Items where Author is "Ani, Mohd Hanafi"

Group by: Item Type | No Grouping

Jump to: Article | Book Chapter | Proceeding Paper | Monograph

Number of items: 124.

Article

Mohd Shatar, Nursyahirah and Mohd Sabri, Mohd Faizul and Mohd Salleh, Mohd Faiz and Ani, Mohd Hanafi and Xie, Xitong and Weck, Arnaud (2023) Femtosecond laser induced porous surface on polymethyl methacrylate for filmwise condensation to improve solar still productivity. Desalination, 568. pp. 1-9. ISSN 0011-9164 E-ISSN 1873-4464

Mohd Shatar, Nursyahirah and Mohd Sabri, Mohd Faizul and Mohd Salleh, Mohd Faiz and Ani, Mohd Hanafi (2023) Energy, exergy, economic, environmental analysis for solar still using partially coated condensing cover with thermoelectric cover cooling. Journal of Cleaner Production, 387. pp. 1-11. ISSN 0959-6526 E-ISSN 1879-1786

Illias, Suhaimi and Hussain, Suhaila and Ishak, Mohamad Shaiful Ashrul and Abdul Rahman, Md. Tasyrif and Awang @ Hasyim, Syamsul Syahrun and Selamat, Salsuwanda and Ani, Mohd Hanafi (2023) Single droplet size and volume measurement – comparison between experiment and theory. Journal of Mechanical Engineering, 20 (1). pp. 233-243. ISSN 1823-5514 E-ISSN 2550-164X

Sirat, Mohamad Shukri and Johari, Muhammad Hilmi and Mohmad, Abdul Rahman and Mohammad Haniff, Muhammad Aniq Shazni and Ani, Mohd Hanafi and Mat Hussin, Mohd Rofei and Mohamed, Mohd Ambri (2022) Direct growth and properties of few-layer MoS2 on multilayer graphene prepared by chemical vapor deposition. Journal of Materials Science. ISSN 0022-2461 E-ISSN 1573-4803

Seman, R. N. A. R and Azam, Mohd Asyadi and Mohamed, Mohd Ambri and Ani, Mohd Hanafi (2022) Effect of Polytetrafluoroethylene binder content on gravimetric capacitance and life cycle stability of graphene supercapacitor. International Journal of Automotive and Mechanical Engineering (IJAME), 19 (3). pp. 9964-9970. ISSN 2229-8649 E-ISSN 2180-1606

Ani, Mohd Hanafi and Zulkeflee, Muhammad Zakhuan and Kaderi, Akbar and Sutjipto, Agus Geter Edy and Salim, Nurjannah (2022) Multiwall carbon nanotubes based triboelectric nanogenerators. Materials Science Forum, 1056. pp. 33-38. ISSN 1662-9752

Mohd Shatar, Nursyahirah and Mohd Salleh, Mohd Faiz and Ani, Mohd Hanafi and Mohd Sabri, Mohd Faizul (2022) Mix wettability surface on solar still cover for freshwater productivity enhancement. Desalination, 534. pp. 1-9. ISSN 0011-9164

Sirat, Mohamad Shukri and Johari, Muhammad Hilmi and Mohmad, Abdul Rahman and Mohammad Haniff, Muhammad Aniq Shazni and Ani, Mohd Hanafi and Syono, Mohd Ismahadi and Mohamed, Mohd Ambri (2022) Uniform growth of MoS2 films using ultra-low MoO3 precursor in one-step heating chemical vapor deposition. Thin Solid Films, 744. pp. 1-8. ISSN 0040-6090

Mohd Abid, Mohd Asyadi Azam and Safie, Nur Ezyanie and Abdul Aziz, Mohd Fareezuan and Raja Seman, Raja Noor Amalina and Suhaili, Muhamad Rafi and Abdul Latiff, Anas and Arith, Faiz and Mohamed Kassim, Anuar and Ani, Mohd Hanafi (2021) Structural characterization and electrochemical performance of nitrogen doped graphene supercapacitor electrode fabricated by hydrothermal method. International Journal of Nanoelectronics and Materials, 14 (2). pp. 127-136. ISSN 1985-5761 E-ISSN 2232-1535

Illias, Suhaimi and Hussain, Suhaila and Ishak, Mohamad Shaiful Ashrul and Mustaffa, Mohammad Taufiq and Ismail, Khairul Azwan and Selamat, Salsuwanda and Ani, Mohd Hanafi (2021) Investigation on water droplet receding height impacting onto heated carbon surface. Journal of Mechanical Engineering Research and Developments, 44 (6). pp. 335-341. ISSN 1024-1752

Illias, Suhaimi and Hussain, Suhaila and Abdul Rahim, Yuzairi and Baharudin, Mohamad Ezral and Ismail, Khairul Azwan and Ani, Mohd Hanafi and UNSPECIFIED (2021) Prediction of maximum spreading time of water droplet during impact onto hot surface beyond the Leidenfrost temperature. Case Studies in Thermal Engineering, 28. pp. 1-19.

