Items where Author is "Ali, Mohammad Yeakub"

Alam, Mohammad Shafiul and Rashid, Muhammad Mahbubur and Ali, Mohammad Yeakub and Yvette, Susiapan (2024) Addressing the challenge of dataset acquisition for ASD diagnosis with deep learning-based neural networks. In: 5th International Conference on Sustainable Innovation in Engineering and Technology 2023, 16 August 2023, Kuala Lumpur, Malaysia.

Rashid, Muhammad Mahbubur and Alam, Mohammad Shafiul and Ali, Mohammad Yeakub and Yvette, Susiapan (2024) Developing a multi-modal dataset for deep learning-based neural networks in autism spectrum disorder diagnosis. In: Proceedings of 5th International Conference on Sustainable Innovation in Engineering and Technology 2023, Kuala Lumpur, Malaysia.

Rashid, Muhammad Mahbubur and Alam, Mohammad Shafiul and Haque, M A and Ali, Mohammad Yeakub and Yvette, Susiapan (2024) Effect of different modalities of facial images for diagnosis of ASD by deep neural network. In: Proceedings of 5th International Conference on Sustainable Innovation in Engineering and Technology 2023, 16 August 2023, Kuala Lumpur, Malaysia.

Alam, Mohammad Shafiul and Rashid, Muhammad Mahbubur and Ali, Mohammad Yeakub and Yvette, Susiapan (2024) Employing explainability on facial landmarks for autism spectrum disorder diagnosis using deep CNN. In: 5th International Conference on Sustainable Innovation in Engineering and Technology 2023, SIET 2023, 16 August 2023, Kuala Lumpur, Malaysia.

Syed Munimus, Salam and Rashid, Muhammad Mahbubur and Ali, Mohammad Yeakub and Yvette, Susiapan (2024) Exploring the potential of artificial intelligence based flywheels as energy-saving devices in industrial settings. In: 5th International Conference on Sustainable Innovation in Engineering and Technology 2023, 16 August 2023, Kuala Lumpur, Malaysia.

Al Hazza, Muataz Hazza Faizi and Zahari, Syahir and Bourini, Islam and Ismail, Md Yusof and Ali, Mohammad Yeakub and Adesta, Erry Y. T. (2023) Lean manufacturing and six sigma principles implementation in the industry: case study. In: 5th International Conference on Advances in Manufacturing and Materials Engineering (ICAMME2022), 9th - 10th August 2022, Online Conference.

Rashid, Muhammad Mahbubur and Ali, Mohammad Yeakub and Ul Islam, Rafi (2023) Energy saving capability of variable inertia Magneto-Rheological (MR) flywheel. In: 8th Brunei International Conference on Engineering and Technology 2021 (BICET2021), 8-10 November 2021, Universiti Teknologi Brunei ( Virtual ).

Rashid, Muhammad Mahbubur and Ali, Mohammad Yeakub and Hasan, Muhammad Hasibul and Mokthar, Nur Syamimi (2023) Optimization of a reliable grid-connected PV-based power plant. In: 8th Brunei International Conference on Engineering and Technology 2021 (BICET2021), 8th - 10th November 2021, Bandar Seri Begawan (Virtual).

Rashid, Muhammad Mahbubur and Ali, Mohammad Yeakub and Sailan, Saeed (2023) Service robot using voice recognition. In: 8th Brunei International Conference on Engineering and Technology 2021 (BICET2021), 8-10 November 2021, Universiti Teknologi Brunei (Virtual).

Rashid, Muhammad Mahbubur and Ali, Mohammad Yeakub and Syed Nasir, Sharifah Sai’dah (2023) An adaptive upper-limb stroke rehabilitation system. In: 8th Brunei International Conference on Engineering and Technology 2021 (BICET2021), 8-10 Nov 2021, Universiti Teknologi Brunei ( Virtual ).

Maleque, Md. Abdul and Masjuki, H. H. and Low, K. O. and Ali, Mohammad Yeakub (2023) Sustainable eSiC reinforced composite materials – synthetization and characterization. In: 8th Brunei International Conference on Engineering and Technology 2021 (BICET2021), 8-10 November 2021, Universiti Teknologi Brunei (Virtual).

Maleque, Md. Abdul and Hassan, Masjuki and K.O., Low and Ali, Mohammad Yeakub (2021) Sustainable eSiC reinforced composite materials – synthetization and characterization. In: 8th Brunei International Conference on Engineering and Technology 2021 (BICET2021), 8-10 November, Universiti Teknologi Brunei ( Virtual ). (Unpublished)

Fuhaid, Mutlag Shafi and Krishnan, Pradeep Kumar and Maleque, Md. Abdul and Murali, R V and Ali, Mohammad Yeakub (2020) Manufacturing and friction welding of aluminium matrix composites – review of current status and future directions. TEST Engineering & Management, 83 (May-June). pp. 1122-1130. ISSN 0193-4120

Hussin, Muhammad Shaffiq and Ali, Mohammad Yeakub and Banu, Asfana and Abdul Rahman, Mohamed and Chowdhury, Md. Sazzad Hossien (2020) Investigation of vibration in micromilling with MQL: S/N ratio analysis. TEST Engineering & Management, 83 (May-June). pp. 1026-1032. ISSN 0193-4120

Abdullahi, Umma and Maleque, Md. Abdul and Ali, Mohammad Yeakub (2020) Hardness behaviour of carbon nanotube-aluminium nano-composite using nanoindentation technique. Materials Today: Proceedings, xx (xx). pp. 1-5. E-ISSN 2214-7853 (In Press)

Abdullahi, Umma and Bello, Kamilu Adeyemi and Maleque, Md. Abdul and Yaacob, Iskandar Idris and Ali, Mohammad Yeakub and Nirmal, Umar (2020) Friction coefficient of carbon nanotube reinforced aluminium nano-composite. Nigerian Journal of Engineering, 27 (1). pp. 25-35. ISSN 0794-4756 E-ISSN 2705-3954

Banu, Asfana and Ali, Mohammad Yeakub and Abd. Rahman, Mohamed and Konneh, Mohamed (2020) Stability of micro dry wire EDM: OFAT and DOE method: OFAT and DOE method. International Journal of Advanced Manufacturing Technology, 106 (9-10). pp. 4247-4261. ISSN 02683768

Musa, Moh H.A. and Md. Abdul, Maleque and Ali, Mohammad Yeakub (2020) Heat affected zone morphology of TIG torch welded HSLA steel in presence of Ti and V microalloying elements. In: Encyclopedia of renewable and sustainable materials. Elsevier, UK, pp. 439-444. ISBN 780128131954

Al Hazza, Muataz Hazza F. and Ali, Mohammad Yeakub and Juraimi, N. A and Adesta, Erry Y. T. (2020) Assessment of flank wear and tool life in high speed face milling under dry and near dry machining. In: 5th North American International Conference on Industrial Engineering and Operations Management, 10th-14h August 2020, Detroit, MI, USA.

Al Hazza, Muataz Hazza F. and Ali, Mohammad Yeakub and Omer, T.M. and Juraimi, N. A and Adesta, Erry Yulian Triblas (2020) Flank wear prediction in high-speed face milling using Monte Carlo simulation method. In: 5th North American International Conference on Industrial Engineering and Operations Management, 10th-14h August 2020, Detroit, MI, USA.

Banu, Asfana and Ali, Mohammad Yeakub and Abd Rahman, Md Nizam and Konneh, Mohamed (2019) Investigation of process parameters for stable micro dry wire electrical discharge machining. International Journal of Advanced Manufacturing Technology, 103 (1-4). pp. 723-741. ISSN 0268-3768 E-ISSN 1433-3015

Al Hazza, Muataz Hazza Faizi and Endut, Amalina and Adesta, Erry Yulian Triblas and Ibrahim, Nur A B and Ali, Mohammad Yeakub (2018) Statistical analysis of energy absorption in aluminum foam sandwich under impact testing using the Taguchi design. In: Reference module in materials science and materials engineering. Elsevier, pp. 1-6.

Jarin, Sams and Saleh, Tanveer and Muthalif, Asan G. A. and Ali, Mohammad Yeakub and Bhuiyan, Moinul (2018) Towards achieving nanofinish on silicon (Si) wafer by μ-wire electro-discharge machining. International Journal of Advanced Manufacturing Technology, 99 (9). pp. 3005-3015. ISSN 0268-3768 E-ISSN 1433-3015

Chowdhury, Md. Sazzad Hossien and Hosen, Md. Alal and Ali, Mohammad Yeakub and Ismail, Ahmad Faris (2018) An analytical technique to obtain higher-order approximate periods for the nonlinear oscillator. IIUM Engineering Journal, 19 (2). pp. 182-191. ISSN 1511-788X E-ISSN 2289-7860

Ali, Mohammad Yeakub and Banu, Asfana and Abd. Rahman, Mohamed and Hazza Faizi Al Hazza, Muataz and Adesta, Erry Yulian Triblas (2018) Precision control of kerf in metal cutting using dry micro WEDM: issues and challenges. In: 8th International Conference on Key Engineering Materials (ICKEM 2018), 16th-18th March 2018, Osaka, Japan.

