Items where Author is "Al Hazza, Muataz Hazza Faizi"

Al Hazza, Muataz Hazza Faizi and Zahari, Syahir and Bourini, Islam and Ismail, Md Yusof and Ali, Mohammad Yeakub and Adesta, Erry Y. T. (2023) Lean manufacturing and six sigma principles implementation in the industry: case study. In: 5th International Conference on Advances in Manufacturing and Materials Engineering (ICAMME2022), 9th - 10th August 2022, Online Conference.

Al Hazza, Muataz Hazza Faizi and Abdulraman H.A., Saadah (2019) Flank wear modeling in high speed hard end milling using integrated approach of Monte Carlo simulation method and Taguchi design. In: "2019 International Conference on Electrical and Computing Technologies and Applications, ICECTA 2019", 19 - 21 Nov 2019, Ras Al Khaimah, United Arab Emirates.

Brza, Mohamad A. and Aziz, Shujahadeen and Anuar, Hazleen and Al Hazza, Muataz Hazza Faizi (2019) From green remediation to polymer hybrid fabrication with improved optical band gaps. International Journal of Molecular Sciences, 20 (16). pp. 1-23. ISSN 1661-6596 E-ISSN 1422-0067

Al Hazza, Muataz Hazza Faizi and Ibrahim, Nur Asmawiyah and Adesta, Erry Yulian Triblas and Endut, Nor Amalina and Yeakub Ali, Mohammad (2019) Flexural behavior of open-cell aluminum foam sandwich under three-point bending. International Journal of Recent Technology and Engineering (IJRTE), 7 (6S). pp. 134-137. E-ISSN 2277-3878

Al Hazza, Muataz Hazza Faizi and Endut, Nor Amalina and Adesta, Erry Yulian Triblas and Ibrahim, Nur Asmawiyah (2019) Numerical analysis of aluminum foam sandwich subjected to compression loading. International Journal of Recent Technology and Engineering (IJRTE), 7 (6S). pp. 138-142. E-ISSN 2277-3878

Al Hazza, Muataz Hazza Faizi and Endut, Amalina and Adesta, Erry Yulian Triblas and Ibrahim, Nur A B and Ali, Mohammad Yeakub (2018) Statistical analysis of energy absorption in aluminum foam sandwich under impact testing using the Taguchi design. In: Reference module in materials science and materials engineering. Elsevier, pp. 1-6.

Siddique, Istiaq Jamil and Bahar, R. and Ibrahim, Shaliza and Al Hazza, Muataz Hazza Faizi (2018) Performance of combined PTFE hydrophilic and hydrophobic membrane during laundry/detergent wastewater treatment by air gap membrane distillation (AGMD): an experimental study. Desalination and Water Treatment, 127. pp. 255-261. ISSN 1944-3994 E-ISSN 1944-3986

Alrashidi, Abdullah E. M. F. and Al Hazza, Muataz Hazza Faizi and Khan, Ahsan Ali (2018) The scenario of supply chain management in Kuwait food industry. International Journal of Engineering Materials and Manufacture, 3 (3). pp. 162-170. ISSN 0128-1852

Abdul Rahman, Nur Salihah and Al Hazza, Muataz Hazza Faizi and Kays, Emrul (2018) Minimizing makespan of multimachine production system in flow shop environment by means of mixed integer programming model. International Journal of Mechanical Engineering and Technology (IJMET), 9 (8). pp. 1101-1110. ISSN 0976-6340 E-ISSN 0976-6359

Al Hazza, Muataz Hazza Faizi and Zainal, Nur Izzati Zainal and Rodzi, Mohd Zuhaili Mohd (2018) Development of FRID based 2d localization simulation for autonomous guided vehicle tracking in indoor environment. International Journal of Mechanical Engineering and Technology (IJMET), 9 (8). pp. 496-507. ISSN 0976-6340 E-ISSN 0976-6359

Bourini, Islam Faisal and Al Hazza, Muataz Hazza Faizi and Taha, Assem Hatem (2018) Investigation of effect of machine layout on productivity and utilization level: what if simulation approach. International Journal of Engineering Materials and Manufacture, 3 (1). pp. 32-40.