Anhar, Zaki and Musa, Muktaruddin and Illias, Suhaimi and Ani, Mohd Hanafi (2020) A review of current prediction methods for slagging and fouling in Malaysian coal fired power plants. Test Engineering & Management, 83 (May-June). pp. 1411-1418. ISSN 0193-4120

Rosman, Nur Afiqah and Illias, Suhaimi and Hussain, Suhaila and Ashrul Ishak, Mohamad Shaiful and Ani, Mohd Hanafi (2020) Experimental investigation of critical heat flux during impact of a droplet onto hot horizontal surface. International Journal of Emerging Trends in Engineering Research, 8 (5). pp. 1663-1666. ISSN 2347-3983

Zainal, Muhammad Talhah and Mohd Yasin, Mohd Fairus and Wan Ali, Wan Fahmin Faiz and Tamrin, Khairul Fikri and Ani, Mohd Hanafi (2020) Carbon precursor analysis for catalytic growth of carbon nanotube in flame synthesis based on semi‐empirical approach. Carbon Letters, Early Access. pp. 1-11. ISSN 1976-4251 E-ISSN 2233-4998

Ismail, Edhuan and Fauzi, Fatin Bazilah and Mohamed, Mohd Ambri and Mohd Yasin, Mohd Fairus and Mohd Abid, Mohd Asyadi Azam and Yaacob, Iskandar Idris and Md Din, Muhamad Faiz and Ani, Mohd Hanafi (2019) Kinetic studies of few-layer graphene grown by flame deposition from the perspective of gas composition and temperature. RSC Advances, 9 (36). pp. 21000-21008. ISSN 2046-2069

Fauzi, Fatin Bazilah and Ismail, Edhuan and Syed Abu Bakar, Syed Noh and Ismail, Ahmad Faris and Mohamed, Mohd Ambri and Md Din, Muhammad Faiz and Illias, Suhaimi and Ani, Mohd Hanafi (2019) The role of gas-phase dynamics in interfacial phenomena during few-layer graphene growth through atmospheric pressure chemical vapour deposition. Physical Chemistry Chemical Physics, 22 (6). pp. 3481-3489. ISSN 1463-9076 E-ISSN 1463-9084

Raja Seman, Raja Noor Amalina and Mohd Abid, Mohd Asyadi Azam and Ani, Mohd Hanafi (2018) Graphene/transition metal dichalcogenides hybrid supercapacitor electrode: status, challenges, and perspectives. Nanotechnology, 29 (50). ISSN 0957-4484 E-ISSN 1361-6528

Fauzi, Fatin Bazilah and Ismail, Edhuan and Ani, Mohd Hanafi and Syed Abu Bakar, Syed Noh and Mohamed, Mohd Ambri and Majlis, Burhanuddin Yeop and Md Din, Muhammad Faiz and Mohd Abid, Mohd Asyadi Azam (2018) A critical review of the effects of fluid dynamics on graphene growth in atmospheric pressure chemical vapor deposition. Journal of Materials Research, 33 (9). pp. 1088-1108. ISSN 0884-2914 E-ISSN 2044-5326

Adnan, Ammar and H., Hanafi and Radin Umar, Radin Zaid and S., Samuel and Shaffiar, Norhashimah and Abdul Hamid, Abd. Malek and Ani, Mohd Hanafi (2018) Effect of hatched marking length on entering position among motorcyclists during merging in expressway. Science Intaernational (Lahore), 30 (3 (May-June)). pp. 451-454. ISSN ISSN 1013-5316

Ani, Mohd Hanafi and Kamarudin, Mohd Syahidan and Ramlan, A H and Ismail, Edhuan and Sirat, Mohd Shukri and Mohamed, Mohd Ambri and Mohd Abid, Mohd Asyadi Azam (2018) A critical review on the contributions of chemical and physical factors toward the nucleation and growth of large-area graphene. Journal of Materials Science, 53 (10). pp. 7095-7111. ISSN 0022-2461 E-ISSN 1573-4803

Mohd Abid, Mohd Asyadi Azam and Raja Seman, Raja Noor Amalina and Zulkifli, Mohd Fadzil and Mohamed, Mohd Ambri and Ani, Mohd Hanafi (2018) Carbon nanomaterials derived from Malaysia’s highway road asphalt waste as electrode for supercapacitor. Journal of Materials and Environmental Sciences, 9 (7). pp. 2164-2168. ISSN 2028-2508

Sirat, Mohd Shukri and Ismail, Edhuan and Purwanto, Hadi and Mohd Abid, Mohd Asyadi Azam and Ani, Mohd Hanafi (2017) Growth conditions of graphene grown in Chemical Vapour Deposition (CVD). Sains Malaysiana, 46 (7). pp. 1033-1038. ISSN 0126-6039

Musa, Mukhtarudin and Wan Yusoff, Wan Ahmad Yusmawiza and Purwanto, Hadi and Abdul Hamid, Abd. Malek and Othman, Raihan and Ani, Mohd Hanafi (2017) Microstructural and compositional study of metal laminated composite in Malay Keris. Advanced Science Letters, 23 (7). pp. 6237-6241. ISSN 1936-6612 E-ISSN 1936-7317

Mohamed Haider, Farag I. and ,, Suryanto and Ani, Mohd Hanafi and Mahmood, Mahmood Hameed (2017) Evaluation of the effects of copper electroplating parameters on the adhesion using response surface methodology. Applied Mechanics and Materials, 864. pp. 121-126. ISSN 1662-7482

Mohd Abid, Mohd Asyadi Azam and Zulkapli, Nor Najihah and Dorah, Norasimah and Raja Seman, Raja Noor Amalina and Ani, Mohd Hanafi and Sirat, Mohd Shukri and Ismail, Edhuan and Fauzi, Fatin Bazilah and Mohamed, Mohd Ambri and Majlis, Burhanuddin Yeop (2017) Review—Critical considerations of high quality graphene synthesized by plasma-enhanced chemical vapor deposition for electronic and energy storage devices. ECS Journal of Solid State Science and Technology, 6 (6). M3035-M3048. ISSN 2162-8769 E-ISSN 2162-8777

-, Suryanto and Haider, Farag and Ani, Mohd Hanafi and Mahmood, Mahmood Hameed (2017) Modelling and optimization of copper electroplating adhesion strength. IOP Conference Series: Materials Science and Engineering, 204 (012017). pp. 1-5. ISSN 1757-899X

Ismail, Edhuan and Sirat, Mohd Shukri and Abdul Hamid, Abdul Malek and Othman, Raihan and Mohd Abid, Mohd Asyadi Azam and Ani, Mohd Hanafi (2017) Synthesis of large-area few-layer graphene by open-flame deposition. Sains Malaysiana. ISSN 0126-6039