Ali, Mohammad Yeakub (2018) Dry electrical discharge machining: an environmental friendly machining process. In: 2018 9th International Conference on Manufacturing Science and Technology (ICMST 2018), 11th-13th August 2018, Kuala Lumpur. (Unpublished)

Konneh, Mohamed and Bagum, Mst. Nasima and Ali, Mohammad Yeakub and Amin, A. K. M. Nurul (2018) Surface morphology study in high speed milling of soda lime glass. In: 3rd International Conference on the Science and Engineering of Materials (ICoSEM 2017), 24th-25th Oct. 2017, Kuala Lumpur.

Munshi, Adnan and Sulaeman, Erwin and Omar, Norfazzila and Ali, Mohammad Yeakub (2018) CFD analysis on the effect of winglet cant angle on aerodynamics of ONERA M6 wing. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 45 (1). pp. 44-54. ISSN 2289-7879

Ali, Mohammad Yeakub and Sabur, Abdus and Banu, Asfana and Maleque, Md. Abdul and Adesta, Erry Yulian Triblas (2018) Micro electro discharge machining of nonconductive ceramic. International Journal of Engineering Materials and Manufacture, 3 (1). pp. 55-62. E-ISSN 0128-1852

Ali, Mohammad Yeakub and Banu, Asfana and Salehan, Muhammad and Adesta, Erry Yulian Triblas and Hazza Faizi Al Hazza, Muataz and Shaffiq, Muhammad (2018) Dimensional accuracy in dry micro wire electrical discharge machining. Journal of Mechanical Engineering and Sciences, 12 (1). pp. 3321-3329. ISSN 2289-4659 E-ISSN 2231-8380

Bagum, Mst. Nasima and Konneh, Mohamed and Ali, Mohammad Yeakub (2018) Establishing relationship between process parameters and temperature during high speed end milling of soda lime glass. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8 - 9 August 2017, International Islamic University Malaysia (IIUM), Gombak Campus, Kuala Lumpur.

Hanash, Ebrahim and Ali, Mohammad Yeakub (2018) Experimental study of electrical discharge drilling of stainless steel UNS S30400. In: "International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017", 8-9 August 2017, International Islamic University Malaysia (IIUM), Gombak Campus, Kuala Lumpur.

Ali, Mohammad Yeakub and Banu, Asfana and Bakar, Mazilah Abu (2018) Influence of Wire Electrical Discharge Machining (WEDM) process parameters on surface roughness. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017), 8th–9th August 2017, Kuala Lumpur.

Ali, Mohammad Yeakub and Maleque, Md. Abdul and Banu, Asfana and Sabur, Abdus and Debnath, Sujan (2018) Micro electro discharge machining of non-conductive ceramic. In: 8th International Conference on Manufacturing Science and Technology (ICMST 2017), 23rd-25th July 2017, Hong Kong, China.

Hosen, Md. Alal and Chowdhury, Md. Sazzad Hossien and Ali, Mohammad Yeakub and Ismail, Ahmad Faris (2018) Analytical approximations for the oscillators with anti-symmetric quadratic nonlinearity. In: 4th International Conference on Mathematical Applications in Engineering 2017 (ICMAE'17), 8th–9th August 2017, Kuala Lumpur, Malaysia.

Bagum, Mst. Nasima and Konneh, Mohamed and Abdullah, Kasim Abdulrahman. . and Ali, Mohammad Yeakub (2018) Chip morphology as a performance predictor during high speed end milling of soda lime glass. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8 - 9 August 2017, International Islamic University Malaysia (IIUM), Gombak CampusKuala Lumpur.

Musa, Mukhtaruddin Iqbal A. and Maleque, Md. Abdul and Ali, Mohammad Yeakub (2018) An investigation of TIG welding parameters on microhardness and microstructure of heat affected zone of HSLA steel. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017), 8th–9th August 2017, Kuala Lumpur, Malaysia.

Chowdhury, Ahmed Ghalib Khan and Ali, Mohammad Yeakub and Banu, Asfana (2018) Analysis of corner radius in dry micro WEDM. International Journal of Mechanical Engineering and Robotics Research. pp. 1-4. ISSN 2278-0149 (In Press)

Abdullahi, Umma and Maleque, Md. Abdul and Ali, Mohammad Yeakub (2018) Characterization of carbon nanotube reinforced aluminium nano-composite using field emission scanning electron microscope. International Journal of Engineering Materials and Manufacture, 3 (1). pp. 73-77. E-ISSN 0128-1852

Ali, Mohammad Yeakub and Banu, Asfana and Shaffiq, Muhammad and Abd. Rahman, Mohamed and Konneh, Mohamed and Salehan, Muhammad (2018) Investigation of taper angle in dry micro wire EDM. International Journal of Mechanical Engineering and Robotics Research. pp. 1-4. E-ISSN 2278-0149 (In Press)

Nabinejad, Omid and Debnath, Sujan and Beh, Jack Kai and Ali, Mohammad Yeakub (2018) Mechanical performance and moisture absorption of unidirectional bamboo fiber polyester composite. In: 8th International Conference on Manufacturing Science and Technology, ICMST 2017, 23-25 June 2017, Hong Kong.

Ali, Mohammad Yeakub and Sabur, Abdus and Maleque, Md. Abdul (2018) Micro electro discharge machining of nonconductive ceramic: the issue of spalling. International Journal of Engineering and Technology, 7 (3). pp. 32-39. E-ISSN 2227-524X

Konneh, Mohamed and Bagum, Mst. Nasima and Ali, Mohammad Yeakub and Mohamed Ariff, Tasnim Firdaus (2018) Tool wear mechanisms during cutting of soda lime glass. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017), 8-9 August 2017, Kuala Lumpur, Malaysia.

Hosen, Md. Alal and Chowdhury, Md. Sazzad Hossien and Ali, Mohammad Yeakub and Ismail, Ahmad Faris (2018) A new analytical technique for solving nonlinear non-smooth oscillators based on the rational harmonic balance method. In: Second International Conference on the Future of ASEAN (ICoFA) 2017, 15-16 August 2017, Kangar, Perlis.

Ali, Mohammad Yeakub and Banu, Asfana and Hazza Faizi Al Hazza, Muataz and Adesta, Erry Yulian Triblas (2017) Present and future research trend in electro discharge machining. In: 3rd International Conference on Mechanical, Industrial and Materials Engineering 2017 (ICMIME2017), 28th-30th Dec. 2017, Rajshahi.

Banu, Asfana and Bakar, Mazilah Abu and Ali, Mohammad Yeakub and Adesta, Erry Yulian Triblas (2017) Analysis of WEDM process parameters on surface roughness and kerf using Taguchi method. International Journal of Engineering Materials and Manufacture, 2 (4). pp. 103-109. E-ISSN 0128-1852

Ali, Mohammad Yeakub (2017) Micro electro discharge machining for nonconductive ceramic materials. In: 2nd World Symposium on Mechanical and Control Engineering (WSMCE 2017), 2nd-3rd Dec. 2017, Guilin, China. (Unpublished)

Ali, Mohammad Yeakub and Moudood, M. A. and Maleque, Md. Abdul and Hazza Faizi Al Hazza, Muataz and Adesta, Erry Yulian Triblas (2017) Electro-discharge machining of alumina: investigation of material removal rate and surface roughness. Journal of Mechanical Engineering and Sciences (JMES), 11 (4). pp. 3015-3026. ISSN 2289-4659 E-ISSN 2231-8380

Chowdhury, Md. Sazzad Hossien and Hosen, Md. Alal and Ahmad, Kartini and Ali, Mohammad Yeakub and Ismail, Ahmad Faris (2017) High-order approximate solutions of strongly nonlinear cubic-quintic Duffing oscillator based on the harmonic balance method. Results in Physics, 7. pp. 3962-3967. E-ISSN 2211-3797

Ali, Mohammad Yeakub and Sabur, Abdus and Maleque, Md. Abdul (2017) Influence of nano powder mixed dielectric fluid on surface finish in micro electro discharge machining of zirconia. Current Nanomaterials, 2 (2). pp. 90-94. ISSN 2405-4623

Musa, Hussin Abdullrhman and Maleque, Md. Abdul and Ali, Mohammad Yeakub (2017) Effect of process parameters on microhardness and microstructure of heat affected zone in TIG welded X65-HSLA steel. In: International Conference on Advances in Manufacturing & Materials Engineering (ICAMME) 2017, 8th-9th Aug. 2017, Kuala Lumpur. (Unpublished)

Jarin, Sams and Saleh, Tanveer and Asan Gani, Abdul Muthalif and Ali, Mohammad Yeakub (2017) An experimental investigation on the effect of nanopowder for micro-wire electro discharge machining of gold coated silicon. In: Advances in Materials and Processing Technologies, 2016 (AMPT 2016), 8-11 Nov 2016, Kuala Lumpur.

