Items where Author is "Ariff, Tasnim Firdaus"

Article

Ariff, Tasnim Firdaus and Al-Qwairi, Osamah Omar (2020) Mechanical and structural properties of the butt welded joint in high strength structural steel (ST52-3) using gas metal arc welding and oxyfuel gas welding. TEST Engineering and Management, 83 (May – June 2020). 1446 -1450. ISSN 0193-4120

Ariff, Tasnim Firdaus and Zolkapli, Farah Farhana and Sapuan, Farah and Azhar, Ahmad Zahirani and Bahar, Rubina and Karim, A.N. Mustafizul and Amin, A. K. M. Nurul (2018) Enhancing tool life of hot isostatically pressed silicon nitride inserts in machining inconel 718 with different susceptors through hybrid microwave post sintering. International Journal of Engineering Research and Application, 8 (12 Part I). pp. 51-56. ISSN 2248-9622

Ariff, Tasnim Firdaus and Mohamed, Nur Maizatul Nasyiin and Binafif, Abdulaziz Abdullah and Azhar, Ahmad Zahirani and Bahar, Rubina and Karim, A.N. Mustafizul and Amin, A.K.M. Nurul (2018) Improvements in the development of silicon nitride inserts using hybrid microwave energy for machining Inconel 718. International Journal of Engineering Research & Technology (IJERT), 7 (10). pp. 244-247. ISSN 2278-0181

Amin, A. K. M. Nurul and Begum, Mst. Nasima and Fathiah, Noor and Konneh, Mohamed and Ariff, Tasnim Firdaus (2016) An experimental approach to determine the critical depth of cut in brittle-to-ductile phase transition during end milling of soda lime glass. Arabian Journal for Science and Engineering, 41 (11). pp. 4553-4562. ISSN 1319-8025 E-ISSN 2191-4281

Perves Bappy, Mohammad Jabed and Bahar, Rubina and Ariff, Tasnim Firdaus (2016) Effect of air gap in the performance of AGMD system. ARPN Journal of Engineering and Applied Sciences, 11 (6). 4087 -4093. ISSN 1819-6608

Bahar, Rubina and Yahya, Nur Adilah and Ariff, Tasnim Firdaus (2015) Design and development of a versatile ice clamping system. Advanced Materials Research, 1115. pp. 535-538. ISSN 1662-8985

Ariff, Tasnim Firdaus and Iqbal, Mohammad and Bahar, Rubina (2015) Cost analysis of using hybrid microwave post-sintered silicon nitride inserts. Advanced Materials Research, 1115. pp. 192-195. ISSN 1022-6680

Iqbal, Mohammad and Ariff, Tasnim Firdaus and Mat Roseh, Mohd Shahrul Fahmi and Al Hazza, Muataz Hazza Faizi and Hilmy, Irfan and -, Suryanto (2015) Effect of microwave sintering treatment to the flank wear of titanium carbide tools in milling operations. Advanced Materials Research, 1115. pp. 59-63. ISSN 1022-6680

Bahar, Rubina and Hawlader, Mohammad Nurul Alam and Ariff, Tasnim Firdaus (2015) Effect of coolant plate geometry and material in a freshwater production system: an experimental study. Advanced Materials Research, 1115. pp. 468-471. ISSN 1022-6680

Ariff, Tasnim Firdaus and Jusoh, Muhd. Fahmi Baihaqi and Parnin , Malek and Azenan, Mohd. Hanif (2013) Design improvements and fabrication of conveyor belt cleaner and washing system at Westports Malaysia. International Journal of Education and Research, 1 (10). pp. 11-26. ISSN 2201-6333 (Print) ISSN: 2201-6740 (Online)

Ariff, Tasnim Firdaus and Gabbitas, Brian Leslie and Zhang, Deliang (2009) The effect of powder sintering method on the densification and microstructure of pewter alloys. IOP Conference Series: Materials Science and EngineeringEmail alert RSS feed, 4 (1). pp. 1-5. ISSN 1757-8981

Book

Rahman, Mustafizur and Adesta, Erry Yulian Triblas and Ali, Mohammad Yeakub and Karim, A. N. Mustafizul and Maleque, Md. Abdul and Anuar, Hazleen and Ariff, Tasnim Firdaus and Iqbal, Mohammad and Samat, Noorasikin and Hassan, Noor Azlina, eds. (2012) Advances in manufacturing and materials engineering. Advanced Materials Research, 576 . Trans Tech Publications Ltd., , Switzerland. ISBN 978-3-03785-498-3

Book Chapter

Ariff, Tasnim Firdaus and Azmi, Muhammad Firdaus and Iqbal, Mohammad (2014) Cost analysis of using hybrid microwave post-sintered aluminium oxide inserts. In: Handbook on emerging trends in scientific research. PAK publishing group, Singapore, pp. 53-58. ISBN 9789699952074