Rozhan, Alya Naili and Cahyono, Rochim Bakti and Nomura, Takahiro and Ani, Mohd Hanafi and Mohd. Salleh, Hamzah and Akiyama, Tomohiro and Purwanto, Hadi (2016) Enhancement of oil palm empty fruit bunch char by impregnation of pyrolytic carbon from tar vapor decomposition. Journal of Renewable and Sustainable Energy, 8 (1). 013110-1-013110-11. ISSN 1941-7012

Johari, Norhasnidawani and Hassan, Noor Azlina and Hassan, Norita and Ani, Mohd Hanafi (2016) Effect of nanoparticles on wettability of nanocoating on carbon steel. International Journal of Engineering Materials and Manufacture (IJEMM), 1 (2). pp. 71-74. E-ISSN 0128-1852

Ani, Mohd Hanafi and Ramli, Nor Shahirah and Wan Yusoff, Wan Ahmad Yusmawiza and Mustafah, Yasir Mohd. and Othman, Raihan (2015) Formation of hydrophobic surface using two stages electrodeposition method. Advanced Materials Research, 1115. pp. 226-229. ISSN 1022-6680

Iqbal, Mohammad and Konneh, Mohamed and Ani, Mohd Hanafi and Abdallah, Kassim Abdulrahman and Binting, Muhammad Faruq (2015) Cutting temperature in high speed milling of silicon carbide using diamond coated tool. International Journal of Mechanical And Production Engineering, 3 (4). pp. 62-66. ISSN 2320-2092 E-ISSN 2321-2071

Rozhan, Alya Naili and Ani, Mohd Hanafi and Mohd. Salleh, Hamzah and Akiyama, Tomohir and Purwanto, Hadi (2015) Development of carbon-infiltrated bio-char from oil palm empty fruit bunch. ISIJ International, 55 (2). pp. 436-440. ISSN 1347-5460 (O), 0915-1559 (P)

Fauzi, Fatin Bazilah and Othman, Raihan and Mohamed, Mohd Ambri and Herman, Sukreen Hana and Ahmad Azhar, Ahmad Zahirani and Ani, Mohd Hanafi (2015) Transition metal oxide (TMO) thin film memristor on cu substrate using dilute electrodeposition method. Materials Transactions, 56 (8). pp. 1302-1306. ISSN 1347-5320 (O), 1345-9678 (P)

Mohamed Noor, Noraini and Othman, Raihan and Mohd Hatta, Maziati Akmal and Ani, Mohd Hanafi (2014) Determination of linear tafel region from piecewise linear regression analysis. International Journal of Electroactive Materials, 2. pp. 22-27. ISSN 2289-179X

Rosli, A. Bakar and Marbie, M. M. and Herman, Sukreen Hana and Ani, Mohd Hanafi (2014) Gold-catalyzed growth of aluminium-doped zinc oxide nanorods by sputtering method. Journal of Nanomaterials, 2014 (67204). pp. 1-7.

Purwanto, Hadi and Mohd. Salleh, Hamzah and Ani, Mohd Hanafi and Yunus, Nurul Azhani and Zamani Abd Rashid, Rusila and Tomohiro, Akiyama and Othman, Nur Ezzah Faezah (2014) Effect of reduction roasting by using bio-char derived from empty fruit bunch on the magnetic properties of Malaysian iron ore. International Journal of Mineral, Metallurgy and Minerals, 21 (4). pp. 326-330. ISSN 1674-4799

Purwanto, Hadi and Ani, Mohd Hanafi and Salleh, Hamzah Mohd. and Abd Rashid, Rushila Zamani and Yunus, Nurul Azhani and Tomohiro, Akiyama (2014) Enhancement of magnetic properties of Malaysian iron ore by reduction roasting using oil palm empty fruit bunch. ISIJ International, 54 (4). pp. 994-996. ISSN 1347-5460 (O), 0915-1559 (P)

Zamani Abd Rashid, Rusila and Mohd. Salleh, Hamzah and Ani, Mohd Hanafi and Yunus, Nurul Azhani and Tomohiro, Akiyama and Purwanto, Hadi (2014) Reduction of low grade iron ore pellet using palm kernel shell. Renewable Energy, 63. pp. 617-623. ISSN 0960-1481

Wan Yusoff, Wan Ahmad Yusmawiza and Zakariah, Nur Zawanah and Abdullah, Nurshafika and Ani, Mohd Hanafi and Mohd. Mustafah, Yasir (2014) Fabrication of hip and pelvis part for designing acetabular implant by using Fused Deposition Modeling (FDM) machine. Advanced Materials Research, 875-87. pp. 1235-1238. ISSN 1022-6680

Rosli, Anis Diyana Hashemi and Yusof, Khairul Aimi and Herman, Sukreen Hana and Johari, M. H. and Shariffudin, Shafinaz Sobihana and Ani, Mohd Hanafi (2014) Effect of metal catalysts type and annealing time on the growth of zinc oxide nanostructures by thermal vapor deposition method. Advanced Materials Research, 1024. pp. 60-63. ISSN 1022-6680

Yunus, Nurul Azhani and Ani, Mohd Hanafi and Mohd. Salleh, Hamzah and Jusoh @ Abd Rashid, Rusila Zamani and Akiyama, Tomohiro and Purwanto, Hadi (2013) Reduction of iron ore/empty fruit bunch char briquette composite. ISIJ International, 53 (10). pp. 1749-1755. ISSN 1347-5460 (O), 0915-1559 (P)

Ani, Mohd Hanafi (2013) Pencemaran merentas sempadan. Malaysiakini.