Chowdhury, Md. Sazzad Hossien and Hosen, Md. Alal and Ali, Mohammad Yeakub and Ismail, Ahmad Faris (2017) Higher-order analytical solutions for the equation of motion of a particle on a rotating parabola. In: 4th International Conference on Mathematical Sciences - Mathematical Sciences: Championing the Way in a Problem Based and Data Driven Society, ICMS 2016, 15-17 Nov 2017, Putrajaya, Malaysia.

Ali, Mohammad Yeakub and Abd. Rahman, Mohamed and Zunairi, Siti Nur Zuhaida and Banu, Asfana (2017) Dimensional accuracy of micro-electro discharge milling. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25th-27th July 2016, Kuala Lumpur, Malaysia.

Abd. Rahman, Mohamed and Ali, Mohammad Yeakub and Khairuddin, Amir Saddam (2017) Effects on vibration and surface roughness in high speed micro end-milling of Inconel 718 with minimum quantity lubrication. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25th-27th July 2016, Kuala Lumpur, Malaysia.

Ali, Mohammad Yeakub and Khamarruzaman, Siti Nur Zalikha and Banu, Asfana (2017) Investigation of kerf in micro wire electro discharge machining. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25th-27th July 2016, Kuala Lumpur, Malaysia.

Abd. Rahman, Mohamed and Ali, Mohammad Yeakub and Rosli, Abdul Rahman Shah and Banu, Asfana (2017) Process capability of high speed micro end-milling of Inconel 718 with minimum quantity lubrication. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25th-27th July 2016, Kuala Lumpur, Malaysia.

Ali, Mohammad Yeakub and Abd. Rahman, Mohamed and Nordin, Rosmarina (2017) Micro wire electro discharge grinding: optimization of material removal rate and surface roughness. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering, ICMAAE 2016, 25 – 27 July 2016, Kulliyyah of Engineering, IIUM, Kuala Lumpur.

Ali, Mohammad Yeakub and Jailani, Wan Norsyazila and Abd Rahman, Mohamed and Hassan, Muhammad Hasibul and Banu, Asfana (2017) Effect of minimum quantity lubrication on surface roughness in tool-based micromilling. IIUM Engineering Journal, 18 (1). pp. 147-154. ISSN 1511-788X E-ISSN 2289-7860

Chowdhury, Md. Sazzad Hossien and Hosen, Md Alal and Ali, Mohammad Yeakub and Ismail, Ahmad Faris (2017) Higher-order analytical solutions for the equation of motion of a particle on a rotating parabola. In: 4th International Conference on Mathematical Sciences, 15-17 Nov 2016, Putrajaya, Malaysia.

Khan, Ahsan Ali and Al Hazza, Muataz Hazza Faizi and Mohiuddin, A. K. M. and Ali, Mohammad Yeakub (2017) Influence of the angle of cut of workpiece on taper and corner roundness during Wire Electrical Discharge Machining (WEDM). International Review of Mechanical Engineering (IREME), 11 (3). pp. 208-212. ISSN 1970-8734 E-ISSN 2532-5655

Maleque, Md. Abdul and Wan Yusoff, Wan Ahmad Yusmawiza and Samat, Noorasikin and Ali, Mohammad Yeakub and Rahman, Md Mustafizur and Adetayo A., Adebisi (2017) Prototype development of light weight aluminium matrix composite automotive brake rotor. Project Report. UNSPECIFIED. (Unpublished)

Hosen, Md. Alal and Chowdhury, Md. Sazzad Hossien and Ali, Mohammad Yeakub and Ismail, Ahmad Faris (2017) An analytical approximation technique for the duffing oscillator based on the energy balance method. Italian Journal of Pure and Applied Mathematics, 37. pp. 455-466. ISSN 1126-8042

Jarin, Sams and Saleh, Tanveer and Bhuiyan, Moinul and Muthalif, Asan G. A. and Ali, Mohammad Yeakub (2017) An improved machining process of polished silicon using nano powder mixed micro-wire electro discharge machining. In: 2017 World Congress on Micro and Nano Manufacturing, 27th-30th March 2017, Kaohsiang, Taiwan.

Banu, Asfana and Ali, Mohammad Yeakub (2016) Electrical discharge machining (EDM): A review. International Journal of Engineering Materials and Manufacture, 1 (1). pp. 3-10. E-ISSN 0128-1852

Abdullrhman Hossin, Musa and Maleque, Md. Abdul and Ali, Mohammad Yeakub (2016) Surface modification of HSLA steel and its fracture behavior. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2016), 25th-27th July 2016, Kuala Lumpur, Malaysia. (Unpublished)

Khan, Ahsan Ali and Al Hazza, Muataz Hazza Faizi and Che Daud, Mohd Radzi and Ali , Mohammad Yeakub and Jamingan, Hazira (2016) Analyzing and modeling the influence of workpiece thickness on geometry of slot machining wire EDMs. In: 2015 4th International Conference on Advanced Computer Science Applications and Technologies (ACSAT 2015), 8th-10th Dec. 2015, Kuala Lumpur.

Adebisi, Adetayo Abdulmumin and Maleque, Md. Abdul and Ali, Mohammad Yeakub and Bello, Kamil Adeyemi (2016) Effect of variable particle size reinforcement on mechanical and wear properties of 6061Al–SiCp composite. Composite Interfaces, 23 (6). pp. 533-547. ISSN 0927-6440 E-ISSN 1568-5543

Al Hazza, Muataz Hazza Faizi and Khan, Ahsan Ali and Ali , Mohammad Yeakub (2016) Exploration of EDM assisted CNT in micro machining using statistical approach. In: 2015 4th International Conference on Advanced Computer Science Applications and Technologies (ACSAT 2015), 8th-10th Dec. 2015, Kuala Lumpur.

Ali , Mohammad Yeakub and Abd. Rahman, Mohamed and Banu, Asfana and Adnan, Shakira and Nadia, Fatin (2016) High aspect ratio micro-EDM drilling with nano surface finish. In: The Regional Conference on Science, Technology and Social Sciences 2014 (RCSTSS 2014), 23rd-25th Nov. 2014, Cameron Highland, Pahang.

Ali, Mohammad Yeakub and Suieb, Ali Nurhanim and Mohamad Asharaf, Asfana Banu (2016) Micro electro discharge machining of non-conductive ceramic using conductive powder mix dielectric fluid. Journal of Engineering and Applied Sciences, 11 (7). pp. 1469-1474. ISSN 1816-949X E-ISSN 1818-7803

Ali, Mohammad Yeakub and Hung, Wayne N.P. (2016) Micromachining. In: Comprehensive materials finishing. Elsevier, pp. 322-343. ISBN 9780128032497

Hosen, Md. Alal and Chowdhury, Md. Sazzad Hossien and Ali, Mohammad Yeakub and Ismail, Ahmad Faris (2016) A comparison study on the harmonic balance method and rational harmonic balance method for the Duffing-harmonic oscillator. Global Journal of Pure and Applied Mathematics, 12 (3). pp. 2721-2732. ISSN 0973-1768 E-ISSN 0973-9750

Hosen, Md. Alal and Chowdhury, Md. Sazzad Hossien and Ali, Mohammad Yeakub and Ismail, Ahmad Faris (2016) A novel analytical approximation technique for highly nonlinear oscillators based on the energy balance method. Results in Physics, 6. pp. 496-504. ISSN 2211-3797

Mohd Shahar, Siti Fatimah and Jaafar, Israd Hakim and Ali, Mohammad Yeakub (2015) Parametric study of sputtering microchannels via focused ion beam (FIB). ARPN Journal of Engineering and Applied Sciences, 10 (23). pp. 17397-17401. ISSN 1819-6608

Adebisi, Adetayo A. and Maleque, Md. Abdul and Ali , Mohammad Yeakub and Bello, Kamilu Adeyemi (2015) Influence of single and multiple particle size variation on mechanical and wear behaviour of aluminium silicon carbide composites. In: Malaysian International Tribology Conference 2015, 16th-17th Nov. 2015, Penang, Malaysia.