Abdullah Sidek, 'Atiah and Suffian, S A and Al Hazza, Muataz Hazza Faizi and H. M., Yusof (2018) Determining system boundaries on commercial broiler chicken production system using ISO 14040/14044 guideline: a case study. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8th-9th August 2017, Kuala Lumpur.

Al Hazza, Muataz Hazza Faizi and Elbishari, E M Y and Ismail, Md Yusof and Adesta, Erry Yulian Triblas and Abdul Rahman, Nur Salihah (2018) Productivity improvement using discrete events simulation. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017), 8th–9th August 2017, Kuala Lumpur, Malaysia.

Shahlan, M. Z. and Sidek, Ayu Aszliana and Suffian, S A and Al Hazza, Muataz Hazza Faizi and Che Daud, Mohd Radzi (2018) An examination on the influence of small and medium enterprise (SME) stakeholder on green supply chain management practices. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8 - 9 August 2017, Kuala Lumpur, Malaysia.

Al Hazza, Muataz Hazza Faizi and Adesta, Erry Yulian Triblas and Abdullah Sidek, 'Atiah and Endut, N A (2018) A study of tensile test on open-cell aluminum foam sandwich. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017), 8th–9th August 2017, Kuala Lumpur, Malaysia.

Endut, N A and Al Hazza, Muataz Hazza Faizi and Abdullah Sidek, 'Atiah and Adesta, Erry Yulian Triblas and Ibrahim, N A (2018) Compressive behaviour and energy absorption of aluminium foam sandwich. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017), 8th–9th August 2017, Kuala Lumpur, Malaysia.

Suffian, S. A. and Abdullah Sidek, 'Atiah and Md. Yusof, Hazlina and Al Hazza, Muataz Hazza Faizi (2018) Inventory data on commercial broiler chicken production system using life cycle assessment approach: A case study. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8-9 August 2017, International Islamic University Malaysia (IIUM), Gombak Campus, Kuala Lumpur.

Khan, Ahsan Ali and Mohiuddin, A. K. M. and Al Hazza, Muataz Hazza Faizi and Norhamzan, Norainnatul Husna (2018) Enhancement of machining performance during electrical discharge machining of stainless steel with carbon nanotube powder added dielectric fluid. International Journal of Applied Engineering Research, 13 (9). pp. 7076-7080. ISSN 0973-4562 E-ISSN 0973-9769

Al Hazza, Muataz Hazza Faizi and Ibrahim, Nur Asmawiyah and Adesta, Erry Yulian Triblas and Endut, Amalina (2018) Flexural behavior of open-cell aluminum foam sandwich under three-point bending. In: 4th International Conference on Mechanical, Automotive, and Aerospace Engineering 2018 (ICMAAE’18), 19th-20th September 2018, Kuala Lumpur. (Unpublished)

Al Hazza, Muataz Hazza Faizi and Endut, Nor Amalina and Adesta, Erry Yulian Triblas and Ibrahim, Nur Asmawiyah (2018) Numerical analysis of aluminum foam sandwich subjected to compression loading. In: 4th International Conference on Mechanical, Automotive, and Aerospace Engineering 2018 (ICMAAE’18), 19th-20th September 2018, Kuala Lumpur. (Unpublished)

Al Hazza, Muataz Hazza Faizi and Adesta, Erry Yulian Triblas (2017) Simulation of real time tracking system using RFID technology to enhance quality activities in flexible manufacturing system. In: 5th International Symposium on Computational and Business Intelligence (ISCBI 2017), 11th-14th Aug. 2017, Dubai, UAE..

Mahmood, Mahmood Hameed and -, Suryanto and Al Hazza, Muataz Hazza Faizi (2017) The effects of water flow rate on copper corrosion. Key Engineering Materials, 748. pp. 235-239. ISSN 1662-9795

Ibrahim, Nur Asmawiyah and Al Hazza, Muataz Hazza Faizi and Adesta, Erry Yulian Triblas and Endut, Nor Amalina and Asman, Asyfiq Hanif (2017) Experimental study of stress-strain behaviour of open-cell aluminium foam sandwich panel for automotive structural part. International Journal of Engineering Materials and ManufactureInternational Journal of Engineering Materials and Manufacture, 2 (2). pp. 25-30. E-ISSN 0128-1852

Khan, Ahsan Ali and Mohamad Royani, Nurul Nasuha and Al Hazza, Muataz Hazza Faizi and Che Daud, Mohd Radzi and Mohiuddin, A. K. M. (2017) Improvement of surface quality using silicon carbide powder added dielectric fluid during EDM. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25th-27th July 2016, Kuala Lumpur, Malaysia.

