Items where Author is "Buys, Yose Fachmi"

Article

Ahmad Shahrim, Nur’Aishah and Mohd Hafiz, Nur Nadia and Ahmad, Zuraida and Wong Azman, Amelia and Buys, Yose Fachmi and Sarifuddin, Norshahida (2022) Ink based on poly(3,4-ethylene dioxythiophene), poly(sulfonostyrene) and silver nanoparticles (PEDOT/PSS/SNP) blends for fabrics printing. Polimery, 67 (6). pp. 249-254. ISSN 0032-2725

Mohd Nordin, Nurfarahin and Anuar, Hazleen and Mohd Noor, Wan Nuradila Qistina and Buys, Yose Fachmi (2022) Experimental and simulation of supercritical carbon dioxide PLA biocomposite foamed. Materials Science Forum, 1056. pp. 17-23. ISSN 0255-5476 E-ISSN 1662-9752

Ahmad Shahrim, Nur'Aishah and Ahmad, Zuraida and Wong Azman, Amelia and Buys, Yose Fachmi and Sarifuddin, Norshahida (2021) Mechanisms for doped PEDOT:PSS electrical conductivity improvement. Materials Advances, 2 (22). pp. 7118-7138. ISSN 2633-5409

Anuar, Hazleen and Abd Rashid, Siti Munirah Salimah and Mohd Nordin, Nurfarahin and Ali, Fathilah and Buys, Yose Fachmi and Thomas, Sabu and Mohd Nasir, Nur Aimi and Mohd Asri, Syazeven Effatin Azma (2021) Potential of fabrication of durian skin fiber biocomposites for food packaging application through the electricity impact analysis. IIUM Engineering Journal, 22 (2). pp. 294-305. ISSN 1511-788X E-ISSN 2289-7860

Alshammari, Meshari F A F and Toha, Siti Fauziah and Anuar, Hazleen and Buys, Yose Fachmi (2021) Optimization of combined thermal power plant and performance analysis using matlab/simulink using real data: Kuwait as a case study. Asian Journal Of Electrical And Electronic Engineering, 1 (1). pp. 42-49. E-ISSN 2785-8189

AlRasheed, Khaled S. and Toha, Siti Fauziah and Anuar, Hazleen and Buys, Yose Fachmi (2021) Maximum power point tracking using light dependent resistor and dc motor for solar photovoltaic system in Kuwait. International Journal of Recent Technology and Engineering (IJRTE), 9 (5). pp. 222-228. E-ISSN 2277-3878

Othman, Maizatulnisa and Buys, Yose Fachmi and Shaffiar, Norhashimah and Jimat, Dzun Noraini and Syed Shaharuddin, Sharifah Imihezri (2021) Characterisation and production of Poly (Lactic/Acid)/poly (Ethylene Glycol) microfiber via melt drawn spinning process. IIUM Engineering Journal, 22 (1). pp. 201-212. ISSN 1511-788X E-ISSN 2289-7860

Ali, Nurfarahin and Anuar, Hazleen and Buys, Yose Fachmi and Ali, Fathilah and Thomas, Sabu and Mohd Nasir, Nur Aimi (2020) Effect of freeze-dried durian skin nanofiber on the physical properties of poly(lactic acid) biocomposites. Polymer Composite. ISSN 0272-8397 E-ISSN 1548-0569 (In Press)

Mohamed Haneef, Intan Najwa Humaira and Buys, Yose Fachmi and Shaffiar, Norhashimah and Haris, Nurul Assadiqah and Abdul Hamid, Abdul Malek and Syed Shaharuddin, Sharifah Imihezri (2020) Mechanical, morphological, thermal properties and hydrolytic degradation behavior of polylactic acid/polypropylene carbonate blends prepared by solvent casting. Polymer Engineering and Science, 60 (11). pp. 2876-2886. ISSN 0032-3888 E-ISSN 1548-2634