Maleque, Md. Abdul and Belal, Ahmed Ghazal and Ali, Mohammad Yeakub and Al-razzouk, Maan Hayyan and Ahmed, Abu Saleh (2015) Corrosion of surface modified AISI 4340 steel in jatropha biodiesel. Advanced Materials Research, 1115. pp. 243-246. ISSN 1022-6680

Moudood, M. A. and Sabur, Abdus and Ali, Mohammad Yeakub and Jaafar, Israd Hakim (2015) Effect of gap voltage and pulse-on time on material removal rate for electrical discharge machining of Al2O3. Advanced Materials Research, 1115. pp. 3-6. ISSN 1662-8985

Al Hazza, Muataz Hazza Faizi and Khan, Ahsan Ali and Ali, Mohammad Yeakub (2015) Exploration of EDM assisted CNT in micro machining using statistical approach. In: 4th International Conference on Advanced Computer Science Applications and Technologies, 8-10 December 2015, Kuala Lumpur, Malaysia.

Maleque, M. H. A. Musa and Maleque, Md. Abdul and Ali, Mohammad Yeakub and Hasan, Muhammad Hasibul (2015) Fracture behavior issues in HSLA pipeline steels - a review. Advanced Materials Research, 1115. pp. 207-2012. ISSN 1022-6680

Rahman Azmil, Nur Atiqah and Ali, Mohammad Yeakub and Mohamed, Abd. Rahman and Chowdhury, Md. Sazzad Hossien (2015) Investigation of surface roughness and material removal rate for high speed micro end milling on PMMA. Advanced Materials Research, 1115. pp. 12-15. ISSN 1022-6680

Sabur, Abdus and Syed Mohammed, Mehdi and Ali, Mohammad Yeakub and Maleque, Md. Abdul and Moudood, M. A. (2015) Investigation of surface roughness in micro-EDM of nonconductive ZrO2 ceramic with powder mixed dielectric fluid. Advanced Materials Research, 1115. pp. 16-19. ISSN 1022-6680

Asfana, Banu and Ali, Mohammad Yeakub and Mohamed, Abd. Rahman and Wayne, N. P. Hung (2015) Material removal rate of zirconia in electro discharge micromachining. Advanced Materials Research, 1115. pp. 20-23. ISSN 1022-6680

Maleque, Md. Abdul and Abdullahi, U. and Ali , Mohammad Yeakub (2015) Morphology of cnt-al nanocomposite under different ball milling parameters. Advanced Materials Research, 1115. pp. 398-401. ISSN 1022-6680

Maleque, Md. Abdul and Ghazal, Belal Ahmed and Ali, Mohammad Yeakub and Hayyan, Maan and Ahmed, Abu Saleh (2015) Wear behaviour of TiC coated AISI 4340 steel produced by TIG surface melting. In: International Conference on Functional Materials and Metallurgy, ICoFM 2014, 17-18 Sep 2014, Pulau Pinang.

Abdulmumin, Adebisi Adetayo and Maleque, Md. Abdul and Ali, Mohammad Yeakub (2015) Wear characteristics of multiple particle size silicon carbide reinforced aluminium composite. Advanced Materials Research, 1115. pp. 174-177. ISSN 1022-6680

Maleque, Md. Abdul and Sabur, Abdus and Moudood, Abdul and Ali, Mohammad Yeakub (2014) Effect of Micro-EDM Parameters on Material Removal Rate of Nonconductive ZrO2 Ceramic. Applied Mechanics and Materials, 465. pp. 1329-1333. ISSN 1660-9336

Moudood, M. A. and Sabur, A. and Ali, Mohammad Yeakub and Jaafar, Israd Hakim (2014) Effect of peak current on material removal rate for electrical discharge machining of non-conductive Al2O3 ceramic. Advanced Materials Research, 845. pp. 730-734. ISSN 1022-6680

Mohd Zain, Zakaria and Ndaliman, Mohammed Baba and Khan, Ahsan Ali and Ali, Mohammad Yeakub (2014) Improving micro-hardness of stainless steel through powder-mixed electrical discharge machining. Journal of Mechanical Engineering Science. pp. 1-7. ISSN 0954-4062

Mohamed, Abd. Rahman and Asfana, Banu and Ali, Mohammad Yeakub (2014) Investigation of recast layer of non-conductive ceramic due to micro-EDM. Advanced Materials Research, 845. pp. 857-861. ISSN 1022-6680

Moudood, M. A. and Sabur, A. and Lutfi, A. and Ali, Mohammad Yeakub and Jaafar, Israd Hakim (2014) Investigation of the machinability of non-conductive zro2 with different tool electrodes in EDM. International Journal of Automotive and Mechanical Engineering (IJAME), 10. pp. 1866-1876. ISSN 1985-9385 (P) 2180-1606(O)

Sabur, Abdus and Ali, Mohammad Yeakub and Maleque, Md. Abdul and Moudood, Abdul (2014) Micro-edm for micro-channel fabrication on nonconductive ZrO2 ceramic. International Journal of Automotive and Mechanical Engineering (IJAME), 10 (1). pp. 1841-1851. ISSN 1985-9385 (P) 2180-1606(O)

Banu, Asfana and Ali, Mohammad Yeakub and Abd. Rahman, Mohamed (2014) Micro-electro discharge machining of nonconductive zirconia ceramic: investigation of MRR and recast layer hardness. The International Journal of Advanced Manufacturing Technology, 75 (1-4). pp. 257-267. ISSN 0268-3768 E-ISSN 1433-3015

Mohamed, Abd. Rahman and Atiqah, N. and Ali, Mohammad Yeakub and Chowdhury, M. S. H. (2013) Tool vibration due to high speed micro end milling parameters. Applied Mechanics and Materials, 372. pp. 364-368. ISSN 1660-9336

Abdullah, Umma and Maleque, Md. Abdul and Yaacob, Iskandar Idris and Ali, Mohammad Yeakub (2013) Characterization of carbon nanotube aluminium nano composite- effect of ball milling time on particle size. International Journal of Academic Research. Part A. Applied and Natural Sciences, 5 (2). pp. 91-93.

Abdullah, Umma and Maleque, Md. Abdul and Yaacob, Iskandar Idris and Ali, Mohammad Yeakub (2013) Effect of ball milling parameters on the synthesization of carbon nanotube aluminium nano composite. Advanced Materials Research, 626. pp. 537-541. ISSN 1022-6680

Ali, Mohammad Yeakub and Mohamed, Abd. Rahman and Khan, Ahsan Ali and Asfana, Banu and Lutfi, M. and Fahmi, M. I. (2013) Empirical modelling of vibration in micro end milling of PMMA. World Applied Sciences Journal , 21 (1). pp. 73-78. ISSN 1818-4952

Ali, Mohammad Yeakub and Mohamed, Abd. Rahman and Fadila, N. and Hannah, N. (2013) Investigation of burr in high speed microdrilling. Applied Mechanics and Materials, 278. pp. 389-392. ISSN 1660-9336

Sabur, Abdus and Ali, Mohammad Yeakub and Maleque, Md. Abdul and Khan, Ahsan Ali (2013) Investigation of material removal characteristics in EDM of nonconductive ZrO2 ceramic. Procedia Engineering, 56. pp. 696-701. ISSN 1877-7058

Sabur, Abdus and A., Moudood and Ali, Mohammad Yeakub and Maleque, Md. Abdul (2013) Investigation of surface roughness in micro-electro discharge machining of nonconductive ZrO2 for MEMS application. IOP Conference Series: Materials Science and Engineering, 53 (2013). pp. 1-5. ISSN 1757-8981

Sabur, Abdus and Ali, Mohammad Yeakub and Maleque, Md. Abdul (2013) Modelling of material removal rate in EDM of nonconductive ZrO2 ceramic by Taguchi method. In: International Conference on Advances in Mechanical Engineering 2013, ICAME 2013, 28-29 August 2013, Hotel Equatorial , Malacca.

Al Hazza, Muataz Hazza Faizi and Ndaliman, Mohammed Baba and Ali, Mohammad Yeakub and Khan, Ahsan Ali (2013) Simulating the electrical and thermal conductivity in EDM die sinking of Cu-TaC compact electrodes using neural network. In: International Conference on Advanced Computer Science Applications and Technologies 2013, 22-24 December 2013, Kuching, Sarawak.