Khan, Ahsan Ali and Abu Bakar, Marina and Al Hazza, Muataz Hazza Faizi and Che Daud, Mohd Radzi and Mohiuddin, A. K. M. (2017) Improving machining performance using alumina powder-added dielectric during electrical discharge machining (EDM). In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25th-27th July 2016, Kuala Lumpur, Malaysia.

Al Hazza, Muataz Hazza Faizi and Ibrahim, Nur Asmawiyah and Adesta, Erry Yulian Triblas and Khan, Ahsan Ali and Abdullah Sidek, 'Atiah (2017) Surface roughness optimization using Taguchi method of high speed end milling for hardened steel D2. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25th-27th July 2016, Kuala Lumpur, Malaysia.

Al Hazza, Muataz Hazza Faizi and Ibrahim, Nur Asmawiyah and Adesta, Erry Yulian Triblas and Khan, Ahsan Ali and Abdullah Sidek, 'Atiah (2017) Flank wear analysing of high speed end milling for hardened steel D2 using Taguchi method. IOP Conference Series: Materials Science and Engineering, 184. pp. 1-5. ISSN 1757-899X

Mohammad, Yeakub Ali and Farhana, Sulaiman and Banu, Asfana and Mohamed, Abd. Rahman and Al Hazza, Muataz Hazza Faizi (2017) Investigation of accuracy in microdrilling with minimum quantity lubrication. In: 7th International Conference on Manufacturing Science and Technology (ICMST 2016), 16th-18th July 2016, Sarawak.

Al Hazza, Muataz Hazza Faizi and Abu Bakar, Any Nabila and Adesta, Erry Yulian Triblas and Taha, Assem Hatem (2017) Empirical study on AGV guiding in indoor manufacturing system using color sensor. In: 5th International Symposium on Computational and Business Intelligence (ISCBI 2017), 11th-14th Aug. 2017, Dubai, UAE..

Khan, Ahsan Ali and Al Hazza, Muataz Hazza Faizi and Mohiuddin, A. K. M. and Ali, Mohammad Yeakub (2017) Influence of the angle of cut of workpiece on taper and corner roundness during Wire Electrical Discharge Machining (WEDM). International Review of Mechanical Engineering (IREME), 11 (3). pp. 208-212. ISSN 1970-8734 E-ISSN 2532-5655

Taha, Assem Hatem and Al Hazza, Muataz Hazza Faizi and Adesta, Erry Yulian Triblas (2017) Modelling and analysing deadlock in flexible manufacturing system using timed petri net. International Journal of Engineering Materials and Manufacture, 2 (1). pp. 11-15. ISSN 0128-1852

Elbishari, Elhassan M Y and Al Hazza, Muataz Hazza Faizi and Adesta, Erry Yulian Triblas and Abdul Rahman, Nur Salihah (2017) An integrated approach for facilities planning by ELECTRE method. In: International Conference on Advances in Manufacturing and Materials Engineering 2017 (ICAMME17), 8th-9th August 2017, Kuala Lumpur, Malaysia.

Al Hazza, Muataz Hazza Faizi and Khan, Ahsan Ali and Yeakub Ali, Mohammad and Hasim, Siti Fatihah and Che Daud, Mohd Radzi (2017) A study on capabilities of different electrode materials during electrical discharge machining (EDM). IIUM Engineering Journal, 18 (2). pp. 189-195. ISSN 1511-788X E-ISSN 2289-7860

Al Hazza, Muataz Hazza Faizi and Bourini, Islam Faisal (2016) Statistical analysis of tooling cost in high speed end milling for hardened steel. Electronic Journal of Applied Statistical Analysis, 9 (3). pp. 530-539. ISSN 2070-5948

Khan, Ahsan Ali and Al Hazza, Muataz Hazza Faizi and Che Daud, Mohd Radzi and Ali , Mohammad Yeakub and Jamingan, Hazira (2016) Analyzing and modeling the influence of workpiece thickness on geometry of slot machining wire EDMs. In: 2015 4th International Conference on Advanced Computer Science Applications and Technologies (ACSAT 2015), 8th-10th Dec. 2015, Kuala Lumpur.