Zamani Abd Rashid, Rusila and Purwanto, Hadi and Mohd. Salleh, Hamzah and Ani, Mohd Hanafi and Akiyama, Tomohiro and Yunus, Nurul Azhani (2013) Carbon doped iron ore using palm kernel shell. Advanced Materials Research, 701. pp. 28-31. ISSN 1022-6680

Mohd Hatta, Maziati Akmal and Othman, Raihan and Ani, Mohd Hanafi (2013) Comparative electrochemical performance characteristics of aluminium-air cell employing seawater and NaCl electrolytes. Advanced Materials Research, 701. pp. 314-318. ISSN 1022-6680

Nur Sa’adah, Muhamad Sauki and Herman, Sukreen Hana and Ani, Mohd Hanafi and Mohamad Rusop , Mahmood (2013) Electrical properties dependence on substrate temperature of sputtered ZnO nanoparticles thin films on teflon substrates. Advanced Materials Research, 795. pp. 403-406. ISSN 1022-6680

Yunus, Nurul Azhani and Ani, Mohd Hanafi and Purwanto, Hadi and Mohd. Salleh, Hamzah and Zamani Abd Rashid, Rusila and Akiyama, Tomohiro (2013) Magnetization of low grade iron ore using empty fruit bunch ash. Advanced Materials Research, 701. pp. 141-144. ISSN 1022-6680

Musa, Muktaruddin and Ani, Mohd Hanafi and Othman, Raihan (2013) Natural corrosion inhibitor for corrosion protection of metal artefact: an overview. Advanced Materials Research, 701. pp. 323-328. ISSN 1022-6680

Mohd Mustafah, Yasir and Azman, Amelia Wong and Ani, Mohd Hanafi (2013) Object distance and size measurement using stereo vision system. Advanced Materials Research, 622/23. pp. 1373-1377. ISSN 1022-6680

Mohd Yusoff, Marmeezee and Ani, Mohd Hanafi and -, Suryanto (2013) Synthesis and characterization of ZnO thin film memristor. Advanced Materials Research, 701. pp. 172-175. ISSN 1022-6680

Saputra, Hens and Othman, Raihan and Sutjipto, Agus Geter Edy and Muhida, Riza and Ani, Mohd Hanafi (2012) Solid state, dry zinc/MCM-41/air cell as relative humidity sensor. Journal of Membrane Science, 415-16. pp. 237-241. ISSN 0376-7388

Mohd Zawi, Nor Liza and Othman, Raihan and Ani, Mohd Hanafi and Saputra, Hens (2012) Performance characteristics of bipolar Zn/MCM-41/MnO2 Cell. Advanced Materials Research, 512/15. pp. 1055-1058. ISSN 1022-6680

Saputra, Hens and Othman, Raihan and Sutjipto, Agus Geter Edy and Muhida, Riza and Ani, Mohd Hanafi (2012) Gel-like properties of MCM-41 material and its transformation to MCM-50 in a caustic alkaline surround. Materials Research Bulletin, 47 (3). pp. 732-736. ISSN 0025-5408

Ani, Mohd Hanafi and Mohd Hatta, Maziati Akmal and Othman, Raihan (2012) Effect of Al ions on adsorption efficiency of mesoporous organosilica for water treatment. Advanced Materials Research, 415/17. pp. 2024-2031. ISSN 1022-6680

Othman, Raihan and Ahmat, Farouq and Ibrahim, Muhd Amlie and Nor Hairin, Assayidatul Laila and Ani, Mohd Hanafi (2012) Effect of bath formulation and plating current density on electrodeposited zinc anode’s capacity in zinc-air cell. Advanced Materials Research, 576. pp. 484-487. ISSN 1022-6680

Ani, Mohd Hanafi and Othman, Raihan (2012) Formation of protective Cr2O3 scale at high temperature and the effect of mass transport in the presence of water vapor. Advanced Materials Research, 402. pp. 412-420. ISSN 1662-8985

Kaderi, Akbar and Meskon, Shahrul Razi and Ani, Mohd Hanafi and Othman, Raihan (2012) Initial stage oxidation of cr in dry and wet environment at 1073 K and the significant differences of FT – IR spectra produced thereof. Advanced Materials Research , 576 (2012). pp. 619-622. ISSN 1022-6680

Ani, Mohd Hanafi and Herman, Sukreen Hana and -, Suryanto and Othman, Raihan (2012) Internal oxidation of Ni-Cr-Al alloys under various oxygen partial pressures at 1273 K. Advanced Materials Research, 576. pp. 429-433. ISSN 1022-6680

Yunus, Nurul Azhani and Ani, Mohd Hanafi and Purwanto, Hadi and Mohd. Salleh, Hamzah and Zamani Abd Rashid, Rusila and Akiyama, Tomohiro (2012) Reduction of briquette composite made of low grade from ore and biomass ash. SEAISI Quarterly Journal, 41 (4). pp. 12-16. ISSN 0129-5721

Muhamad Suki, Nur Sa'adah and Herman, Sukreen Hana and Ani, Mohd Hanafi and Mahmood, Mohamad Rusop (2012) Structural properties of deposited ZnO thin films on flexible substrates at various substrate temperatures and RF power. Advanced Materials Research, 576 (2012). pp. 598-601. ISSN 1022-6680

Kaderi, Akbar and Ani, Mohd Hanafi and Herman, Sukreen Hana and Othman, Raihan (2012) Studies on initial stage of high temperature oxidation of Fe - 9 to 12% Cr alloys in water vapour environment. Advanced Materials Research, 557. pp. 100-107. ISSN 1022-6680

-, Suryanto and Ani, Mohd Hanafi (2012) Thermal stability of nickel molybdenum electrodeposits. Advanced Materials Research, 576. pp. 413-416. ISSN 1022-6680

Mohd Zawi, Nor Liza and Othman, Raihan and Ani, Mohd Hanafi (2012) Zn/MCM-41/MnO2 leclanché button cell R2025 for low rate applications. Advanced Materials Research, 576. pp. 374-377. ISSN 1022-6680

