IIUM Repository (IREP)

Items where Author is "Abd. Rahman, Mohamed"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Item Type | No Grouping
Number of items: 19.

Article

Mohiuddin, A. K. M. and Abd. Rahman, Mohamed and A. Jabar, Julia (2015) Adoption and adaptation of Japanese manufacturing management in an automotive company of Malaysia. Advanced Materials Research, 1115. pp. 589-595. ISSN 1022-6680

Abd. Rahman, Mohamed and Mohiuddin, A. K. M. and Abdullah, Hanani (2015) Painting process improvement through six sigma approach in a Malaysian vehicle assembly company. Advanced Materials Research, 1115. pp. 596-600. ISSN 1022-6680

Abd. Rahman, Mohamed and Mohd. Salit, Sapuan and Abdan, Khalina (2014) Mechanical and thermal properties of josapine pineapple leaf fiber (PALF) and PALF-reinforced vinyl ester composites. Fibers and Polymers , 15 (5). pp. 1035-1041. ISSN 1229-9197 (Print) 1875-0052 (Online)

Banu, Asfana and Ali, Mohammad Yeakub and Abd. Rahman, Mohamed (2014) Micro-electro discharge machining of nonconductive zirconia ceramic: investigation of MRR and recast layer hardness. The International Journal of Advanced Manufacturing Technology, 75 (1-4). pp. 257-267. ISSN 0268-3768

S., Ahmad Fakhri and Jahare, Muhammad Hafiz and Abd. Rahman, Mohamed (2012) The implementation of lean manufacturing in Malaysian automotive industry. Advanced Materials Research, 576 (2012). pp. 731-734. ISSN 1022-6680

Abd. Rahman, Mohamed and Salit, Mohd. Sapuan and Abdan, Khalina (2011) Effects of process parameters on selected properties of liquid compression-molded vinyl ester sheets. Pertanika Journal of Science and Technology, 19 (1). pp. 137-142. ISSN 0128-7680

Abd. Rahman, Mohamed and Mohd. Salit, Sapuan and Mridha, Shahjahan and Abdan, Khalina (2010) Effects of simple abrasive combing and pretreatments on properties of pineapple leaf fibers (PALF) and PALF-Vinyl ester composite adhesion. Journal of Polymer-Plastics Technology and Engineering , 49 (10). pp. 972-978. ISSN 03602559 (print); 1525-6111 (online)

Abd. Rahman, Mohamed and Mohd Salit, Sapuan and Abdan, Khalina (2010) Selected properties of hand-laid and compression molded pineapple leaf fiber (PALF)-reinforced vinyl ester composites. International Journal of Mechanical and Materials Engineering (IJMME), 5 (1). pp. 68-73. ISSN 1823-0334

Abd. Rahman, Mohamed and Mohd Salit, Sapuan and Mridha, Shahjahan and Abdan, Khalina (2009) Characterization of pineapple leaf fibers from selected Malaysian cultivars. Journal of Food, Agriculture & Environment, 7 (1). pp. 235-240. ISSN 1459-0263 (O), 1459-0263 (P)

Book Chapter

Abd. Rahman, Mohamed and M. Nawawi, M. Kamarul Helmi (2011) Pultrusion of Pineapple Leaf Fibre (PALF)-reinforced vinyl ester composites: water absorption property. In: Design for manufacture: towards improved manufacturability. IIUM Press, Kuala Lumpur, pp. 162-168. ISBN 9789674181598

Monograph

A.N., Mustafizul Karim and Abd. Rahman, Mohamed (2012) Value stream mapping (VSM) of production line for a high volume manufacturing industry. Research Report. s.n, Kuala Lumpur. (Unpublished)

Conference or Workshop Item

Ali, Mohammad Yeakub and Abd. Rahman, Mohamed and Zunairi, Siti Nur Zuhaida and Banu, Asfana (2017) Dimensional accuracy of micro-electro discharge milling. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25th-27th July 2016, Kuala Lumpur, Malaysia.

Abd. Rahman, Mohamed and Ali, Mohammad Yeakub and Khairuddin, Amir Saddam (2017) Effects on vibration and surface roughness in high speed micro end-milling of Inconel 718 with minimum quantity lubrication. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25th-27th July 2016, Kuala Lumpur, Malaysia.

Abd. Rahman, Mohamed and Ali, Mohammad Yeakub and Rosli, Abdul Rahman Shah and Banu, Asfana (2017) Process capability of high speed micro end-milling of Inconel 718 with minimum quantity lubrication. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16), 25th-27th July 2016, Kuala Lumpur, Malaysia.

Ali, Mohammad Yeakub and Abd. Rahman, Mohamed and Nordin, Rosmarina (2017) Micro wire electro discharge grinding: optimization of material removal rate and surface roughness. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering, ICMAAE 2016, 25 – 27 July 2016, Kulliyyah of Engineering, IIUM, Kuala Lumpur.

Ali , Mohammad Yeakub and Abd. Rahman, Mohamed and Banu, Asfana and Adnan, Shakira and Nadia, Fatin (2016) High aspect ratio micro-EDM drilling with nano surface finish. In: The Regional Conference on Science, Technology and Social Sciences 2014 (RCSTSS 2014), 23rd-25th Nov. 2014, Cameron Highland, Pahang.

Mohiuddin, A. K. M. and Abd. Rahman, Mohamed and Julia , Abdul Jabar (2014) Adoption and adaptation of Japanese manufacturing management: a case study of an automotive company in Malaysia. In: International Conference on Advances in Manufacturing and Materials Engineering 2014 (ICAMME 2014), 23rd - 25th September 2014, Kuala Lumpur, Malaysia. (Unpublished)

Abd. Rahman, Mohamed and Mohiuddin, A. K. M. and Hanani, Abdullah (2014) Six sigma approach to improve the painting process: a case study of a Malaysian vehicle assembly company. In: International Conference on Advances in Manufacturing and Materials Engineering 2014 (ICAMME 2014), 23rd - 25th September 2014, Kuala Lumpur, Malaysia. (Unpublished)

Karim, A.N. Mustafizul and Abd. Rahman, Mohamed and Hj. Yusop, Nornilawati (2014) Mitigation of WIP-related problems at an IC production line through a suitable inspection sampling plan. In: International Conference on Industrial Engineering and Operations Management, 7th-9th Jan. 2014, Bali, Indonesia.

This list was generated on Thu Sep 21 00:37:41 2017 +08.