Al Hazza, Muataz Hazza Faizi and Khan, Ahsan Ali and Ali , Mohammad Yeakub (2016) Exploration of EDM assisted CNT in micro machining using statistical approach. In: 2015 4th International Conference on Advanced Computer Science Applications and Technologies (ACSAT 2015), 8th-10th Dec. 2015, Kuala Lumpur.

Khan, Ahsan Ali and Al Hazza, Muataz Hazza Faizi and Adesta, Erry Yulian Triblas and Mohd. Fauzey, Nur Fadhilah (2016) Modeling the effect of CNT concentration in dielectric fluid on EDM performance using neural network. In: 2015 4th International Conference on Advanced Computer Science Applications and Technologies (ACSAT 2015), 8th-10th Dec. 2015, Kuala Lumpur.

Al Hazza, Muataz Hazza Faizi and Taha, Assem Hatem and Adesta, Erry Yulian Triblas and Albakri, Adilah (2016) Modelling and analysing deadlock in flexible manufacturing system using untimed petri net. In: 2015 4th International Conference on Advanced Computer Science Applications and Technologies (ACSAT 2015), 8th-10th Dec. 2015, Kuala Lumpur.

Al Hazza, Muataz Hazza Faizi and Mohmad Bakhari, Nur Amirah Najwa (2016) Optimization of cutting parameters to minimize tooling cost in high speed turning of SS304 using coated carbide tool using genetic algorithm method. International Journal of Engineering Materials and Manufacture, 1 (1). pp. 11-15. ISSN 0128-1852

Khan, Ahsan Ali and Al Hazza, Muataz Hazza Faizi and Che Daud, Mohd Radzi and Mohamad Kamal, Nor Shahirah (2016) Optimization of surface quality of mild steel machined by wire EDM using simulated annealing algorithm. In: 2015 4th International Conference on Advanced Computer Science Applications and Technologies (ACSAT 2015), 8th-10th Dec. 2015, Kuala Lumpur.

Al Hazza, Muataz Hazza Faizi and Any Nabila, Bt Abu Bakar and Taha, Assem Hatem and Adesta, Erry Yulian Triblas (2016) Real time handling system to enhance the productivity based on the layout improvement. International Review on Modelling and Simulations (I.RE.MO.S.), 9 (6). pp. 459-463. ISSN 1974-9821

Al Hazza, Muataz Hazza Faizi and Adesta, Erry Yulian Triblas and Seder, Amin M. F. (2016) Using soft computing methods as an effective tool in predicting surface roughness. In: 2015 4th International Conference on Advanced Computer Science Applications and Technologies (ACSAT 2015), 8th-10th Dec. 2015, Kuala Lumpur.

Al Hazza, Muataz Hazza Faizi and Adesta, Erry Yulian Triblas (2015) Modelling and analysing the cutting forces in high speed hard end milling using neural network. ARPN Journal of Engineering and Applied Sciences, 10 (22). 17270 -17275. ISSN 1819-6608

Shaffiar, Norhashimah and Hasnan, M.A. and Anuar, Hazleen and Al Hazza, Muataz Hazza Faizi (2015) Finite element analysis of HDPE/EPR-CNT nanocomposite under tensile loading. Advanced Materials Research, 1115. pp. 410-413. ISSN 1022-6680

Al Hazza, Muataz Hazza Faizi and Mohammed, Baba Ndaliman and Mohammad, Yeakub Ali and Khan, Ahsan Ali (2015) Analyzing the influence of electrical parameters on EDM process of Ti6Al4V alloy using Adaptive Neuro-fuzzy Inference System (ANFIS). International Review of Mechanical Engineering, 9 (3). pp. 237-241. ISSN 1970-8734