Nor Hairin, Assayidatul Laila and Othman, Raihan and Ani, Mohd Hanafi and Saputra, Hens (2011) High discharge rate electrodeposited zinc electrode for use in alkaline microbattery. IIUM Engineering Journal, 12 (5). pp. 115-122. ISSN 1511-788X

Manshor, Hanisah and Othman, Raihan and Nordin, Anis Nurashikin and Ani, Mohd Hanafi and Saputra, Hens (2011) Observation on responsive OCV variation od Zinc-Air cell with relative humidity content. IIUM Engineering Journal, 12 (5). pp. 79-86. ISSN 1511-788X

Saputra, Hens and Othman, Raihan and Ani, Mohd Hanafi and Sutjipto, Agus Geter Edy and Muhida, Riza (2011) High energy density zinc-air microbattery utilising inorganic MCM-41 membrane. Materials Research Innovations, 15 (1). pp. 114-117. ISSN 1433-075X

Kaderi, Akbar and Mohd Zainal, Ahmad Zaki and Ani, Mohd Hanafi and Othman, Raihan (2011) Observation on void formed in oxide scale of Fe-Cr-Ni alloy at 1073K in dry and humid environments. IIUM Engineering Journal, 12 (5). pp. 69-78. ISSN 1511-788X

Ani, Mohd Hanafi (2010) Loji nuklear pembekal utama tenaga dunia masa depan. Berita Harian.

Setiawan, Asep Ridwan and Ani, Mohd Hanafi and Ueda, Mitsutoshi and Kawamura, Kenichi and Maruyama, Toshio (2010) Oxygen permeability through internal oxidation zone in Fe–Cr alloys under dry and humid conditions at 973 and 1 073 K. ISIJ International, 50 (2). pp. 259-263. ISSN 1347-5460 (O), 0915-1559 (P)

Kawamura, Kenichi and Ani, Mohd Hanafi and Ueda, Mitsutoshi and Maruyama, Toshio (2010) The oxygen potential on the scale surface of alloys at high temperature oxidation. Netsu Sokutei : Calorimetry and Thermal Analysis, 38 (2). pp. 54-57.

Ani, Mohd Hanafi (2009) Evolving Malaysia. The Malaysian Insider.

Ani, Mohd Hanafi and Kodama, Toshiya and Ueda, Mitsutoshi and Kawamura, Kenichi and Maruyama, Toshio (2009) The effect of water vapor on high temperature oxidation of Fe-Cr alloys at 1073K. Materials Transactions, 50 (11). pp. 2656-2663. ISSN 1347-5320 (O), 1345-9678 (P)

Book Chapter

Osman, Muhammad Naqib and Ani, Mohd Hanafi and Syed Abu Bakar, Syed Noh (2020) Substrate placement inside CVD tube for graphene production. In: Materials Science Forum. Trans Tech Publications Ltd, Kuantan, Malaysia, pp. 84-91. ISBN 978-303571664-1

Musa, Muktaruddin and Ani, Mohd Hanafi and Barkeshli, Mandana and Othman, Raihan (2011) Evaluating traditional measures for the care of Keris From scientific point of view. In: Heritage and conservation. IIUM Press, Kuala Lumpur, pp. 46-51. ISBN 9789674181291

Ani, Mohd Hanafi and Othman, Raihan (2011) Measurement of oxygen permeability in bulk alloys by internal oxidation of dilute constituent. In: Advances in Materials Engineering - Volume 2. IIUM Press, Kuala Lumpur, pp. 100-105. ISBN 9789674181680

Ani, Mohd Hanafi and Othman, Raihan (2011) Measurement of oxygen permeability in bulk alloys by internal oxidation of dilute constituent. In: Contemporary metallic materials. IIUM Press, Kuala Lumpur, pp. 98-103. ISBN 9789674181642

Ani, Mohd Hanafi and Othman, Raihan (2011) Principle of solid electrolyte oxygen sensor. In: Contemporary metallic materials. IIUM Press, Kuala Lumpur, pp. 110-115. ISBN 9789674181642

Ani, Mohd Hanafi and Othman, Raihan (2011) Recent trend in application of high temperature ferritic Fe-Cr alloys in power plant. In: Contemporary metallic materials. IIUM Press, Kuala Lumpur, pp. 92-97. ISBN 9789674181642

Ani, Mohd Hanafi and Othman, Raihan (2011) Recent trend on application of high temperature ferritic Fe-Cr alloys in solid oxide fuel cells. In: Contemporary metallic materials. IIUM Press, Kuala Lumpur, pp. 104-109. ISBN 9789674181642

Ani, Mohd Hanafi and Othman, Raihan (2011) Surface oxygen potential on the oxide scale during high temperature oxidation of Fe-Cr alloys at 1073 K. In: Contemporary metallic materials. IIUM Press, Kuala Lumpur, pp. 116-120. ISBN 9789674181642

Herman, Sukreen Hana and Ani, Mohd Hanafi and Horita, Susumu (2011) X-ray photoelectron studies on the surface chemical states of yttria-stabilized zirconia thin film in aqueous acid hydrofluoric. In: Advances in materials engineering. IIUM Press, Kuala Lumpur, 0-1. ISBN 9789674181680

Proceeding Paper

Juhar, M Z F and Mohamad, M Sofwan and Illias, Suhaimi and Amin, N A M and Hussain, S and Ani, Mohd Hanafi (2023) Maximum spreading diameter of a water droplet after impact on a hot surface beyond Leidenfrost temperature. In: 8th International Conference on Applications and Design in Mechanical Engineering (ICADME 2023), 4th - 5th September 2023, Kuala Lumpur, Malaysia.

