Items where Author is "Anuar, Hazleen"
 | Up a level |
Article
Alli, Yakubu Adekunle and Anuar, Hazleen and Manshhor, Mohd Romainor and Okafor, Christian Emeka and Kamarulzaman, Amjad Fakhri and Akcakale, Nurettin and Mohd Nazeri, Fatin Nurafiqah and Bodaghi, Mahdi and Suhr, Jonghwan and Mohd Nasir, Nur Aimi (2024) Optimization of 4D/3D printing via machine learning: a systematic review. Hybrid Advances. E-ISSN 2773-207X
Johari, Maizatul Akmal and Ali, Fathilah and Azmi, Azlin Suhaida and Anuar, Hazleen and Jamaluddin, Jamarosliza and Hasham, Rosnani (2024) Microencapsulation of Acalypha indica Linn. Extracts using chitosan-polycaprolactone blends. Pertanika Journal of Science & Technology, 32 (2). pp. 741-760. ISSN 0128-7680 E-ISSN 2231-8526
Alli, Yakubu Adekunle and Bamisaye, Abayomi and Nancy, Parvathy and Zachariah, Suji Mary and Oladoye, Peter and Bankole, Owolabi Mutolib and Akamo, Damilola O. and Chkirida, Soulaima and Anuar, Hazleen and Thomas, Sabu (2024) MXene composites: properties, synthesis and its emerging application in rechargeable batteries. Journal of Energy Storage, 77. pp. 1-21. ISSN 2352-152X E-ISSN 2352-1538
Alli, Yakubu Adekunle and Oladoye, Peter Olusakin and Matebese, Funeka and Senehi, Naomi L. and Alimi, Oyekunle Azeez and Ogunlaja, Adeniyi Sunday and Abdi, Fatwa F. and Anuar, Hazleen and Adeleye, Adeyemi S. and Philippot, Karine (2023) Step-scheme photocatalysts: promising hybrid nanomaterials for optimum conversion of CO2. Nano Today, 53 (1). pp. 1-30. ISSN 1748-0132 E-ISSN 1878-044X
Alli, Yakubu Adekunle and Anuar, Hazleen and Manshor, Mohd Romainor and Bankole, Owolabi Mutolib and Abd Rahman, Nurul Amirah and Olatunde, Simeon Kayowa and Omotola, Elizabeth Oyinkansola and Oladoye, Peter Olusakin and Ejeromedoghene, Onome and Suhr, Jonghwan and Sukindar, Nor Aiman and Mohd Nasir, Nur Aimi (2023) Influence of nanocomposites in extrusion-based 3D printing: a review. Hybrid Advances, 3. pp. 1-10. ISSN 2773-207X
Yakubu Adekunle, Alli and Peter Olusakin, Oladoye and Abdulmujeeb T., Onawole and Anuar, Hazleen and Sheriff, Adewuyi and Olutobi Daniel, Ogunbiyi and Karine, Philippot (2023) Photocatalysts for CO2 reduction and computational insights. Fuel, 344. pp. 1-18. ISSN 0016-2361 E-ISSN 1873-7153
Manshor, Mohd Romainor and Alli, Yakubu Adekunle and Anuar, Hazleen and Ejeromedoghene, Onome and Omotola, Elizabeth Oyinkansola and Suhr, Jonghwan (2023) 4D printing: historical evolution, computational insights and emerging applications. Materials Science and Engineering: B, 295 (September 2023). pp. 1-11. ISSN 0921-5107 E-ISSN 1873-4944
Alli, Yakubu Adekunle and Oladoye, Peter Olusakin and Onawole, Abdulmujeeb T. and Anuar, Hazleen and Adewuyi, Sheriff and Ogunbiyi, Olutobi Daniel and Philippot, Karine (2023) Photocatalysts for CO2 reduction and computational insights. Fuel, 344. pp. 1-18. ISSN 0016-2361 E-ISSN 1873-7153
Anuar, Hazleen and Abd Rahman, Nurul Amirah and Manshor, Mohd Romainor and Alli, Yakubu Adekunle and Alimi, Oyekunle Azeez and Alif, Fathilah and Suhr, Jonghwan (2023) Novel soda lignin/PLA/EPO biocomposite: a promising and sustainable material for 3D printing filament. Materials Today Communications, 35. pp. 1-14. ISSN 2352-4928
Azahari, Nur Najma Athirah and Anuar, Hazleen and Hassan, Azman and Jawaid, Mohammed and Halim, Zahurin and Samsudin, Sani Amril (2023) Thermal, dynamic mechanical, mechanical and flammability properties of halloysite nanotubes filled polyamide 11 nanocomposites. Malaysian Journal of Fundamental and Applied Sciences, 19 (2). pp. 173-193. ISSN 2289-5981 E-ISSN 2289-599X
Anuar, Hazleen (2023) “Communiversity”: Students and community members work together for better environment. Asia Research News. (Unpublished)
Anuar, Hazleen and Yakubu Adekunle, Alli (2023) A call to action: building sustainable environment for the people and the planet. e-estidotmy: memperkaya minda dengan STEM.
Al-Daas, Aseel and Azmi, Azlin Suhaida and Ali, Fathilah and Anuar, Hazleen (2023) The effect of alkaline treatment to pseudo-stem banana fibers on the performance of polylactic acid/ banana fiber composite. Journal of Natural Fibers, 20 (1). pp. 1-13. ISSN 1544-0478 E-ISSN 1544-046X
Mohd Razali, Nur Izzati and Ali, Fathilah and Azmi, Azlin Suhaida and Anuar, Hazleen and Jamaluddin, Jamarosliza (2022) Polyurethane: green chemistry synthesis, application and biodegradability - a review. Journal of Polymer Science and Technology, 7 (1). pp. 13-30. ISSN 2550-1917
Khalit, Muhammad Ilham and Hurtis, Roger Ashley and Khidhir, Basim A. and Anuar, Hazleen (2022) Harvesting electrical energy from automatic sliding doors use. Advanced Engineering Forum, 47. pp. 29-41. ISSN 2234-9898 E-ISSN 2234-991X
Sukindar, Nor Aiman and Md Azhar, Muhammad Afif and Ani, Mohd. Hanafi and Anuar, Hazleen and Kamaruddin, Shafie and Syed Shaharuddin, Sharifah Imihezri and Triblas Adesta, Erry Yulian (2022) A short review on the effect of nozzle geometry in 3D printing process using FDM system. ASEAN Journal of Engineering and Technology (AJET), 2 (2). pp. 1-4. E-ISSN 2710-5471
Alli, Yakubu Adekunle and Adewuyi, Sheriff and Bada, Babatunde Saheed and Thomas, Sabu and Anuar, Hazleen (2022) Quaternary trimethyl chitosan chloride capped bismuth nanoparticles with positive surface charges: catalytic and antibacterial activities. Journal of Cluster Science, 33 (5). pp. 2311-2324. ISSN 1040-7278 E-ISSN 1572-8862
Parveez, Bisma and Jamal, Nur Ayuni and Anuar, Hazleen and Ahmad Nor, Yusilawati and Aabid, Abdul and Baig, Muneer (2022) Microstructure and mechanical properties of metal foams fabricated via melt foaming and powder metallurgy technique: a review. Materials, 15 (15). pp. 1-27. ISSN 1996-1944
Anuar, Hazleen and Toha, Siti Fauziah (2022) Bahan percetakan 4D yang mesra alam untuk revolusi industri 4.0. e-estidotmy, 15 Mar 2022.
Mohd Nordin, Nurfarahin and Anuar, Hazleen and Mohd Noor, Wan Nuradila Qistina and Buys, Yose Fachmi (2022) Experimental and simulation of supercritical carbon dioxide PLA biocomposite foamed. Materials Science Forum, 1056. pp. 17-23. ISSN 0255-5476 E-ISSN 1662-9752
Pairon, Mohammad Shahrizad and Ali, Fathilah and Ahmad, Farah and Anuar, Hazleen and Abdul Rahman, Nurul Amirah and Mirghani, Mohamed Elwathig Saeed and Suhr, Jonghwan and Thomas, Sabu (2022) Review on solvent extraction methods of Lignin from Oil Palm Empty Fruit Bunches (OPEFB). Journal of Natural Fibers. ISSN 1544-0478 E-ISSN 1544-046X (In Press)
Pairon, Mohammad Shahrizad and Abdul Rahman, Nurul Amirah and Ali, Fathilah and Anuar, Hazleen and Suhr, Jonghwan (2022) Characterization of dioxane-based and soda-based extraction of lignin from oil palm empty fruit bunches as reinforcement in polylactic acid bio-composite. Bioresource Technology Reports, 20. ISSN 2589014X
Aziz, Shujahadeen and Ali, Fathilah and Anuar, Hazleen and Ahamad, Tansir and Kareem, Wrya O. and Brza, Mohamad A. and Kadir, MFZ and Abu Ali, Ola A and Saleh, Dalia and Asnawi, ASFM and Hadi, Jihad M. and Alshehri, Said M (2021) Structural and electrochemical studies of proton conducting biopolymer blend electrolytes based on MC:Dextran for EDLC device application with high energy density. Alexandria Engineering Journal. pp. 1-13. ISSN 1110-0168 E-ISSN 2090-2670 (In Press)
Adekunle Alli, Yakubu and Adewuyi, Sheriff and Saheed Bada, Babatunde and Sabu Thomas, Sabu and Anuar, Hazleen (2021) Quaternary Trimethyl Chitosan Chloride Capped Bismuth Nanoparticles with Positive Surface Charges: Catalytic and Antibacterial Activities. Journal of Cluster Science.