Iqbal, Mohammad and Ariff, Tasnim Firdaus and Mat Roseh, Mohd Shahrul Fahmi and Al Hazza, Muataz Hazza Faizi and Hilmy, Irfan and -, Suryanto (2015) Effect of microwave sintering treatment to the flank wear of titanium carbide tools in milling operations. Advanced Materials Research, 1115. pp. 59-63. ISSN 1022-6680

Al Hazza, Muataz Hazza Faizi and Adesta, Erry Yulian Triblas and Hassan, Muhammad Hasibul and Shaffiar, Norhashimah (2015) Energy cost optimization in high speed hard turning using simulated annealing algorithm. Advanced Materials Research, 1115. pp. 104-108. ISSN 1022-6680

Konneh, Mohamed and Al Hazza, Muataz Hazza Faizi and Sidek, Atiah Abdullah (2015) Evaluating delamination at entry of drilled carbon fiber reinforced polymer (CFRP) composite with diamond coated ball nose drills. Advanced Materials Research, 1115. pp. 64-69. ISSN 1022-6680

Al Hazza, Muataz Hazza Faizi and Khan, Ahsan Ali and Ali, Mohammad Yeakub (2015) Exploration of EDM assisted CNT in micro machining using statistical approach. In: 4th International Conference on Advanced Computer Science Applications and Technologies, 8-10 December 2015, Kuala Lumpur, Malaysia.

Al Hazza, Muataz Hazza Faizi and Adesta, Erry Yulian Triblas and Al Fadel, Mohammad (2015) Modeling a conceptual framework for owner- contractor relationship and time–cost trade-off using fuzzy logic technique. In: 3rd International Conference on Advanced Computer Science Applications and Technologies – ACSAT2014, 29-30 Dec 2014, Amman- Jordan.

Al Hazza, Muataz Hazza Faizi and Adesta, Erry Yulian Triblas and Shaffiar, Norhashimah and Seder, Amin M. F. and Riza, Muhammad (2015) Multi objective optimisation for high speed end milling using simulated annealing algorithm. Advanced Materials Research, 1115. pp. 113-116. ISSN 1022-6680

Al Hazza, Muataz Hazza Faizi and Seder, Amin M. F. and Adesta, Erry Yulian Triblas and Taufik, Muhammad and Idris, Abdul Hadi (2015) Surface roughness prediction in high speed end milling using adaptive neuro-fuzzy inference system. Advanced Materials Research, 1115. pp. 122-125. ISSN 1022-6680

Al Hazza, Muataz Hazza Faizi and Mohamed, Konneh and Iqbal, Mohammad and Taha, Assem Hatem and Muhammad, Hasibul Hasan (2015) Using the desirability function as an effective tool in target costing model. Advanced Materials Research, 1115. pp. 126-129. ISSN 1022-6680

Al Hazza, Muataz Hazza Faizi and Hassan, Muhammad Hasibul (2014) ANN modeling of nickel base super alloys for time dependent deformation. Journal of Automation and Control Engineering , 2 (4). pp. 353-356. ISSN 2301-3702

Al Hazza, Muataz Hazza Faizi and M. Al Amami , Abduraouf and Taha, Assem Hatem and Mohd Nadhir, Mohd Hafiq (2014) Decision Based Fuzzy Rules for RFID Implementation in Supply Chain Management. International Review on Modelling and Simulations (I.RE.MO.S.), 7 (5). pp. 871-877. ISSN 1974-9821

Seder, Amin M. F. and Al Hazza, Muataz Hazza Faizi (2014) Review on the theory of attractive quality kano model. Journal of Advanced Science and Engineering Research, 4 (2). pp. 88-102. ISSN 2231-8844

Al Hazza, Muataz Hazza Faizi and Adesta, Erry Yulian Triblas and Hassan, Muhammad Hasibul and Shaffiar, Norhashimah (2014) Surface roughness modeling in high speed hard turning using regression analysis. International Review of Mechanical Engineering, 8 (2). pp. 431-436. ISSN 1970-8734

Hassan, Muhammad Hasibul and Al Hazza, Muataz Hazza Faizi (2014) Tensile parameters evaluation of two solid solution super alloys by ANN modeling. International Review of Mechanical Engineering, 8 (2). pp. 338-343. ISSN 1970-8734

Iqbal, Mohammad and Ariff, Tasnim Firdaus and Fahmi, Shahrul and Al Hazza, Muataz Hazza Faizi and Hilmy, Irfan and Suryanto, - (2014) Effect of microwave sintering treatment to the flank wear of titanium carbide tools in milling operations. In: IIUM Engineering Congress : 3rd International Conference on Mathematical Application in Engineering 2014, 23rd - 25th September 2014, Kuala Lumpur.

