Items where Author is "Ahmad, Zuraida"
 | Up a level |
Article
Abd Halim, Nor Farah Huda and Mustafa, Aisyah Madihah and Shaharudin, N.S. and Dahnel, Aishah Najiah and Tomadi, Siti Haryani and Ahmad, Zuraida and Adesta, E.Y.T. and Rahman, M. (2023) Tool wear and wear mechanism of WC-Co End Mill during milling of CFRP in sustainable cutting conditions. Materials Science Forum, 1109. pp. 153-158. ISSN 0255-5476 E-ISSN 1662-9752
Ahmad Shahrim, Nur’Aishah and Mohd Hafiz, Nur Nadia and Ahmad, Zuraida and Wong Azman, Amelia and Buys, Yose Fachmi and Sarifuddin, Norshahida (2022) Ink based on poly(3,4-ethylene dioxythiophene), poly(sulfonostyrene) and silver nanoparticles (PEDOT/PSS/SNP) blends for fabrics printing. Polimery, 67 (6). pp. 249-254. ISSN 0032-2725
Ahmad, Zuraida and Mohamed Noor, Noraini and Toha, Siti Fauziah and Hasbullah, Nurul Fadzlin and Sophian, Ali and Mel, Maizirwan (2021) Aspirational ethics as a contributing factor in engineering students’ ethical awareness and behavior. IIUM Journal of Educational Studies, 9 (3). pp. 17-36. ISSN 2289-8085
Sarifuddin, Norshahida and Ahmad, Zuraida and Ahmad Azhar, Ahmad Zahirani and Mohd Zaki, Hafizah Hanim and Azman, Amelia Wong and Nordin, Norhuda Hidayah (2021) Modeling humanizing education through newly reviewed materials engineering curriculum. IIUM Journal of Education Studies, 9 (3). pp. 63-79. ISSN 2289-8085
Ahmad Shahrim, Nur'Aishah and Ahmad, Zuraida and Wong Azman, Amelia and Buys, Yose Fachmi and Sarifuddin, Norshahida (2021) Mechanisms for doped PEDOT:PSS electrical conductivity improvement. Materials Advances, 2 (22). pp. 7118-7138. ISSN 2633-5409
Samat, Noorasikin and Sulaiman, Muhammad Afnan and Ahmad, Zuraida and Anuar, Hazleen (2021) A comparative study on the desiccant effect of polypropylene and polylactic acid composites reinforced with different lignocellulosic fibres. Journal of Applied Science and Engineering, 24 (2). pp. 223-231. ISSN 2708-9975
Abuhamed, Nader and Ahmad, Zuraida and Tajuddin, Maisarah (2020) Effects of halloysite nanotubes (HNT) structures on antimicrobial activity on TPSS Film. Malaysian Journal of Microscopy, 16 (2). pp. 119-127. ISSN 1823-7010, E-ISSN 2600-7444
Halim, Zahurin and Ahmad, Zuraida and Tajuddin, Maisarah (2020) Physical consolidation of rattan furniture waste fibers in self-bonded boards under morphological analysis. Malaysian Journal of Microscopy, 16 (2). pp. 112-118. ISSN 1823-7010 E-ISSN 2600-7444
Azmy, Udaimatunnoor and Ahmad, Zuraida and Ahmad Shahrim, Nur’Aishah Ahmad and Azman, Amelia Wong and Fajingbesi, Fawwaz Eniola (2020) Effects of silver nanoparticles concentration on resistivity of PEDOT: PSS thin conductive films. Test Engineering and Management, 83 (May - June 2020). pp. 1008-1013. ISSN 0193-4120
Jamhari, Fathin Illiana and Ahmad, Zuraida and Tajuddin, Maisarah and Abuhamed, Nader (2020) Allium sativum as antimicrobial agent in Thermoplastic Sago Starch (TPSS) films for dermal wound healing. Test Engineering and Management, 83 (May-June). pp. 1014-1019. ISSN 0193-4120
Ahmad, Zuraida (2020) Safer sanitary pads made from palm starch. Asia Research News, 6th May 2020.
Mamun, Abdullah Al and Muthalif, Asan G. A. and Ahmad, Zuraida and Ismail, Ahmad Faris and Ismail, Kamsiah and Maleque, Md. Abdul (2020) Islamisation of engineering education – a case at IIUM. Universal Journal of Educational Research, 8 (2). pp. 355-361. ISSN 2332-3205 E-ISSN 2332-3213
Ahmad, Zuraida and Tajuddin, Maisarah and Maleque, Md. Abdul and Halim, Zahurin (2019) Effects of particle sizes on the properties of binderless boards made from rattan furniture waste. Journal of Engineering Science, 15. pp. 49-61.