Buys, Yose Fachmi and Ahmad, Mimi Syakina and Anuar, Hazleen and Mahmud, Mudrikah Sofia and Mohd Nasir, Nur Aimi (2020) Mechanical properties, morphology and hydrolytic degradation behavior of polylactic acid / thermoplastic polyurethane blends. IIUM Engineering Journal, 21 (1). pp. 193-201. ISSN 1511-788X E-ISSN 2289-7860

Buys, Yose Fachmi and Ahmad, Mimi Syakina and Anuar, Hazleen and Mahmud, Mudrikah Sofia and Mohd Nasir, Nur Aimi (2020) Mechanical properties, morphology, and hydrolytic degradation behavior of poly lactic acid/thermoplastic polyurethane blends. IIUM Engineering Journal, 21 (1). pp. 193-201. ISSN 1511-788X E-ISSN 2289-7860

Anuar, Hazleen and Mohd Apandi, Siti Nur E’zzati and Abd. Rashid, Siti Munirah Salimah and Ali, Fathilah and Buys, Yose Fachmi and Manshor, Mohd Romainor and Thomas, Sabu and Mohd Nasir, Nur Aimi (2020) The effects of supercritical carbon dioxide on the degradation and antimicrobial properties of PLA biocomposite. IIUM Engineering Journal, 21 (1). pp. 212-227. ISSN 1511-788X E-ISSN 2289-7860

Mohamed Haneef, Intan Najwa Humaira and Shaffiar, Norhashimah and Buys, Yose Fachmi and Abdul Hamid, Abdul Malek (2019) Finite element analysis (FEA) of polylactic cid/polypropylene carbonate (PLA/PPC) blends fixation plate for craniomaxillofacial surgery. International Journal of Structural Integrity, 10 (5). pp. 678-691. ISSN 1757-9864

Abd. Rashid, Siti Munirah Salimah and Anuar, Hazleen and Mohd Apandi, Siti Nur E'zzati and Buys, Yose Fachmi (2018) Effect of UV radiation on degradation of durian skin fibre composite. International Journal of Engineering Materials and Manufacture, 3 (2). pp. 105-112.

Mohd Apandi, Siti Nur E’zzati and Anuar, Hazleen and Abd. Rashid, Siti Munirah Salimah and Buys, Yose Fachmi and Othman, Rashidi (2018) Effect of supercritical carbon dioxide on tensile Properties of Durian skin fibre biocomposite. International Journal of Current Science, Engineering & Technology, Special issue. pp. 197-202. E-ISSN 2581-4311

Mohd Apandi, Siti Nur E’zzati and Anuar, Hazleen and Buys, Yose Fachmi and Abd. Rashid, Siti Munirah Salimah and Ali, Fathilah and Manshor, Mohd Romainor (2018) Optimization of component in solution casted polylactic acid biocomposite by response surface methodology. Journal of Packaging Technology and Research, 2 (1). pp. 17-28. ISSN 2520-1034 E-ISSN 2520-1042

Buys, Yose Fachmi and Mawardi, Munirah Afiqah and Anuar, Hazleen (2018) Selective localization of multi-walled CNT in polylactic acid /thermoplastic polyurethane blends and its effect on mechanical properties. Current Nanomaterials, 2 (2). pp. 84-89. ISSN 2405-4615 E-ISSN 2405-4623

Buys, Yose Fachmi and Lokman, Nor Afiza Syafina (2015) Conductive polymer composites from polylactic acid/natural rubber filled with carbon black. Advanced Materials Research, 1115. pp. 253-257. ISSN 1022-6680

Mohamad, Souad A. and Buys, Yose Fachmi and Hadzari , Muhammad Hazwan and Othman, Maizatulnisa (2015) A light material for wind turbine blades. Advanced Materials Research, 1115. pp. 308-313. ISSN 1662-8985

