Items where Author is "Baig, Muneer"

Article

Quadros, Jaimon D. and Khan, Sher Afghan and Mohin, Ma and Mogul, Yakub I. and Baig, Muneer and Aabid, Abdul (2024) Heat transfer of Ca (NO3)2‑KNO3 molten salt mixtures for austempering and martempering processes of steels. ACS Omega, 9 (15). pp. 17266-17275. E-ISSN 2470-1343

Shaikh, Abdul Aabid and Baig, Muneer and Hrairi, Meftah and Syed Mohamed Ali, Jaffar (2024) Effect of fiber orientation-based composite lamina on mitigation of stress intensity factor for a repaired plate: a finite element study. Frattura ed Integrita Strutturale, 18 (68). pp. 209-221. E-ISSN 1971-8993

Shaikh, Abdul Aabid and Raheman, Md Abdul and Hrairi, Meftah and Baig, Muneer (2024) Improving the performance of damage repair in thin-walled structures with analytical data and machine learning algorithms. Frattura ed Integrita Strutturale, 18 (68). pp. 310-324. E-ISSN 1971-8993

Quadros, Jaimon Dennis and Khan, Sher Afghan and Aabid, Abdul and Baig, Muneer (2023) Modeling and validation of base pressure for aerodynamic vehicles based on machine learning models. Computer Modeling in Engineering & Sciences, 137 (3). pp. 2331-2352. ISSN 1526-1492 E-ISSN 1526-1506

Iftekar, Syed Fouzan and Aabid, Abdul and Amir, Adibah and Baig, Muneer (2023) Advancements and limitations in 3D printing materials and technologies: a critical review. Polymers, 15 (11). pp. 1-23. ISSN 2073-4360

Turki, Al-Khalifa and Aabid, Abdul and Khan, Sher Afghan and Azami, Muhammad Hanafi and Baig, Muneer (2023) Response surface analysis of nozzle parameters at supersonic flow through microjets. Australian Journal of Mechanical Engineering, 21 (3). 1037 -1052. ISSN 1448-4846 E-ISSN 2204-2253

Parveez, Bisma and Jamal, Nur Ayuni and Maleque, Md. Abdul and Ahmad Azhar, Ahmad Zahirani and Mohd Zaki, Hafizah Hanim and Aabid, Abdul and Baig, Muneer (2023) Improvement in effectiveness of diamond in strengthening the porous aluminium composite. Journal of Materials Research and Technology, 25. pp. 25-37. ISSN 2238-7854

Parveez, Bisma and Jamal, Nur Ayuni Jamal and Maleque, Md. Abdul and Rozhan, Alya Naili and Aabid, Abdul and Baig, Muneer (2023) Optimizing the compressive properties of porous aluminum composites by varying diamond content, space holder size and content. Materials, 16 (3). pp. 1-19. ISSN 1996-1944

Aabid, Abdul and Baig, Muneer and Hrairi, Meftah (2023) Advanced composite materials for structural maintenance, repair, and control. Materials, 16 (2). pp. 1-3. ISSN 1996-1944

Husnina, Nur and Khan, Sher Afghan and Aabid, Abdul and Baig, Muneer and Shaiq, Istiyaq Mudassir (2023) Passive control of base pressure in a converging-diverging nozzle with area ratio 2.56 at mach 1.8. Fluid Dynamics and Manufacturing Process, 19 (3). pp. 569-577. ISSN 1555-256X E-ISSN 1555-2578

Parveez, Bisma and Jamal, Nur Ayuni Jamal and Aabid, Abdul and Baig, Muneer and Yusof, Farazila (2022) Experimental analysis and parametric optimization on compressive properties of diamond-reinforced porous Al composites. Materials, 16 (1). pp. 1-21. ISSN 1996-1944

Quadros, Jaimon Dennis and Nagpal, Chetna and Khan, Sher Afghan and Aabid, Abdul and Baig, Muneer (2022) Investigation of suddenly expanded flows at subsonic Mach numbers using an artificial neural networks approach. Plos one, 17 (10). pp. 1-28. ISSN 1932-6203

Shabana, Aysha and Crasta, Asha and Khan, Sher Afghan and Aabid, Abdul and Baig, Muneer (2022) Computation of stiffness and damping derivatives of an Ogive in a limiting case of mach number and specific heat ratio. Fluid Dynamics & Materials Processing, 23 (3). pp. 1-19. ISSN 1555-256X E-ISSN 1555-2578

Quadros, Jaimon Dennis and P, Suhas and Khan, Sher Afghan and Aabid, Abdul and Baig, Muneer and Mogul, Yakub I. (2022) Fuzzy-based prediction for suddenly expanded axisymmetric nozzle flows with microjets. Bulletin of the Polish Academy of Sciences: Technical Sciences, 70 (5). pp. 1-11. ISSN 2300-1917

Parveez, Bisma and Jamal, Nur Ayuni and Anuar, Hazleen and Ahmad Nor, Yusilawati and Aabid, Abdul and Baig, Muneer (2022) Microstructure and mechanical properties of metal foams fabricated via melt foaming and powder metallurgy technique: a review. Materials, 15 (15). pp. 1-27. ISSN 1996-1944

Abid, Abdul and Khan, Sher Afghan and Baig, Muneer (2022) Numerical analysis of a microjet-based method for active flow control in convergent-divergent nozzles with a sudden expansion duct. Fluid Dynamics & Material Processing, Special Issue (1). pp. 1-24. ISSN 1555-256X E-ISSN 1555-2578

Aabid, Abdul and Murtuza, Mohammed Ali and Khan, Sher Afghan and Baig, Muneer (2022) Optimization of dry sliding wear behavior of aluminum-based hybrid MMC's using experimental and DOE methods. Journal of Materials Research and Technology, 16 (1). pp. 743-763. ISSN 2238-7854

Zayan, Jalal Mohammed and Rasheed, Abdul Khaliq and John, Akbar and Khalid, Mohammad and Ismail, Ahmad Faris and Aabid, Abdul and Baig, Muneer (2021) Investigation on rheological properties of water-based novel ternary hybrid nanofluids using experimental and Taguchi method. Materials, 15 (1). E-ISSN 1996-1944

Aabid, Abdul and Khan, Sher Afghan and Afzal, Asif and Baig, Muneer (2021) Investigation of tiny jet locations effect in a sudden expansion duct for high-speed flow control using experimental and optimization methods. Meccanica, 56 (11). pp. 1-26. ISSN 0025-6455 E-ISSN 1572-9648

Jaimon, Dennis Quadros and Khan, Sher Afghan and Aabid, Abdul and Alam, Mohammad Shohag and Baig, Muneer (2021) Machine learning applications in modelling and analysis of base pressure in suddenly, expanded flows. Aerospace, 8 (318). pp. 1-23. ISSN 2226-4310

Aabid, Abdul and Khan, Sher Afghan and Baig, Muneer (2021) A critical review of supersonic flow control for high-speed applications. Applied Sciences, 11 (6899). pp. 1-26. ISSN 2076-3417