Yusuff, Mohamad Ikhwan and Sarifuddin, Norshahida and Ahmad, Zuraida (2019) Mechanical properties of woven carbon fiber/kenaf fabric reinforced epoxy matrix hybrid composites. MALAYSIAN JOURNAL OF MICROSCOPY, 15 (1). pp. 10-16. ISSN 1823-7010 E-ISSN 2600-7444
Ahmad, Zuraida and Hermain, Hazwan Yatimi and Abdul Razak, Nur Humairah (2018) Characterizations and biodegradability of solvent casting halloysite nanotubes/sago starch nanocomposite. Journal of Engineering Science and Technology, 13 (Issue Special Issue on WRICET (2016)). pp. 86-93. ISSN 1823-4690
Ahmad, Zuraida and Tajuddin, Maisarah and Salim, Nurul Farhana Fatin and Halim, Zahurin (2018) Effect of alkaline treatment on properties of rattan waste and fabricated binderless particleboard. IIUM Engineering Journal, 19 (1). pp. 185-196. ISSN 1511-788X E-ISSN 2289-7860
Ahmad, Zuraida and Yahaya, Insyirah and Tajuddin, Maisarah (2018) Morphological and thermal analysis of retted rattan waste fibers. International Journal of Current Science, Engineering & Technology, 1 (Special Issue 1). pp. 403-409. ISSN 2581-4311
Samat, Noorasikin and Ghazali, Nurul Najihah and Ahmad, Zuraida and Ali, Fathilah (2018) Non-acidic method for isolation of microcrystalline cellulose from oil palm empty fruit bunch fiber. International Journal of Engineering & Technology, 7 (4014). pp. 339-342. ISSN 2227-524X
Tajuddin, Maisarah and Ahmad, Zuraida and Ahmad, Roszalia and Halim, Zahurin (2017) Effects of pressing temperature and pressing time onto the properties of binderless particleboard made from rattan furniture waste. Journal of Built Environment, Technology And Engineering (JBETE), 3. pp. 11-18. ISSN 0128-1003
Ahmad, Zuraida and Tajuddin, Maisarah and Wan Mohd Yusof, Wan-Shazlin Maisarah (2017) Mechanical, physical and thermal properties of rattan fibre-based binderless board. Journal of Tropical Forest Science, 29 (4). pp. 485-492. ISSN 0128-1283
Zain, Saidi and Ahmad, Zuraida and Ismail, Ahmad Faris and Salah, Machouche and Mohamad, Souad A. (2016) Development of integrated science textbooks by applying the enrich tool. Journal of Education and Social Sciences (JESOC). pp. 6-13. E-ISSN 2289-9855
Zain, Saidi and Ahmad, Zuraida and Ismail, Ahmad Faris and Salah, Machouche and Mohamad, Souad A. and Hasbullah, Nurul Fadzlin and Toha, Siti Fauziah (2016) Development of integrated curriculum and teaching materials for science/engineering courses. Journal of Education and Social Sciences, 4. pp. 18-25. E-ISSN 2289-9855
Ahmad, Zuraida and Zain, Saidi and Ismail, Ahmad Faris and Salleh, Md. Noor and Machouche, Salah (2016) Students perceptions on infusion of Islamic perspectives in the teaching of engineering subjects: IIUM case study. Journal of Education and Vocational Research (JESOC), 4. pp. 1-7. E-ISSN 2289-9855
Tajuddin, Maisarah and Ahmad, Zuraida and Ismail, H. (2016) A review of natural fibers and processing operations for the production of binderless boards. BioResources, 11 (2). pp. 5600-5617. ISSN 1930-2126
Md Yusof, Fauziah and Abd Rahim, Mohd Khairul Hazami and Samsudin, Ahmad Safwan and Mohamad Nor, Nor Hafiez and Ahmad, Zuraida and Halim, Zahurin (2016) Optimization of natural fiber composite parameter using Taguchi approach. Advanced Materials Research, 1133. pp. 185-188. ISSN 1022-6680
T., Maisarah and Ahmad, Zuraida and A., Marjan (2015) The effect of black liquor on rattan waste binderless board (BPB) produced via digestion-hot pressing (DHP) process. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 9753-9758. ISSN 1819-6608
Esalami, Fayezeh and Ahmad, Zuraida and Abdul Razak, Nur Humairah (2015) Gamma irradiated starch based hydrogel impregnated with silver nanoparticle. Advanced Materials Research, 1115. pp. 390-393. ISSN 1022-6680
Ahmad, Zuraida and Hermain, Hazwan Yatimi and Abdul Razak, Nur Humairah (2015) Mechanical and physical properties of sago starch/halloysite nanocomposite film. Advanced Materials Research, 1115. pp. 394-397. ISSN 1662-8985
Ahmad, Zuraida and A.K. , Ahmad Ulwi and T., Maisarah and A., Maisarah (2015) Characterization and preparation of sago starch (SS) based reinforced with silver nanoparticle (SNP). Advanced Materials Research, 1115. pp. 369-372. ISSN 1662-8985
T., Maisarah and Ahmad, Zuraida and A., Roszalia and M.A, Luqman (2015) Characterization of rattan waste for binderless particleboard (BPB) production. Advanced Materials Research, 1115. pp. 317-320. ISSN 1662-8985
Hassan, Noor Azlina and Hassan, Norita and Johari, Norhasnidawani and Halim, Zahurin and Ahmad, Zuraida (2015) Mechanical properties of kenaf core sandwich panel toughened with modified epoxy. Advanced Materials Research, 1115. pp. 275-278. ISSN 1662-8985
