Items where Author is "Bahar, Rubina"

Article

Roslan, Muhamad Hafizuddin and Bahar, Rubina and Hilmy, Irfan (2019) Experimental investigation on fresh water production using air gap membrane distillation. International Journal of Engineering & Technology, 7 (6). pp. 229-234. ISSN 2277-3878

Ariff, Tasnim Firdaus and Zolkapli, Farah Farhana and Sapuan, Farah and Azhar, Ahmad Zahirani and Bahar, Rubina and Karim, A.N. Mustafizul and Amin, A. K. M. Nurul (2018) Enhancing tool life of hot isostatically pressed silicon nitride inserts in machining inconel 718 with different susceptors through hybrid microwave post sintering. International Journal of Engineering Research and Application, 8 (12 Part I). pp. 51-56. ISSN 2248-9622

Ariff, Tasnim Firdaus and Mohamed, Nur Maizatul Nasyiin and Binafif, Abdulaziz Abdullah and Azhar, Ahmad Zahirani and Bahar, Rubina and Karim, A.N. Mustafizul and Amin, A.K.M. Nurul (2018) Improvements in the development of silicon nitride inserts using hybrid microwave energy for machining Inconel 718. International Journal of Engineering Research & Technology (IJERT), 7 (10). pp. 244-247. ISSN 2278-0181

Mohd Ali, Afifah and Janal, Nurul Nabihah and Hamidon, Nor Ezzati and Ahmad Azhar, Ahmad Zahirani and Mokhtar, Suhaily and Bahar, Rubina and Ahmad, Zainal Arifin (2018) The relationship of cutting chip type, length and thickness to wear of Zirconia Toughened Alumina Added with Magnesium Oxide (ZTA-MgO) cutting tool. International Journal of Current Science, Engineering & Technology, 1 (Special Issue 1). pp. 452-457. ISSN 2581-4311

Mohamad, Norsalawani and Bahar, Rubina (2016) Minimum Quantity Lubrication (MQL) and its effect on tool wear during miniature drilling: an experimental study. International Journal of Engineering Materials and Manufacture (IJEMM), 1 (2). pp. 65-70. E-ISSN 0128-1852

Perves Bappy, Mohammad Jabed and Bahar, Rubina and Ariff, Tasnim Firdaus (2016) Effect of air gap in the performance of AGMD system. ARPN Journal of Engineering and Applied Sciences, 11 (6). 4087 -4093. ISSN 1819-6608

Bahar, Rubina and Yahya, Nur Adilah and Ariff, Tasnim Firdaus (2015) Design and development of a versatile ice clamping system. Advanced Materials Research, 1115. pp. 535-538. ISSN 1662-8985

Ariff, Tasnim Firdaus and Iqbal, Mohammad and Bahar, Rubina (2015) Cost analysis of using hybrid microwave post-sintered silicon nitride inserts. Advanced Materials Research, 1115. pp. 192-195. ISSN 1022-6680

Bahar, Rubina and Hawlader, Mohammad Nurul Alam and Mohamed Ariff, Tasnim Firdaus (2015) Channeled coolant plate: a new method to enhance freshwater production from an air gap membrane distillation (AGMD) desalination unit. Desalination, 359. pp. 71-81. ISSN 0011-9164

Bahar, Rubina and Hawlader, Mohammad Nurul Alam and Ariff, Tasnim Firdaus (2015) Effect of coolant plate geometry and material in a freshwater production system: an experimental study. Advanced Materials Research, 1115. pp. 468-471. ISSN 1022-6680

Mohamed Ariff, Tasnim Firdaus and Azmi , Mohamad Asyraf and Bahar, Rubina (2014) Economic analysis of using e-glass composite wrap repair system for pipelines in Malaysia. Australian Journal of Basic and Applied Sciences, 8 (15). pp. 241-245. ISSN 1991-8178

Bahar, Rubina and Hawlader, Mohammad Nurul Alam and Ng, K. C. and Yee, Jiun Haw (2014) Experimental study on a multi-stage air gap membrane distillation (AGMD) unit. Jurnal Teknologi, 69 (9). pp. 89-92. ISSN 2180–3722 (O), 0127–9696 (P)

Bahar, Rubina and Hawlader, Mohammad Nurul Alam (2012) Study of falling film evaporation process in a vapor compression desalination system. Desalination and Water Treatment, 39 (1-3). pp. 21-32. ISSN 1944-3994 (O), 1944-3986 (P)

Hawlader, Mohammad Nurul Alam and Bahar, Rubina and Kim, Choon Ng and Loh , Jian Wei Stanley (2012) Transport analysis of an air gap membrane distillation (AGMD) process. Desalination and Water Treatment, 42 (1-3). pp. 333-346. ISSN 1944-3994 (O), 1944-3986 (P)

Bahar, Rubina and Hawlader, Mohammad Nurul Alam and Liang, Song Woei (2004) Performance evaluation of a mechanical vapor compression desalination system. Desalination, 166 (1-3). pp. 123-127. ISSN 0011-9164

Bahar, Rubina and Hawlader, Mohammad Nurul Alam and Woei, Liang Song (2004) Performance evaluation of a mechanical vapor compression desalination system. Desalination, 166. pp. 123-127. ISSN 0011-9164

Book Chapter

Saleh, Tanveer and Bahar, Rubina (2020) ELID grinding for final finishing operation. In: Advances in abrasive based machining and finishing processes. Materials Forming, Machining and Tribology . Springer Nature, Switzerland, pp. 129-145. ISBN 978-3-030-43311-6