Ariff, Tasnim Firdaus and Jalil, Muhammad Ezurin and Bahar, Rubina (2014) Design improvements in the inner shell of a motorbike helmet using coconut fiber composite. In: Handbook on emerging trends in scientific research. PAK publishing group, Singapore, pp. 59-65. ISBN 978-969-9952-07-4

Proceeding Paper

Ariff, Tasnim Firdaus and Zakaria, Azriena Nathasa (2023) Mechanical and structural properties of epoxy bio-composite using fish bones as bio-filler. In: 5th International Conference on Advances in Manufacturing and Materials Engineering, ICAMME 2022, 9-10 August 2022, KualaLumpur.

Johar, Firdaus and Ariff, Tasnim Firdaus (2022) Mechanical and microstructural properties of hybrid bio-composites using microwaved coconut fibre and rice husk. In: 2nd International Conference on Recent Trends in Applied Research, ICoRTAR 2021, 8-9 October 2021, Online.

Ariff, Tasnim Firdaus and Ahmad Azhar, Ahmad Zahirani and Sariff, Mohamad Nuresyam and Rasid, S.N. and Zahari, S.Z. and Bahar, Rubina and Karim, A.N. Mustafizul and Amin, A. K. M. Nurul (2018) Optimizing the synthesis of alumina inserts using hot isostatic pressing (HIP). In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017), 8th–9th August 2017, Kuala Lumpur, Malaysia.

Ariff, Tasnim Firdaus and Azhar, Ahmad Zahirani and Sariff, Mohamad Nuresyam and Rasid, Syufiqa Nurfatin and Zahari, Siti Zulaikha and Bahar, Rubina and Karim, A.N. Mustafizul and Amin, A. K. M. Nurul (2017) Optimizing the synthesis of alumina inserts using hot isostatic pressing (HIP). In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017), 8-9 August 2017, Kuala Lumpur, Malaysia.

Ariff, Tasnim Firdaus and Tukiman, Nurul Hannah Atikah and Bahar, Rubina (2016) Design improvements in underground watering system for small local farming industries. In: Joint Conference of 2nd International Manufacturing Engineering Conference, iMEC 2015 and 3rd Asia-Pacific Conference on Manufacturing Systems, APCOMS 2015;, 12-14 Nov 2015, Kuala Lumpur.

Perves Bappy, Mohammad Jabed and Bahar, Rubina and Ariff, Tasnim Firdaus (2015) 2-Dimensional heat and mass transfer analysis of condensation on channeled coolant plate in air gap membrane distillation (AGMD) freshwater production system. In: 2nd International Conference on Desalination Using Membrane Technology, 26th-29th July 2015, Singapore Expo Convention and Exhibition Centre, Singapore. (Unpublished)

Iqbal, Mohammad and Ariff, Tasnim Firdaus and Fahmi, Shahrul and Al Hazza, Muataz Hazza Faizi and Hilmy, Irfan and Suryanto, - (2014) Effect of microwave sintering treatment to the flank wear of titanium carbide tools in milling operations. In: IIUM Engineering Congress : 3rd International Conference on Mathematical Application in Engineering 2014, 23rd - 25th September 2014, Kuala Lumpur.

Ariff, Tasnim Firdaus and Ahmed, Shamsuddin (2005) Making the lean manufacturing supply chain leap across small and medium scale industries (SMIs) in Malaysia. In: International Conference on Recent Advances in Mechanical & Material Engineering (ICRAMME 2005), 6-7 June 2005, Kuala Lumpur.

Ariff, Tasnim Firdaus and Ahmed, Shamsuddin (2005) The development of strategies for lean operations in SMIs. In: International Conference on Recent Advances in Mechanical & Material Engineering (ICRAMME 2005), 30 - 31 May 2005, Kuala Lumpur.

Monograph

Ariff, Tasnim Firdaus and Azhar, Ahmad Zahirani and Bahar, Rubina and Karim, A.N. Mustafizul and Amin, A. K. M. Nurul (2018) Enhancing tool life with the development of silicon nitride based inserts for high speed machining of Inconel 718 using hybrid microwave sintering. Research Report. UNSPECIFIED. (Unpublished)

Bahar, Rubina and Ariff, Tasnim Firdaus and Ismail, Yusof (2017) Investigation of polarization in membrane distillation (MD) process and its energy efficient solution for freshwater production in Malaysian households. Project Report. UNSPECIFIED. (Unpublished)

Bahar, Rubina and Ariff, Tasnim Firdaus (2016) Enhanced freshwater production from waste/brackish/saline water in remote arid areas using specially designed coolant plates. Project Report. UNSPECIFIED, Kuala Lumpur. (Unpublished)