Kaderi, Akbar and Syed Abu Bakar, Syed Noh and Ani, Mohd Hanafi and Illias, Suhaimi and Osman, M. S (2023) Metal dusting led failure in a high-temperature condenser. In: 7th International Corrosion Prevention Symposium for Research Scholars, CORSYM 2021, 17 November 2021, Virtual.

Md Azhar, Muhammad Afif and Sukindar, Nor Aiman and Ani, Mohd Hanafi and Anuar, Hazleen and Kamaruddin, Shafie and Syed Shaharuddin, Sharifah Imihezri and Mustafa, Mohd Yusry and Adesta, Erry Yulian Triblas and Arief, Rudi Kurniawan and Sulaiman, Mohd Hafis (2023) Review on fused deposition modelling extruder types with their specialities in filament extrusion process. In: 5th International Conference on Advances in Manufacturing and Materials Engineering, ICAMME 2022, 9-10 August 2022, Kuala Lumpur.

Ani, Mohd Hanafi and Purwanto, Hadi and Musa, Mukhtaruddin and Illias, Suhaimi and Kaderi, Akbar and Salim, Nurjannah and Abd Rahim, Mohd Hasbi and Sutjipto, Agus Geter Edy (2022) Electrochemical monitoring of oxygen potential on Fe-Cr alloy surface during high temperature oxidation in dry and humid conditions. In: 7th International Corrosion Prevention Symposium for Research Scholars, CORSYM 2021, 17 November 2021, Virtual.

Rosdin, Muhammad Rafiq Haikal and Ismail, Ahmad Abdul Mun'im and Abdul Hamid, Abd. Malek and Purwanto, Hadi and Illias, Suhaimi and Syed Abu Bakar, Syed Noh and Ani, Mohd Hanafi (2022) High temperature oxidation of T91 alloy of steam reformer. In: 7th International Corrosion Prevention Symposium for Research Scholars (CORSYM 2021), 17th November 2021, Virtual, Online.

Ismail, Ahmad Abdul Mun'im and Rosdin, Muhammad Rafiq Haikal and Abdul Hamid, Abd. Malek and Purwanto, Hadi and Rozhan, Alya Naili and Ani, Mohd Hanafi (2022) Producing blast furnace slag cement clinker by utilizing redox reaction approach. In: 7th International Corrosion Prevention Symposium for Research Scholars (CORSYM 2021), 17th November 2021, Virtual, Online.

Musa, Mukhtaruddin and Purwanto, Hadi and Abdul Razak, Rajabi and Othman, Raihan and Musa, Lukman and Ani, Mohd Hanafi (2020) Electrochemical Impedance Spectroscopy (EIS) study of coconut water as natural inhibitor in Malay traditional preservation of iron artefact. In: 2nd Joint Conference on Green Engineering Technology & Applied Computing 2020, 4th - 5th February 2020, Bangkok, Thailand..

Abdul Latiff, Abdul Somad and Musa, Mukhtaruddin and Anhar, Zaki and Illias, Suhaimi and Ani, Mohd Hanafi (2020) Slagging of coal blends: comparison between pre-blended and in furnace blend. In: 2nd Joint Conference on Green Engineering Technology & Applied Computing 2020, 4th - 5th February 2020, Bangkok, Thailand..

Ani, Mohd Hanafi and Zaharudin, M. Z. and Anhar, Zaki and Musa, Mukhtaruddin and Abdul Hamid, Abd. Malek (2020) Accelerates high temperature oxidation due to the change of Schottky’s Barrier Height of Cr2O3 layer in humid condition. In: 2nd Joint Conference on Green Engineering Technology & Applied Computing 2020, 4th - 5th February 2020, Bangkok, Thailand.

Ani, Mohd Hanafi and Azman, M. A. F. and Musa, Mukhtaruddin and Anhar, Zaki and Abdul Hamid, Abd. Malek (2020) High temperature cathodic protection of Fe-Cr alloy. In: 2nd Joint Conference on Green Engineering Technology & Applied Computing 2020, 4th - 5th Feb. 2020, Bangkok, Thailand..

Illias, Suhaimi and Hussain, Suhaila and Rosman, N A and Abdullah, Nadiah Syafiqah and Shaiful, Mohamad Shaiful Ashrul and Omar, Mohd Nazri and Ismail, K A and Ani, Mohd Hanafi (2019) Receding height of water droplet in the film boiling regime. In: 6th International Conference on Applications and Design in Mechanical Engineering, 26 - 27 Aug 2019, Penang Island.

Sutjipto, Agus Geter Edy and Hisyam, Anwaruddin and Salim, Nurjannah and Ab Rahim, Mohd Hasbi and Legowo, Ari and Ani, Mohd Hanafi (2019) Development of inert ceramic for industrial application based on ternary phase diagram of potassiun oxide-aluminum oxide-silicon dioxide. In: 2019 Advances in Science and Engineering Technology International Conferences (ASET), 26 Mar - 10 Apr 2019, Dubai, United Arab Emirates.

Nordin, N.M. and Buys, Yose Fachmi and Anuar, Hazleen and Ani, Mohd Hanafi and Pang, Ming Meng (2019) Development of conductive polymer composites from PLA/TPU blends filled with graphene nanoplatelets. In: 6th International Conference on Recent Advances in Materials, Minerals and Environment (RAMM), 27 - 29 Nov 2018, Batu Feringgi, Penang.

Ramlan, Amir Hakimi and Sirat, Mohd Shukri and Ismail, Edhuan and Buys, Yose Fachmi and Purwanto, Hadi and Mohd Mustafah, Yasir and Md Din, Muhammad Faiz and Ani, Mohd Hanafi (2019) Effects of hydrogen during annealing process of graphene synthesis via chemical vapor deposition. In: Nanotech Malaysia 2018 in conjunction with 3rd International Conference on Enabling Science and Nanotechnology (ESciNano 2018), 5th Malaysia Workshop on 2D Materials and Carbon Nanotube (2DMC 2018), 7th-9th May 2018, Kuala Lumpur.