Anuar, Hazleen and Abd Rashid, Siti Munirah Salimah and Mohd Nordin, Nurfarahin and Ali, Fathilah and Buys, Yose Fachmi and Thomas, Sabu and Mohd Nasir, Nur Aimi and Mohd Asri, Syazeven Effatin Azma (2021) Potential of fabrication of durian skin fiber biocomposites for food packaging application through the electricity impact analysis. IIUM Engineering Journal, 22 (2). pp. 294-305. ISSN 1511-788X E-ISSN 2289-7860
Abd Rahman, Nurul Amirah and Anuar, Hazleen and Mohd. Nordin, Nurfarahin and Mohd Asri, Syazeven Effatin Azma and Ali, Fathilah and Suhr, Jonghwan (2021) Mechanical and thermal properties of polylactic acid filled lignin powder biocomposite filaments with epoxidized palm oil for sustainable 3d printing application. Perintis eJournal, 11 (1). pp. 23-39. E-ISSN 2232-0725
Anuar, Hazleen and Brza, Mohamad Ali and Aziz, Shujahadeen B. and Ali, Fathilah and Dannoun, Elham M.A. and Saeed, Salah Raza and Mohammed, Sewara J. and Abdulwahid, Rebar T. (2021) Green coordination chemistry as a novel approach to fabricate polymer:Cd (II)-complex composites: Structural and optical properties. Optical Materials, 116. pp. 1-12. ISSN 0925-3467
Alshammari, Meshari F A F and Toha, Siti Fauziah and Anuar, Hazleen and Buys, Yose Fachmi (2021) Optimization of combined thermal power plant and performance analysis using matlab/simulink using real data: Kuwait as a case study. Asian Journal Of Electrical And Electronic Engineering, 1 (1). pp. 42-49. E-ISSN 2785-8189
Brza, Mohamad A. and Aziz, Shujahadeen and Anuar, Hazleen and Ali, Fathilah and Abdulwahid, Rebar T. and Hadi, Jihad M. (2021) Electrochemical impedance spectroscopy as a novel approach to investigate the influence of metal complexes on electrical properties of poly (vinyl alcohol)(PVA) composites. International Journal of Electrochemical Science, 16. pp. 1-21. ISSN 1452-3981
AlRasheed, Khaled S. and Toha, Siti Fauziah and Anuar, Hazleen and Buys, Yose Fachmi (2021) Maximum power point tracking using light dependent resistor and dc motor for solar photovoltaic system in Kuwait. International Journal of Recent Technology and Engineering (IJRTE), 9 (5). pp. 222-228. E-ISSN 2277-3878
Brza, Mohamad A. and Aziz, Shujahadeen and Anuar, Hazleen and Alshehri, Saad M and Ali, Fathilah and Ahamad, Tansir and Hadi, Jihad M. (2021) Characteristics of a Plasticized PVA-Based Polymer Electrolyte Membrane and H+ Conductor for an Electrical Double-Layer Capacitor: Structural, Morphological, and Ion Transport Properties. Membranes, 11 (4). p. 296. ISSN 2077-0375
Pairon, Mohammad Shahrizad and Ali, Fathilah and Anuar, Hazleen (2021) Degradation study of polylactic acid, spirulina, and alginate composites in cosmetic application. Biological And Natural Resources Engineering Journal, 5 (1). pp. 45-52. E-ISSN 2637-0719
Samat, Noorasikin and Sulaiman, Muhammad Afnan and Ahmad, Zuraida and Anuar, Hazleen (2021) A comparative study on the desiccant effect of polypropylene and polylactic acid composites reinforced with different lignocellulosic fibres. Journal of Applied Science and Engineering, 24 (2). pp. 223-231. ISSN 2708-9975
Ali, Nurfarahin and Anuar, Hazleen and Buys, Yose Fachmi and Ali, Fathilah and Thomas, Sabu and Mohd Nasir, Nur Aimi (2020) Effect of freeze-dried durian skin nanofiber on the physical properties of poly(lactic acid) biocomposites. Polymer Composite. ISSN 0272-8397 E-ISSN 1548-0569 (In Press)
Ali, Mohamad A. and Aziz, Shujahadeen and Anuar, Hazleen and Ali, Fathilah and Dannoun, Elham M.A and Mohammed, Sewara J. and Abdulwahid, Rebar T. and Al-Zangana, Shakhawan (2020) Tea from the drinking to the synthesis of metal complexes and fabrication of PVA based polymer composites with controlled optical band gap. Scientific Reports, 10 (1). pp. 1-17. E-ISSN 2045-2322
Ahmad Saidi, Muhammad Akmal and Hassan, Azman and Wahit, Mat Uzir and Choy, Lai Jau and Anuar, Hazleen (2020) Thermal, dynamic mechanical analysis and mechanical properties of polybutylene terephthalate/polyethylene terephthalate blends. Jurnal Teknologi (Sciences & Engineering), 82 (5). pp. 73-83. E-ISSN 2180–3722
Brza, Mohamad A. and Aziz, Shujahadeen and Anuar, Hazleen and Dannoun, Elham M.A and Ali, Fathilah and Abdulwahid, Rebar T. and Al-Zangana, Shakhawan and Kadir, Mohd F. Z. (2020) The study of EDLC device with high electrochemical performance fabricated from proton ion conducting PVA-based polymer composite electrolytes plasticized with glycerol. Polymers, 12 (9). pp. 1-25. ISSN 2073-4360
Brza, Mohamad A. and Aziz, Shujahadeen and Anuar, Hazleen and Ali, Fathilah (2020) Structural, ion transport parameter and electrochemical properties of plasticized polymer composite electrolyte based on PVA: a novel approach to fabricate high performance EDLC devices. Polymer Testing, In press, pre-proof. pp. 1-65. ISSN 0142-9418 (In Press)
Brza, Mohamad A. and Shujahadeen, Aziz and Anuar, Hazleen and Ali, Fathilah and Hamsan, M.H and Kadir, M.F.Z and Abdulwahid, Rebar T. (2020) Metal framework as a novel approach for the fabrication of electric double layer capacitor device with high energy density using plasticized Poly(vinyl alcohol): Ammonium Thiocyanate based Polymer Electrolyte. Arabian Journal of Chemistry, 13 (8). ISSN 1878-5352
Adli, Sarah Amalina and Ali, Fathilah and Azmi, Azlin Suhaida and Anuar, Hazleen and Mohd Nasir, Nur Aimi and Hasham, Rosnani and Hafiz Idris, Mohamad Khairul (2020) Development of biodegradable cosmetic patch using a polylactic acid/phycocyanin–alginate composite. Polymers, 12 (8). pp. 1-11. E-ISSN 2073-4360
Mohamad, Nur Lisa Farhana and Ali, Fathilah and Azmi, Azlin Suhaida and Barre, Mohamed Soleiman and Anuar, Hazleen and Jamaluddin, Jamarosliza (2020) Enhanced flexibility of polylactic acid/epoxidized palm oil/pineapple fiber composites. Biological And Natural Resources Engineering Journal, 3 (1). pp. 1-7. E-ISSN 2637-0719
Barre, Mohamed Soleiman and Ali, Fathilah and Mirghani, Mohamed Elwathig Saeed and Nordin, Noor Faizul Hadry and Anuar, Hazleen and Nasir, Nur Aimi (2020) Potential food additive of Boswellia carterii essential oil encapsulated within gum Arabic: a particle size distribution and zeta potential analysis. Food Research, 4 (Supplementary 2). pp. 19-23. E-ISSN 2550-2166
Anuar, Hazleen (2020) Durian skin biocomposite for take-out containers and 3D printing. Asia Research News, 27th Jan. 2020.
Buys, Yose Fachmi and Ahmad, Mimi Syakina and Anuar, Hazleen and Mahmud, Mudrikah Sofia and Mohd Nasir, Nur Aimi (2020) Mechanical properties, morphology and hydrolytic degradation behavior of polylactic acid / thermoplastic polyurethane blends. IIUM Engineering Journal, 21 (1). pp. 193-201. ISSN 1511-788X E-ISSN 2289-7860
Buys, Yose Fachmi and Ahmad, Mimi Syakina and Anuar, Hazleen and Mahmud, Mudrikah Sofia and Mohd Nasir, Nur Aimi (2020) Mechanical properties, morphology, and hydrolytic degradation behavior of poly lactic acid/thermoplastic polyurethane blends. IIUM Engineering Journal, 21 (1). pp. 193-201. ISSN 1511-788X E-ISSN 2289-7860
Anuar, Hazleen and Mohd Apandi, Siti Nur E’zzati and Abd. Rashid, Siti Munirah Salimah and Ali, Fathilah and Buys, Yose Fachmi and Manshor, Mohd Romainor and Thomas, Sabu and Mohd Nasir, Nur Aimi (2020) The effects of supercritical carbon dioxide on the degradation and antimicrobial properties of PLA biocomposite. IIUM Engineering Journal, 21 (1). pp. 212-227. ISSN 1511-788X E-ISSN 2289-7860
Omar, Mohamad Firdaus and Mohamad, Nuriah and Azmi, Azlin Suhaida and Ali, Fathilah and Anuar, Hazleen and Mohd Nasir, Nur Aimi (2020) Chemical and rheological properties effects from different parameters in horizontal agitator bead mill process on sulfur dispersion. International Journal of Advanced Science and Technology, 29 (9s). pp. 1665-1672. ISSN 2005-4238 E-ISSN 2207-6360
Asraf, Nur Heena and Adli, Sarah Amalina and Barre, Mohamed Soleiman and Ali, Fathilah and Anuar, Hazleen (2019) Degradation properties of biodegradable polymers. Journal of Wastes and Biomass Management (JWBM), 1 (2). 05-08. ISSN 2710-6012
Brza, Mohamad A. and Aziz, Shujahadeen and Anuar, Hazleen and Al Hazza, Muataz Hazza Faizi (2019) From green remediation to polymer hybrid fabrication with improved optical band gaps. International Journal of Molecular Sciences, 20 (16). pp. 1-23. ISSN 1661-6596 E-ISSN 1422-0067
Adli, Sarah Amalina and Ali, Fathilah and Azmi, Azlin Suhaida and Anuar, Hazleen and Hasham, Rosnani (2019) Biodegradable polymer composite for cosmetic patch. Biological and Natural Resources Engineering Journal (BNREJ), 2 (2). pp. 49-64. E-ISSN 2637-0719
Awale, Raina Jama and Ali, Fathilah and Azmi, Azlin Suhaida and Mohamad Puad, Noor Illi and Anuar, Hazleen and Hassan, Azman (2018) Enhanced flexibility of biodegradable polylactic acid/starch blends using epoxidized palm oil as plasticizer. Polymers, 10 (9). pp. 1-12. ISSN 2073-4360
Abd. Rashid, Siti Munirah Salimah and Anuar, Hazleen and Mohd Apandi, Siti Nur E'zzati and Buys, Yose Fachmi (2018) Effect of UV radiation on degradation of durian skin fibre composite. International Journal of Engineering Materials and Manufacture, 3 (2). pp. 105-112.