Book Chapter

Ahmad Shahrim, Nur'Aishah and Ahmad, Zuraida and Masaad, Intan Seirra and Zamros, Nur Afiqah and Azman, Amelia Wong and Sarifuddin, Norshahida and Buys, Yose Fachmi (2022) Comparative studies on the electrical properties of PEDOT:PSS doped SNP films and hydrogels for medical electrode applications. In: Key Engineering Materials. Trans Tech Publications Ltd, pp. 43-49. ISBN 1013-9826 (ISSN)

Anuar, Hazleen and Ali, Fathilah and Buys, Yose Fachmi and Mohd Apandi, Siti Nur E'zzati and Abd. Rashid, Siti Munirah Salimah and Adli, Sarah Amalina (2019) Sustainable nanocomposites in food packaging. In: Sustainable polymer composites and nanocomposites. Springer Nature Switzerland, Switerland, pp. 413-436. ISBN 978-3-030-05398-7

Proceeding Paper

Mohd Nordin, Nurfarahin and Anuar, Hazleen and Buys, Yose Fachmi (2023) Effect of supercritical carbon dioxide pressure on foamed PolyLactic Acid biocomposite. In: 5th International Conference on Advances in Manufacturing and Materials Engineering, 9th - 10th August 2022, Kuala Lumpur, Malaysia.

Abd. Rashid, Siti Munirah Salimah and Anuar, Hazleen and Mohd Apandi, Siti Nur E'zzati and Buys, Yose Fachmi and Hassan, Noor Azlina (2019) Effects of plasticizer on mechanical properties of durian skin fiber reinforced polylactic acid biocomposite. In: International Conference on X-Rays and Related Techniques in Research and Industry 2018 (ICXRI 2018), 18th-19th August 2018, Kota Baharu, Kelantan.

Mohd Akhir, Nur Atiqah and Syed Shaharuddin, Sharifah Imihezri and Buys, Yose Fachmi and Othman, Maizatulnisa and Shaffiar, Norhashimah (2019) Characterization of poly (lactic acid) _ poly (ethylene) glycol blends prepared for melt drawn spinning process. In: 6th International Conference on Recent Advances in Materials, Minerals and Environment (RAMM) 2019, 27th-29th November 2018, Penang.

Nordin, N.M. and Buys, Yose Fachmi and Anuar, Hazleen and Ani, Mohd Hanafi and Pang, Ming Meng (2019) Development of conductive polymer composites from PLA/TPU blends filled with graphene nanoplatelets. In: 6th International Conference on Recent Advances in Materials, Minerals and Environment (RAMM), 27 - 29 Nov 2018, Batu Feringgi, Penang.

Ramlan, Amir Hakimi and Sirat, Mohd Shukri and Ismail, Edhuan and Buys, Yose Fachmi and Purwanto, Hadi and Mohd Mustafah, Yasir and Md Din, Muhammad Faiz and Ani, Mohd Hanafi (2019) Effects of hydrogen during annealing process of graphene synthesis via chemical vapor deposition. In: Nanotech Malaysia 2018 in conjunction with 3rd International Conference on Enabling Science and Nanotechnology (ESciNano 2018), 5th Malaysia Workshop on 2D Materials and Carbon Nanotube (2DMC 2018), 7th-9th May 2018, Kuala Lumpur.

Mahmuda, M.S. and Buys, Yose Fachmi and Anuara, H. and Sopyan, Lis (2019) Miscibility, morphology and mechanical properties of compatibilized polylactic acid/thermoplastic polyurethane blends. In: 6th International Conference on Recent Advances in Materials, Minerals and Environment, RAMM 2018, 27 - 29 November 2018, Penang.

Mohamed Haneef, Intan Najwa Humaira and Shaffiar, Norhashimah and Buys, Yose Fachmi and Abdul Hamid, Abd. Malek and Syed Shaharuddin, Sharifah Imihezri (2018) Morphologies and mechanical properties of polylactic acid / polypropylene carbonate (PLA/PPC) blends by solvent casting method. In: International Conference Biotechnology Engineering, ICBioE ‘18 September 19-20, 2018,, 19-20 September 2018, Kuala Lumpur, Malaysia.

