daud, Mohd Radzi (2018) Performance of electrical discharge machining (EDM) with nickel added dielectric fluid. IIUM Engineering Journal, 19 (1). pp. 215-222. ISSN 1511-788X E-ISSN 2289-7860

Khalili, Amjad and Ismail, Md Yusof and Karim, A.N.Mustafizul and Che Daud, Mohd Radzi (2018) Soft total quality management and lean manufacturing initiatives: model development through structural equation modelling. International Journal of Productivity and Quality, 23 (1). pp. 1-30. ISSN 1746-6474 E-ISSN 1746-6482

Khan, Ahsan Ali and Mohamad Royani, Nurul Nasuha and Al Hazza, Muataz Hazza Faizi and Che Daud, Mohd Radzi and Mohiuddin, A. K. M. (2017) Improvement of surface quality using silicon carbide powder added dielectric fluid during EDM. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25th-27th July 2016, Kuala Lumpur, Malaysia.

Khan, Ahsan Ali and Abu Bakar, Marina and Al Hazza, Muataz Hazza Faizi and Che Daud, Mohd Radzi and Mohiuddin, A. K. M. (2017) Improving machining performance using alumina powder-added dielectric during electrical discharge machining (EDM). In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25th-27th July 2016, Kuala Lumpur, Malaysia.

Khalili, Amjad and Ismail, Md Yusof and Karim, Ahmad Izwan Mustafizul and Che Daud, Mohd Radzi (2017) Critical success factors for soft TQM and lean manufacturing linkage. Jordan Journal of Mechanical and Industrial Engineering, 11 (2). pp. 129-140. ISSN 1995-6665

Khalili, Amjad and Ismail, Md Yusof and Rahman, Mohammad Mustafizur and Che Daud, Mohd Radzi (2017) Examining the impact of lean manufacturing on soft TQM practices and sustainable performance: evidence from Malaysian Industries. In: 7th Annual Conference on Industrial Engineering and Operations Management, IEOM 2017, 11th-13th April 2017, Rabat, Morocco.

Khalili, Amjad and Ismail, Md Yusof and Karim, Ahmad Izwan Mustafizul and Che Daud, Mohd Radzi (2017) A comparative evaluation of contemporary models for lean manufacturing practices. International Journal of Services and Operations Management, 28 (1). pp. 26-45. ISSN 1744-2370 E-ISSN 1744-2389

Al Hazza, Muataz Hazza Faizi and Khan, Ahsan Ali and Yeakub Ali, Mohammad and Hasim, Siti Fatihah and Che Daud, Mohd Radzi (2017) A study on capabilities of different electrode materials during electrical discharge machining (EDM). IIUM Engineering Journal, 18 (2). pp. 189-195. ISSN 1511-788X E-ISSN 2289-7860

Khalili, Amjad and Ismail, Md Yusof and Karim, A.N. Mustafizul and Che Daud, Mohd Radzi (2016) Relationships of lean, green manufacturing and sustainable performance: Assessing the applicability of the proposed model. In: 6th International Conference on Industrial Engineering and Operations Management in Kuala Lumpur, IEOM 2016, 8th-10th March 2016, JW Marriott Hotel, Kuala Lumpur.

Khan, Ahsan Ali and Al Hazza, Muataz Hazza Faizi and Che Daud, Mohd Radzi and Ali , Mohammad Yeakub and Jamingan, Hazira (2016) Analyzing and modeling the influence of workpiece thickness on geometry of slot machining wire EDMs. In: 2015 4th International Conference on Advanced Computer Science Applications and Technologies (ACSAT 2015), 8th-10th Dec. 2015, Kuala Lumpur.

Khan, Ahsan Ali and Al Hazza, Muataz Hazza Faizi and Che Daud, Mohd Radzi and Mohamad Kamal, Nor Shahirah (2016) Optimization of surface quality of mild steel machined by wire EDM using simulated annealing algorithm. In: 2015 4th International Conference on Advanced Computer Science Applications and Technologies (ACSAT 2015), 8th-10th Dec. 2015, Kuala Lumpur.

Khalili, Amjad and Ismail, Md Yusof and Karim, A.N. Mustafizul and Che Daud, Mohd Radzi (2016) A critical assessment of prevailing models for measuring lean manufacturing. In: 6th International Conference on Industrial Engineering and Operations Management in Kuala Lumpur, IEOM 2016, 8th-10th March 2016, JW Marriott Hotel, Kuala Lumpur.

Che Daud, Mohd Radzi and Alies, Shamin Asyrani and Saleh, Norhayati (2011) Cost comparison analysis between strip to coil for support brake pedal at Suria Component (M) Sdn. Bhd. In: Design for manufacture: towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 92-97. ISBN 9789674181598

Che Daud, Mohd Radzi and Ramin, Ummi Huraizah (2011) Culture assessment on value based total performance assessment in Kulliyyah of Engineering of International Islamic University Malaysia. In: Manufacturing management from basic machining to quality product. IIUM Press, Kuala Lumpur, pp. 275-280. ISBN 9789674181659

Che Daud, Mohd Radzi and Mat Song, Rusdi (2011) Study the adherence of the values in the ISO 9001:2000 certified companies in Malaysia. In: Design for manufacture: towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 84-90. ISBN 9789674181598

Che Daud, Mohd Radzi and Abu Tahar, Khairul Adzha and Sulaiman, Mohd Rujhan (2011) The implementation of Total Quality Manangement (TQM) in Kuliyyah of Engineering, International Islamic University of Malaysia. In: Manufacturing management from basic machining to quality product. IIUM Press, Kuala Lumpur, pp. 269-274. ISBN 9789674181659

Ginta, Turnad Lenggo and Amin, A. K. M. Nurul and Che Daud, Mohd Radzi and Lajis, Mohd Amri (2009) Development of surface roughness models in end milling titanium alloy Ti-6Al-4V using uncoated tungsten carbide inserts. European Journal of Scientific Research, 28 (4). pp. 542-551. ISSN 1450-216X, 1450-202X

Lajis, Mohd Amri and Amin, A. K. M. Nurul and Karim, A.N. Mustafizul and Che Daud, Mohd Radzi and Ginta, Turnad Lenggo (2009) Hot machining of hardened steels with coated carbide inserts. American Journal of Engineering and Applied Sceices, 2 (2). pp. 421-427. ISSN 1941-7020

Ginta, Turnad Lenggo and Amin, A. K. M. Nurul and Lajis, Mohd Amri and Karim, A.N. Mustafizul and Che Daud, Mohd Radzi (2009) Improved tool life in end milling Ti-6A1-4V through workpiece preheating. European Journal of Scientific Research, 27 (3). pp. 384-391. ISSN 1450-216X, 1450-202X

Shuriye, Abdi Omar and Che Daud, Mohd Radzi and Mat Song, Rusdi and Ismail, Mohd Azhar (2009) Islamic values on ISO 9001-2000 certified companies in Malaysia. In: Religious and ethical worldviews on engineering standards. Islamic Centre for Education, Research and Development, Australia, pp. 105-177. ISBN 9890479

Lajis, Mohd Amri and Che Daud, Mohd Radzi and Amin, A. K. M. Nurul (2009) The implementation of Taguchi method on EDM process of Tungsten Carbide. European Journal of Scientific Research, 26 (4). pp. 609-617. ISSN 1450-216X , 1450-202X