Mohd Apandi, Siti Nur E'zzati and Anuar, Hazleen and Abd. Rashid, Siti Munirah Salimah (2018) Environmental degradation of durian skin nanofibre biocomposite. IIUM Engineering Journal, 19 (1). pp. 223-236. ISSN 1511-788X E-ISSN 2289-7860
Jamal, Nur Ayuni and Othman, Maizatulnisa and Anuar, Hazleen and Yusof, Farazila and Ahmad Nor, Yusilawati and Khalid, Khalisanni and Zakaria, Muhamad Nazarudin (2018) Preliminary development of porous aluminum via powder metallurgy technique. Materialwissenschaft und Werkstofftechnik, 49 (4). pp. 460-466. ISSN 0933-5137
M. A., Siti Nur E’zzati and Anuar, Hazleen and Y.F., Buys and A. R., Siti Munirah Salimah and Ali, Fathilah and M. R., Manshor (2018) Optimization of component in solution casted polylactic acid biocomposite by response surface methodology. Journal of Packaging Technology and Research, 2 (1). pp. 17-28. ISSN 2520-1034 E-ISSN 2520-1042
Abd. Rashid, Siti Munirah Salimah and Anuar, Hazleen and Hassan, Noor Azlina and Mohd Apandi, Siti Nur E'zzati and Ali, Fathilah and Manshhor, Mohd Romainor (2018) Thermal stability of plasticized durian skin fibre biocomposite. International Journal of Current Science, Engineering & Technology, 1 (Special Issue 1). pp. 447-451. ISSN 2581-4311
Mohd Apandi, Siti Nur E’zzati and Anuar, Hazleen and Abd. Rashid, Siti Munirah Salimah and Buys, Yose Fachmi and Othman, Rashidi (2018) Effect of supercritical carbon dioxide on tensile Properties of Durian skin fibre biocomposite. International Journal of Current Science, Engineering & Technology, Special issue. pp. 197-202. E-ISSN 2581-4311
Mohd Apandi, Siti Nur E’zzati and Anuar, Hazleen and Buys, Yose Fachmi and Abd. Rashid, Siti Munirah Salimah and Ali, Fathilah and Manshor, Mohd Romainor (2018) Optimization of component in solution casted polylactic acid biocomposite by response surface methodology. Journal of Packaging Technology and Research, 2 (1). pp. 17-28. ISSN 2520-1034 E-ISSN 2520-1042
Anuar, Hazleen and Mohd Apandi, Siti Nur E'zzati and Abu Bakar, Nur Fatin Izzati and Syed Mustafa, Sharifah Nurul Inani and Abd. Rashid, Siti Munirah Salimah and Ali, Fathilah (2018) Physical and functional properties of durian skin fiber biocomposite films filled with natural antimicrobial agents. BioResources, 13 (4). pp. 7255-7269. ISSN 1930-2126
Buys, Yose Fachmi and Mawardi, Munirah Afiqah and Anuar, Hazleen (2018) Selective localization of multi-walled CNT in polylactic acid /thermoplastic polyurethane blends and its effect on mechanical properties. Current Nanomaterials, 2 (2). pp. 84-89. ISSN 2405-4615 E-ISSN 2405-4623
Anuar, Hazleen and Abu Bakar, Nur Fatin Izzati and Syed Mustafa, Sharifah Nurul Inani and Mohd Apandi, Siti Nur E’zzati and Abd Rashid, Siti Munirah Salimah and Ali, Fathilah and Manshir, Mohd. Romainor (2017) Impregnation of cinnamon essential oil into plasticised polylactic acid biocomposite film for active food packaging. Journal of Packaging Technology and Research, 1 (3). pp. 149-156. ISSN 2520-1034 E-ISSN 2520-1042
Ali, Fathilah and Jama Awale, Raina and Fakhruldin, Hanan and Anuar, Hazleen (2016) Plasticizing poly(lactic acid) using epoxidized palm oil for environmental friendly packaging material = Peningkatan fleksibiliti poli(laktik asid) menggunakan minyak kelapa sawit terepoksi untuk aplikasi pembungkus mesra alam. Malaysian Journal of Analytical Sciences, 20 (5). pp. 1153-1158. ISSN 1394-2506
., Avicenna and Jimat, Dzun Noraini and Mohd Salleh, Hamzah and Anuar, Hazleen (2016) Effect of fungal pretreatment by Aspergillus niger assisted by ultrasonication on microfibrillated cellulose obtained from cocoa pod husk. Journal of Advanced Research in Material Sciences, 21 (1). pp. 1-13. ISSN 2289-7992
Jamal, Nur Ayuni and Ai Wen, Tan and Yusof, Farazila and Katsuyoshi, Kondoh and Hisashi, Imai and Anuar, Hazleen (2016) Fabrication and compressive properties of low to medium porosity closed-cell porous aluminum using PMMA space holder technique. Materials, 9 (4). pp. 254-1. ISSN 1996-1944
Ali, Fathilah and Awale, Raina Jama and Mirghani, Mohamed Elwathig Saeed and Anuar, Hazleen and Samat, Noorasikin (2016) Preparation and characterization of plasticized polylactic acid/starch blend. Jurnal Teknologi, 78 (11-2). pp. 7-12. E-ISSN 2180–3722
Lutpi, Husniyah Aliyah and Anuar, Hazleen and Mohamed, Mohd Ambri and Mohd. Salit, Sapuan (2016) Potential of irradiated high density polyethylene/ethylene propylene rubber-carbon nanotube nanocomposite as shoe sole. Proceedings of the Institution of Mechanical Engineers, Part P: Journal of Sports Engineering and Technology, 230 (2). pp. 100-110. ISSN 1754-3371
Anuar, Hazleen and Razali, Mohd Syafiq and Saidin, Hafizul Adzim and Badrul Hisham, Ammelia Fazlina and Mohd Apandi, Siti Nur E’zzati and Ali, Fathilah (2016) Tensile properties of durian skin fibre reinforced plasticized polylactic acid biocomposites. International Journal of Materials and Manufacture [IJEMM], 1 (1). pp. 16-20. E-ISSN 0128-1852
Shaffiar, Norhashimah and Hasnan, M.A. and Anuar, Hazleen and Al Hazza, Muataz Hazza Faizi (2015) Finite element analysis of HDPE/EPR-CNT nanocomposite under tensile loading. Advanced Materials Research, 1115. pp. 410-413. ISSN 1022-6680
M. N. Nur, Aimi and Anuar, Hazleen and S. M., Nurhafizah and S., Zakaria (2015) Effects of dilute acid pretreatment on chemical and physical properties of kenaf biomass. Journal of Natural Fibers, 12 (3). pp. 256-264. ISSN 1544-046X (O), 1544-0478 (P)
Zulkifli, Nur Izzati and Samat, Noorasikin and Anuar, Hazleen and Zainuddin, Norhazlin (2015) Mechanical properties and failure modes of recycled polypropylene/microcrystalline cellulose composites. Materials and Design, 69. pp. 114-123. ISSN 0261-3069
Lutpi, Husniyah Aliyah and Anuar, Hazleen and Mohd Shaffiar , Norhashimah (2015) Effect of nanofiller on flexing mechanism of HDPE/EPR nanocomposite for sport shoe sole application. Advanced Materials Research, 1115. pp. 382-385. ISSN 1022-6680
Anuar, Hazleen and Mohd Nasir,, Nur Aimi and El-Shekeil, Yousuf (2015) Effects of coupling agent on the properties of durian skin fibre filled polypropylene composite. International Journal of Chemical, Molecular, Nuclear, Materials and Metallurgical Engineering, 9 (12). pp. 1261-1265.