Bello, Kamilu Adeyemi and Maleque, Md. Abdul and Ahmad, Zuraida and S. , Mirdha (2015) Optimization of hardness behaviour of TIG modified ceramic coating using the taguchi approach. Advanced Materials Research, 1115. pp. 238-242. ISSN 1022-6680
Samat, Noorasikin and Zulkapli, Nor Najihah and Halim, Zahurin and Ahmad, Zuraida and Abang Ismawi Hassim, Dayang Habibah (2015) Study of mechanical and flammability properties of polypropylene/microcrystalline cellulose composites filled with nano-sized aluminium hydroxide (ATH) particles. Advanced Materials Research, 1115. pp. 402-405. ISSN 1022-6680
Ahmad, Zuraida and Eslami, Fayezeh and Abdul Wahab, Ahsanul Khaliqin (2015) Swelling properties of gamma irradiated starch based hydrogel dressing. International Journal of Innovative Science, Engineering & Technology, 2 (8). pp. 933-936. ISSN 2348 – 7968
Bello, Kamilu Adeyemi and Maleque, Md. Abdul and Ahmad, Zuraida and S. , Mirdha (2015) Synthesis of co-deposited hexagonal boron nitride for thermally-efficient tribological performance. Advanced Materials Research, 1115. pp. 166-169. ISSN 1022-6680
Sarifuddin, Norshahida and Ismail, Hanafi and Ahmad, Zuraida (2014) Incorporation of kenaf core fibers into low density polyethylene/thermoplastic sago starch blends exposed to natural weathering. Molecular Crystals and Liquid Crystals, 603 (1). pp. 180-193. ISSN 1542-1406 E-ISSN 1563-5287
Ahmad, Zuraida and Halim, Zahurin and Mohamad, Souad A. and Salleh, Md. Noor and Ismail, Ahmad Faris (2014) Tapping into student’s passion, curiosity, engagement and dreams: engineering educator’s task. Science International Lahore, 26 (5). pp. 2569-2575. ISSN 1013-5316
Ahmad, Zuraida and Z. N., Najiah and Abdul Razak, Nurhumairah and Sarifuddin, Norshahida (2014) Properties of thermoplastic starch/kenaf composite. Molecular Crystals and Liquid Crystals, 603 (1). pp. 173-179. ISSN 1542-1406 E-ISSN 1563-5287
Sarifuddin, Norshahida and Ismail, Hanafi and Ahmad, Zuraida (2014) Preparation and characterization of low density polyethylene/thermoplastic sago starch/kenaf core fiber composites and their hybrid composites with halloysite clay. Advances in Environmental Biology, 8 (3). pp. 704-711. ISSN 1995-0756 E-ISSN 1998-1066
Sarifuddin, Norshahida and Ismail, Hanafi and Ahmad, Zuraida (2014) Influence of halloysite nanotubes hybridized with kenaf core fibers on the physical and mechanical properties of low density polyethylene/thermoplastic sago starch blends. Polymer-Plastics Technology and Engineering, 53. pp. 107-113. ISSN 1525-6111 (O), 0360-2559 (P)
Abdul Razak, Nur Humairah and Ahmad, Zuraida and Sarifuddin, Norshahida and Z.S., Naqiah (2014) Characterizations of thermoplastic starch and starch reinforced montmorillonite clay nanocomposite. Advances in Environmental Biology, 8 (3). pp. 792-796. ISSN 1995-0756 E-ISSN 1998-1066
Abdul Razak, Nur Humairah and Ahmad, Zuraida and Sarifuddin, Norshahida and A. W N, Izwah (2014) Effect of kenaf fibre on starch based biopolymer composite. Advances in Environmental Biology, 8 (3). pp. 765-769. ISSN 1995-0756 E-ISSN 1998-1066
Ahmad, Zuraida and Abdul Razak, Nur Humairah and Mohd Roslan, Nur Suraya and Mosman, Nazariah (2014) Evaluation of Kenaf Fibres Reinforced Starch Based Biocomposite Film through Water Absorption and Biodegradation Properties. Journal of Engineering Science, 10. pp. 31-39. ISSN 1823-3430
Sarifuddin, Norshahida and Ismail , Hanafi and Ahmad, Zuraida (2013) Low Density Polyethylene (LDPE)/ Thermoplastic Sago Starch (TPSS) blend Filled Kenaf Core Fiber (KCF). Advanced Materials Research, 626. pp. 1048-1053. ISSN 1022-6680
Sarifuddin, Norshahida and Ahmad, Zuraida and Ismail , Hanafi (2013) The effect of kenaf core fibre loading on properties of low density polyethylene/thermoplastic sago starch/kenaf core fiber composites. Journal of Physical Science , 24 (2). pp. 97-115. ISSN 1675-3402
Omar, Nurizan and Ahmad, Zuraida (2013) The effects of initiator content on sago (metroxylon rottb.) starch-G-PAN hydrogel. Advanced Materials Research, 683. pp. 218-221. ISSN 1022-6680
Abdul Razak, Nur Humairah and Ahmad, Zuraida (2012) Properties of sago starch-nanoclay biocomposites film. Advanced Materials Research, 576. pp. 480-483. ISSN 1022-6680
Ahmad, Zuraida and Abdul Razak, Nur Humairah and Abdul Wahid, Nur Izwah and Zulkifli, Siti Naqiah (2012) The study of glycerol plasticized thermoplastic sago starch. Advanced Materials Research, 576. pp. 289-292. ISSN 1022-6680