Emrul Kays, H. M. and Karim, A. N. Mustafizul and Abdesselam, M. and Al Hazza, Muataz Hazza Faizi and Sarker, M. Ruhul Amin (2014) Formulation of integer programming model for balancing and scheduling of production line having shared resources. In: International Conference on Industrial Engineering and Operations Management, 7th-9th Jan. 2014, Bali, Indonesia.

Al Hazza, Muataz Hazza Faizi and Mohammed , Baba Ndaliman and muhammad, Hasibul hasan and Mohammad , Yeakub Ali and Khan, Ahsan Ali (2013) Modeling the electrical parameters in EDM process of Ti6Al4V alloy using Neural Network method. International Review of Mechanical Engineering, 7 (7). pp. 1464-1470. ISSN 1970-8734

Al Hazza, Muataz Hazza Faizi and Hazza, Zubaidah Muataz (2013) Design a tacit knowledge sharing system. International Journal on Islamic Applications in Computer Science And Technology, 1 (2). pp. 58-66. ISSN 2289-4012

Al Hazza, Muataz Hazza Faizi and Adesta, Erry Yulian Triblas (2013) The economic impact of using negative rake angle in high speed hard turning. Journal of Advanced Science and Engineering Research, 3 (3). pp. 309-317. ISSN 2231-8844

Al Hazza, Muataz Hazza Faizi and Adesta, Erry Yulian Triblas and Hassan, Muhammad Hasibul (2013) Tool life modeling in high speed turning of AISI 4340 hardened steel with mixed ceramic tools by using face central cubic design. International Review on Modelling and Simulations, 6 (4). pp. 1334-1338. ISSN 1974-983X (O), 1974-9821 (P)

Al Hazza, Muataz Hazza Faizi and Adesta, Erry Yulian Triblas and ., Muhammad Reza (2013) Flank wears simulation by using back propagation neural network when cutting hardened H-13 steel in CNC End Milling. In: 5th International Conference on Mechatronics (ICOM'13), 2 – 4 July 2013, Kuala Lumpur, Malaysia. (Unpublished)

Al Hazza, Muataz Hazza Faizi and Adesta, Erry Yulian Triblas (2013) Surface roughness modeling for CNC end milling using artificial neural network. In: 5th International Conference on Mechatronics (ICOM'13), 2 – 4 July 2013, Kuala Lumpur, Malaysia. (Unpublished)

Al Hazza, Muataz Hazza Faizi and Md Yusof, Nabilah and -, Nur Amirah Najwa and -, Mohd Eikhwan and -, Mohamad Khazairul and Taha, Assem Hatem (2013) Experimental study of flank wear in high speed turning of stainless steel AISI 304. Journal of Advanced Science and Engineering Research, 3 (2). pp. 96-103. ISSN 2231-8844

Al Hazza, Muataz Hazza Faizi and Adesta, Erry Yulian Triblas (2013) Experimental Investigation of the Effect of Feed Rate and Negative Tool Rake Angle in High Speed Hard Turning. Journal of Advanced Science and Engineering Research, 3 (1). pp. 62-69. ISSN 2231-8844

Al Hazza, Muataz Hazza Faizi and Ndaliman, Mohammed Baba and Ali, Mohammad Yeakub and Khan, Ahsan Ali (2013) Simulating the electrical and thermal conductivity in EDM die sinking of Cu-TaC compact electrodes using neural network. In: International Conference on Advanced Computer Science Applications and Technologies 2013, 22-24 December 2013, Kuching, Sarawak.