Illias, S and Rosman, N A and Abdullah, N S and Shaiful, A I M and Omar, M N B and Ismail, K A and Ani, Mohd Hanafi (2019) Evaporation lifetime and boiling curve on hemispherical stainless steel (304) surface. In: UNSPECIFIED.

Che Mohd Noh, Mohd Ihsan and Mohamed, Mohd Ambri and Ismail, Ahmad Ghadafi and Ani, Mohd Hanafi and Majlis, Burhanuddin Yeop (2019) Improvement of gas barrier properties of Polyethylene Terephtalate (PET) by Graphene Nanoplatelets (GNP). In: Nanotech Malaysia 2018 in conjunction with 3rd International Conference on Enabling Science and Nanotechnology (ESciNano 2018), 5th Malaysia Workshop on 2D Materials and Carbon Nanotube (2DMC 2018), 7th-9th May 2018, Kuala Lumpur.

Fauzi, Fatin Bazilah and Ismail, Edhuan and Osman, Muhammad Naqib and Rosli, Muhammad Suffian and Ismail, Ahmad Faris and Mohamed, Mohd Ambri and Syed Abu Bakar, Syed Noh and Ani, Mohd Hanafi (2019) Influence of mixed convection in atmospheric pressure chemical vapor deposition of graphene growth. In: Nanotech Malaysia 2018 in conjunction with 3rd International Conference on Enabling Science and Nanotechnology (ESciNano 2018), 5th Malaysia Workshop on 2D Materials and Carbon Nanotube (2DMC 2018), 7th-9th May 2018, Kuala Lumpur.

Sirat, Mohd Shukri and Ismail, Edhuan and Ramlan, Amir Hakimi and Fauzi, Fatin Bazilah and Yaacob, Iskandar Idris and Mohamed, Mohd Ambri and Mohd Abid, Mohd Asyadi Azam and Ani, Mohd Hanafi (2019) Influence of surface energy and elastic strain energy on the graphene growth in chemical vapor deposition. In: Nanotech Malaysia 2018 in conjunction with 3rd International Conference on Enabling Science and Nanotechnology (ESciNano 2018), 5th Malaysia Workshop on 2D Materials and Carbon Nanotube (2DMC 2018), 7th-9th May 2018, Kuala Lumpur.

Ani, Mohd Hanafi and Zaharudin, M Z and ., Suryanto and Purwanto, Hadi and Din, M.F.M. and ., T. Kurniawan (2018) Schottky's barrier height of T91/Cr2O3 heterojunction in dry and wet conditions: effects of watervapor onto accelerated high temperature oxidation. In: 2018 2nd International Conference on Engineering Innovation (ICEI), 5th-6th July 2018, Bangkok, Thailand.

Berahim, A N and Zaharudin, M Z and Ani, Mohd Hanafi and Arifin, S K (2018) Effect of dissolved hydrogen on Schottky barrier height of Fe-Cr alloy heterojunction. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017), 8th-9th August 2017, Kuala Lumpur, Malaysia.

Ani, Mohd Hanafi and Helmi, F and Herman, Sukreen Hana and Syed Abu Bakar, Syed Noh (2018) Resistive switching of Cu/Cu2O junction fabricated using simple thermal oxidation at 423 K for memristor application. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017), 8th–9th August 2017, Kuala Lumpur, Malaysia.

Meskon, Shahrul Razi and Othman, Raihan and Ani, Mohd Hanafi (2018) A secondary, coplanar design Ni/MCM-41/Zn microbattery. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8 - 9 August 2017, International Islamic University Malaysia (IIUM), Gombak Campus, Kuala Lumpur.

Meskon, Shahrul Razi and Othman, Raihan and Ani, Mohd Hanafi (2018) The viability of MCM-41 as separator in secondary alkaline cells. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8 - 9 August 2017, International Islamic University Malaysia (IIUM), Gombak Campus, Kuala Lumpur.

Fauzi, Fatin Bazilah and Ani, Mohd Hanafi and Herman, Sukreen Hana and Mohamed, Mohd Ambri (2018) Dilute electrodeposition of TiO2 and ZnO thin film memristors on Cu substrate. In: 6th International Conference on Electronic Devices, Systems and Applications 2017 (ICEDSA 2017), 8-9 August 2017, Kuching, Sarawak, Malaysia.

Haider I., Farag and -, Suryanto and Ani, Mohd Hanafi and Mahmood, Mahmood Hameed (2018) A comparison between destructive and non- destructive techniques in determining coating thickness. In: International Conference on Advances in Manufacturing and Materials Engineering 2017 (ICAMME17), 8th-9th August 2017, Kuala Lumpur, Malaysia.

Arifin, S. K. and Abdul Hamid, Abd. Malek and Berahim, Ahmad Nukhaie and Ani, Mohd Hanafi (2017) Effects of water vapor on protectiveness of Cr2O3 scale at 1073 k. In: International Conference on Advances in Manufacturing and Materials Engineering 2017 (ICAMME17), 8th-9th August 2017, Kuala Lumpur, Malaysia.

F, Farah Alia and Kurniawan, Tedi and Asmara, Yuli Panca and Ani, Mohd Hanafi and Nandiyanto, Asep Bayu Dani and UNSPECIFIED (2017) High temperature oxidation in boiler environment of chromized steel. In: 4th International Conference on Mechanical Engineering Research, ICMER 2017, 1-2 Aug 2017, Kuantan, Pahang.

F, Farah Alia and Kurniawan, Tedi and Ani, Mohd Hanafi and Nandiyanto, Asep Bayu Dani (2017) The effect of temperature on the chromizing process for Ferritic-Martensitic steel. In: 1st International Conference on Materials Physics and Mechanics 2017, MPM 2017, 22-23 July 2017, Langkawi; Malaysia.