Ahmad, Zuraida and Othman, Raihan and Ismail, Ahmad Faris (2012) Integrating and infusing of Islamic values in the existing engineering course subject: a case study. Advances in Natural and Applied Sciences, 6 (5). pp. 625-632. ISSN 1995-0772
Ahmad, Zuraida and Yusof, Yusliza and Omar, Nurihan and Anuar, Hazleen and Halim, Zahurin and Samat, Noorasikin (2012) Properties of montmorillonite-reinforced thermoplastic sago starch composites. Advanced Materials Research, 445. pp. 469-474. ISSN 1022-6680
Sarifuddin, Norshahida and Ismail, Hanafi and Ahmad, Zuraida (2012) Effect of fiber loading on properties of thermoplastic sago starch/kenaf core fiber biocomposites. BioResources, 7 (3). pp. 4294-4306. ISSN 1930-2126
Anuar, Hazleen and Ahmad, Zuraida and Kovacs, J. G. and Tabi, T. (2012) Improvement of Mechanical Properties of Injection-Molded Polylactic Acid–Kenaf Fiber Biocomposite. Journal of Thermoplastic Composite Materials, 25 (2). pp. 153-164. ISSN 0892 - 7057
Alias, Tuti Yasmin and Idris, Mohd Hasbullah and Ahmad, Zuraida and Ourdjini, Ali (2012) Rheological behavior and stability of cassava starch for ceramic mould binder application. Advanced Materials Research, 576. pp. 162-165. ISSN 1022-6680
Ahmad, Zuraida and Yusof, Yusliza and Anuar, Hazleen and R., Mohd Khairul Muhaimin (2012) The effect of water and citric acid on sago starch bio-plastics. International Food Research Journal, 19 (2). pp. 715-719. ISSN 19854668 (P), 22317546 (O)
Ahmad, Zuraida and Ismail, Ahmad Faris and Shafie, Amir Akramin and Ihsan, Sany Izan and Halim, Zahurin and Mohamad, Souad A. (2011) Islamisation of engineering education in International Islamic University Malaysia (IIUM): problems and prospect. Revelation and Science, 1 (3). pp. 131-137. ISSN 2229-9947
Abdul Rahman, Fariza and Ahmad, Zuraida and Iis, Sopyan (2011) Egg Yolk as pore creating agent to produce porous tri-calcium phosphate for bone implant application. Advanced Materials Research, 265. pp. 760-764. ISSN 1662-8985
Anuar, Hazleen and Ahmad, Zuraida and Balint, Morlin and Jozsef Gabor, Kovacs (2011) Micromechanical property investigations of poly(lactic acid)-kenaf fiber biocomposites. Journal of Natural Fibers, 8 (1). pp. 14-26. ISSN 1544-046X (O), 1544-0478 (P)
Anuar, Hazleen and Ahmad, Zuraida (2011) Improvement in mechanical properties of reinforced thermoplastic elastomer composite with kenaf bast fibre. Composites: Part B: Engineering, 42. pp. 462-465. ISSN 1359-8368
Ahmad, Zuraida and Anuar, Hazleen and Halim, Zahurin and Abang Haji Abdul Majid, Dayang Laila and Md Yusof, Fauziah (2011) Cotton reinforced biopolymer matrix composite: effect of ultraviolet (UV) on its mechanical properties. Key Engineering Materials, 472-72. pp. 928-932. ISSN 1013-9826
Ahmad, Zuraida and Yusof, Yusliza and Halim, Zahurin and Md. Yusof, Fauziah (2011) Cotton reinforced biopolymer matrix composite: effect of curing and aging conditions on its mechanical properties. Key Engineering Materials, 471-72. pp. 403-408. ISSN 1013-9826
Ahmad, Fadli and Sopyan, Iis and Mel, Maizirwan and Ahmad, Zuraida (2011) Porous alumina through protein foaming–consolidation method: effect of dispersant concentration on the physical properties. Asia-Pacific Journal of Chemical Engineering, 6. pp. 863-869. ISSN 1932-2143
Ahmad, Zuraida and Sarifuddin, Nurshahida and Iis, Sopyan and Halim, Zahurin (2011) Effect of fiber length variations on mechanical and physical properties of coir fiber reinforced cement-albument composites (CFRCC). IIUM Engineering Journal, 12 (1). pp. 63-75. ISSN 1511-788X
Anuar, Hazleen and Ahmad, Zuraida and Morlin, B. and Kovacs, J. G. (2011) Interfacial shear strength of Polylactic Acid-Kenaf fibre biocomposites. Key Engineering Materials, 471. pp. 781-785. ISSN ISSN: 1013-9826
Ahmad, Zuraida and H, Anuar (2011) Properties of compression moulding starch-nanoclay biocomposites. World Journal of Engineering, 8 (Supp.1). pp. 1377-1378. ISSN 1708-5284 (Unpublished)
Anuar, Hazleen and Ahmad, Zuraida (2011) Thermal properties of injection moulded polylactic acid 13 kenaf fibre biocomposite. Malaysian Polymer Journal, 6 (1). pp. 51-57. ISSN 1823-7789
Yusof, Yusliza and Ahmad, Zuraida (2011) The effect of fiber content on cotton reinforced albumen composites. IIUM Engineering Journal, 12 (2). ISSN 1511-788X
Ahmad, Zuraida and Anuar, Hazleen and Yusof, Yusliza (2011) The study of biodegradable thermoplastics sago starch. Key Engineering Materials, 471. pp. 397-402. ISSN 1013-9826
