Items where Author is "Banu, Asfana "

Hussin, Muhammad Shaffiq and Ali, Mohammad Yeakub and Banu, Asfana and Abdul Rahman, Mohamed and Chowdhury, Md. Sazzad Hossien (2020) Investigation of vibration in micromilling with MQL: S/N ratio analysis. TEST Engineering & Management, 83 (May-June). pp. 1026-1032. ISSN 0193-4120

Banu, Asfana and Ali, Mohammad Yeakub and Abd. Rahman, Mohamed and Konneh, Mohamed (2020) Stability of micro dry wire EDM: OFAT and DOE method: OFAT and DOE method. International Journal of Advanced Manufacturing Technology, 106 (9-10). pp. 4247-4261. ISSN 02683768

Banu, Asfana and Ali, Mohammad Yeakub and Abd Rahman, Md Nizam and Konneh, Mohamed (2019) Investigation of process parameters for stable micro dry wire electrical discharge machining. International Journal of Advanced Manufacturing Technology, 103 (1-4). pp. 723-741. ISSN 0268-3768 E-ISSN 1433-3015

Ali, Mohammad Yeakub and Banu, Asfana and Abd. Rahman, Mohamed and Hazza Faizi Al Hazza, Muataz and Adesta, Erry Yulian Triblas (2018) Precision control of kerf in metal cutting using dry micro WEDM: issues and challenges. In: 8th International Conference on Key Engineering Materials (ICKEM 2018), 16th-18th March 2018, Osaka, Japan.

Ali, Mohammad Yeakub and Sabur, Abdus and Banu, Asfana and Maleque, Md. Abdul and Adesta, Erry Yulian Triblas (2018) Micro electro discharge machining of nonconductive ceramic. International Journal of Engineering Materials and Manufacture, 3 (1). pp. 55-62. E-ISSN 0128-1852

Ali, Mohammad Yeakub and Banu, Asfana and Salehan, Muhammad and Adesta, Erry Yulian Triblas and Hazza Faizi Al Hazza, Muataz and Shaffiq, Muhammad (2018) Dimensional accuracy in dry micro wire electrical discharge machining. Journal of Mechanical Engineering and Sciences, 12 (1). pp. 3321-3329. ISSN 2289-4659 E-ISSN 2231-8380

Ali, Mohammad Yeakub and Banu, Asfana and Bakar, Mazilah Abu (2018) Influence of Wire Electrical Discharge Machining (WEDM) process parameters on surface roughness. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017), 8th–9th August 2017, Kuala Lumpur.

Ali, Mohammad Yeakub and Maleque, Md. Abdul and Banu, Asfana and Sabur, Abdus and Debnath, Sujan (2018) Micro electro discharge machining of non-conductive ceramic. In: 8th International Conference on Manufacturing Science and Technology (ICMST 2017), 23rd-25th July 2017, Hong Kong, China.

Chowdhury, Ahmed Ghalib Khan and Ali, Mohammad Yeakub and Banu, Asfana (2018) Analysis of corner radius in dry micro WEDM. International Journal of Mechanical Engineering and Robotics Research. pp. 1-4. ISSN 2278-0149 (In Press)

Ali, Mohammad Yeakub and Banu, Asfana and Shaffiq, Muhammad and Abd. Rahman, Mohamed and Konneh, Mohamed and Salehan, Muhammad (2018) Investigation of taper angle in dry micro wire EDM. International Journal of Mechanical Engineering and Robotics Research. pp. 1-4. E-ISSN 2278-0149 (In Press)

Ali, Mohammad Yeakub and Banu, Asfana and Hazza Faizi Al Hazza, Muataz and Adesta, Erry Yulian Triblas (2017) Present and future research trend in electro discharge machining. In: 3rd International Conference on Mechanical, Industrial and Materials Engineering 2017 (ICMIME2017), 28th-30th Dec. 2017, Rajshahi.

Banu, Asfana and Bakar, Mazilah Abu and Ali, Mohammad Yeakub and Adesta, Erry Yulian Triblas (2017) Analysis of WEDM process parameters on surface roughness and kerf using Taguchi method. International Journal of Engineering Materials and Manufacture, 2 (4). pp. 103-109. E-ISSN 0128-1852

Banu, Asfana and Shuriye, Abdi Omar (2017) Contributions of Muslim scholars attributed to other scholars in engineering and medicine. International Journal of Applied Science and Technology, 7 (3). pp. 45-50. ISSN 2221-0997 E-ISSN 2221-1004

Banu, Asfana and Shuriye, Abdi Omar (2017) Contributions of Muslim scholars attributed to other scholars in optics. American International Journal of Contemporary Research, 7 (3). pp. 9-15. ISSN 2162-139X E-ISSN 2162-142X

Ali, Mohammad Yeakub and Abd. Rahman, Mohamed and Zunairi, Siti Nur Zuhaida and Banu, Asfana (2017) Dimensional accuracy of micro-electro discharge milling. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25th-27th July 2016, Kuala Lumpur, Malaysia.

Ali, Mohammad Yeakub and Khamarruzaman, Siti Nur Zalikha and Banu, Asfana (2017) Investigation of kerf in micro wire electro discharge machining. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25th-27th July 2016, Kuala Lumpur, Malaysia.

Abd. Rahman, Mohamed and Ali, Mohammad Yeakub and Rosli, Abdul Rahman Shah and Banu, Asfana (2017) Process capability of high speed micro end-milling of Inconel 718 with minimum quantity lubrication. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25th-27th July 2016, Kuala Lumpur, Malaysia.

Ali, Mohammad Yeakub and Jailani, Wan Norsyazila and Abd Rahman, Mohamed and Hassan, Muhammad Hasibul and Banu, Asfana (2017) Effect of minimum quantity lubrication on surface roughness in tool-based micromilling. IIUM Engineering Journal, 18 (1). pp. 147-154. ISSN 1511-788X E-ISSN 2289-7860

Mohammad, Yeakub Ali and Farhana, Sulaiman and Banu, Asfana and Mohamed, Abd. Rahman and Al Hazza, Muataz Hazza Faizi (2017) Investigation of accuracy in microdrilling with minimum quantity lubrication. In: 7th International Conference on Manufacturing Science and Technology (ICMST 2016), 16th-18th July 2016, Sarawak.

Banu, Asfana and Ali, Mohammad Yeakub (2016) Electrical discharge machining (EDM): A review. International Journal of Engineering Materials and Manufacture, 1 (1). pp. 3-10. E-ISSN 0128-1852

Ali , Mohammad Yeakub and Abd. Rahman, Mohamed and Banu, Asfana and Adnan, Shakira and Nadia, Fatin (2016) High aspect ratio micro-EDM drilling with nano surface finish. In: The Regional Conference on Science, Technology and Social Sciences 2014 (RCSTSS 2014), 23rd-25th Nov. 2014, Cameron Highland, Pahang.

Banu, Asfana and Ali, Mohammad Yeakub and Abd. Rahman, Mohamed (2014) Micro-electro discharge machining of nonconductive zirconia ceramic: investigation of MRR and recast layer hardness. The International Journal of Advanced Manufacturing Technology, 75 (1-4). pp. 257-267. ISSN 0268-3768 E-ISSN 1433-3015

Jaafar, Israd Hakim and Abdul Rahman, Nur Atiqah and Banu, Asfana and Mohammad , Yeakub Ali (2011) Focused ion beam micromachining: technology and application. In: Advanced Machining Process. IIUM Press, Kuala Lumpur, pp. 77-82. ISBN 9789674181628