Shaffiar, Norhashimah and Abdul Halim, Mohamad Khairi and Anuar, Hazleen and Majid, M. A. H. A. (2015) Finite element analysis of tensile test for HDPE/EPR-MMT nanocomposite. Advanced Materials Research, 1115. pp. 414-417. ISSN 1022-6680
Khalit, Muhammad Ilham and Anuar, Hazleen and Mohd Shaffiar, Norhashimah (2015) Flexing test of HDPE/EPR filled CNT radiated nanocomposites for sport shoe soles. Materials Testing, 57. 904 -908. ISSN 0025-5300
Khalid, Muhammad Ilham and Anuar, Hazleen and Shaffiar, Norhashimah and Yaacob, Iskandar Idris and Mohd. Salit, Sapuan (2015) Matrix cracking in reinforced polymer nanocomposites: a review. Journal of Advanced Review on Scientific Research, 11 (1). pp. 13-36. ISSN 2289-7887
Mohd Nasir, Nur Aimi and Anuar, Hazleen and Mel, Maizirwan and Mohd Salit, Sapuan and Wahit, Mat Uzir and Zakaria, Sarani (2015) Preparation of durian skin nanofibre (DSNF) and its effect on the properties of polylactic acid (PLA) biocomposites = Penyediaan nano-serabut kulit durian (DSNF) dan kesannya ke atas sifat biokomposit asid polilaktik (PLA). Sains Malaysiana, 44 (11). pp. 1551-1559. ISSN 0126-6039
Nainar, S. Mohammed and Begum, Shahida and Ansari, M.N.M. and Anuar, Hazleen (2014) Tensile properties and morphological studies on HA/PLA biocomposites for tissue engineering scaffolds. International Journal of Engineering Research, 3 (3). pp. 186-189. ISSN 2319 - 6890 (O), 2347 - 5013 (P)
Anuar, Hazleen and Aimi, N. Nur and Manshor, M.R. and Wan Nazri, W.B. and Mohd Salit, Sapuan (2014) Optimizing the parameters in durian skin fiber reinforcedpolypropylene composites by response surface methodology. Industrial Crops and Products, 54. pp. 291-295. ISSN 0926-6690
Kaiser, Mohammad Rejaul and Abdul Razak, Shamsul Bahri and Anuar, Hazleen (2014) Improvement in thermomechanical properties of injection molded nano-modified hybrid biocomposite. Journal of Thermoplastic Composite Materials, 27 (7). pp. 992-1009. ISSN 0892 - 7057
Manshor, M.R. and Anuar, Hazleen and Mohd Nasir, Nur Aimi and M.I, Ahmad Fitrie and Wan Busu, Wan Nazri and Sapuan, S. M. and El-Shekeil, Y.A and Wahit, M.U (2014) Mechanical, thermal and morphological properties of durian skin fibre reinforced PLA biocomposites. Materials and Design, 59. pp. 279-286. ISSN 0261-3069
Aliyah, L. Husniyah and Anuar, Hazleen (2014) Potential of electron beam irradiated hdpe/epr blend as shoes sole. Movement, Health & Exercise, 3. pp. 49-56. ISSN 2231-9409
Jamal, N. A. and Farazila, Y. and Ramesh, S. and Anuar, Hazleen (2014) Role of mechanical alloying parameters on powders distribution of Al/Cu alloy and Al/Cu composite. Materials Research Innovations, 18 (6). SD-190. ISSN 1433-075X
Mohd Nasir, Nur Aimi and Anuar, Hazleen and Mel, Maizirwan and Othman, Rashidi and Mohamed, Nurhafizah Seeni and Mohd Ithnin, Ahmad Fitrie and Uyup, Mohd Khairun Anwar (2014) Study of chemical and thermal properties of kenaf biomass-based polylactic acid (PLA). Advances in Environmental Biology, 8 (3 Spec. Issue). pp. 633-638. ISSN 1995-0756 E-ISSN 1998-1066
Kaiser, Mohammad Rejaul and Anuar, Hazleen and Razak, S.B.A. (2013) Ductile-brittle transition temperature of polylactic acid-based biocomposite. Journal of Thermoplastic Composite Materials, 26 (2). pp. 216-226. ISSN 0892-7057
Kaiser, Mohammad Rejaul and Anuar, Hazleen and Samat, Noorasikin and Abdul Razak, Shamsul Bahri (2013) Effect of processing routes on the mechanical, thermal and morphological properties of PLA-based hybrid biocomposite. Iranian Polymer Journal (English Edition), 22 (2). pp. 123-131. ISSN 1026-1265
Mohamed Ariff, Tasnim Firdaus and Sabiyah, Mohamad Yazid and Adam, Mohd Amirul and Nor, Mohd Anuar (2012) Eco-friendly machining of T6061 aluminium alloy using titanium carbonitride (TiCN) coated tools. Advanced Materials Research, 576. pp. 675-678. ISSN 1022-6680
M.I, Ahmad Fitrie and Anuar, Hazleen and Mohd Nordin, Nur Aisyah and Mohd Nasir, Nur Aimi and Seeni Mohamed, Nurhafizah and Mel, Maizirwan and Othman, Rashidi and Abd Razak, Shamsul Bahri (2012) Characterization on surface modification of kenaf biomass via microbial fermentation. Advanced Materials Research, 576. pp. 268-271. ISSN 1022-6680
Lutpi, Husniyah Aliyah and Anuar, Hazleen and Surip, Siti Norasmah and Bonnia, Noor Najmi (2012) Evaluation of elastic modulus and hardness of polylactic acid-based biocomposite by nano-indentation. Advanced Materials Research, 576. pp. 446-449. ISSN 1022-6680
Hassan, Noor Azlina and Hassan, Norita and Ahmad, Sahrim and Rasid, Rozaidi and Anuar, Hazleen and Bonnia, Noor Najmi and Surip, Siti Norasmah (2012) Physical and mechanical properties of Thermoplastic Natural Rubber (TPNR) nanocomposites. Advanced Materials Research, 576. pp. 394-397. ISSN 1022-6680
Jamal, Nur Ayuni and Anuar, Hazleen and Hassan, Noor Azlina and Abd Razak, Shamsul Bahri (2012) Thermogravimetric analysis of OMMT filled HDPE/EPDM treated EB irradiation. Advanced Materials Research, 576. pp. 362-365. ISSN 1022-6680
Ahmad, Zuraida and Yusof, Yusliza and Omar, Nurihan and Anuar, Hazleen and Halim, Zahurin and Samat, Noorasikin (2012) Properties of montmorillonite-reinforced thermoplastic sago starch composites. Advanced Materials Research, 445. pp. 469-474. ISSN 1022-6680
Kaiser, Mohammad Rejaul and Anuar, Hazleen and Abd. Razak, Shamsul (2012) Dynamic mechanical behaviour of Poly Ethylene Glycol Plasticized Polylacticacid. Advanced Materials Research, 576. pp. 224-227. ISSN 1022-6680
Mohd Nasir, Nur Aimi and Mustafa Kamalbahrin, Mohd Adlan and Seeni Mohamed, Nurhafizah and M.I, Ahmad Fitrie and Anuar, Hazleen and Mel, Maizirwan and Othman, Rashidi (2012) Evaluation of maximum percentage glucose conversion for dilute acid hydrolysis of kenaf biomass using statistical analysis. Advanced Materials Research, 576. pp. 244-247. ISSN 1022-6680
Anuar, Hazleen and Ahmad, Zuraida and Kovacs, J. G. and Tabi, T. (2012) Improvement of Mechanical Properties of Injection-Molded Polylactic Acid–Kenaf Fiber Biocomposite. Journal of Thermoplastic Composite Materials, 25 (2). pp. 153-164. ISSN 0892 - 7057
Nainar, S.M. and Begum, S. and Hasan, Z. and Ansari, M.N.M. and Anuar, Hazleen (2012) Influence of Maleic anhydride on mechanical properties and morphology of Hydroxyapatite/Poly-(lactic acid) composites. Regenerative Research, 1 (2). pp. 32-38. ISSN 2232-0822
Bonnia, Noor Najmi and Ahmad, S. H. and Surip, Siti Norasmah and Nurul, S. S. and Hassan, Noorazlina and Anuar, Hazleen (2012) Mechanical properties and environmental stress cracking resistance of rubber toughened polyester/clay composite. Advanced Materials Research, 576. pp. 318-321. ISSN 1022-6680
Manshor, R.M and Anuar, Hazleen and Wan Busu, Wan Nazri and M.I, Ahmad Fitrie (2012) Preparation and characterization of physical properties of Durian skin fibers biocomposite. Advanced Materials Research, 576. pp. 212-215. ISSN 1022-6680
Seeni Mohamed, Nurhafizah and Anuar, Hazleen and Mel, Maizirwan and Othman, Rashidi and Mohd Norddin, Nur Aisyah and Mohd Nasir, Nur Aimi (2012) Production of lactic acid from kenaf core hydrolysate by rhizopus oryzae FTCC 5215. Advanced Materials Research, 576. pp. 248-251. ISSN 1022-6680
Wan Jaafar, Wan Nor Raihan and Surip, S. N. and Azmi, Nur Naziha and Bonnia, N. N. and Anuar, Hazleen and H. Noor, Azlina and Abd. Razak, S. B. (2012) Thermal properties of PLA/kenaf green nanocomposite: Effect of chemi-mechanical treatment. Advanced Materials Research, 576. pp. 342-344. ISSN 1662-8985
Ahmad, Zuraida and Yusof, Yusliza and Anuar, Hazleen and R., Mohd Khairul Muhaimin (2012) The effect of water and citric acid on sago starch bio-plastics. International Food Research Journal, 19 (2). pp. 715-719. ISSN 19854668 (P), 22317546 (O)
Mohd Nasir, Nur Aimi and Mustafa Kamalbahrin, Mohd Adlan and Mohamed, Nurhafizah Seeni and Anuar, Hazleen and Mel, Maizirwan and Othman, Rashidi (2011) Effect of Rhizopus Oryzae Fermentation on Kenaf-based Polylactic Acid’s Monomer. IIUM Engineering Journal, 12 (4). pp. 83-87. ISSN 1511-788X
Jamal, Nur Ayuni and Anuar, Hazleen and Abd Razak, Shamsul Bahri (2011) Effects of MAPE and EB irradiation techniques on the mechanical properties of crosslinked rubber toughened nanocomposites. Journal of Rubber Research, 14 (4). pp. 200-215. ISSN 1511-1768
Anuar, Hazleen and Hassan, N. A. and Mohd Fauzey, F. (2011) Compatibilized PP/EPDM-kenaf fibre composite using melt blending method. Advanced Materials Research, 264. pp. 743-747. ISSN 1022-6680
Jamal, Nur Ayuni and Anuar, Hazleen and Abd Razak , Shamsul Bahri (2011) The effects of high energy radiation on the tensile properties of rubber toughened nanocomposites. Advanced Materials Research, 264. pp. 765-770. ISSN 1022-6680
Anuar, Hazleen and Jamal, Nur Ayuni and Abd Razak, Shamsul Bahri (2011) Effects of high energy radiation on mechanical properties of PP/EPDM nanocomposite. Advanced Materials Research, 264. pp. 738-742. ISSN 1022-6680
Jamal, Nur Ayuni and Anuar, Hazleen and Abd Razak, Shamsul Bahri (2011) Enhancing the mechanical properties of cross-linked rubber-toughened nanocomposites via electron beam Irradiation. Journal of Nanotechnology. ISSN 1687-9503
Anuar, Hazleen and Ahmad, Zuraida and Balint, Morlin and Jozsef Gabor, Kovacs (2011) Micromechanical property investigations of poly(lactic acid)-kenaf fiber biocomposites. Journal of Natural Fibers, 8 (1). pp. 14-26. ISSN 1544-046X (O), 1544-0478 (P)
Anuar, Hazleen and Ahmad, Zuraida (2011) Improvement in mechanical properties of reinforced thermoplastic elastomer composite with kenaf bast fibre. Composites: Part B: Engineering, 42. pp. 462-465. ISSN 1359-8368
Jamal, N.A. and Anuar, Hazleen and Razak, S.B.A. (2011) Modification of tensile and impact properties of crosslinked rubber toughened nanocomposites via electron beam irradiation. Canadian Journal on Scientific & Industrial Research, 2 (3). pp. 95-101.