Abdul Rahman, Fariza and Ahmad, Zuraida and Iis, Sopyan (2010) Application of low cost polyurethane (PU) foam for fabricating porous tri-calcium phosphate (TCP). Journal of Biomimetics, Biomaterials and Tissue Engineering, 8. pp. 1-7. ISSN 1662-1018
Yusof, Yusliza and Ahmad, Zuraida and Iis, Sopyan (2008) Fracture behavior of natural fiber reinforced biopolymer matrix composite. Advanced Materials Research, 47. pp. 1189-1192. ISSN 1022-6680
Ahmad, Zuraida and Khalid, Asad. A. and Ismail, Ahmad Faris (2007) Performance of hybrid filament wound composites tubes subjected to quasi static indention. Materials and Design, 28. pp. 71-77. ISSN 0261-3069
Book
Ahmad, Zuraida, ed. (2011) SAGO (metroxylon rottb) and its applications. IIUM Press, Kuala Lumpur. ISBN 9789674181635
Book Chapter
Nik Abdullah, Nik Md Saiful Azizi and Hasbullah, Nurul Fadzlin and Ahmad, Zuraida (2024) The tools of Murabbis. In: World Class Murabbis (Teacher-Educator) Handbook. Islamic Book Trust, Selangor, Malaysia, pp. 60-80. ISBN 978-967-2795-20-9
Ahmad Shahrim, Nur'Aishah and Ahmad, Zuraida and Masaad, Intan Seirra and Zamros, Nur Afiqah and Azman, Amelia Wong and Sarifuddin, Norshahida and Buys, Yose Fachmi (2022) Comparative studies on the electrical properties of PEDOT:PSS doped SNP films and hydrogels for medical electrode applications. In: Key Engineering Materials. Trans Tech Publications Ltd, pp. 43-49. ISBN 1013-9826 (ISSN)
Ahmad, Zuraida and Zain, Saidi and Halim, Zahurin and Ismail, Ahmad Faris (2018) Perceptions of the students on the developed Islamic Integrated Physics Textbook (IIPT): a case study. In: Rejuvenating Islamic thought. IIUM Press, International Islamic University Malaysia, Kuala Lumpur, pp. 152-166. ISBN 978-967-491-010-5
Ahmad, Zuraida (2012) Surface properties and thermal behavior of Malaysian coir fiber. In: Materials in Engineering in Health Sciences. Universiti Sains Malaysia, Pulau Pinang, pp. 1-7. ISBN 978-983-861-533-4
Nordin, Norhuda Hidayah and Ahmad, Zuraida and Omar, Nurizan and Alias, Tuti Yasmin (2011) Comparative study between standard and commercial sago starch. In: SAGO (Metroxylan rottb) and its applications. IIUM Press, Kuala Lumpur, pp. 17-26. ISBN 9789674181635
Roslin, Amir Zakwan and A. Razak, Nur Humairah and Ahmad, Zuraida (2011) Effect of compaction time on the properties of coir fiber reinforced cement-albumen composite. In: Advances in composite materials. IIUM Press, Kuala Lumpur, pp. 68-73. ISBN 9789674182311
Ahmad, Zuraida and Abdul Rahman, Fariza (2011) Foam impregnation method for artificial bone graft application: study on the effect of sintering temperature. In: Advances in Materials Engineering - Volume 2. IIUM Press, Kuala Lumpur, pp. 84-88. ISBN 9789674181680
Ahmad, Zuraida and Halim, Zahurin and Md Yusof, Fauziah (2011) Investigation on the effect of ultra violet on cotton albumen composite. In: Advances in materials engineering - Volume 2. IIUM Press, Kuala Lumpur, pp. 96-99. ISBN 9789674181680
Halim, Zahurin and Ahmad, Zuraida and Md Yusof, Fauziah (2011) Investigation on the effect of water immersion on cotton albumen composite. In: Advances in composite materials. IIUM Press, Kuala Lumpur, pp. 178-181. ISBN 9789674182311
Ahmad, Zuraida and Purwanto, Hadi and Yusoff, Farrah (2011) Malaysian coir fibre for acoustical absorption cement composite panel. In: Malaysia natural fibers for diversed bio-based application. IIUM Press, Kuala Lumpur, pp. 39-48. ISBN 9789674180218
Teoh, Swin Le and Samannamunthaliar, Kumaran and Ahmad, Zuraida (2011) Mechanical behaviour of Biopolymer Cotton Albumen Clay (BCAC) composites. In: Advances in composite materials. IIUM Press, Kuala Lumpur, pp. 144-149. ISBN 9789674182311
Omar, Afiqah and A. Razak, Nur Humairah and Ahmad, Zuraida (2011) Mechanical behaviour of Oil Palm Empty Fruit Bunch (OPEFB) albumen-composites concrete. In: Advances in composite materials. IIUM Press, Kuala Lumpur, pp. 49-54. ISBN 9789674182311
Omar, Afiqah and A. Razak, Nur Humairah and Ahmad, Zuraida (2011) Oil Palm Empty Fruit Bunch (OPEFB) for lightweight composites concrete. In: Advances in composite materials. IIUM Press, Kuala Lumpur, pp. 74-79. ISBN 9789674182311
Ahmad, Zuraida and Abdul Razak, Nur Humairah and Omar, Nurihan and Yusoff, Farrah (2011) Overview on Malaysia natural fibres and its applications. In: Malaysia natural fibers for diversed bio-based application. IIUM Press, Kuala Lumpur, pp. 1-19. ISBN 9789674180218
Sarifuddin, Norshahida and Ismail , Hanafi and Ahmad, Zuraida (2011) Preparation and characterization of glycerol plasticized sago starch-Kenaf core fibers biocomposites. In: SAGO (Metroxylan rottb) and its applications. IIUM Press, Kuala Lumpur, pp. 101-114. ISBN 9789674181635