Wan Yusoff, Wan Ahmad Yusmawiza and Ani, Mohd Hanafi and Pham, DT and Dotchev, K. (2015) Influence of molecular weight average, degree of crystallinity, and viscosity of different polyamide PA12 powder grades on the microstructures of laser sintered part. In: 2015 3rd Asia Conference on Mechanical and Materials Engineering (ACMME 2015), 23rd-24th July 2015, Chengdu, Sichuan, China.

Fauzi, Fatin Bazilah and Ani, Mohd Hanafi and Othman, Raihan and Ahmad Azhar, Ahmad Zahirani and Mohamed, Mohd Ambri and Herman, Sukreen Hana (2015) Fabrication of flexible Au/ZnO/ITO/PET memristor using dilute electrodeposition method. In: 4th International Conference on Electronic Devices, Systems and Applications 2015 (ICEDSA), 14th - 15th December 2014, Kuala Lumpur.

Ani, Mohd Hanafi and Muhamad Ali, Abu Hanifah and Mohamed, Mohd Ambri (2014) Channel length effect on the saturation current and the threshold voltages of CNTFET. In: 11th IEEE International Conference on Semiconductor Electronics, ICSE 2014, 27 - 29 August 2014, Berjaya Times Square Hotel Kuala Lumpur; Malaysia.

Mohamed, Mohd Ambri and Majlis, Yeop Burhanuddin and Ani, Mohd Hanafi (2014) Electronic state transition in cooperatively interacting point-defects in semiconductor crystals. In: 11th IEEE International Conference on Semiconductor Electronics, ICSE 2014, 27 - 29 August 2014, Berjaya Times Square Hotel Kuala Lumpur; Malaysia.

Nor Hairin, Assayidatul Laila and Othman, Raihan and Ani, Mohd Hanafi and Saputra, Hens and Yahya, Muhd Zu Azhan (2012) Evaluation of porous electrode properties using metal-air electrochemical system. In: 1st International Conference on Energy and Environmental Protection, ICEEP 2012, 23rd-24th June 2012, Hohhot, China.

Akhbar, Kaderi and Ani, Mohd Hanafi and Othman, Raihan and Mohd Zainal, Ahmad Zaki (2011) Observation on void formed in oxide scale of Fe-Cr-Ni alloy at 1073K in dry and humid environments. In: 2nd International Conference on Mechanical and Manufacturing Engineering 2011 (ICME 2011), 6-7th June 2011, Perbadanan Putrajaya Complex, Putrajaya. (Unpublished)

Ani, Mohd Hanafi and Ueda, Mitsutoshi and Kawamura, Kenichi and Maruyama, Toshio (2010) Evaluation of oxygen surface potential at early stage of oxidation in dry and water vapor condition at 1073 K. In: International Symposium on High Temperature Oxidation and Corrosion (ISHOC) 2010, 8-11th November 2010, Zushi, Japan. (Unpublished)

Nor Hairin, Assayidatul Laila and Hens, Saputra and Ani, Mohd Hanafi and Othman, Raihan (2010) Optimization of zinc electrodeposition from zinc-air cell discharge performance. In: 3rd International Conference on Functional Materials and Devices 2010, 13-17 June 2010, Kuala Terengganu, Terengganu, Malaysia. (Unpublished)

Hens, Saputra and Sutjipto, Agus Geter Edy and Muhida, Riza and Ani, Mohd Hanafi and Othman, Raihan (2010) Preparation and characterization of inorganic MCM-41 membrane for zinc-air microbattery. In: 3rd International Conference on Functional Materials and Devices (ICFMD 2010), 13-17 June 2010, Kuala Terengganu, Malaysia. (Unpublished)

Meskon, Shahrul Razi and Sutjipto, Agus Geter Edy and Ani, Mohd Hanafi and Othman, Raihan (2010) RF magnetron sputtered YSZ thin film: Fabrication and characterizations. In: 3rd International Conference on Functional Materials and Devices 2010, 13-17 June 2010, Kuala Terengganu, Terengganu, Malaysia. (Unpublished)

Ani, Mohd Hanafi and Setiawan, Asep Ridwan and Hens, Saputra and Othman, Raihan and Ueda, Mitsutoshi and Kawamura, Kenichi and Maruyama, Toshio (2010) Increase of oxygen permeability on metal/oxide interface during high temperature oxidation of Fe-Cr alloys in water vapor at 1073 K. In: 3rd International Conference on Functional Materials and Devices 2010, 13-17 June 2010, Kuala Terengganu. (Unpublished)

Ani, Mohd Hanafi and Othman, Raihan and Ueda, Mitsutoshi and Kawamura, Kenichi and Maruyama, Toshio (2010) In-situ method to monitor surface reaction/oxidation at high temperature. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010), 26 - 27 January 2010, Kuala Lumpur.

Monograph

Suryanto, - and Ani, Mohd Hanafi and Yaacob, Iskandar Idris and Haider I., Farag (2018) FUNDAMENTAL STUDY ON METAL DUSTING PREVENTION OF AISI 316 STAINLESS STEELS BY USING COPPER COATING. Project Report. UNSPECIFIED. (Unpublished)

Maleque, Md. Abdul and Ani, Mohd Hanafi and Samat, Noorasikin and Ahmed, Abu Saleh and Rahman, Md Mustafizur (2016) Characterization of Tribo-corrosion using jatropha curcas linnaeas biodiesel for automotive engine component materials. Project Report. UNSPECIFIED, Kuala Lumpur. (Unpublished)

Ani, Mohd Hanafi and Othman, Raihan (2012) The effects of water vapor on high temperature oxidation of Fe-Cr-Ni alloy at 1073k. Research Report. s.n., Kuala Lumpur. (Unpublished)

This list was generated on Wed Apr 24 04:56:28 2024 +08.

Export as	Atom RSS 1.0 RSS 2.0