Al Hazza, Muataz Hazza Faizi and Adesta, Erry Yulian Triblas and Hasan, Muhammed H (2013) Simulation of tool life for ceramic with negative rake angle using neural network. In: International Conference on Advanced Computer Science Applications and Technologies 2013, 22-24 December 2013, Kuching, Sarawak.

Ndaliman, Mohammed Baba and Al Hazza, Muataz Hazza Faizi and Khan, Ahsan Ali and Yeakub Ali, Mohammad (2012) Development of a new model for predicting EDM properties of Cu-TaC compact electrodes based on artificial neural network method. Australian Journal of Basic and Applied Sciences, 6 (13). pp. 192-199. ISSN 1991-8178

Al Hazza, Muataz Hazza Faizi and Adesta, Erry Yulian Triblas and Riza, Muhammad and Suprianto, Mohamad Yuhan (2012) Power Consumption Optimization in CNC Turning Process Using Multi Objective Genetic Algorithm. Advanced Materials Research, 576. pp. 95-98. ISSN 1022-6680

Adesta, Erry Yulian Triblas and Al Hazza, Muataz Hazza Faizi and Suprianto, Mohamad Yuhan and Riza, Muhammad (2012) Predicting surface roughness with respect to process parameters using Regression Analysis Models in end milling. Advanced Materials Research, 576. pp. 99-102. ISSN 1022-6680

Al Hazza, Muataz Hazza Faizi and Adesta, Erry Yulian Triblas and Suprianto, M.Y and Riza, Muhammad (2012) Prediction of cutting temperatures by using back propagation neural network modeling when cutting hardened H-13 steel in CNC end milling. Advanced Materials Research, 576. pp. 91-94. ISSN 1022-6680

Al Hazza, Muataz Hazza Faizi and Adesta, Erry Yulian Triblas and Riza, Muhammad and Mohammad Yuhan, Suprianto (2012) Surface roughness optimization in end milling using the multi objective genetic algorithm approach. Advanced Materials Research, 576. pp. 103-106. ISSN 1022-6680

Al Hazza, Muataz Hazza Faizi and Adesta, Erry Yulian Triblas and Riza, Muhammad and M.Y., Superianto (2012) prediction of cutting temperatures by using back propagation neural network modeling when cutting hardened h-13 steel in CNC end milling. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2012), 3-5 July 2012, Kuala Lumpur, Malaysia. (Unpublished)

Al Hazza, Muataz Hazza Faizi and Adesta, Erry Yulian Triblas (2011) Flank Wear Modeling in High Speed Hard Turning by using artificial Neural Network and Regression Analysis. Advanced Materials Research , 264-5. pp. 1097-1101. ISSN 1022-6680

Adesta, Erry Yulian Triblas and Al Hazza, Muataz Hazza Faizi (2011) Machining Time Simulation in High Speed Hard Turning. Advanced Materials Research , 264-5. pp. 1102-1106. ISSN 1022-6680

Al Hazza, Muataz Hazza Faizi and Adesta, Erry Yulian Triblas (2011) New approach in cost structuring of high speed hard turning. Advanced Materials Research, 264-26. pp. 1003-1008. ISSN 1662-8985

Adesta, Erry Yulian Triblas and Al Hazza, Muataz Hazza Faizi (2011) Tool life in high speed turning with negative rake angle. Advanced Materials Research, 264. pp. 1009-1014. ISSN 1662-8985

Al Hazza, Muataz Hazza Faizi and Adesta, Erry Yulian Triblas (2011) Development of empirical models for surface roughness during high speed turning for hard materials using Box-Behnken design. In: High Speed Cutting: An Approach towards Improved Machining Performance. IIUM Press, Kuala Lumpur, pp. 31-38. ISBN 9789674180232

Al Hazza, Muataz Hazza Faizi and Adesta, Erry Yulian Triblas (2011) Development of new model for cutting force in high speed hard turning. In: High Speed Cutting: An Approach towards Improved Machining Performance. IIUM Press, Kuala Lumpur, pp. 145-152. ISBN 9789674180232

Mohd Ali , Afifah and Adesta, Erry Yulian Triblas and Agusman, Delvis and Mohamad Badari, Siti Norbahiyah and Al Hazza, Muataz Hazza Faizi (2011) Development of surface roughness prediction model for high speed end milling of hardened tool steel. Asian Journal of Scientific Research, 4 (3). pp. 255-263. ISSN 1992-1454