Omar, Nurizan and Ahmad, Zuraida (2011) SEM analysis of coir fiber and coir fiber-albumen-concrete before and after surface treatments. In: Manufacturing management from basic machining to quality product. IIUM Press, Kuala Lumpur, pp. 220-229. ISBN 9789674181659
Omar, Nurizan and Ishak , Norazah and Ahmad, Zuraida (2011) Sago starch: nanoclay biocomposites film. In: SAGO (Metroxylan rottb) and its applications. IIUM Press, Kuala Lumpur, pp. 87-99. ISBN 9789674181635
Omar, Nurizan and ., Nur Humairah and Mohd Hatta, Maziati Akmal and Ahmad, Zuraida (2011) Sago, its properties and applications: a review. In: SAGO (Metroxylan rottb) and its applications. IIUM Press, Kuala Lumpur, pp. 1-15. ISBN 9789674181635
Ahmad, Zuraida and Teoh, Swin Le and Samannamunthaliar, Kumaran (2011) Thermal and morphological study of Biopolymer Cotton-Albumen Clay (BCAC) composites. In: Advances in composite materials. IIUM Press, Kuala Lumpur, pp. 62-67. ISBN 9789674182311
Abdul Razak, Nur Humairah and Ahmad, Zuraida (2011) Workability of coir fibre-reinforced cement-albumen composite. In: Advances in materials engineering. IIUM Press, Kuala Lumpur, pp. 195-200. ISBN 9789674181673
Razali, Faridatul Faezah and Abdul Razak, Nur Humairah and Ahmad, Zuraida (2011) The effect of fibre content on thermal property of coir fibre reinforced cement-albumen composite. In: Advances in materials engineering. IIUM Press, Kuala Lumpur, pp. 172-177. ISBN 9789674181673
Ahmad, Zuraida and Omar, Nurizan (2011) The effects of chemical and mechanical treatments on coir fiber to mechanical properties of coir-albumen-concrete. In: Advances in composite materials. IIUM Press, Kuala Lumpur, pp. 108-113. ISBN 9789674182311
Sarifuddin, Norshahida and Ahmad, Zuraida (2011) The influence of biopolymer and natural fiber on the physical and mechanical properties of cement composite. In: Advances in composite materials. IIUM Press, Kuala Lumpur, pp. 55-61. ISBN 9789674182311
Yussof, Farrah and Ahmad, Zuraida (2011) An investigation of hybrid composites tubes subjected to quasi-static loading. In: Advances in composite materials. IIUM Press, Kuala Lumpur, pp. 138-143. ISBN 9789674182311
Proceeding Paper
Che Ahmad, Aminudin and Al-Azmi, Abdul Rahman and Ahmad, Zuraida and Samat, Noorasikin and Sarifuddin, Norshahida and Awang, Mohd Shukrimi (2024) Comparative study of kaolin and bentonite clay as potential materials for halal sertu in healthcare applications. In: International Halal Congress 2024, 17th - 19th May 2024, Ankara, Turkey.
Amir, Adibah and Ahmad, Zuraida and Toha @ Tohara, Siti Fauziah and Hasbullah, Nurul Fadzlin and Mel, Maizirwan and Haji Hassan, Masjuki and Ismail, Md Yusof (2023) Enhancing engineering ethics understanding: impact of the teaching and learning approaches and curriculum. In: 6th International Conference on Engineering Professional Ethics and Education 2023 (ICEPEE'23), 15th - 16th August 2023, Virtual Conference.
Ashraf, Arselan and Sophian, Ali and Ahmad, Zuraida (2022) Implementing critical thinking methods in Engineering Curriculum. In: 5th International Conference on Engineering Professional Ethics and Education (ICEPEE'22), 9th -10th August 2022, Online via Zoom and Face to Face at IIUM. (Unpublished)
Fajingbesi, Fawwaz Eniola and Azman, Amelia Wong and Ahmad, Zuraida and Olanrewaju, Rashidah Funke and Ibrahimy, Muhammad Ibn and Mohd. Mustafah, Yasir (2020) Low cost piezoresistive pressure sensor matrix for pressure ulcer prevention and management. In: 2019 7th International Conference on Mechatronics Engineering (ICOM) 2019, 30th–31st October 2019, Putrajaya.
Azman, Amelia Wong and Fajingbesi, Fawwaz Eniola and Ahmad, Zuraida and Mohd Mustafah, Yasir and Olanrewaju, Rashidah Funke and Hamzaid, Nur Azah (2019) Electrical stimulation in combating pressure ulcer for immobilize subjects: a conceptual framework. In: International Conference on Biomedical Engineering, 26 - 27 Aug 2019, Penang Island.
Samat, Noorasikin and Ghazali, Nurul Najihah and Ahmad, Zuraida and Ali, Fathilah (2018) Non-acidic method for isolation of microcrystalline cellulose from oil palm empty fruit bunch fiber. In: 2nd International Conference on Applied Sciences and Industrial Technology (ICASIT 2018), 14th-15yh November 2018, Melaka. (Unpublished)
Ahmad, Zuraida and Y., Insyirah and Tajuddin, Maisarah and Halim, Zahurin (2018) Influence of fiber treatment on dimensional stabilities of rattan waste composite boards. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, 8-9 August 2017, Kuala Lumpur, Malaysia.