Jamal, Nur Ayuni and Anuar, Hazleen and Abd Razak, Shamsul Bahri (2011) The influence of EB-irradiated treatment on enhancing barrier property and crystallization behavior of rubber-toughened nanocomposites. Journal of Nanotechnology, 2011. 8 pg.. ISSN 1687-9503 (P), 1687-9511 (O)
Ahmad, Zuraida and Anuar, Hazleen and Halim, Zahurin and Abang Haji Abdul Majid, Dayang Laila and Md Yusof, Fauziah (2011) Cotton reinforced biopolymer matrix composite: effect of ultraviolet (UV) on its mechanical properties. Key Engineering Materials, 472-72. pp. 928-932. ISSN 1013-9826
Anuar, Hazleen and Kiaser, M. R. and Razak, S.B.A . (2011) Ductile-brittle transition temperature of polylactic acid-based biocomposite. Journal of Thermoplastic Composite Materials, 26 (2). pp. 216-226. ISSN 0892 - 7057
Jamal, Nur Ayuni and Anuar, Hazleen and Abd Razak, Shamsul Bahri (2011) Effect of electron beam irradiation (EB) on gas barrier property of HDPE/EPDM nanocomposites. Key Engineering Materials, 471. pp. 775-780. ISSN ISSN: 1013-9826
Anuar, Hazleen and Ahmad, Zuraida and Morlin, B. and Kovacs, J. G. (2011) Interfacial shear strength of Polylactic Acid-Kenaf fibre biocomposites. Key Engineering Materials, 471. pp. 781-785. ISSN ISSN: 1013-9826
Anuar, Hazleen and Ahmad, Zuraida (2011) Thermal properties of injection moulded polylactic acid 13 kenaf fibre biocomposite. Malaysian Polymer Journal, 6 (1). pp. 51-57. ISSN 1823-7789
Ahmad, Zuraida and Anuar, Hazleen and Yusof, Yusliza (2011) The study of biodegradable thermoplastics sago starch. Key Engineering Materials, 471. pp. 397-402. ISSN 1013-9826
Jamal, Nur Ayuni and Anuar, Hazleen and Abdul Razak, Shamsul Bahri (2010) A linear relationship between the tensile, thermal and gas barrier properties of mape modified rubber toughened nanocomposites. IIUM Engineering Journal, 11 (2). pp. 225-239. ISSN 1511-788X
Wan Busu, Wan Nazri and Anuar, Hazleen and Ahmad, Sahrim and Rasid, Rozaidi and Jamal, Nur Ayuni Jamal (2010) The mechanical and physical properties of thermoplastic natural rubber hybrid composites reinforced with hibiscus cannabinus, L and short glass fiber. Polymer-Plastics Technology and Engineering, 49 (13). pp. 1315-1322. ISSN 0360-2559 E-ISSN 1525-6111
Anuar, Hazleen and Hj J Ahmad, Sahrim and Rasid, Rozaidi and Ahmad, Azizan and Wan Busu, W. N. (2008) Mechanical properties and dynamic mechanical analysis of thermoplastic-natural-rubber-reinforced short carbon fiber and kenaf fiber hybrid composites. Journal of Applied Polymer Science, 107 (6). pp. 4043-4052. ISSN 0021-8995
Anuar, Hazleen and Wan Busu, Wan Nazri and Ahmad, S. H. and Rasid, Rozaidi (2008) Reinforced thermoplastic natural rubber hybrid composites with Hibiscus cannabinus, L and short glass fiber – Part I: Processing parameters and tensile properties. Journal of Composite Materials, 42 (11). pp. 1075-1087. ISSN 0021-9983 (P), 1530-793X (O)
Anuar, Hazleen (2007) Essential work of fracture and acoustic emission study on TPNR composites reinforced by Kenaf Fiber. Journal of Composite Materials, 41 (25). pp. 3035-3049. ISSN 0021-9983 (P), 1530-793X (O)
Ahmad, S. H. and Rasid, Rozaidi and Surip, S. N. and Anuar, Hazleen and Czigany, T. and Abdul Razak, S. B. (2007) Mechanical and fracture toughness behavior of TPNR nanocomposites. Journal of Composite Materials, 41 (17). pp. 2147-2159. ISSN 0021-9983 (P), 1530-793X (O)
Book
Ahmad Azhar, Ahmad Zahirani and Ahmad, Zainal Arifin and Maleque, Md. Abdul and Anuar, Hazleen and Rejab, Nik Akmar and Sarifuddin, Norshahida and Ab Rahman, Mohd Fariz and Ahmadipour, Mohsen, eds. (2018) International Journal of Current Research in Science & Technology. UR Publishers, Telangana, India. ISBN 2581-4311 (ISSN)
Rahman, Mustafizur and Adesta, Erry Yulian Triblas and Ali, Mohammad Yeakub and Karim, A. N. Mustafizul and Maleque, Md. Abdul and Anuar, Hazleen and Ariff, Tasnim Firdaus and Iqbal, Mohammad and Samat, Noorasikin and Hassan, Noor Azlina, eds. (2012) Advances in manufacturing and materials engineering. Advanced Materials Research, 576 . Trans Tech Publications Ltd., , Switzerland. ISBN 978-3-03785-498-3
Al-Khatib, Ma'an Fahmi Rashid and Anuar, Hazleen and Samat, Noorasikin and Al-Mamun, Abdullah, eds. (2011) Advances in nanotechnology & its application. IIUM Press, Kuala Lumpur. ISBN 9789670225876
Anuar, Hazleen and Samat, Noorasikin, eds. (2011) Malaysia natural fibres for diversed bio-based application. IIUM Press, Kuala Lumpur. ISBN 9789674180218
Book Chapter
Nordin, N. M. and Anuar, Hazleen and Ali, Fathilah and Buys, Y. F. (2023) Properties of polylactic acid biocomposite foamed treated via supercritical carbon dioxide. In: Springer Proceedings in Materials. Springer Proceedings in Materials, 24 (1). Springer, Singapore, pp. 279-286. ISBN 978-981-99-2014-3
Tahreen, Amina and Adli, Sarah Amalina and Anuar, Hazleen and Jamaluddin, Jamarosliza and Mohan, Raja and Ali, Fathilah (2023) Algae materials for food and food packaging. In: Algae Materials: Applications Benefitting Health. Developments in Applied Microbiology and Biotechnology . Elsevier, United Kingdom, pp. 85-91. ISBN 978-0-443-18816-9
Ali, Fathilah and Azmi, Azlin Suhaida and Anuar, Hazleen and Jamaluddin, Jamarosliza (2020) Characterization of polylactic acid/organoclay nanocomposites. In: Advances in nanotechnology and its applications. Springer, Singapore, pp. 107-114. ISBN 978-981-15-4741-6
Anuar, Hazleen and Ali, Fathilah and Buys, Yose Fachmi and Mohd Apandi, Siti Nur E'zzati and Abd. Rashid, Siti Munirah Salimah and Adli, Sarah Amalina (2019) Sustainable nanocomposites in food packaging. In: Sustainable polymer composites and nanocomposites. Springer Nature Switzerland, Switerland, pp. 413-436. ISBN 978-3-030-05398-7
Ali, Fathilah and Anuar, Hazleen and Jamaluddin, Jamarosliza (2018) Structural, thermal, mechanical and rheological properties of polylactic acid/epoxidized soybean oil/organoclay blends. In: Reference module in materials science and materials engineering. Elsevier, pp. 1-8. ISBN 978-0-12-803581-8 (In Press)
Mohd Nasir, Nur Aimi and Anuar, Hazleen (2016) Effect of plasticizer on fracture toughness of polylactic acid reinforced with kenaf fibre and montmorillonite hybrid biocomposites. In: Nanoclay reinforced polymer composites: natural fibre/nanoclay hybrid composites. Engineering materials . Springer, Singapore, pp. 263-280. ISBN 978-981-10-0949-5 Online ISBN
Seeni Mohamed, Nurhafizah and Anuar, Hazleen and Aimi , N. Nur and Mel, Maizirwan and Mohd Salit, Sapuan (2014) Polylactic acid-based kenaf biomass synthesized via ring opening polymerization. In: Biomass and Bioenergy Applications. Springer International Publishing, Cham; Heidelberg; New York; Dordrecht; London, pp. 211-231. ISBN 978-3-319-07577-8; 978-3-319-07578-5 (ebook)
Anuar, Hazleen and Kaiser, Muhammad Rejaul (2011) Comparative study on the effect of plasticizer on thermal properties of Polylactic acid. In: Advances in materials engineering. IIUM Press, Kuala Lumpur, pp. 22-27. ISBN 9789674181673
Anuar, Hazleen and Ahmad, Sahrim and Rasid, Rozaidi (2011) Dynamic mechanical analysis of carbon fibre composites. In: Advances in materials engineering - volume 2. IIUM Press, Kuala Lumpur, pp. 25-30. ISBN 9789674181680
Anuar, Hazleen and Ahmad, Sahrim and Rasid, Rozaidi (2011) Effect of fibre length on tensile properties of TPNR-Kenaf fibre composite. In: Advances in materials engineering. IIUM Press, Kuala Lumpur, pp. 79-83. ISBN 9789674181673