Ali, Mohammad Yeakub and Mohamed, Abd. Rahman and Asfana, Banu and Roslan, Lutfi and Fahmi, M. I. (2012) Investigation of vibration and surface roughness in micro milling of PMMA. Applied Mechanics and Materials, 217/19. pp. 2187-2193. ISSN 1660-9336

Rahman Azmil, Nur Atiqah and Jaafar, Israd Hakim and Ali, Mohammad Yeakub and Asfana, Banu (2012) Application of focused ion beam micromachining: a review. Advanced Materials Research, 576. pp. 507-510. ISSN 1022-6680

Ali, Mohammad Yeakub and Willey, Liew Yun Hsien and Gure, S. A. and Asfana, Banu (2012) Influence of energy parameters of micro WEDM on kerf. Advanced Materials Research, 576. pp. 527-530. ISSN 1022-6680

Al-Ghamdi, Ahmed S. and Ali, Mohammad Yeakub (2012) Mechanical performance and water absorption resistance of HIPS/MWCNTs nanocomposite. Advanced Materials Research, 576. pp. 421-424. ISSN 1022-6680

Mohamed Ariff, Tasnim Firdaus and Sabiyah, Mohamad Yazid and Adam, Mohd Amirul and Nor, Mohd Anuar (2012) Eco-friendly machining of T6061 aluminium alloy using titanium carbonitride (TiCN) coated tools. Advanced Materials Research, 576. pp. 675-678. ISSN 1022-6680

Karim, A.N. Mustafizul and Jaafar, Abdul Azim and Abdullah, Muhammad Abdullah and Haque, Mahbubul and Ali, Mohammad Yeakub and Amri, Siti Amy Azline (2012) Applying value stream mapping for productivity improvement of a metal stamping industry. Advanced Materials Research, 576. pp. 727-730. ISSN 1022-6680

Khan, Ahsan Ali and Ndaliman , Mohammed Baba and Ali , Mohammad Yeakub and Mansor, Mas Hafizah and Idrus, Nurul-Ain (2012) Surface modification by EDM using CO-CR sintered powder metallurgy electrod. In: IIUM Engineering Congress 2012, 3 - 5 July 2012, Kuala Lumpur, Malaysia. (Unpublished)

Rahman, Mustafizur and Adesta, Erry Yulian Triblas and Ali, Mohammad Yeakub and Karim, A. N. Mustafizul and Maleque, Md. Abdul and Anuar, Hazleen and Ariff, Tasnim Firdaus and Iqbal, Mohammad and Samat, Noorasikin and Hassan, Noor Azlina, eds. (2012) Advances in manufacturing and materials engineering. Advanced Materials Research, 576 . Trans Tech Publications Ltd., , Switzerland. ISBN 978-3-03785-498-3

Debnath, Sujan and Chee, Won Yeo and Rahman, Muhammad Ekhlasur and Reddy, Moola Mohan and Maleque, Md. Abdul and Ali, Mohammad Yeakub (2012) Aluminum-silicon carbide composites for enhanced physio- mechanical properties. Advanced Materials Research, 576. pp. 370-373. ISSN 1022-6680

A., Umma and Maleque, Md. Abdul and Yaacob, Iskandar Idris and Ali, Mohammad Yeakub (2012) Carbon nano tube reinforced aluminium matrix nano-composite: a critical review. Australian Journal of Basic and Applied Sciences, 6 (12). pp. 69-75. ISSN 1991-8178

Adesta, Erry Yulian Triblas and Riza, Muhammad and Ali, Mohammad Yeakub (2012) Cutting force impact to tool life of CT5015 in high speed machining by applying negative rake angles. Applied Mechanics and Materials, 117-19. pp. 633-638. ISSN 1660-9336

Mohd Zain, Zakaria and Mohammed , Baba Ndaliman and Khan, Ahsan Ali and Ali, Mohammad Yeakub (2012) Electro-discharge machining of SUS 304 stainless steel with TaC powder-mixed dielectric. Advanced Materials Research, 576. pp. 72-75. ISSN 1022-6680

Mohammed , Baba Ndaliman and Khan, Ahsan Ali and Ali, Mohammad Yeakub (2012) Formation of nitrides and carbides on titanium alloy surface through EDM. Advanced Materials Research, 576. pp. 7-10. ISSN 1022-6680

Ali, Mohammad Yeakub and Abdul Rahman, Nur Atiqah and Mohamad Aris, Erniyati (2012) Powder mixed micro electro discharge milling of titanium alloy: Investigation of material removal rate. Advanced Materials Research, 383-. pp. 1759-1763. ISSN 1022-6680

Ali, Mohammad Yeakub and Adesta, Erry Yulian Triblas and Abdul Rahman, Nur Atiqah and Mohamad Aris, Erniyati (2012) Powder mixed micro electro discharge milling of titanium alloy: analysis of surface roughness. Advanced Materials Research, 341/42. pp. 142-146. ISSN 1022-6680

Ali, Mohammad Yeakub and Khan, Ahsan Ali and Mohamad Asharaf, Asfana Banu and Abdul Wahab, Adibah (2012) Prediction of minimum chip thickness in tool based micro end milling. International Journal of Integrated Engineering, 4 (1). pp. 6-10. ISSN 2229-838X

Al-Ghamdi, Ahmed S. and Ali, Mohammad Yeakub (2012) Rheological and thermal behaviour of high impact polystyrene nanocomposite. Advanced Materials Research, 383. pp. 3849-3853. ISSN 1022-6680

Khan, Ahsan Ali and Mohammed , Baba Ndaliman and Ali, Mohammad Yeakub and Mansor, Mas Hafizah and Idrus, Nurul-Ain (2012) Surface modification by EDM using Co-Cr sintered powder metallurgy electrode. Advanced Materials Research, 576. pp. 56-59. ISSN 1022-6680

Reddy, M. Mohan and Gorin, Alexander and Abou-El-Hossein, Khaled and Debnath, Sujan and Ali, Mohammad Yeakub and Maleque, Md. Abdul (2012) Tool wear analysis in end milling of advanced ceramics with TiAlN and TiN coated carbide inserts. Advanced Materials Research, 576. pp. 76-79. ISSN 1022-6680

Ali, Mohammad Yeakub and Maleque, Md. Abdul and Banu, A. and N., Atiqah (2011) Investigation of tribological issues in microforming: a review. In: Regional Tribology Conference, 22-24 November 2011, Langkawi, malaysia.

Ali, Mohammad Yeakub (2011) Powder mixed micro electro discharge machining (PMμEDM). Project Report. International Islamic University Malaysia, Kuala Lumpur. (Unpublished)

Khan, Ahsan Ali and Ali, Mohammad Yeakub (2011) Application of silicon carbide in abrasive water jet machining. In: Silicon Carbide. InTech, pp. 431-452. ISBN 9789533079684

Ali, Mohammad Yeakub and Mohd Fuad, Nurul Hajar (2011) Fabrication of silicon nanopillar sheet for Cell Culture Dish. Advanced Materials Research, 264. pp. 1352-1356. ISSN 1022-6680

Mohd Fuad, Nurul Hajar and Ali, Mohammad Yeakub (2011) Investigation of microholes produced by focused ion beam micromachining. Advanced Materials Research, 264. pp. 1346-1351. ISSN 1022-6680

Ali, Mohammad Yeakub (2011) Focused Ion Beam Nanomachining of Cell Culture Sheet (softcopy not yet available). In: Seminar on Focused Ion Beam Nanomachining of Cell Culture Sheet , 15 June 2011, Bangladesh. (Unpublished)

Ali, Mohammad Yeakub (2011) Noble tool based micromilling for nanometric surface finish. Research Report. Ministry of Higher Education, Malaysia, Kuala Lumpur. (Unpublished)

Ali, Mohammad Yeakub (2011) Application of focused ion beam for machining of nanopillar sheet. Research Report. s.n. (Unpublished)

Ali, Mohammad Yeakub and Amin, A. K. M. Nurul and Adesta, Erry Yulian Triblas, eds. (2011) Advanced machining process. IIUM Press, International Islamic University Malaysia, Kuala Lumpur, Malaysia. ISBN 978-967-418-162-8

Amin, A. K. M. Nurul and Adesta, Erry Yulian Triblas and Ali, Mohammad Yeakub, eds. (2011) Advanced machining towards improved machinability of difficult-to-cut materials. IIUM Press, International Islamic University Malaysia, Kuala Lumpur, Malaysia. ISBN 978-967-418-175-8

Amin, A. K. M. Nurul and Zakaria, Ahmad Farhan and -, Syadatul Akma (2011) Application of permanent electromagnet for chatter control in end milling of Titanium alloy - Ti6Al4V. In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, Kuala Lumpur, Malaysia, pp. 99-106. ISBN 9789674181758

