Items where Author is "Ahmed, Shugata "

Ahmed, Shugata and Sulaeman, Erwin and Ismail, Ahmad Faris and Hasan, Muhammad Hasibul and Hanouf, Zahir (2022) Effects of operating conditions on evaporation rate and wall shear stress development in a micro-gap heat sink with internal micro-fins. CFD Letters, 14 (2). pp. 1-9. ISSN 2811-3969

Ahmed, Shugata and Sulaeman, Erwin and Ismail, Ahmad Faris and Hasan, Muhammad Hasibul and Hanouf, Zahir (2021) Thermal resistance and pressure drop minimization for a micro-gap heat sink with internal micro-fins by parametric optimization of operating conditions. CFD Letters, 13 (12). pp. 100-112. ISSN 2180-1363

Ahmed, Shugata and Ismail, Ahmad Faris and Sulaeman, Erwin and Hasan, Muhammad Hasibul (2019) Experimental correlation for flow-boiling heat transfer in a micro-gap evaporator with internal micro-fins. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 54 (1). pp. 1-8. ISSN 2289-7879

Ahmed, Shugata and Sulaeman, Erwin and Ismail, Ahmad Faris and Muhammad, Hasibul Hasan (2018) Two-phase fin-induced turbulent cooling for electronic devices using heat pump associated micro-gap Heat Sink. International Journal of Engineering & Technology, 7 (3.13). pp. 113-122. ISSN 2227-524X

Ahmed, Shugata and Hassan, Muhammad Hasibul and Ismail, Ahmad Faris and Sulaeman, Erwin (2016) Effect of geometrical parameters on boiling heat transfer and pressure drop in micro finned micro gap. ARPN Journal of Engineering and Applied Sciences, 11 (1). 297 -302. ISSN 1819-6608

Ahmed, Shugata and Ismail, Ahmad Faris and Sulaeman, Erwin and Hassan, Muhammad Hasibul (2016) Study on turbulent characteristics of flow boiling in a micro gap under the influence of surface roughness and micro fins. ARPN Journal of Engineering and Applied Sciences, 11 (1). pp. 410-414. ISSN 1819-6608

Ahmed, Shugata and Ismail, Ahmad Faris and Sulaeman, Erwin and Muhammad, Hasibul Hasan (2016) A critical assessment on evaporative cooling performance of micro finned micro gap for high heat flux applications. ARPN Journal of Engineering and Applied Sciences, 11 (1). pp. 331-336. ISSN 1819-6608

Ahmed, Shugata and Ismail, Ahmad Faris and Sulaeman, Erwin and Hasan, Muhammad Hasibul (2016) A comparative analysis of flow boiling in micro-gaps with internal micro-fins of rectangular and triangular profiles. International Journal of Applied Engineering Research, 11 (4). pp. 2364-2372. ISSN 0973-4562

Ahmed, Shugata and Hasan, Muhammad Hasibul and Ismail, Ahmad Faris and Sulaeman, Erwin (2015) Effect of geometrical parameters on boiling heat transfer and pressure drop in micro finned micro gap. In: International Postgraduate Conference on Engineering Research (IPCER) 2015 , 27 - 28 Oct 2015, Gombak. (Unpublished)

Ahmed, Shugata and Ismail, Ahmad Faris and Sulaeman, Erwin and Hasan, Muhammad Hasibul (2015) Study on turbulent characteristics of flow boiling in a micro gap under the influence of surface roughness and micro fins. In: International Postgraduate Conference on Engineering Research (IPCER) 2015 , 27th-28th Oct. 2015, International Islamic University Malaysia (IIUM), Gombak, Kuala Lumpur.

Ahmed, Shugata and Ismail, Ahmad Faris and Sulaeman, Erwin and Hasan, Muhammad Hasibul (2015) A critical assessment on evaporative cooling performance of micro finned micro gap for high heat flux applications. In: International Postgraduate Conference on Engineering Research (IPCER) 2015 , 27th-28th Oct. 2015, Gombak Campus, IIUM. (Unpublished)

Ahmed, Shugata and Seder, Islam M.F. and Ab. Manaf, Hazli and Ahmed, Mirghani Ishak and Hawlader, Mohammad Nurul Alam (2014) Numerical investigation of flow boiling in double-layer microchannel heat sink. In: International conference on Materials,Mechatronics, Manufacturing & Mechanical Engineering 2014, 24th-25th September 2014, Kuching , Sarawak, Malaysia . (Unpublished)

Ahmed, Mirghani Ishag and Seder, Islam M.F. and Ahmed, Shugata (2014) Feasibility of double-layer microchannel fabrication at low speed micro end-mill and wire-cut EDM machines. In: International Conference on Materials, Mechatronics, Manufacturing & Mechanical Engineering, 24-25 Oct 2014, Kuching , Sarawak, Malaysia . (Unpublished)

Seder, Islam M.F. and Ahmed, Mirghani Ishag and Ahmed, Shugata and Hawlader, M.N.A. (2014) Feasibility of double-layer microchannel fabrication at low speed micro end-mill and wire-cut EDM machines. Australian Journal of Basic and Applied Sciences, 8 (15). pp. 211-217. ISSN 1991-8178

Manaf, Hazli and Ahmed, Shugata and Ahmed, Mirghani Ishak and Hawlader, Mohammad Nurul Alam (2014) A triangular double layer microchannel heat sink: effect of parallel and counter flow. In: 2nd International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2014), 23rd - 25th September 2014, Kuala Lumpur . (Unpublished)

Ahmed, Shugata and Seder, Islam M.F. and Ab. Manaf, Hazli and Ahmed, Mirghani Ishak and Hawlader, Mohammad Nurul Alam (2014) Numerical investigation of flow boiling in double-layer microchannel heat sink. Australian Journal of Basic and Applied Sciences, 8 (15 ). pp. 18-24. ISSN 1991-8178