Syed Shaharuddin, Sharifah Imihezri and Adnan, Muhammad Danial Afiq and Muhamad Khairussaleh, Nor Khairusshima and Mohd Shaffiar, Norhashimah and Buys, Yose Fachmi (2018) Effect of thermoplastic polyurethane (TPU) on the thermal and mechanical properties of polylactic acid (PLA)/ curcumin blends. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017), 8 - 9 August 2017, Kuala Lumpur, Malaysia.

Buys, Yose Fachmi and Aznan, Aisyah Nur Atiqah and Anuar, Hazleen (2018) Mechanical properties, morphology, and hydrolytic degradation behavior of polylactic acid / natural rubber blends. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8 - 9 August 2017, Kuala Lumpur, Malaysia.

Haneef, I.N.H.M. and Buys, Yose Fachmi and Shaffiar, Norhashimah and Syed Shaharuddin, Sharifah Imihezri and Muhamad Khairussaleh, Nor Khairusshima (2018) Miscibility, mechanical, and thermal properties of polylactic acid/polypropylene carbonate (PLA/PPC) blends prepared by melt-mixing method. In: 6th International Conference on Recent Advances in Materials, Minerals & Environment (RAMM 2018), 27th-29th November 2018, Penang, Malaysia.

Pang, Ming Meng and Koay, Seong Chun and Low, Jiun Hor and Buys, Yose Fachmi and Tshai, Kim Yeow (2018) Study on the plasticiser type for biobased microcrystalline cellulose filled polylactic acid composite. In: 5th International Conference on Process Engineering and Advanced Materials, ICPEAM 2018, 13th-14th August 2018, Kuala Lumpur.

Al-Bat’hia,, Souad A. M. and Buys, Yose Fachmi (2016) A Study on suitability of II-VI semiconductor /solid Polymer thin film junctions for Photovoltaic application. In: 5th International Advances In Applied Physics And Materials Science Congress And Exhibition, 16-19 April 2015, Turkey.

Buys, Yose Fachmi and Udin, Nur Suhaida (2015) Conductive polymer composites from polylactic acid/thermoplastic polyurethane filled with carbon black. In: The 4th Federation of Asian Polymer Societies - International Polymer Congress (4FAPS-IPC 2015), 5 - 8 October 2015, Kuala Lumpur, Malaysia. (Unpublished)

Buys, Yose Fachmi and Mohd Lazim, Nurul Hakimah (2015) Conductive polymer composites from plasticized polylactic acid/carbon black. In: Malaysia Polymer International Conference 2015 (MPIC 2015), 10th-11th June 2015, Putrajaya, Malaysia. (Unpublished)

Buys, Yose Fachmi and Lokman, Nor Afiza Syafina (2014) Conductive polymer composites from polylactic acid/Natural rubber filled with carbon black. In: International Conference on Advances in Manufacturing and Materials Engineering 2014 (ICAMME 2014), 23rd-25th Sept. 2014, Kuala Lumpur. (Unpublished)

Mohamad, Souad A. and Buys, Yose Fachmi and Hadzari , Muhammad Hazwan and Othman, Maizatulnisa (2014) A light material for wind turbine blades. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME’2014), 23rd-25th September 2014, Kuala Lumpur. (Unpublished)

Monograph

Buys, Yose Fachmi and Anuar, Hazleen (2018) Study on miscibility and degradation behavior of polylactic acid / thermoplastic polyurethane blends. Project Report. UNSPECIFIED. (Unpublished)

Buys, Yose Fachmi and Anuar, Hazleen (2018) Morphology and electrical properties of polylactide / natural rubber blend filled with conductive nano carbon. Research Report. UNSPECIFIED. (Unpublished)