Amin, A. K. M. Nurul and Azhari, A. and Mahmud, Md. Asif (2011) Chatter suppression in end milling of Titanium alloy Ti6Al4V applying permanent magnet clamped adjacent to the workpiece. In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, Kuala Lumpur, Malaysia, pp. 107-115. ISBN 9789674181758

Adesta, Erry Yulian Triblas and Ali, Mohammad Yeakub and Amin, A. K. M. Nurul, eds. (2011) Design for manufacture: towards improved manufacturability. IIUM Press, Kuala Lumpur, 0-1. ISBN 9789674181598

Sabur, Abdus and Moudood, M. A. and Ali, Mohammad Yeakub and Maleque, Md. Abdul (2011) Effect of micro-EDM parameters on material removal rate of nonconductive ZrO2 ceramic. Applied Mechanics and Materials, 465-66. pp. 1329-1333. ISSN 1660-9336

Amin, A. K. M. Nurul and Chong , Chee and -, Sayedatul Akma (2011) Effects of scribing wheel dimensions on LCD glass cutting. In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, Kuala Lumpur, Malaysia, pp. 259-265. ISBN 9789674181758

Ali, Mohammad Yeakub and Mohd. Hajar, Nurul Hajar (2011) Fabrication of Micropillar Sheet for Cell Culture Dish. In: IIUM Research, Invention and Innovation Exhibition (IRIIE) 2011, 9-10 February 2011, Cultural Activity Centre (CAC) and KAED Gallery IIUM.

Ali, Mohammad Yeakub and Mohd Fuad, Nurul Hajar (2011) Fabrication of micropillar sheet for cell culture dish. In: Malaysia Technology Expo (MTE 2011), 17-19 February 2011, KLCC.

Mohamad Badari, Siti Norbahiyah and Adesta, Erry Yulian Triblas (2011) Improvement of typical hip-joint design for gripping and fixing. In: Design for manufacture: towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 26-43. ISBN 9789674181598

Sabur, Abdus and Ali, Mohammad Yeakub (2011) Kerf in micro wire electro discharge machining. In: Design for manufacture : Towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 279-285. ISBN 9789674181598

Ali, Mohammad Yeakub and -, Wan Emira Azaty and -, Nor Suriza (2011) Micro electro discharge machining of micro pillar array: process development. In: Advanced Machining Process. IIUM Press, Kuala Lumpur, Malaysia, pp. 136-141. ISBN 9789674181628

Ali, Mohammad Yeakub (2011) Micro-manufacturing technology: the huge opportunity of thinking small. In: International Conference on Material and Manufacturing Technology, 8-11 July 2011, Xiamen, China.

Ali, Mohammad Yeakub and Mass Duki, Siti Hamizah and Mansor, Noor Adila (2011) Minimum chip thickness in machining MEMS structure using Tool Based Micromilling. In: IIUM Research, Invention and Innovation Exhibition (IRIIE) 2011, 9-10 February 2011, Cultural Activity Centre (CAC) and KAED Gallery IIUM.

Ali, Mohammad Yeakub (2011) Nanopillar Array for Cell Culture Dish. In: Seminar Nanopillar Array for Cell Culture Dish, 16 June 2011, Bangladesh. (Unpublished)

M. K. , Nor Khairusshima and Amin, A. K. M. Nurul and Ismail, Ahmad Faris (2011) Performance of uncoated WC-Co in end milling of Aluminium Silicon Carbide (AlSiC). In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, International Islamic University Malaysia, Kuala Lumpur, Malaysia, pp. 255-260. ISBN 978-967-418-175-8

Ali, Mohammad Yeakub and Adesta, Erry Yulian Triblas and Abdul Rahman, Nur Atiqah and Mohamad Aris, Erniyati (2011) Powder Mixed Micro Electro Discharge Milling of Titanium Alloy: Analysis of Surface Roughness. In: International Conference on Material and Manufacturing Technology, 8-11 July 2011, Xiamen, China. (Unpublished)

Amin, A. K. M. Nurul and -, Kok and Mahmud, Md. Asif (2011) Relative performances of preheating, cryogenic cooling and hybrid turning of stainless steel AISI 304. In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, Kuala Lumpur, Malaysia, pp. 49-56. ISBN 9789674181758

Ali, Mohammad Yeakub and N.A.R.A., Atiqah and M.A., Erniyati (2011) Silicon carbide powder mixed micro electro discharge milling of titanium alloy. International Journal of Mechanical and Materials Engineering (IJMME), 6 (3). pp. 338-342. ISSN 1823-0334

Ndaliman, Mohammed Baba and Khan, Ahsan Ali and Ali, Mohammad Yeakub (2011) Surface modification of titanium alloy through electrical discharge machining (EDM). International Journal of Mechanical and Materials Engineering, 6 (3). pp. 380-384. ISSN 1823-0334

Amin, A. K. M. Nurul and Lajis, M. A. and Karim, A.N. Mustafizul (2011) Tool wear and surface roughness aspects in heat assisted end milling of AISI D2 hardened steel. In: Advanced Machining Towards Improved Machinability of Difficult-to-Cut Materials. IIUM Press, Kuala Lumpur, Malaysia, pp. 35-42. ISBN 9789674181758

Ali, Mohammad Yeakub and Lim, B.H. (2011) Trimming of atomic force microscope probe tip by ion milling. In: Mechatronics book series: Selected papers from ICOM'01, ICOM'05 and ICOM'08. IIUM Press, Kuala Lumpur, pp. 381-385. ISBN 9789670225685

Mohamad Ali, Hasanudin Hafis and Md. Shukri, Md. Amir Hamzah and Wan Yusoff, Wan Ahmad Yusmawiza (2011) A surgical training model manufacture using fused deposition modeling. In: Design for manufacture: towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 44-49. ISBN 9789674181598

Khan, Ahsan Ali and Ali, Mohammad Yeakub and Haque, Md. Mohafizul (2010) A new approach of applying cryogenic coolant in turning AISI 304 stainless steel. International Journal of Mechanical and Materials Engineering (IJMME), 5 (2). pp. 171-174. ISSN 1823-0334

Ali, Mohammad Yeakub and Hung, Wayne N.P. and Fu, Yongqi (2010) A review of focused ion beam sputtering. International Journal of Precision Engineering and Manufacturing, 11 (1). pp. 157-170. ISSN 2005-4602 (O), 1229-8557 (P),

Ali, Mohammad Yeakub and Karim, A.N. Mustafizul and Adesta, Erry Yulian Triblas and Ismail, Ahmad Faris and Abdullah, 'Aisy Anuarin and Idris, Mohd Nazrol (2010) Comparative study of conventional and micro WEDM based on machining of meso/micro sized spur gear. International Journal of Precision Engineering and Manufacturing, 11 (5). pp. 779-784. ISSN 2005-4602 (O), 1229-8557 (P),

Afifah, Ali and Khan, Ahsan Ali and Ali, Mohammad Yeakub (2010) Effect of Process Parameters on Abrasive Contamination During Water Abrasive Jet Machining of Mild Steel. In: UNSPECIFIED.

Khan, Ahsan Ali and Ali, Mohammad Yeakub and Haque, Md. Mohafizul (2010) Effect of discharge current and electrode size on material removal rate and wear ratio in electrical discharge machining. International Journal of Mechanical Engineering, 7 (1). pp. 81-90. ISSN 1823-5514

Ali, Mohammad Yeakub and Mohd Fuad, Nurul Hajar (2010) Fabrication of Bio-MEMS Nanostructure by focused ion beam. In: International Conference on the Advancement of Materials and Nanotechnology, 29 Nov-1 Dec 2010, Prince Hotel, Kuala Lumpur.

Ali, Mohammad Yeakub and Mohd Fuad, Nurul Hajar (2010) Fabrication of Silicon Nanopillar Sheet for Cell Culture Dish. In: UNSPECIFIED.

Mohd. Fuad, Nurul Hajar and Ali, Mohammad Yeakub (2010) Investigation of Microholes Produced by Focused Ion Beam Micromachining. In: Materials Processing and Precision Engineering. Series 1 . Department of Manufacturing and Materials,Kulliyyah of Engineering, IIUM, Malaysia, pp. 92-97.

Adesta, Erry Yulian Triblas and Iskandar, Idris and Ali, Mohammad Yeakub and Maleque, Md. Abdul and Tasnim, Firdaus, eds. (2010) Materials Processing and Precision Engineering: series 1. Series 1 . Department of manufacturing and Materials,Kulliyyah of Engineering, IIUM, Malaysia.