Al Hazza, Muataz Hazza Faizi and Adesta, Erry Yulian Triblas (2011) Development of tooling cost model in high speed hard turning. In: High Speed Cutting: An Approach towards Improved Machining Performance. IIUM Press, Kuala Lumpur, pp. 125-144. ISBN 9789674180232

Al Hazza, Muataz Hazza Faizi and Adesta, Erry Yulian Triblas and Mohd Ali, Afifah and Agusman, Delvis and Suprianto, Mohamad Yuhan (2011) Energy cost modeling for high speed hard turning. Journal of Applied Sciences, 11 (14). pp. 2578-2584. ISSN 1812-5662 (O), 1812-5654 (P)

Al Hazza, Muataz Hazza Faizi and Adesta, Erry Yulian Triblas (2011) Experimental investigations in high-speed hard turning of AISI 4340 steel using mixed ceramic. In: High Speed Cutting: An Approach towards Improved Machining Performance. IIUM Press, International Islamic University Malaysia, pp. 93-100. ISBN 9789674180232

Adesta, Erry Yulian Triblas and Al Hazza, Muataz Hazza Faizi (2011) New tool life models in turning hardened steel AISI 4340 under high cutting speed. In: High Speed Cutting - An Approach towards Improved Machining Performance. IIUM Press, Kuala Lumpur, pp. 3-16. ISBN 978-967-418-023-2

Adesta, Erry Yulian Triblas and Al Hazza, Muataz Hazza Faizi and Riza, Muhammad and Agusman, Delvis and Rosehan, Rosehan (2010) Tool life estimation model based on simulated flank wear during high speed hard turning. European Journal of Scientific Research, 39 (2). pp. 265-278. ISSN 1450-202X E-ISSN 1450-216X

Adesta, Erry Yulian Triblas and Al Hazza, Muataz Hazza Faizi (2009) Tool life in high speed turning with negative rake angle. In: International Conference on Advances in Materials & Processing Technology (AMPT 2009), 26-29 Oct., 2009, Kuala Lumpur. (Unpublished)

Al Hazza, Muataz Hazza Faizi and Adesta, Erry Yulian Triblas (2009) Flank wear modeling in high speed turning. In: International Conference on Advances in Materials & Processing Technology (AMPT 2009), 26-29 Oct., 2009, Kuala Lumpur.

Al Hazza, Muataz Hazza Faizi and Adesta, Erry Yulian Triblas (2009) Machining time stimulating in high speed hard tuning. In: International Conference on Advances in Materials & Processing Technology (AMPT 2009), 26-29 Oct., 2009, Kuala Lumpur. (Unpublished)

N,M, Mubarak and Yusof, Faridah and Al-Khatib, Ma'an Fahmi Rashid and Al Hazza, Muataz Hazza Faizi and I.Y, Qudsieh and Al-Saadi, Mohammed A. and Mohamed, Khalid (2009) Synthesis of carbon nanotubes and its potential application in protein purification by using skim latex serum. In: American Institute of Physics Conference Proceeding, 28 September - 2 October 2009, Sochi, Russia.

Adesta, Erry Yulian Triblas and Riza, Muhammad and Al Hazza, Muataz Hazza Faizi and Agusman, Delvis and Yahuza, Rosehan (2009) Tool wear and surface finish investigation in high speed turning using cermet insert by applying negative rake angles. European Journal of Scientific Research, 38 (2). pp. 180-188. ISSN 1450-216X E-ISSN 1450-202X

Al Hazza, Muataz Hazza Faizi and Adesta, Erry Yulian Triblas (2009) The development of cost structuring of high speed hard turning. In: Advances in Materials and Processing Technologies (AMPT 2009), 26-29 October 2009, Kuala Lumpur. (Unpublished)

Adesta, Erry Yulian Triblas and Riza, Muhammad and Al Hazza, Muataz Hazza Faizi and ., Rosehan (2008) The Development of Cost Structure for High Speed Hard Turning. International Journal of Science Engineering and Technology, 1 (2). pp. 47-58. ISSN 1985-3785