Jamal, Nur Ayuni and Anuar, Hazleen and Abd Razak, Shamsul Bahri (2011) Effect of maleic anhydride polyethylene on damping properties of HDPE/EPDM nanocomposite. In: Advances in materials engineering. IIUM Press, Kuala Lumpur, pp. 16-21. ISBN 9789674181673
Anuar, Hazleen and Kaiser, Muhammad Rejaul (2011) Effect of nanoclay on mechanical properties of PLA-clay nanocomposite. In: Advances in materials engineering. IIUM Press, Kuala Lumpur, pp. 84-89. ISBN 9789674181673
Anuar, Hazleen and Ahmad, Sahrim and Rasid, Rozaidi (2011) Effect of processing parameters on the tensile properties of TPNR reinforced short carbon fibre composite. In: Advances in materials engineering. IIUM Press, Kuala Lumpur, pp. 11-15. ISBN 9789674181673
Anuar, Hazleen and Ahmad, Sahrim and Rasid, Rozaidi (2011) Enhanced tensile strength with sulphuric treated short carbon fibre. In: Advances in materials engineering. IIUM Press, Kuala Lumpur, pp. 74-78. ISBN 9789674181673
Seeni Mohamed, Nurhafizah and Anuar, Hazleen and Mel, Maizirwan and Othman, Rashidi and Mohd Norddin, Nur Aisyah and Mohd Nasir, Nur Aimi and Kamalbahrin, Mohd Adlan Mustafa (2011) Extraction of glucose from Kenaf core by using chemical pre-treatment process. In: Advances in materials engineering. IIUM Press, Kuala Lumpur, pp. 90-95. ISBN 9789674181673
Seeni Mohamed, Nurhafizah and Mel, Maizirwan and Anuar, Hazleen and Othman, Rashidi and Mohd Nasir, Nur Aimi and Mustafa Kamalbhrin, Mohd. Adlan (2011) Factors affecting the hydrolysis process of Kenaf Biomass for lactic acid production. In: Bioprocessing of Lactic Acid by Fermentation Technique. IIUM Press, International Islamic University Malaysia, pp. 93-99. ISBN 9789674180935
Mohd Nasir, Nur Aimi and Mustafa Kamalbhrin, Mohd. Adlan and Mohamed, Nurhafizah Seeni and Anuar, Hazleen and Mel, Maizirwan and Othman, Rashidi (2011) Growth kinetic study of Rhizopus oryzae via fermentation of lactic acid from kenaf biomass. In: Bioprocessing of Lactic Acid by Fermentation Technique. IIUM Press, Kuala Lumpur, pp. 101-111. ISBN 9789674180935
Anuar, Hazleen (2011) Lightweight kenaf fibre composite for automotive component. In: Malaysia natural fibers for diversed bio-based application. IIUM Press, Kuala Lumpur, pp. 29-38. ISBN 9789674180218
Seeni Mohamed, Nurhafizah and Nasir, Nur Aimi and Mustafa Kamalbhrin, Mohd. Adlan and Anuar, Hazleen and Mel, Maizirwan and Othman, Rashidi (2011) Optimization of kenaf biomass's pre-treatment for polylactic acid's monomer production. In: Malaysia natural fibers for diversed bio-based application. IIUM Press, Kuala Lumpur, pp. 111-120. ISBN 9789674180218
Kaiser, Mohammad Rejaul and Anuar, Hazleen (2011) Polylactic acid bio-composite for food packaging. In: Malaysia natural fibers for diversed bio-based application. IIUM Press, Kuala Lumpur, pp. 99-109. ISBN 9789674180218
Mohd Nasir, Nur Aimi and Mustafa Kamalbhrin, Mohd. Adlan and Anuar, Hazleen (2011) Potential of kenaf in economic perspectives. In: Malaysia natural fibers for diversed bio-based application. IIUM Press, Kuala Lumpur, pp. 21-27. ISBN 9789674180218
Uyop, Mohd Khairun Anwar and Hamdan, Hamid and Mat Tahir, Paridah and Anuar, Hazleen and Samat, Noorasikin and Mohamed, Siti Rafidah (2011) Surface quality of Dipterocarpus spp under tropical climate change: effect of pre-weathering. In: Advances in Materials Engineering - Volume 2. IIUM Press, Kuala Lumpur, pp. 146-150. ISBN 9789674181680
Anuar, Hazleen and Ahmad, Sahrim and Rasid, Rozaidi (2011) Surface topography of sulphuric treated carbon fibre. In: Advances in Materials Engineering - Volume 2. IIUM Press, Kuala Lumpur, pp. 151-156. ISBN 9789674181680
Seeni Mohamed, Nurhafizah and Mohd Sibi, Nur Hanis and Mohd Nasir, Nur Aimi and Mustafa Kamalbhrin, Mohd. Adlan and Mel, Maizirwan and Anuar, Hazleen and Othman, Rashidi (2011) Synthesis lactic acid from Kenaf Bast by using Lactobacillus rhamnosus. In: Bioprocessing of lactic acid by fermentation techniques. IIUM Press, International Islamic University Malaysia, pp. 83-91. ISBN 9789674180935
Jamal, Nur Ayuni and Anuar, Hazleen and Abd Razak, Shamsul Bahri (2011) Tensile and impact properties enhancement of crosslinked high density polythlene and ethylene propylene diene monomer nanocomposites via electron beam irradiation. In: Advances in nanotechnology & its application. IIUM Press, Kuala Lumpur, pp. 62-81. ISBN 9789670225876
Anuar, Hazleen and Ahmad, Sahrim and Rasid, Rozaidi (2011) Water absorption of TPNR reinforce short carbon fibre composite. In: Advances in materials engineering. IIUM Press, Kuala Lumpur, pp. 69-73. ISBN 9789674181673
Proceeding Paper
Mohd Nordin, Nurfarahin and Anuar, Hazleen and Buys, Yose Fachmi (2023) Effect of supercritical carbon dioxide pressure on foamed PolyLactic Acid biocomposite. In: 5th International Conference on Advances in Manufacturing and Materials Engineering, 9th - 10th August 2022, Kuala Lumpur, Malaysia.
Abd Rahman, Nurul Amirah and Anuar, Hazleen and Ali, Fathilah and Suhr, Jonghwan (2023) Mechanical and thermal properties of 3D printed polylactic acid reinforced alkaline lignin with epoxidized palm oil bio-composites. In: 5th International Conference on Advances in Manufacturing and Materials Engineering, 9th - 10th August 2022, Kuala Lumpur, Malaysia.
Azahari, Nur Najma Athirah and Anuar, Hazleen and Hassan, Azman and Jawaid, Mohammed and Halim, Zahurin and Samsudin, Sani Amril (2023) Mechanical properties of magnesium hydroxide/halloysite nanotubes reinforced polyamide 11 nanocomposites. In: 5th International Conference on Advances in Manufacturing and Materials Engineering, 9th - 10th August 2022, Kuala Lumpur, Malaysia.
Manshor, Mohd Romainor and Kamarulzaman, Amjad Fakhri and Anuar, Hazleen and Toha @ Tohara, Siti Fauziah and Ali, Fathilah and Sukindar, Nor Aiman and Suhr, Jonghwan and Haris, Nursyam Dzuha (2023) Optimizing tensile strength of PLA-Lignin Bio-composites using machine learning approaches. In: 5th International Conference on Advances in Manufacturing and Materials Engineering, 9th - 10th August 2022, Kuala Lumpur, Malaysia.
Md Azhar, Muhammad Afif and Sukindar, Nor Aiman and Ani, Mohd Hanafi and Anuar, Hazleen and Kamaruddin, Shafie and Syed Shaharuddin, Sharifah Imihezri and Mustafa, Mohd Yusry and Adesta, Erry Yulian Triblas and Arief, Rudi Kurniawan and Sulaiman, Mohd Hafis (2023) Review on fused deposition modelling extruder types with their specialities in filament extrusion process. In: 5th International Conference on Advances in Manufacturing and Materials Engineering, ICAMME 2022, 9-10 August 2022, Kuala Lumpur.
Md Azhar, Muhammad Afif and Sukindar, Nor Aiman and Ani, Mohd. Hanafi and Anuar, Hazleen and Kamaruddin, Shafie and Syed Shaharuddin, Sharifah Imihezri and Mustafa, Mohd Yusry and Adesta, Erry Yulian Triblas and Arief, Rudi Kurniawan and Sulaiman, Mohd Hafis (2023) Review on fused deposition modelling extruder types with their specialities in filament extrusion process. In: 5th International Conference on Advances in Manufacturing and Materials Engineering (ICAMME2022), 9th - 10th August 2022, Kuala Lumpur, Malaysia.
Kherchi, Asma and Ali, Fathilah and Azmi, Azlin Suhaida and Ahmad, Farah and Anuar, Hazleen (2023) Effect of Polylactic Acid (PLA) concentrations on tensile properties for transdermal patch. In: IIUM Engineering Congress 2023 (IEC ’23), 15 – 16 August 2023, IIUM.