Tajuddin, Maisarah and Ahmad, Zuraida and Halim, Zahurin and Maleque, Md Abd and Ismail, Hanafi and Sarifuddin, Norshahida (2017) Physical properties of heat-treated rattan waste binderless particleboard. In: 3rd International Conference of Global Network for Innovative Technology 2016: Advanced Materials for Innovative Technologies, IGNITE 2016, 27th–29th January 2016, Penang, Malayia.
Zain, Saidi and Ismail, Ahmad Faris and Ahmad, Zuraida and Adesta, Erry Yulian Triblas (2017) Analysis of design tool attributes with regards to sustainability benefits. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017), 8th–9th August 2017, Kuala Lumpur, Malaysia.
Zain, Saidi and Adesta, Erry Yulian Triblas and Ismail, Ahmad Faris and Ahmad, Zuraida (2016) Sustainable manufacturing framework from Islamic perspective. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25-27 Jul 2016, Kuala Lumpur, Malaysia.
Zain, Saidi and Ahmad, Zuraida and Ismail, Ahmad Faris and Machouche, Salah and Mohamad, Souad A. and Hasbullah, Nurul Fadzlin and Toha @ Tohara, Siti Fauziah (2016) Development of integrated curriculum and teaching materials for science/engineering courses. In: Kuala Lumpur International Islamic Studies and Civilisations (KLiISC) 2016, 7th-8th May 2016, Kuala Lumpur.
Tajuddin, Maisarah and Ahmad , Zuraida and Sulaiman, Mohd Faris Haikal and Halim, Zahurin and Maleque, Md. Abdul (2016) Fungi growth on rattan board exposed to natural weathering. In: 4th International Conference on Biotechnology Engineering 2016 (ICBioE 2016), 25th-27th July 2016, Kuala Lumpur.
Bello, Kamilu Adeyemi and Maleque, Md. Abdul and Ahmad, Zuraida and Mirdha, S. (2015) Development of activated hexagonal boron nitride for tribo-composite coatings using electroless nickel plating technique. In: 3rd International Doctoral Student Symposium with Partner Universities, 25-28 February 2015, Hokkaido University, Sapporo, Japan.
Adeyemi, Bello K. and Maleque, Md. Abdul and Ahmad, Zuraida and Adebisi, Adetayo A. and Mirdha, S. (2015) Preparation and characterization of TIG-alloyed hybrid composite coatings for high-temperature tribological applications. In: Malaysian International Tribology Conference 2015, 16th-17th Nov. 2015, Penang, Malaysia.
Maleque, Md. Abdul and Bello , K. and Ahmad , Zuraida (2014) Engineered hexagonal boron nitride utilizing environmental friendly co-deposition technique. In: International Research, Invention and Innovation Exhibition 2014 (IRIIE2014), 11th -13th June 2014, Cultural Activity Center (CAC), Internatioanal Islamic University Malaysia. (Unpublished)
Maleque, Md. Abdul and K.A., Bello and Ahmad, Zuraida (2014) Noble electroless Ni-P deposited hexagonal boron nitride for effective solid lubricant application. In: Malaysia Technology Expo 2014, 20-22 Feb 2014, Kuala Lumpur, Malaysia. (Unpublished)
Ahmad, Zuraida and Halim, Zahurin (2013) Creativity and the future of engineering education: making the strange familiar. In: International Conference on Engineering Education 2013, 22nd-25th Dec. 2013, Madinah, Kingdom of Saudi Arabia.
Samat, Noorasikin and Ahmad, Zuraida and Halim, Zahurin and Anuar, Hazleen and Sabaruddin, Fatimah Atiyah (2012) Mechanical and flammability properties of PVC reinforced with nano-sized ATH particles. In: International Conference on Nanotechnology (ICONT 2012), 29 May – 01 June 2012, Pahang. (Unpublished)
Anuar, Hazleen and Ahmad, Zuraida and Kovacs, J. G. and Tabi, T. (2011) Comparison of theoretical and experimental values of tensile properties of injection moulded polylactic acid – kenaf fibre biocomposite. In: 14th International Conference on Advances in Material and Processing Technologies (AMPT 2011), 13-16 July 2011, Istanbul, Turkey. (Unpublished)
Halim, Zahurin and Ahmad, Zuraida and Samat, Noorasikin and Anuar, Hazleen (2011) Study of new eco-core metal matrix composite sandwich structure. In: 14th International Conference on Advances in Material and Processing Technologies (AMPT 2011), 13 - 16 July 2011, Istanbul, Turkey. (Unpublished)
Sopyan, Iis and Mardziah, M. and Ahmad , Zuraida (2011) Fabrication of porous ceramic scaffolds via polymeric sponge method using sol-gel derived strontium doped hydroxyapatite powder. In: 5th Kuala Lumpur International Conference on Biomedical Engineering, BIOMED 2011, 20-23 June 2011, Kuala Lumpur, Malaysia.