Mehfuz, Reyad and Ali, Mohammad Yeakub (2009) Investigation of machining parameters for the multiple-response optimization of micro electrodischarge milling. The International Journal of Advanced Manufacturing Technology, 43 (3-4). pp. 264-275. ISSN 0268-3768

Ali, Mohammad Yeakub and Mehfuz, R. (2009) Investigation of finish cut of microelectrodischarge milling for nanosurface finish. Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures, 27 (3). pp. 1330-1334. ISSN 1071-1023

Mridha, Shahjahan and Ali, Mohammad Yeakub and Afzeri, Afzeri, eds. (2009) Book of abstracts: The International Conference on Advances in Materials and Processing Technologies (AMPT 2009). Kulliyyah of Engineering, International Islamic University Malaysia, Kuala Lumpur.

Khan, Ahsan Ali and Mridha, Shahjahan and Ali, Mohammad Yeakub (2009) Cryogenic grinding of mild steel and stainless steel. International Journal for manfacturing Science and Production, 10 (1). pp. 69-74. ISSN 2191-0375 (O); 0793-6648 (P)

Ali, Mohammad Yeakub (2009) Development of micro end milling process for fabricating MEMS. Research Report. International Islamic University Malaysia, Kuala Lumpur. (Unpublished)

Ali, Mohammad Yeakub and S.M., Ammar (2009) Effect of conventional EDM parameters on micromachined surface roughness and fabrication of hot embossing master and microtool. Materials and Manufacturing Processes, 24 (4). pp. 454-458. ISSN 1532-2475 (O), 1042-6914 (P)

Khan, Ahsan Ali and Mridha, Shahjahan and Ali, Mohammad Yeakub (2009) Effect of cryogenic cooling during grinding of mild steel and stainless steel. In: Proceedings of the Seminar on Research Findings 2008. IIUM Press, Kuala Lumpur, pp. 397-404. ISBN 9789833855780

Ali, Mohammad Yeakub (2009) Fabrication of microfluidic channel using micro end milling and micro electrical discharge milling. International Journal of Mechanical and Materials Engineering (IJMME), 4 (1). pp. 93-97. ISSN 1823-0334

Ali, Mohammad Yeakub and Hamad, Mohd Hosni and Karim, Ahmad Izwan (2009) Form characterization of microhole produced by microelectrical discharge drilling. Materials and Manufacturing Processes, 24 (6). pp. 683-687. ISSN 1042-6914

Mehfuz, Reyad and Ali, Mohammad Yeakub (2009) Investigation of machining parameters for the multiple response optimization of micro electrodischarge milling. International Journal of Advanced Manufacturing Technology, 43 (3). pp. 264-275. ISSN 1433-3015 (O); 0268-3768 (P)

Ali, Mohammad Yeakub and Khan, Ahsan Ali and Othman, Khairul Irman and Omar, Mohd Aliff (2009) Micro end milling of AISI 304 stainless steel and analysis of micro surface roughness. In: Proceedings of the 2009 International Conference on Mechanical and Electrical Technology (ICMET'09), 8 - 11 August 2012, Beijing.

Ali, Mohammad Yeakub and Omar, Mohd Aliff and Othman, Khairul Irman and Hung, Wayne N.P. (2009) Prediction of burr formation in fabricating MEMS components by micro end milling. In: International Conference on Materials for Advanced Technologies (ICMAT), 28 June - 03 July, Singapore.

Khan, Ahsan Ali and Ali, Mohammad Yeakub and Haque, Md. Mohafizul (2009) A study of electrode shape configuration on the performance of die sinking EDM. International Journal of Mechanical and Materials Engineering, 4 (1). pp. 19-23. ISSN 1823-0334

Khan, Ahsan Ali and Haque, Md. Mohafizul and Ali, Mohammad Yeakub (2008) Effect of size and shape of electrodes on the performance of EDM. In: 13th International Conference on Applied Mechanics and Mechanical Engineering, 27 - 29 May 2008, Cairo, Egypt.

Ali, Mohammad Yeakub (2008) Geometrical integrity of microholes produced by micro-EDM. Research Report. Research Management Center, IIUM, Kuala Lumpur. (Unpublished)

Ali, Mohammad Yeakub (2008) Micro-drilling of metallic materials for microsystems technology. Project Report. Research Management Center, IIUM, Kuala Lumpur. (Unpublished)

Khan, Ahsan Ali and Mridha, Shahjahan and Ali, Mohammad Yeakub (2008) Effect of cryogenic cooling during grinding of mild steel and stainless steel. In: International Conference on Mechanical and Manufacturing (ICME 2008), 21-23 May 2008, Johor Bahru, Malaysia.

Ali, Mohammad Yeakub and Mohammad, Ammar Sami (2008) Experimental study of conventional wire electrical discharge machining for microfabrication. Materials and Manufacturing Processes, 23 (7). pp. 641-645. ISSN 1042-6914

Ali, Mohammad Yeakub and Khan, Ahsan Ali and Mehfuz, R. and Aishah, S. and Hayati, N. and Hajar, N. (2008) Fabrication of micromold cavity for microreplication: A review. In: International Conference on Mechanical and Manufacturing Engineering (ICME 2008), 21-23 May 2008, Johor Bahru, Malaysia.

Ali, Mohammad Yeakub (2008) Focused ion beam machining of cell culture dish. In: ISE Seminar 2008, 3rd March 2008, Thailand. (Unpublished)

Ali, Mohammad Yeakub (2008) Focused ion beam micromachining of mems. In: International Symposium on Advanced Mechatronics Engineering, 29 February 2008, Changwon, S. Korea.

Ali, Mohammad Yeakub and Rosfazila, M. R. and Rosnita, E. (2008) Geometrical integrity of microholes drilled by conventional and micro electrical discharge machining. In: "Advanced Design and Manufacture to Gain a Competitive Edge: New Manufacturing Techniques and their Role in Improving Enterprise Performance", 14- 16 January 2008, Sanya, Hainan; China.

Ali, Mohammad Yeakub and Amin, A. K. M. Nurul and Mehfuz, R. and Najran, W. and Akif, M. (2008) Influence of micro end milling process parameters on surface roughness. In: International Conference on Mechanical and Manufacturing Engineering (ICME 2008), 21-23 May 2008, Johor Bahru, Malaysia.

Ali, Mohammad Yeakub and Alif, M. and Irman, K. and Hajar, N. and Hayati, N. (2008) Investigation of burr formation in micro end milling. In: International Conference on Science and Technology: Applications in Industry & Education, 12-13 December 2008, Pulau Pinang, Malaysia.

Ali, Mohammad Yeakub and Mehfuz, R. (2008) Investigation of finish cut of micro electro discharge milling for nano surface finish. In: International Conference on nanoManufacturing (nanoMan2008), 13-16 July 2008, Singapore.

Ali, Mohammad Yeakub and Amin, A. K. M. Nurul and Khan, Ahsan Ali (2008) Microengineering education in IIUM: challenges and successes. In: International Conference on MEMS and Nanotechnology, ICMN'08, 13-15 May 2008, Saloma Bistro and Theatre Restaurant, Kuala Lumpur, Malaysia.

Ali, Mohammad Yeakub and Ismail, Ahmad Faris (2008) Nanotechnology education at undergraduate level: Malaysian scenario. In: National Seminar on Science, Technology and Social Sciences (STSS), 2nd-4th June 2008, Kuantan, Pahang.

Ali, Mohammad Yeakub and Reyad, Mehfuz (2007) Design and fabrication of micro swiss-roll combustor mold by micro EDM milling. In: Kulliyyah of Engineering Research and Innovation Exhibition ( KERIE), 12-13 Dec. 2007, Culture Activity Centre (CAC), IIUM . (Unpublished)

Nuruzzaman, D. M. and Nakajima, A. and Mawatari, T. and Ali, Mohammad Yeakub (2007) Durability and tribological properties of thermally sprayed wc cermet coating under lubricated rolling-sliding contact. IIUM Engineering Journal, 8 (1). pp. 49-62. ISSN 1511-788X

Ali, Mohammad Yeakub and Loo, Yee Wei (2007) Geometrical integrity of micromold cavity sputtered by FIB using multilayer slicing approach. Microsystems Technologies, 13 (1). pp. 103-107. ISSN 0946-7076

Ali, Mohammad Yeakub and Amin, A. K. M. Nurul and Haque, Md. Mohafizul (2007) Manufacturing engineering education in IIUM. In: Regional Conference on Engineering Education 2007 (RCEE 2007), 03-05 December 2007, Johor Bahru, Malaysia.

Mehfuz, R. and Ali, Mohammad Yeakub (2007) Surface roughness analysis of beryllium-copper alloy in micro end milling. In: International Conference on Mechanical Engineering (ICME 2007), 29-31 December 2007, Dhaka, Bangladesh.

