IIUM Repository

Items where Author is "Ahmed, Syed Faiz"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Item Type | No Grouping
Number of items: 16.

Article

Ahmed, Syed Faiz and Raza, Yarooq and T. Hussian, Abadal Salam and Joyo, M. Kamran and Shah, Asadullah (2019) Sliding mode control for 2 degrees of freedom upper limb rehabilitation robotics system under uncertainties. Intentional journal of Engineering and Advanced Technology (IJEAT), 9 (2). pp. 3268-3274. ISSN 2249-8958

Raza, Ali and Chandio, Shah Murad and Ali, Najma Imtaiz and Solangi, Zulfiqar and Shah, Asadullah and Ahmed, Syed Faiz (2018) Analysis determinants of social media acceptance in higher educational institution of Pakistan. International Journal of Engineering and Technology, 7 (2.5 (Special Issue 5)). pp. 32-36. ISSN 2227-524X

Ahmed, Syed Faiz and Joyo, Muhammad Kamran and Ali, Athar and Mohd Ali, Abdul Malik and Abdul Kadir, Kushsairy and Naqvi, Yarooq R. and Abu Bakar, Badri and Shah, Asadullah (2018) Robotic exoskeleton control for lower limb rehabilitation of knee joint. International Journal of Engineering & Technology (UAE), 7 (2.34 (Special issue 34)). pp. 56-59. ISSN 2227-524X

Altaf, Sohaib and Shah, Asadullah and Imtiaz, Najma and Shah, Abdul Salaam and Ahmed, Syed Faiz (2018) Unstructured source artifacts ontology for requirement validation in GDSD. International Journal of Engineering and Technology, 7 (2.5 (Special Issue 5)). pp. 44-52. ISSN 2227-524X

Altaf, Sohaib and Shah, Asadullah and Imtiaz, Najma and Shah, Abdul Salaam and Ahmed, Syed Faiz (2018) Visualization representation benefits of pre-requirement specification tractability. International Journal of Engineering & Technology, 7 (2.5 (Special Issue 5)). pp. 44-52. ISSN 2227-524X

Altaf, Sohaib and Shah, Asadullah and Imtiaz Ali, Najma and Shah, Abdul Salam and Ahmed, Syed Faiz (2018) Visualization representing benefits of pre-requirement specification traceability. International Journal of Engineering and Technology(UAE), 7 (2). pp. 44-52. ISSN 2227-524X

Ahmed Khatri, Naveed and Shaikh, Humaiz and Ahmed Mahir, Zulfikar and Shah, Asadullah and Ahmed, Syed Faiz (2018) A review on optimization of vehicle frontal crashworthiness for passenger safety. International Journal of Engineering & Technology (UAE), 7 (2.34 (Special issue 34)). ISSN 2227-524X

Proceeding Paper

Joyo, M. Kamran and Raza, Yarooq and Kadir, Kushsairy and Naidu, Kanendra and Ahmed, Syed Faiz and Khan, Sheroz (2020) Firefly optimised PID control for upper extremity rehabilitation robot. In: 2019 IEEE 6th International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA 2019), 27- 29 Aug 2019, Kuala Lumpur, Malaysia.

Shaikh, Faraz Ahmed and Khan, Sheroz and Alam, A. H. M. Zahirul and Ahmed, Syed Faiz and Shahid, Zeeshan and Khan, Talha Ahmed (2019) High-gain rectangular-fins shaped balanced antipodal vivaldi antenna array extended by dielectric for wide-band imaging application. In: 2019 IEEE International Conference on Innovative Research and Development (ICIRD), 28th-30th June 2019, Jakarta, Indonesia.

Khan, Talha Ahmed and Mazliham, MS. and Alam, Muhammad and Shaikh, Faraz Ahmed and Abdul Kadir, Kushsairy and Ahmed, Syed Faiz and Khan, Sheroz and Shahid, Zeeshan (2019) An implementation of electroencephalogram signals acquisition to control manipulator through brain computer interface. In: 2nd IEEE International Conference on Innovative Research and Development (ICIRD 2019), 28th-30th June 2019, Jakarta, Indonesia.

Shaikh, Faraz Ahmed and Khan, Sheroz and Zaharudin, Zarimin and Alam, Zahirul and Abdul Rahman, Farah Diyana and Badron, Khairayu and Yaacob, Mashkuri and Shahid, Zeeshan and Shaikh, Humaiz and Ahmed, Syed Faiz (2018) Detection and analysis of metal impairment inside wall using UWB modified antipodal vivaldi antenna. In: 2017 4th IEEE International Conference on Engineering Technologies and Applied Sciences (ICETAS), 29th Nov. - 1st Dec. 2017, Salmabad, Bahrain.

Elshaibani, Duaa and Greibea, Sara and Alakeili, Loubna and Hammoda, Ahmed and Tahir, Ahmed and Khalil, Ashraf F. and Hassan, Zakariya and Khan, Sheroz and Ahmed, Syed Faiz and Ali, Athar (2018) Simulation and practical implementation of a SEIG used in wind energy systems with rectified output voltage. In: 4th IEEE International Conference on Engineering Technologies and Applied Sciences, ICETAS 2017, 29 November - 1 December 2017, AMA International University Salmabad; Bahrain.

Zuheir, Mohammad and El-Faitouri, Abdulhafed S. and Rajab, Zakariya and Khalil, Ashraf F. and Alfergani, Asma and Khan, Sheroz and Ahmed, Syed Faiz and Ali, Athar (2018) A comparison between solar thermal and photovoltaic/thermal (PV/T) systems for typical household in Libya. In: 4th IEEE International Conference on Engineering Technologies and Applied Sciences, ICETAS 2017, 29 November - 1 December 2017, AMA International University Salmabad; Bahrain.

Daoud, Guerras and Aboadla, Ezzidin Hassan Elmabrouk and Khan, Sheroz and Ahmed, Syed Faiz and Tohtayong, Majdee (2018) Input-series output-parallel full-bridge DC-DC converter for high power applications. In: 4th IEEE International Conference on Engineering Technologies and Applied Sciences, ICETAS 2017, 29 November - 1 December 2017, AMA International University Salmabad; Bahrain.

Mohammed, Hibah and Gheriani, Haneen and Mohamed, Adel and Hammoda, Ahmed and Khalil, Ashraf F. and Khan, Sheroz and Ahmed, Syed Faiz and Ali, Athar (2018) Simulation and experimental verification of PID controlled DC/DC buck converter in wind energy conversion system. In: 4th IEEE International Conference on Engineering Technologies and Applied Sciences, ICETAS 2017, 29 November 2017 - 1 December 2017, AMA International University Salmabad; Bahrain.

Miqdad, A. and Kadir, Kushsairy and Ahmed, Syed Faiz and Janin, Zuriati and Khan, Sheroz (2016) Space cooling load monitoring system with IoT. In: 2018 IEEE 5th International Conference on Smart Instrumentation, Measurement and Application (ICSIMA), 28th-30th November 2018, Songkla, Thailand.

This list was generated on Thu Dec 5 03:21:33 2024 +08.