Anuar, Hazleen and Fuad, Faizah and Kaiser, Mohammad Rejaul and Ahmad, Zuraida and Abdul Razak, Shamsul Bahri (2011) The effect of nanoclay on the tensile properties of PLA-kenaf fibre hybrid bionanocomposite. In: International Conference on Advanced Manufacturing of Composites (ICMAC), 22-24 March 2011, Belfast, United Kingdom. (Unpublished)
Anuar, Hazleen and Kaiser, Mohammad Rejaul and Fuad, Faizah and Ahmad, Zuraida (2011) Eco-friendly PLA-kenaf fibre biocomposite for food packaging. In: Malaysia Technology Expo (MTE 2011), 17-19 February 2011, KLCC. (Unpublished)
Anuar, Hazleen and Kaiser, Mohammad Rejaul and Fuad, Faizah and Ahmad, Zuraida (2011) Eco-friendly PLA-kenaf fibre biocomposite for food packaging. In: IIUM Research, Invention and Innovation Exhibition (IRIIE) 2011, 9-10 February 2011, Cultural Activity Centre (CAC) and KAED Gallery IIUM.
Anuar, Hazleen and Ahmad, Zuraida (2011) Injection moulded lightweight kenaf fibre thermoplastic elastomer composite for automotive components. In: IIUM Research, Invention and Innovation Exhibition (IRIIE) 2011, 9-10 February 2011, Cultural Activity Centre (CAC) and KAED Gallery IIUM. (Unpublished)
Ahmad, Zuraida and Purwanto, Hadi and Sarifuddin, Norshahida and R. F. , Faezah and Y. , Farrah (2011) Acoustical and thermal properties of lightweight coir fiber reinforced cements composites. In: IIUM Research, Invention and Innovation Exhibition (IRIIE) 2011, 9-10 February 2011, Cultural Activity Centre (CAC) and KAED Gallery IIUM. (Unpublished)
Ahmad, Zuraida (2011) Integrating and infusing of Islamic values in the existing engineering course subject: A case study. In: The 2nd International Conference on Engineering Professional Ethics and Education (ICEPEE ‘11), 17 -19 May 2011, Kuala Lumpur, Malaysia. (Unpublished)
Ahmad, Zuraida and Anuar, Hazleen (2011) Properties of compression moulding starch - nanoclay biocomposites. In: The 19th Annual International Conference on Composites/Nano Engineering (ICCE 19) , 27-30 July 2011, Shanghai, China. (Unpublished)
Ahmad, Zuraida and Yusof, Yusliza and Anuar, Hazleen and Razali, Muhammad Khairul Muhaimin (2011) The effect of water and citric acid on sago starch bio-plastics. In: 2nd International Conference on Biotechnology Engineering (ICBioE 2011), 17 -19 May 2011, Kuala Lumpur, Malaysia. (In Press)
Anuar, Hazleen and Ahmad, Zuraida and Halim, Zahurin (2010) Single kenaf fibre properties via in situ monitoring using acoustic emission. In: Simposium Kebangsaan Aplikasi Sains Matematik 2010 (SKSM), 8-10 December 2010, Johor Bahru, Johor, Malaysia. (Unpublished)
Anuar, Hazleen and Fuad, Faizah and J., Asma' and Kaiser, Mohammad Rejaul and Ahmad, Zuraida (2010) Renewable food packaging from PLA-kenaf fibre biocomposite. In: Islamic Innovation Expo 2010 (i-Inova’ 2010), 26-28 September 2010, Indoor Nilai Stadium. (Unpublished)
Anuar, Hazleen and Ahmad, Zuraida and Jozsef Gabor, Kovacs and A., Adilah (2010) Kenaf fibre reinforced poly(lactic acid) biocomposites. In: 8th Global WPC and Natural Fibre Composites Congress and Exhibition, 22–23 June 2010, Stuttgart, Germany. (Unpublished)
Anuar, Hazleen and Ahmad, Zuraida and F., Fuad (2010) Biodegradable PLA-Kenaf fibre biocomposite for cleaner environment. In: Malaysian Science and Technology Congress (MSTC 2010), 9-11 November 2010, Crystal Crown Hotel, Petaling Jaya, Malaysia. (Unpublished)
Jamal, Nur Ayuni and Anuar, Hazleen and Ahmad, Zuraida and Abd Razak, Shamsul Bahri (2010) Hazardless nanocomposite for gas barrier potential. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010), 26 - 27 January 2010, Kuala Lumpur.
Yusof, Yusliza and Ahmad, Zuraida and Sopyan, Iis (2010) Lightweight biodegradable cotton/albumen board (CAB) for sustainable environment. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010), 26 - 27 January 2010, Kuala Lumpur.
Anuar, Hazleen and Ahmad, Zuraida and Mat Ali, Adilah and Yusof, Siti Rasyidah and Fuad, Faizah (2010) An eco-plastic made of PLA-Kenaf fibre biocomposite for cleaner environment. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010), 26 - 27 January 2010, Kuala Lumpur.
Ahmad, Zuraida and Yusof, Yusliza and T.S, Le and S, Kumaran (2009) Effects of nanoclays on the structure and properties of cotton/albumen composites. In: 2nd Annual International Conference on Green Technology and Engineering, April 2009, Faculty of Engineering Malahayati University, Lampung, Indonesia.
Monograph
Halim, Zahurin and Ahmad, Zuraida and Sharif, Safian and Kalam, Anizah (2017) Investigation of surface degradation of binderless particleboards (BPB) by utilizing rattan furniture waste materials. Project Report. UNSPECIFIED. (In Press)