Ali, Mohammad Yeakub and N.I, Rashidah and N.A, Azima (2007) Wire electrical discharge machining for microfabrication. In: International Conference on Mechanical Engineering 2007 (ICME 2007), 29-31 December, 2007, Dhaka, Bangladesh.

Ali, Mohammad Yeakub and Lim, BengHai (2006) Characterisation of surface texture using AFM with trimmed probe tip. Surface Engineering, 22 (6). pp. 443-446. ISSN 0267-0844

Mohammad, Ammar Sami and Ali, Mohammad Yeakub (2006) Fabricating hot embossing micro tool using electrodischarge machining. In: International Conference on Manufacturing and Materials Processing 2006, 14-16 March 2006, Kuala Lumpur, Malaysia.

Ali, Mohammad Yeakub and Ong, A. S. (2006) Fabricating micromilling tool using wire electrodischarge grinding and focused ion beam sputtering. International Journal of Advanced Manufacturing Technology, 31 (5-6). pp. 501-508. ISSN 1433-3015 (O); 0268-3768 (P)

Reyad, Mehfuz and Ali, Mohammad Yeakub (2006) Micro/Meso Mechanical Manufacturing (M4): opportunities and challenges: a review. In: Regional Postgraduate Conference on Engineering and Science, 26th-27th Jul, 2006, UTM, Malaysia. (Unpublished)

Hung, W. N. P. and Agnihotri, M. M. and Ali, Mohammad Yeakub and Yuan, S. (2006) Molding of three-dimensional microcomponents. In: International Conference on Manufacturing Science and Engineering, 8-11 October 2006, Michigan, USA.

Ali, Mohammad Yeakub and Ammar, S. M. and Baayah, N. and Aishah, S. and Zaliha, S. and Hayati, N. (2006) Optimization of EDM parameters for micro/meso fabrication. In: 3rd BSME-ASME International Conference on Thermal Engineering, 20th-22nd December 2006, Dhaka, Bangladesh. (Unpublished)

Mohammad, Amar Sami and Ali, Mohammad Yeakub (2006) Polymeric micro-fluidic channel by hot embossing. In: Kulliyyah of Engineering Research and Innovation Exhibition ( KERIE), 5-6 Dec 2006, Culture Activity Centre (CAC), IIUM . (Unpublished)

Ali, Mohammad Yeakub and Loo, Y. W. (2006) Sputtering of paraboloid microstructure using fib. In: International Conference on MEMS and Nanotechnology (ICMN'06), 15-16 March 2006 , Kuala Lumpur, Malaysia.

Konneh, Mohamed and Izman, S. and Ali, Mohammad Yeakub (2006) An investigation on morphology of hard-brittle silicon surface by diamond grinding. In: International Conference on Manufacturing Science and Technology (ICOMAST 2006), 28-30 August 2006, Melaka, Malaysia.

Ali, Mohammad Yeakub and Ayob, Mohd Hafiz and Mohd Isa, Saiful Adzli (2005) Developing a prototype micro hot embossing setup. In: 5th International Mechanical Engineering Conference and 10th Annual Paper Meet, 30 September - 2 October 2005, Dhaka, Bangladesh.

Ali, Mohammad Yeakub and Reyad, Mehfuz and Khan, Ahsan Ali and Ismail, Ahmad Faris (2005) Micro Electro Discharge Milling for Microfabrication. In: Micromachining. In-Tech, Croatia, pp. 1-28. (In Press)

Ali, Mohammad Yeakub and Ong, A. S. and Konneh, Mohamed (2005) Micromilling of tungsten carbide using focused ion beam. In: International Conference on Mechanical Engineering 2005 (ICME2005), 28-30 December 2005, Dhaka, Bangladesh.

Yuan , S. and Ngoi, B. K. A. and Hung, N. P. and Ali, Mohammad Yeakub (2004) Fabrication of microcomponents by injection molding. In: International Conference on Precision Engineering (ICoPE) 2003/04, 02-05 March 2004, Singapore.

Ali, Mohammad Yeakub and Ngoi, Brian K. A. (2003) Mass-replication of micro-components. Forward. p. 6.

Yuan, Shu and Hung, NguyenPhu and Ngoi, Bryan Kok Ann and Ali, Mohammad Yeakub (2003) Development of Microreplication Process - Micromolding. Materials and Manufacturing Processes, 18 (5). pp. 731-751. ISSN 1042-6914

Ali, Mohammad Yeakub and Hung, N. P. and Ngoi, B. K. A. and Yuan, S. (2003) Sidewall surface roughness of Sputtered Silicon 1: surface modelling. Surface Engineering, 19 (2). pp. 97-103. ISSN 0267-0844

Hung, NguyenPhu and Fu, Yongqi and Ali, Mohammad Yeakub (2002) Focused ion beam machining of silicon. Journal of Materials Processing Technology, 127 (2). pp. 256-260. ISSN 0924-0136

Hung, N. P. and Yuan, S. and Lee, E. C. W. and Ali, Mohammad Yeakub (2001) Development of a micromolding process. In: International Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS 2001, 25-27 April 2001, Cannes, France.

Ali, Mohammad Yeakub and Ngoi, B. K. A. and Hung, N. P. and Yuan, S. and Lee, C.P. (2001) Hot embossing and injection molding of three-dimensional microcomponents. In: BSME-ASME International Conference on Thermal Engineering, 31 December 2001 - 02 January 2002, Dhaka, Bangladesh.

Ali, Mohammad Yeakub and Hung, N. P. and Yuan, S. (2001) Mathematical modeling of sputtering-induced surface roughness. In: International Symposium on Design, Test, Integration, and Packaging of MEMS / MOEMS 2001, 25-27 April 2001, Cannes, France.

Hung, W. N. P. and Ngothai, Y. and Yuan, S. and Lee, C. W. and Ali, Mohammad Yeakub (2001) Micromolding of three-dimensional components. In: Precision Engineering at the Beginning of a Millenium (ICPE), 18-20 July 2001, Yokohama, Japan.

Hung, NguyenPhu and Ali, Mohammad Yeakub and Fu, Yongqi and Ong, NanShing and Tay, MengLeong (2001) Surface integrity and removal rate of silicon sputtered with focused ion beam. Machining Science and Technology, 5 (2). pp. 239-254. ISSN 1091-0344

Ali, Mohammad Yeakub and Hung, N. P. and Yuan, S. (2001) Surface roughness of FIB sputtered silicon. In: Precision Engineering at the Beginning of a Millenium (ICPE), 18-20 July 2001, Yokohama, Japan.

Ali, Mohammad Yeakub and Bryan, N. K. A. and Hung, W. N. P. and Alauddin, M. and Yuan, S. (2001) Surface roughness of ion-sputtered micromold. In: International Conference on Mechanical Engineering (ICME) 2001, 26-28 December 2001, Dhaka, Bangladesh.

Ali, Mohammad Yeakub and Hung, N. P. (2001) Surface roughness of sputtered silicon. I. surface modeling. Materials and Manufacturing Processes, 16 (3). pp. 297-313. ISSN 1532-2475 (O), 1042-6914 (P)

Ali, Mohammad Yeakub and Hung, NguyenPhu (2001) Surface roughness of sputtered silicon. II. Model verification. Materials and Manufacturing Processes, 16 (3). pp. 315-329. ISSN 1042-6914

Ali, Mohammad Yeakub and Hung, Wayne N.P. (2000) Fabrication of micro cavities by micro electrical discharged machining. In: International Conference on Manufacturing (ICM) 2000, 24-26 February 2000, Dhaka, Bangladesh.

Ali, Mohammad Yeakub and Hung, Wayne N.P. (2000) Fabrication of three dimensional micro-components – A review. In: 6th Annual Paper Meet & International Conference on Mechanical Engineering in the 21st Century , 17-19 February 2000, Dhaka, Bangladesh.

Ali, Mohammad Yeakub and Bohez, E. L. J. (2000) Knowledge-based approach for stretch blow molding. In: International Conference on Precision Engineering (ICoPE) 2000, 21-23 March 2000, Singapore.

Hung, N. P. and Ali, Mohammad Yeakub and Yuan, S. (2000) Producing LIGA-competitive microcomponents. In: International Conference on Micromachining and Microfabrication Process Technology VI 2000, 22-25 October 2000, California, USA.

Ali, Mohammad Yeakub and Hung, N. P. and Yuan, S. (2000) Simulation of micro-injection molding. In: International Conference on Precision Engineering (ICoPE) 2000, 21-23 March 2000, Singapore.