Saleh, Tanveer and Bahar, Rubina (2019) Near net shape machining by Micro-EDM and Micro-WEDM. In: Micro-electrical Discharge Machining Processes Technologies and Applications. Springer, Singapore, pp. 231-264. ISBN 978-981-13-3073-5

Saleh, Tanveer and Bahar, Rubina (2017) ELID grinding and EDM for finish machining. In: Comprehensive materials finishing. Reference module in materials science and materials engineering, 1 . Elsevier Inc., pp. 364-407. ISBN 978-0-12-803249-7

Ariff, Tasnim Firdaus and Jalil, Muhammad Ezurin and Bahar, Rubina (2014) Design improvements in the inner shell of a motorbike helmet using coconut fiber composite. In: Handbook on emerging trends in scientific research. PAK publishing group, Singapore, pp. 59-65. ISBN 978-969-9952-07-4

Proceeding Paper

Ariff, Tasnim Firdaus and Ahmad Azhar, Ahmad Zahirani and Sariff, Mohamad Nuresyam and Rasid, S.N. and Zahari, S.Z. and Bahar, Rubina and Karim, A.N. Mustafizul and Amin, A. K. M. Nurul (2018) Optimizing the synthesis of alumina inserts using hot isostatic pressing (HIP). In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017), 8th–9th August 2017, Kuala Lumpur, Malaysia.

Yusof, M. Q.M. and Harun, H. N.S.B. and Bahar, Rubina (2018) Experimental investigation of minimum quantity lubrication in meso-scale milling with varying tool diameter. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8th-9th August 2017, International Islamic University Malaysia (IIUM), Gombak Campus, Kuala Lumpur.

Perves Bappy, Mohammad Jabed and Bahar, Rubina and Ibrahim, Shaliza and Mohamed Ariff, Tasnim Firdaus (2017) Enhanced freshwater production using finned-plate air gap membrane distillation (AGMD). In: 2016 International Symposium on Civil and Environmental Engineering, ISCEE 2016, 5-6 December 2016, Novotel Melaka,.

Ariff, Tasnim Firdaus and Azhar, Ahmad Zahirani and Sariff, Mohamad Nuresyam and Rasid, Syufiqa Nurfatin and Zahari, Siti Zulaikha and Bahar, Rubina and Karim, A.N. Mustafizul and Amin, A. K. M. Nurul (2017) Optimizing the synthesis of alumina inserts using hot isostatic pressing (HIP). In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017), 8-9 August 2017, Kuala Lumpur, Malaysia.

Ariff, Tasnim Firdaus and Tukiman, Nurul Hannah Atikah and Bahar, Rubina (2016) Design improvements in underground watering system for small local farming industries. In: Joint Conference of 2nd International Manufacturing Engineering Conference, iMEC 2015 and 3rd Asia-Pacific Conference on Manufacturing Systems, APCOMS 2015;, 12-14 Nov 2015, Kuala Lumpur.

Perves Bappy, Mohammad Jabed and Bahar, Rubina and Ariff, Tasnim Firdaus (2015) 2-Dimensional heat and mass transfer analysis of condensation on channeled coolant plate in air gap membrane distillation (AGMD) freshwater production system. In: 2nd International Conference on Desalination Using Membrane Technology, 26th-29th July 2015, Singapore Expo Convention and Exhibition Centre, Singapore. (Unpublished)

Bahar, Rubina and Yahya, Nur Adilah and Mohamed Ariff, Tasnim Firdaus (2014) Design and development of a versatile ice clamping system. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME2014), 23rd-25th September 2014, Kuala Lumpur. (Unpublished)

Bahar, Rubina and Hawlader, Mohammad Nurul Alam and Mohamed Ariff, Tasnim Firdaus (2014) Effect of coolant plate geometry and material in a freshwater production system: an experimental study. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2014), 23th-25th September 2014, Kuala Lumpur. (Unpublished)

Bahar, Rubina and Hawlader, Mohammad Nurul Alam (2013) Desalination: conversion of seawater to freshwater. In: 2nd International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2013), 2nd-4th July 2013, Kuala Lumpur, Malaysia.

Hawlader, Mohammad Nurul Alam and Bahar, Rubina and Ng, K. C. and Loh, Jian Wei Stanley (2011) Transport analysis of an Air Gap Membrane Distillation (AGMD) process. In: Qingdao International Conference 2011---on Desalination and Water Reuse, June 20-23, 2011, Qingdao, China. (Unpublished)

Monograph

Ariff, Tasnim Firdaus and Azhar, Ahmad Zahirani and Bahar, Rubina and Karim, A.N. Mustafizul and Amin, A. K. M. Nurul (2018) Enhancing tool life with the development of silicon nitride based inserts for high speed machining of Inconel 718 using hybrid microwave sintering. Research Report. UNSPECIFIED. (Unpublished)

Bahar, Rubina and Ariff, Tasnim Firdaus and Ismail, Yusof (2017) Investigation of polarization in membrane distillation (MD) process and its energy efficient solution for freshwater production in Malaysian households. Project Report. UNSPECIFIED. (Unpublished)

Bahar, Rubina and Ariff, Tasnim Firdaus (2016) Enhanced freshwater production from waste/brackish/saline water in remote arid areas using specially designed coolant plates. Project Report. UNSPECIFIED, Kuala Lumpur. (Unpublished)