Mirghani, Mohamed Elwathig Saeed and Ali, Fathilah and Anuar, Hazleen and Ahmad, Farah and Suhr, Jongwan (2021) Extraction of lignin from oil palm empty fruit bunches as filler in polylactic acid (PLA) bio-composite for 3D printing application. In: The 1st International Conference of Bioscience and Biorefinery (IC2B) 2021, 13-14 October 2021, 13-14 October 2021, Malaysia. (Unpublished)
Abd Rahman, Nurul Amirah and Anuar, Hazleen and Ali, Fathilah and Suhr, Jonghwan (2021) Poly(Lactic) acid reinforced with alkaline Lignin Biocomposites prepared by Thermal Extrusion for sustainable 3D printing process. In: 1st International Conference on Material Processing and Technology 2021 (ICMProTech), 14-15 July 2021, Perlis, Malaysia (Virtual).
Pairon, Mohammad Shahrizad and Ali, Fathilah and Anuar, Hazleen and Ahmad, Farah and Suhr, Jonghwan and Mirghani, Mohamed Elwathig Saeed (2021) Reinforcement of Polylactic acid (PLA) bio-composite with lignin from oil palm empty fruit bunches (OPEFB) for 3D printing application. In: 6th International Conference on Biotechnology Engineering (ICBioE 2021), 22-23 June 2021, Kuala Lumpur, Malaysia.
Pairon, Mohammad Shahrizad and Ali, Fathilah and Anuar, Hazleen and Ahmad, Farah and Jonghwan, Suhr and Mirghani, Mohamed Elwathig Saeed (2021) Reinforcement of Polylactic acid (PLA) biocomposite with lignin from oil palm empty fruit bunches (OPEFB) for 3D printing application. In: 6th International Conference on Biotechnology Engineering (ICBioE 2021), 22-23 June 2021, Kuala Lumpur, Malaysia.
Anuar, Hazleen (2020) Employing circular economy on offshore D&A via life cycle assessment. In: Industry Meets Academia: Decommissioning & Abandonment Webinar Series, 22nd July 2020, Kuala Lumpur, Malaysia.. (Unpublished)
Abd. Rashid, Siti Munirah Salimah and Anuar, Hazleen and Mohd Apandi, Siti Nur E'zzati and Buys, Yose Fachmi and Hassan, Noor Azlina (2019) Effects of plasticizer on mechanical properties of durian skin fiber reinforced polylactic acid biocomposite. In: International Conference on X-Rays and Related Techniques in Research and Industry 2018 (ICXRI 2018), 18th-19th August 2018, Kota Baharu, Kelantan.
Nordin, N.M. and Buys, Yose Fachmi and Anuar, Hazleen and Ani, Mohd Hanafi and Pang, Ming Meng (2019) Development of conductive polymer composites from PLA/TPU blends filled with graphene nanoplatelets. In: 6th International Conference on Recent Advances in Materials, Minerals and Environment (RAMM), 27 - 29 Nov 2018, Batu Feringgi, Penang.
Anuar, Hazleen (2019) Physical properties of durian skin fibre reinforced plasticized polylactic acid biocomposite. In: International Conference on Natural Polymers (ICNP – 2019), 6th-8th December 2019, Kerala, India. (Unpublished)
Mohs Apandi, Siti Nur 'Ezzati and Anuar, Hazleen and Abd. Rashid, Siti Munirah Salimah (2018) Effect of coupling agent on durian skin fibre nanocomposite reinforced polypropylene. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8th-9th August 2017, Gombak, Kuala Lumpur.
Buys, Yose Fachmi and Aznan, Aisyah Nur Atiqah and Anuar, Hazleen (2018) Mechanical properties, morphology, and hydrolytic degradation behavior of polylactic acid / natural rubber blends. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8 - 9 August 2017, Kuala Lumpur, Malaysia.
Ali, Fathilah and Anuar, Hazleen and Awale, Rania J. (2015) Flexible and biodegradable film for environmental friendly packaging material. In: IIRIE 2015, CAC Gombak.
Ali, Fathilah and Anuar, Hazleen and Fakhruldin, Hanan (2015) Plasticizing Poly(lactic acid) using epoxidized palm oil for environmental friendly packaging material. In: Malaysia Polymer International Conference (MPIC 2015), 10th-11th June 2015, Palm Garden Hotel, IOI Resort, Putrajaya. (Unpublished)
Jame, Raina and Mirghani, Mohamed Elwathig Saeed and Anuar, Hazleen and Samat, Noorasikin and Ali, Fathilah (2015) Preparation and characterization of plasticized Polylactic acid/starch blend. In: 5th International Conference on Advancement in Science and Technology (iCAST 2015), 10th-12th August 2015, Kuantan, Pahang. (Unpublished)
Samat, Noorasikin and Zulkifli, Nur Izzati and Anuar, Hazleen (2013) Mechanical properties of recycled PP reinforced with microcrystalline cellulose: effect of MAPP content. In: 9th International Conference on Composite Science and Technology (ICCST/9), 24-26 April 2013, Sorrento, Naples Italy.
Seeni Mohamed, Nurhafizah and Mel, Maizirwan and Anuar, Hazleen and Othman, Rashidi and Mohd Nasir, Nur Aimi (2012) Extraction of glucose from kenaf core using mild acid treatment. In: 26th Symposium of Malaysian Chemicals Engineers in conjunction with the 4th International Conference on Chemical and Bioprocess Engineering, 21-23 November 2012, Sabah.
Samat, Noorasikin and Ahmad, Zuraida and Halim, Zahurin and Anuar, Hazleen and Sabaruddin, Fatimah Atiyah (2012) Mechanical and flammability properties of PVC reinforced with nano-sized ATH particles. In: International Conference on Nanotechnology (ICONT 2012), 29 May – 01 June 2012, Pahang. (Unpublished)
Anuar, Hazleen and Ab Kadir, Suzana and Kaiser, Mohamed Rejaul and Samat, Noorasikin and Hassan, Noor Azlina and Surip, Siti Norasmah (2012) Effect of PEG on tensile properties of PLA-Based biocomposite. In: The International Conference on Composite Interfaces, 6-8 August 2012, Kyoto, Japan. (Unpublished)
M.I, Ahmad Fitrie and Mohd Nasir, Nur Aimi and Anuar, Hazleen and Manshhor, Mohd Romainor and Kaiser, Mohammad Rejaul and Wan Busu, Wan Nazri (2012) Effect of maleic anhydride (MA) on thermal properties of polylactic acid (PLA) composites reinforced with durian skin fiber (DSF). In: 1st International Conference on Design and Innovation 2012, 7-8 Nov 2012, Sarawak.
Mohd Nasir, Nur Aimi and M.I, Ahmad Fitrie and Manshhor, Mohd Romainor and Kaiser, Muhammad Rejaul and Anuar, Hazleen and Wan Busu, Wan Nazri (2012) Effect of maleic anhydride on mechanical properties of Polylactic Acid (PLA) composites reinforced with Durian Skin Fiber (DSF). In: 1st International Conference on Design and Innovation 2012, 7-8 Nov 2012, Sarawak.
Manshhor, Mohd Romainor and Anuar, Hazleen and Mohd Nasir, Nur Aimi and M.I, Ahmad Fitrie and Kaiser, Mohammad Rejaul and Wan Busu, Wan Nazri (2012) Processing and characterization of durian skin fibers composites: Mechanical properties. In: 1st International Conference on Design and Innovation 2012, 7-8 Nov 2012, Sarawak.
Seeni Mohamed, Nurhafizah and Anuar, Hazleen and Mel, Maizirwan and Othman, Rashidi and Mohd Norddin, Nur Aisyah and Mohd Nasir, Nur Aimi (2012) Production of lactic acid from kenaf core hydrolysate by rhizopus oryzae FTCC 5215. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME’2012), 3 - 5 July 2012, Kuala Lumpur. (Unpublished)
Samat, Noorasikin and Anuar, Hazleen and Hassan, Noor Azlina (2012) The effect of coupling agent treatment on the mechanical and flame retardancy properties of rigid PVC-ATH nanocomposites. In: The International Conference on Composite Interfaces, 6th-8th Aug. 2012, Kyoto Japan. (Unpublished)
Kaiser, Mohammad Rejaul and Anuar, Hazleen (2011) Effect of Nanoclay on Thermal Properties of Polylacticacid-Kenaf Hybrid Bio-composite. In: International Conference on Chemical Engineering (ICChE 2011), 29-30 December 2011, Dhaka, Bangladesh. (Unpublished)
Mustafa Kamalbhrin, Mohd. Adlan and N. , Nuraisyah and Anuar, Hazleen and Mel, Maizirwan and Seeni Mohamed, Nurhafizah and Mohd. Nasir, Nur Aimi (2011) Kenaf biomass as potential biopolymer. In: Malaysia Polymer International Conference 2011 (MPIC 2011), 18-20 October 2011, Equatorial Hotel Putrajaya. (Unpublished)
Seeni Mohamed, Nurhafizah and Anuar, Hazleen and Mel, Maizirwan and Mohd. Sibi, Nurhanis (2011) Optimizing the pre-treatment of kenaf bast. In: Malaysia Polymer International Conference 2011 (MPIC 2011), 18-20 October 2011, Equatorial Hotel Putrajaya. (Unpublished)
Mohd. Nasir, Nur Aimi and Mustafa Kamalbhrin, Mohd. Adlan and Seeni Mohamed, Nurhafizah and Anuar, Hazleen and Mel, Maizirwan and Othman, Rashidi (2011) Kenaf as natural resource for lactic acid production. In: Malaysia Polymer International Conference 2011 (MPIC 2011), 18-20 October 2011, Equatorial Hotel Putrajaya. (Unpublished)
Anuar, Hazleen and Ahmad, Zuraida and Kovacs, J. G. and Tabi, T. (2011) Comparison of theoretical and experimental values of tensile properties of injection moulded polylactic acid – kenaf fibre biocomposite. In: 14th International Conference on Advances in Material and Processing Technologies (AMPT 2011), 13-16 July 2011, Istanbul, Turkey. (Unpublished)
Halim, Zahurin and Ahmad, Zuraida and Samat, Noorasikin and Anuar, Hazleen (2011) Study of new eco-core metal matrix composite sandwich structure. In: 14th International Conference on Advances in Material and Processing Technologies (AMPT 2011), 13 - 16 July 2011, Istanbul, Turkey. (Unpublished)
Anuar, Hazleen and Fuad, Faizah and Kaiser, Mohammad Rejaul and Ahmad, Zuraida and Abdul Razak, Shamsul Bahri (2011) The effect of nanoclay on the tensile properties of PLA-kenaf fibre hybrid bionanocomposite. In: International Conference on Advanced Manufacturing of Composites (ICMAC), 22-24 March 2011, Belfast, United Kingdom. (Unpublished)
Anuar, Hazleen and Kaiser, Mohammad Rejaul and Fuad, Faizah and Ahmad, Zuraida (2011) Eco-friendly PLA-kenaf fibre biocomposite for food packaging. In: Malaysia Technology Expo (MTE 2011), 17-19 February 2011, KLCC. (Unpublished)
Anuar, Hazleen and Jamal, Nur Ayuni and Abd Razak, Shamsul Bahri (2011) Electron beam irradiated nanocomposite for gas barrier application. In: Malaysia Technology Expo (MTE 2011), 17-19 February 2011, KLCC. (Unpublished)
Anuar, Hazleen and Kaiser, Mohammad Rejaul and Fuad, Faizah and Ahmad, Zuraida (2011) Eco-friendly PLA-kenaf fibre biocomposite for food packaging. In: IIUM Research, Invention and Innovation Exhibition (IRIIE) 2011, 9-10 February 2011, Cultural Activity Centre (CAC) and KAED Gallery IIUM.
Anuar, Hazleen and Ahmad, Zuraida (2011) Injection moulded lightweight kenaf fibre thermoplastic elastomer composite for automotive components. In: IIUM Research, Invention and Innovation Exhibition (IRIIE) 2011, 9-10 February 2011, Cultural Activity Centre (CAC) and KAED Gallery IIUM. (Unpublished)
Anuar, Hazleen and Mel, Maizirwan and Mohamed, Nurhafizah Seeni and Mohd. Nasir, Nur Aimi and Mustafa Kamalbhrin, Mohd. Adlan (2011) Kenaf: renewable source for biopolymer. In: IIUM Research, Invention and Innovation Exhibition (IRIIE) 2011, 9-10 February 2011, Cultural Activity Centre (CAC) and KAED Gallery IIUM. (Unpublished)
Anuar, Hazleen and Kaiser, Mohammad Rejaul (2011) Effect of Nanoclay on Thermal Properties of Polylacticacid-Clay Nanocomposite. In: Malaysia Polymer International Conference 2011 (MPIC 2011), 18-20 October 2011, Equatorial Hotel Putrajaya. (Unpublished)
Anuar, Hazleen and Jamal, Nur Ayuni and Abdul Razak, Shamsul Bahri (2011) Electron beam irradiated nanocomposite for gas barrier application. In: IIUM Research, Invention and Innovation Exhibition IRIIE 2011, 9-10 February 2011, Kuala Lumpur, Malaysia. (Unpublished)
Ahmad, Zuraida and Anuar, Hazleen (2011) Properties of compression moulding starch - nanoclay biocomposites. In: The 19th Annual International Conference on Composites/Nano Engineering (ICCE 19) , 27-30 July 2011, Shanghai, China. (Unpublished)
Nainar, S. Mohammed and Begum, Shahida and Mohamad, Bashir and Hassan, Zaimah and Ansari, M.N.M. and Anuar, Hazleen and Shanks, Robert A. (2011) Tensile properties and morphological studies on HA/PLA biocomposites for tissue engineering scaffolds. In: 20th Scientific Conference of the Microscopy society of Malaysia (EMSM 2011), 20th - 22nd December 2011, Port Disckson, Negeri Sembilan.
Ahmad, Zuraida and Yusof, Yusliza and Anuar, Hazleen and Razali, Muhammad Khairul Muhaimin (2011) The effect of water and citric acid on sago starch bio-plastics. In: 2nd International Conference on Biotechnology Engineering (ICBioE 2011), 17 -19 May 2011, Kuala Lumpur, Malaysia. (In Press)
Anuar, Hazleen and Ahmad, Zuraida and Halim, Zahurin (2010) Single kenaf fibre properties via in situ monitoring using acoustic emission. In: Simposium Kebangsaan Aplikasi Sains Matematik 2010 (SKSM), 8-10 December 2010, Johor Bahru, Johor, Malaysia. (Unpublished)
Kaiser, Mohammad Rejaul and Anuar, Hazleen and Maleque, Md. Abdul (2010) Fabrication of biodegradable composite – an implication of plasticizer. In: National Conference in Mechanical Engineering for Research and Postgraduate Studies 2010 (NCMER 2010), 31 May-1 June 2010, Pekan, Pahang.
Anuar, Hazleen and Fuad, Faizah and J., Asma' and Kaiser, Mohammad Rejaul and Ahmad, Zuraida (2010) Renewable food packaging from PLA-kenaf fibre biocomposite. In: Islamic Innovation Expo 2010 (i-Inova’ 2010), 26-28 September 2010, Indoor Nilai Stadium. (Unpublished)
Anuar, Hazleen and Mel, Maizirwan and Seeni Mohamed, Nurhafizah and Mohd. Nasir, Nur Aimi and Mustafa Kamalbhrin, Mohd. Adlan (2010) New potential of biomaterials from kenaf fibre biomass. In: Islamic Innovation Expo 2010 (i-Inova’ 2010), 26-28 September 2010, Indoor Nilai Stadium. (Unpublished)
Anuar, Hazleen and Ahmad, Zuraida and Jozsef Gabor, Kovacs and A., Adilah (2010) Kenaf fibre reinforced poly(lactic acid) biocomposites. In: 8th Global WPC and Natural Fibre Composites Congress and Exhibition, 22–23 June 2010, Stuttgart, Germany. (Unpublished)
Anuar, Hazleen and Ahmad, Zuraida and F., Fuad (2010) Biodegradable PLA-Kenaf fibre biocomposite for cleaner environment. In: Malaysian Science and Technology Congress (MSTC 2010), 9-11 November 2010, Crystal Crown Hotel, Petaling Jaya, Malaysia. (Unpublished)
Anuar, Hazleen and A., Adilah and S.N., Surip (2010) Development of reinforced thermoplastic elastomer with kenaf bast fibre for automotive component. In: 14th European Conference on Composite Materials, 7-10 June 2010, Budapest, Hungary.
Jamal, Nur Ayuni and Anuar, Hazleen and Ahmad, Zuraida and Abd Razak, Shamsul Bahri (2010) Hazardless nanocomposite for gas barrier potential. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010), 26 - 27 January 2010, Kuala Lumpur.
Anuar, Hazleen and Mel, Maizirwan and Seeni Mohamed, Nurhafizah and Mohd Sidi, Nor Hanis (2010) Lactic acid production from Kenaf fibre. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010), 26 - 27 January 2010, Kuala Lumpur.
Surip, Siti Norasmah and Ismail, A. H. and Anuar, Hazleen (2010) A comparative study on the mechanical properties of clay-modified epoxy adhesive by using different clay types. In: 14th European Conference On Composite Materials (ECCM14), 7-10 June 2010, Budapest, Hungary.
Anuar, Hazleen and Ahmad, Zuraida and Mat Ali, Adilah and Yusof, Siti Rasyidah and Fuad, Faizah (2010) An eco-plastic made of PLA-Kenaf fibre biocomposite for cleaner environment. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010), 26 - 27 January 2010, Kuala Lumpur.
H. H. , Hairuddin and S., Muddath and Anuar, Hazleen and N. A, Jamal (2009) Preliminary studies of rubber toughened polypropylene - kenaf fiber composite. In: 4th International Conference on Recent Advabces in Materials, Minerals & Environment and 2nd Asian Symposium on Material and Processing, 1st - 3rd June 2009, Penang, Malaysia.
Monograph
Anuar, Hazleen (2019) Active packaging from polylactic acid biocomposite film via supercritical fluids impregnation. Project Report. UNSPECIFIED. (Unpublished)
Buys, Yose Fachmi and Anuar, Hazleen (2018) Study on miscibility and degradation behavior of polylactic acid / thermoplastic polyurethane blends. Project Report. UNSPECIFIED. (Unpublished)
Jimat, Dzun Noraini and Anuar, Hazleen and Sulaiman, Sarina and Samat, Noorasikin and Wan Salim, Wan Wardatul Amani and Asem Shehadeh Saleh Ali, Maimunah and Syed Putra, Sharifah Shahira (2018) Development of bionanocomposite reinforced with sugarcane bagasse nanocellulose and incorporated with natural antimicrobial agent for food packaging applications. Project Report. UNSPECIFIED. (Unpublished)
Buys, Yose Fachmi and Anuar, Hazleen (2018) Morphology and electrical properties of polylactide / natural rubber blend filled with conductive nano carbon. Research Report. UNSPECIFIED. (Unpublished)
Anuar, Hazleen and Mel, Maizirwan (2012) Hydrolysis of glucose in Kenaf biomass. Research Report. s.n, Kuala Lumpur. (Unpublished)
Anuar, Hazleen (2012) Effect of nanoclay on the mechanical properties of kenaf fibre reinforced polylactic acid hybrid biocomposite. Research Report. s.n, Kuala Lumpur. (Unpublished)
Anuar, Hazleen (2011) Novel polylactic acid obtained by chemical and biochemical hydrolysis of kenaf fibre. Project Report. The Academy of Sciences for Developing World (TWAS). (Unpublished)
Patent
Anuar, Hazleen (2010) Sugar hydrolysis of kenaf fibre for utilization in lactic acid production. PI 2010005191 .